In this thesis, the physical layer of the Single Channel Ground and Airborne Radio System (SINCGARS) was analyzed in order to gain insight into the bit-error-rate (BER) performance in various channel conditions. The BER performance of the radio was examined using theoretical, simulation, and experimental techniques. These results are presented in graphical form as the probability of bit error as a function of the energy per bit to noise power spectral density ratio. The results of the simulation show excellent agreement with the theory, while the experimental results deviate from theory at higher signal-to-noise levels. This suggests sub-optimal SINCGARS performance, most notably in the signal power to noise power range where reliable data transmission should take place.

Thesis (M.S. in Electrical Engineering)--Naval Postgraduate School, June 2005. / Thesis Advisor(s): Frank Kragh, Herschel H. Loomis. Includes bibliographical references (p. 55-56). Also available online.

No description available.

Univ., Diss.--Göttingen, 2006.

Thesis (MScEng (Electrical and Electronic Engineering))--University of Stellenbosch, 2005. / The aim of this thesis is to implement a Digital Audio Broadcasting (DAB) system in a Software Defined Radio (SDR). The physical modulation part of the DAB transmitter for one of the transmission modes as well as its receiver is to be implemented and tested in the SDR. DAB transmission mode II is implemented.

<p>This thesis describes the design and implementation of a Digital Audio Broadcasting (DAB) System developed using C++ Language and SystemC libraries. The main aspects covered within this report are the data structure of DAB system, and some interesting points of SystemC Library very useful for the implementation of the final system. </p><p>It starts with a introduction of DAB system and his principals advantages. Next it goes further into the definition of data structures of DAB, they are FIC, MSC, and DAB audio frame, explained with MPEG and PAD packets. Later on this chapter there is an explanation of the SystemC library with special attention on the features that I used to implement the system. This features are the events used in the communication between processes and the interfaces needed for sending and receiving the data.</p><p>With all these points covered is quite easy for a reader to understand the implementation of the system, despite this point is covered in the last chapter of the thesis. The implementation is here explained in two different steps. The first one explain how is formed the DAB audio frame by means of MPEG frames that are wrote in channel by producer interface, this frames are readed by consumer interface. For this purpose I have created some classes and structures that are explained in this part. The second part explain how I obtain the DAB transmission frame which is obtained creating MSC frames, that are big data structures formed by groups of DAB audio frames, therefore there are some functions that act like a buffer and add audio frames to the MSC data structure. Of independent way there is the FIC frame that is generated of random way and its added to the transmission frame.</p>

This thesis describes the design and implementation of a Digital Audio Broadcasting (DAB) System developed using C++ Language and SystemC libraries. The main aspects covered within this report are the data structure of DAB system, and some interesting points of SystemC Library very useful for the implementation of the final system. It starts with a introduction of DAB system and his principals advantages. Next it goes further into the definition of data structures of DAB, they are FIC, MSC, and DAB audio frame, explained with MPEG and PAD packets. Later on this chapter there is an explanation of the SystemC library with special attention on the features that I used to implement the system. This features are the events used in the communication between processes and the interfaces needed for sending and receiving the data. With all these points covered is quite easy for a reader to understand the implementation of the system, despite this point is covered in the last chapter of the thesis. The implementation is here explained in two different steps. The first one explain how is formed the DAB audio frame by means of MPEG frames that are wrote in channel by producer interface, this frames are readed by consumer interface. For this purpose I have created some classes and structures that are explained in this part. The second part explain how I obtain the DAB transmission frame which is obtained creating MSC frames, that are big data structures formed by groups of DAB audio frames, therefore there are some functions that act like a buffer and add audio frames to the MSC data structure. Of independent way there is the FIC frame that is generated of random way and its added to the transmission frame.