Spelling suggestions: "subject:"digital bildbehandling."" "subject:"figital bildbehandling.""
1 |
Methods for automatic inspection of weld geometryEriksson, Inger January 2008 (has links)
<p>The earlier in the production chain discontinuities in the weld area are discovered the better and less expensive it is to modify the weld. If the weld is bigger than necessary the cost and the weight grow, and if the weld is undersized the strength is put at risk. This report contains a summary of a literature survey for finding means for optical measurements of weld geometry. Some of the articles are about existing devices that can measure welds. One is hand-held and is applied on the weld afterwards and compares the data with pre set parameters. Experiments were performed with two different systems to evaluate their capability to capture the weld geometry. The first system is an in - house built system with a laser line diode and a CMOS - camera, the other system is scanCONTROL, and is a device with integrated camera and laser line. Matlab was used to process and analyse data from both systems. Experiments with the first system ended when it was quite obvious that it did not meet the expected result. The laser line projection was too short to cover enough of the weld area and it was hard to process the image to find defects in the weld area. The data from the scanCONTROL system was ready to use and it was quite easy to find different defects and discontinuities in the weld area. It is possible to find the geometry of the weld and it is possible to find defects like spatter, undercut and sharp edges, with laser line projection and camera. The equipment is important in order to extract data useful for analysis.</p>
|
2 |
Methods for automatic inspection of weld geometryEriksson, Inger January 2008 (has links)
The earlier in the production chain discontinuities in the weld area are discovered the better and less expensive it is to modify the weld. If the weld is bigger than necessary the cost and the weight grow, and if the weld is undersized the strength is put at risk. This report contains a summary of a literature survey for finding means for optical measurements of weld geometry. Some of the articles are about existing devices that can measure welds. One is hand-held and is applied on the weld afterwards and compares the data with pre set parameters. Experiments were performed with two different systems to evaluate their capability to capture the weld geometry. The first system is an in - house built system with a laser line diode and a CMOS - camera, the other system is scanCONTROL, and is a device with integrated camera and laser line. Matlab was used to process and analyse data from both systems. Experiments with the first system ended when it was quite obvious that it did not meet the expected result. The laser line projection was too short to cover enough of the weld area and it was hard to process the image to find defects in the weld area. The data from the scanCONTROL system was ready to use and it was quite easy to find different defects and discontinuities in the weld area. It is possible to find the geometry of the weld and it is possible to find defects like spatter, undercut and sharp edges, with laser line projection and camera. The equipment is important in order to extract data useful for analysis.
|
3 |
Distribution and individual watermarking of streamed content for copy protection /Stenborg, Karl-Göran, January 2005 (has links)
Lic.-avh. Linköping : Linköpings universitet, 2005.
|
4 |
Techniques for implementing embedded domain specific languages in dynamic languages /Lejdfors, Calle. January 2006 (has links) (PDF)
Lic.-avh. Lund : Lunds universitet, 2006.
|
5 |
Football on mobile phones : algorithms, architectures and quality of experience in streaming video /Sun, Jiong, January 2006 (has links)
Diss. Umeå : Umeå universitet., 2006.
|
6 |
Very low bitrate facial video coding : based on principal component analysis /Söderström, Ulrik, January 2006 (has links)
Licentiatavhandling (sammanfattning) Umeå : Umeå University, 2006. / Härtill 5 uppsatser.
|
7 |
Very low bitrate video communication : a principal component analysis approach /Söderström, Ulrik, January 2008 (has links)
Diss. (sammanfattning) Umeå : Umeå universitet, 2008. / Härtill 7 uppsatser.
|
8 |
Digital bildöverföring i hemsjukvården : vilka konsekvenser kan det få ?Halvordsson, Ulrika, Bäckström, Karin January 2002 (has links)
No description available.
|
9 |
Digital bildöverföring i hemsjukvården : vilka konsekvenser kan det få ?Halvordsson, Ulrika, Bäckström, Karin January 2002 (has links)
No description available.
|
10 |
Vision guided robot : a solution för parts handling - SAAB AutmobileRamos, Wilbert Rivera January 2007 (has links)
No description available.
|
Page generated in 0.085 seconds