No description available.

Cette thèse porte sur la ventilation par mélange à haute induction pour le bâtiment au moyen de diffuseurs d’air innovants munis de promoteurs de tourbillons. Il s’agit d’inserts lobés, introduits au sein de diffuseurs d’air commerciaux, sans en modifier le processus de fabrication. L’innovation est née de travaux antérieurs et a fait récemment l’objet d’un brevet européen. Sa mise en situation à l’échelle 1 en conditions typiques de chauffage et de climatisation, constitue l’objectif premier des présents travaux. Par une démarche expérimentale, l’impact des inserts lobés sur la topologie de l’écoulement moteur, sur le confort thermique induit en zone d’occupation d’une cellule climatique thermiquement gardée, et sur les pertes de charges et le bruit générés, sont évalués. Les écoulements moteurs sont analysés par PIV 2D2C grand champ, et le confort thermique est évalué en zone d’occupation à l'aide d’un ensemble de capteurs ponctuels de vitesse et de température et du modèle PMV/PPD de Fanger. Les résultats montrent que les inserts lobés introduits dans le diffuseur, favorisent le mélange du jet qui en est issu avec l’air ambiant à traiter. Le confort thermique en zone d’occupation est amélioré de façon significative, par rapport au cas de référence du même diffuseur sans inserts. L’impact des inserts sur l’acoustique et les pertes de charges n’est pas significatif, ce qui valide l’innovation pour son application immédiate dans le bâtiment. En dernière partie, nous avons comparé la performance des diffuseurs innovants munis d’inserts lobés au diffuseur vortex, présenté sur le marché de la diffusion de l’air comme étant doté d’une grande capacité de mélange, suite à la mise en rotation du jet à l’aide d’ailettes profilées. Les résultats ont montré que l’encastrement au plafond du diffuseur vortex préconisé par le fabricant, dont il résulte l’adhérence immédiate du jet par effet Coanda, inhibe le mouvement de rotation escomptée, et sa performance dans ces conditions est inférieure à celle du diffuseur à inserts lobés. Il résulte de ce constat, la nécessité d’une installation du diffuseur vortex sur conduite apparente pour que sa performance soit réelle ; cela est envisageable pour des locaux commerciaux ou industriels de grande hauteur sous plafond. Les diffuseurs lobés encastrés au plafond, dont on a ainsi démontré la performance, sont parfaitement adaptés aux espaces de bureaux ou d’habitations de faibles hauteurs sous-plafond, et répondent par conséquent au réel besoin de la haute induction dans ce type de locaux. / This thesis deals with high-induction mixing ventilation for buildings using innovative air diffusers equipped with vortex promoters. These are lobed inserts, introduced into commercial air diffusers, without modifying the manufacturing process. The innovation was born from previous work and has recently been the subject of an European patent. The first objective of the present work is to conduct full scale experiments under typical heating and air conditioning conditions. By an experimental approach, the impact of the lobed inserts on the airflow and jet pattern, on the thermal comfort induced in the occupied zone of a thermally guarded climate chamber, and on the pressure drop and the noise generation. Airflow pattern is analyzed by large scale PIV 2D2C, and thermal comfort is evaluated in the occupied zone using a set of temperature and speed sensors and Fanger's PMV / PPD model. The results show that the lobed inserts introduced into the diffusers enhance the mixing between the jet and ambient air whose to be treated. The thermal comfort in the occupied zone is significantly improved, compared to the reference case of the same diffuser without inserts. The impact of the inserts on the acoustics and the pressure drop is not significant, which validates the innovation for its immediate application in buildings. Finally, we compared the performance of innovative diffusers with lobed inserts to the vortex diffuser, presented in the air diffusion market as a high mixing diffuser, because of the rotation generated by profiled fins. The results showed that when the diffuser is flush mounted to the ceiling, which is recommended by the manufacturer, the immediate attachment of the jet due to the Coanda effect inhibits the expected rotational movement. Its performance under these conditions is lower to that of the diffuser with lobed inserts. It follows from this finding that the installation of the vortex diffuser on a free pipe is necessary for its best performance ; this can be performed for high ceiling commercial buildings or industrial buildings. Ceiling flush mounted diffusers with lobed inserts, which we have demonstrated their performance, are perfectly suited for office spaces or homes with low ceiling heights, and therefore meet the real need for high induction in this type of buildings.

Made available in DSpace on 2014-06-11T19:23:39Z (GMT). No. of bitstreams: 0 Previous issue date: 2009-09-08Bitstream added on 2014-06-13T19:09:39Z : No. of bitstreams: 1 lacerda_jf_me_ilha.pdf: 4631781 bytes, checksum: cad33ad7c5cac9de6cec08fd94b419e7 (MD5) / Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) / Nesse trabalho resolve-se numericamente o escoamento em difusores radiais, os quais têm sido utilizados como modelo para o estudo do escoamento em válvulas automáticas de compressores de refrigeração. As equações governantes do escoamento, escritas no sistema de coordenadas cilíndricas, são resolvidas utilizando um código numérico baseado no Método dos Volumes Finitos. O Método da Fronteira Imersa, em conjunto com o Modelo Físico Virtual, foi implementado no código numérico e utilizado para representar a região sólida imersa no escoamento. Inicialmente, o código numérico foi utilizado para resolver o problema do escoamento em torno de um cilindro de base quadrada, como parte do processo de validação do código. O confronto dos resultados numéricos com dados da literatura indicou a validação parcial do código. Posteriormente, realizou-se um estudo preliminar do comportamento da solução do escoamento no difusor radial em relação a diversos parâmetros geométricos e de simulação numérica, com o objetivo de identificar a configuração numérica capaz de fornecer, simultaneamente, resultados satisfatórios com o menor custo computacional. Usando esta configuração, o código numérico foi validado através da comparação dos resultados da distribuição de pressão sobre o disco frontal (palheta) do difusor com dados experimentais da literatura, para duas distâncias entre disco frontal e disco inferior (assento), s=0,02 e 0,025 cm, e números de Reynolds variando entre 1500 e 2500. As comparações entre esses resultados mostraram que a metodologia utilizada é adequada para estudar o problema. Finalmente, a geometria do disco inferior foi modificada através da inserção de um chanfro com três ângulos de inclinação (30, 45 e 60º), com o objetivo de avaliar sua influência sobre o comportamento da distribuição de pressão sobre o disco frontal... / In this work the flow in radial diffusers, which have been used as a model to study the flow in refrigeration compressors valves, is solved numerically. The governing equations, written in cylindrical coordinates, are solved using a numerical code based on the Finite Volume Method. The Immersed Boundary Method, with the Virtual Physical Method, was implemented in the numerical code and used to represent the solid region immersed in the flow. Initially, the numerical code was used to solve the flow around a square base cylinder, as part of the code validation. The comparison of the numerical results with literature data indicated the partial validation of the code. Afterwards it was performed a preliminary study of the behavior of the flow solution in the radial diffuser relating to several geometrical and numerical parameters, with the objective of identifying a configuration capable of providing, simultaneously, satisfactory results with the smaller computational cost. Using this configuration, the numerical code was validated through the comparison with experimental pressure distribution on the frontal disk (reed) for two gaps between the frontal disk and inferior disk (seat), s=0.020 and 0.025 cm, and Reynolds numbers varying between 1500 and 2500. These comparisons have shown that the implemented methodology is suitable to study this problem. Finally, the inferior disk geometry was modified by inserting a chamfer with three inclination angles (30, 45 e 60º), with the objective of evaluating its influence on the pressure distribution on the frontal disk. The decreasing of the total pressure gradient through the flow for increasing inclination angles indicates less amount of energy to drive the flow. This is an important result that can be used to design refrigeration compressors with lower compression power

Orientador: José Luiz Gasche / Banca: Sérgio Said Mansur / Banca: Aristeu da Silveira Neto / Resumo: Nesse trabalho resolve-se numericamente o escoamento em difusores radiais, os quais têm sido utilizados como modelo para o estudo do escoamento em válvulas automáticas de compressores de refrigeração. As equações governantes do escoamento, escritas no sistema de coordenadas cilíndricas, são resolvidas utilizando um código numérico baseado no Método dos Volumes Finitos. O Método da Fronteira Imersa, em conjunto com o Modelo Físico Virtual, foi implementado no código numérico e utilizado para representar a região sólida imersa no escoamento. Inicialmente, o código numérico foi utilizado para resolver o problema do escoamento em torno de um cilindro de base quadrada, como parte do processo de validação do código. O confronto dos resultados numéricos com dados da literatura indicou a validação parcial do código. Posteriormente, realizou-se um estudo preliminar do comportamento da solução do escoamento no difusor radial em relação a diversos parâmetros geométricos e de simulação numérica, com o objetivo de identificar a configuração numérica capaz de fornecer, simultaneamente, resultados satisfatórios com o menor custo computacional. Usando esta configuração, o código numérico foi validado através da comparação dos resultados da distribuição de pressão sobre o disco frontal (palheta) do difusor com dados experimentais da literatura, para duas distâncias entre disco frontal e disco inferior (assento), s=0,02 e 0,025 cm, e números de Reynolds variando entre 1500 e 2500. As comparações entre esses resultados mostraram que a metodologia utilizada é adequada para estudar o problema. Finalmente, a geometria do disco inferior foi modificada através da inserção de um chanfro com três ângulos de inclinação (30, 45 e 60º), com o objetivo de avaliar sua influência sobre o comportamento da distribuição de pressão sobre o disco frontal... (Resumo completo, clicar acesso eletrônico abaixo) / Abstract: In this work the flow in radial diffusers, which have been used as a model to study the flow in refrigeration compressors valves, is solved numerically. The governing equations, written in cylindrical coordinates, are solved using a numerical code based on the Finite Volume Method. The Immersed Boundary Method, with the Virtual Physical Method, was implemented in the numerical code and used to represent the solid region immersed in the flow. Initially, the numerical code was used to solve the flow around a square base cylinder, as part of the code validation. The comparison of the numerical results with literature data indicated the partial validation of the code. Afterwards it was performed a preliminary study of the behavior of the flow solution in the radial diffuser relating to several geometrical and numerical parameters, with the objective of identifying a configuration capable of providing, simultaneously, satisfactory results with the smaller computational cost. Using this configuration, the numerical code was validated through the comparison with experimental pressure distribution on the frontal disk (reed) for two gaps between the frontal disk and inferior disk (seat), s=0.020 and 0.025 cm, and Reynolds numbers varying between 1500 and 2500. These comparisons have shown that the implemented methodology is suitable to study this problem. Finally, the inferior disk geometry was modified by inserting a chamfer with three inclination angles (30, 45 e 60º), with the objective of evaluating its influence on the pressure distribution on the frontal disk. The decreasing of the total pressure gradient through the flow for increasing inclination angles indicates less amount of energy to drive the flow. This is an important result that can be used to design refrigeration compressors with lower compression power / Mestre

Los emisores submarinos son preferibles para la descarga de aguas residuales domesticas tratadas, debido a la capacidad de asimilación del mar como una opción más económica. Si se eligen los sistemas de salida al mar, la ubicación es fundamental para evitar el retorno de las aguas residuales a la zona costera y la recuperación del ecosistema marino. Sobre la base de la regulación del control de descarga de efluentes que exige la Autoridad Nacional del Agua (ANA) de la República Democrática del Perú, la concentración de bacterias debe estar por debajo de un cierto valor en el área protegida. Esta tesis está basada en el método de investigación aplicativo, debido a que en el Perú no existe mucha información científica con respecto a los emisores submarinos. Por ello, esta investigación busca aumentar información científica de tal modo que para los siguientes proyectos que tengan que ver con emisores submarinos sean más eficientes a nivel hidráulico. Por otra parte, los efectos principales que influyen en la dilución son las corrientes costeras generadas por el viento y el transporte de aguas residuales en regiones costeras abiertas, como se encuentra en La Chira. Las predicciones del modelo de dispersión son precisas si cuentan con las características físicas del emisor submarino, del efluente y del océano, ya que nos brindan una perspectiva clara para la planificación del emisor submarino. En este estudio, se compara el caudal de diseño con el método de crecimiento geométrico, el cual es recomendado por la Organización Mundial de la Salud (OMS), con el caudal real del proyecto, donde se verifica que ambos caudales se aproximan. También, se verificó la capacidad hidráulica del emisor submarino para identificar las pérdidas de cargas totales que se producen a lo largo de todo el emisor. Además, el Visual Plumes, el cual es un software que genera modelos de dispersión de efluente en un cuerpo de agua, se utilizó para la dilución de campo cercano y la dilución de campo lejano del contaminante. Los resultados del modelo de dilución de campo cercano y de campo lejano muestran que el emisor submarino de La Chira cumple con las regulaciones legales ambientales. / The submarine outfalls are the preferred solution for discharging treated domestic wastewaters due to the ocean’s assimilative capacity, as a cheaper option. If the exit systems to the sea are chosen, location is key to avoid the return of the wastewaters to the coastal area and for the marine ecosystem restoration. According to the effluent discharge control regulations dictated by the National Water Authority (Autoridad Nacional del Agua, ANA) of the Republic of Peru, the bacteria concentration level must be under a certain level in the protected area. This thesis is based on the applied research methodology, since there is not much scientific information available regarding submarine outfalls in Peru. For this reason, this research seeks to increase the scientific information so that the next projects involving submarine outfalls are more efficient in hydraulically. In the other hand, the main effects impacting dilution are coastal currents generated by the wind and the wastewaters flow into open coastal regions, as found in La Chira. The dispersion model predictions are accurate if they have the physical characteristics of the submarine outfall, the effluent and the ocean, since they provide a clear perspective for the submarine outfall planning. In this study, we compared the design flow rate with the geometric increase method recommended by the World Health Organization (WHO) with the real flow rate of the project, and it was verified that both flow rates are similar. Also, the submarine outfall hydraulic capacity was verified to identify the losses of total loads produced throughout the outfall. Furthermore, the Visual Plumes, a software that generates dispersion models of effluents in body of water, was used for the near-field and far-field dilutions of the contaminant. The results of near-field and far-field dilutions model show that the submarine outfall of La Chira meets the legal environmental regulations. / Tesis

The master thesis deals with flow modeling in the CFD program. By means of which the opti-mal version of the air distribution diffuser in the sports hall will be selected. The first variant will bring fresh air through textile diffusers. The second variant will bring fresh air through flooded large circular diffusers. The tested parameter of the indoor environment will be the flow velocity and the age of the air. The better-performing version will be processed as an implementation documentation.

The diploma thesis deals deals with the designing and assessment of the two variants of cooling and humidifying the air in the production hall for cotton in Humpolec. The system is proposed to fulfil hygienic, operational, economic and functional requirements for indoor microclimate of the production hall. The task of this system is the transport of cooler air to interior and the covering of heat gains all year round. The equipment is also designed for the regulation of air humidity in the interior. The theoretical part is devoted to air humidification and air humidification device. Calculation of the project and then a specific proposal, two variants for air distribution level studies. Both variants are treated as project documentation. Experimental part is devoted to the measurement on the measuring path containing adiabatic humidifier in the laboratory. The benefit of the experiment is to verify the data from the manufacturer adiabatic humidifier which we can assess the practical use of the product.

Tesis por compendio / [ES] El control de ruido ambiental es una preocupación de primera magnitud para las sociedades avanzadas, debido a los problemas derivados que ocasionan en la salud de los ciudadanos. Una de las soluciones más extendidas para el control del ruido en su fase de transmisión en la utilización de pantallas acústicas. La aparición de nuevos materiales formados por redes de dispersores acústicos aislados, denominados cristales de sonido, está revolucionando el campo del apantallamiento acústico, posibilitando el avance tecnológico de esta área. Así, en los últimos años, las pantallas acústicas basadas en cristales de sonido se han posicionado como una alternativa viable a las pantallas acústicas tradicionales, puesto que ofrecen múltiples ventajas frente a las soluciones actuales. En el presente trabajo se muestra primeramente una recopilación de los avances realizados en el campo del apantallamiento acústico mediante esta tipología de pantallas. No obstante, aún existen líneas de investigación abiertas en esta área, que es necesario abordar para conseguir el objetivo de aplicar esta tecnología como atenuadores de sonido en las infraestructuras de transporte. Durante el periodo de formación de la doctoranda, se ha trabajado en algunas de las líneas de investigación activas en este campo del apantallamiento acústico. Una de estas investigaciones condujo al descubrimiento de interferencias entre los efectos de la resonancia y la dispersión múltiple de los cristales de sonido cuando estos efectos se producen en rangos de frecuencia cercanos. También hemos diseñado un nuevo dispositivo de reducción de ruido basado en cristales de sonido, utilizando herramientas de optimización multiobjetivo, que permitan apantallar y reflejar de forma difusa el ruido. El empleo de esta nueva herramienta de diseño identificó la necesidad de realizar un estudio comparativo de los métodos de simulación más utilizados para estimar el rendimiento de los dispositivos basados en cristales de sonido. Por último, hemos realizado un estudio psicoacústico para determinar la percepción de la reducción de molestia que proporcionan las pantallas acústicas basadas en cristales sonido y las barreras tradicionales, determinando si los parámetros objetivos que evalúan su rendimiento coinciden con la respuesta subjetiva de los usuarios. / [CA] El control de soroll ambiental és una preocupació de primera magnitud per a les societats avançades, a causa dels problemes derivats que ocasionen en la salut dels ciutadans. Una de les solucions més esteses per al control del soroll en la seua fase de transmissió en la utilització de pantalles acústiques. L'aparició de nous materials formats per xarxes de dispersors acústics aïllats, denominats cristals de so, està revolucionant el camp de l'apantallament acústic, possibilitant l'avanç tecnològic d'esta àrea. Així, en els últims anys, les pantalles acústiques basades en cristals de so s'han posicionat com una alternativa viable a les pantalles acústiques tradicionals, ja que oferixen múltiples avantatges enfront de les solucions actuals. En el present treball es mostra primerament una recopilació dels avanços realitzats en el camp de l'apantallament acústic per mitjà d'esta tipologia de pantalles. No obstant això, encara hi ha línies d'investigació obertes en esta àrea, que és necessari abordar per a aconseguir l'objectiu d'aplicar esta tecnologia com a atenuadors de so en les infraestructures de transport. Durant el període de formació de la doctoranda, s'ha treballat en algunes de les línies d'investigació actives en este camp de l'apantallament acústic. Una d'estes investigacions va conduir al descobriment d'interferències entre els efectes de la ressonància i la dispersió múltiple dels cristals de so quan estos efectes es produïxen en rangs de freqüència pròxims. També hem dissenyat un nou dispositiu de reducció de soroll basat en cristals de so, utilitzant ferramentes d'optimització multiobjectiu, que permeten apantallar i reflectir de forma difusa el soroll. L'ús d'esta nova ferramenta de disseny va identificar la necessitat de realitzar un estudi comparatiu dels mètodes de simulació més utilitzats per a estimar el rendiment dels dispositius basats en cristals de so. Finalment, hem realitzat un estudi psicoacústic per a determinar la percepció de la reducció de molèstia que proporcionen les pantalles acústiques basades en cristals so i les barreres tradicionals, determinant si els paràmetres objectius que avaluen el seu rendiment coincidixen amb la resposta subjectiva dels usuaris. / [EN] Control of environmental noise is a major concern for advanced societies because of the resulting problems for citizens' health. One of the most widespread solutions for controlling noise in its transmission phase is the use of acoustic screens. The emergence of new materials made up of arrays of isolated acoustic scatterers, called sonic crystals, is revolutionizing the field of acoustic screening. In recent years, acoustic screens based on sonic crystals have positioned themselves as a viable alternative to traditional acoustic screens, as they offer multiple advantages over current traditional solutions. This Doctoral dissertation compiles the advances in the field of acoustic screening using this type of sonic crystals. However, there is still active research in this area which needs to be addressed and studied in order to apply this technology as noise reduction devices in transport infrastructures. Therefore, during the PhD student's training period, we have researched the acoustic phenomena produced by isolated scatterers in order to better understand the physical phenomena behind the lasts designs of this type of screen. One of these researches led to the discovery of interferences between the effects of resonance and multiple scattering of sonic crystals when occurring in nearby frequency ranges. Also we have designed a new noise reduction device based on sonic crystals, using multi-objective optimization tools, which would block and diffuse the noise. This new designing tool identified the need for a comparative study of the most commonly used simulation methods to estimate the performance of devices based on sonic crystals. Finally, we have carried out a psychoacoustic study that determined the perception of the annoyance reduction provided by acoustic screens based on sonic crystals and traditional barriers, determining whether the objective parameters that evaluate their performance match to the subjective response of the users. / Agradezco al Ministerio de Ciencia e Innovación por la ayuda concedida dentro del programa Doctores Industriales. Asimismo, a mi tutor en empresa Dr. Juan José Martín Pino, por posibilitar la realización de esta investigación dentro de la empresa BECSA. Al Departamento de Física Aplicada de la Universitat Politècnica de València, a la Comisión Académica del Programa de Doctorado de Matemáticas y al Centro de Tecnologías Físicas: Acústica, Materiales y Astrofísica. / Peiró Torres, MDP. (2021). Research of the acoustic phenomenon produced by isolated scatterers and its applicability as a noise reducing device in transport infrastructures. Search for an optimised and sustainable design [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/164903 / Compendio