This diploma thesis deals with the project documentation of villa house Kasalka in Humpolci. The house is situated in the region Highland in the village Humpolec, cadastral territory of Humpolec. The building is designed as a five-story brick building, where the vertical structures are designed from a structural system POROTHERM. The external walls are insulated. The building is covered with three flat roof decks at different heights, two of which are walkable and used as terraces. The building includes Garage for ten cars of type 1a and small establishment an office type.

This thesis describes the design of a kindergarten in Novy Jicin. It is a detached building on a large and gently sloping land. Visually, kindergarten divided into three parts and it is on two-storey part of themselves compartment attached with two-storey in the middle part. The building has a rugged design (form L-shaped). The building is brick sand-lime blocks with contact thermal insulation system, based upon the strips foundation, nobasement and covered with a warm flat roof. In the single-storey part there is the only MS (max. 25 children). In the middlesection of two-storey there is a main part of kindergarden on the first floor and kindergarten facilities located on the second floor there is a small department with special classes (max. 10 children). The layout of the building is consistent with the operation of kindergartens, fulfill the requirements for barrier-free use, safety, fire resistance and overall stability. The building includes parking for 15 cars. The work includes project documentation for the construction and specialization.

The diploma thesis was elaborated for as part of design documentation for new multifunctional building in Litovel. The building will be used for purposes of bus and train station, another way for administration purposes. The building contains the second and a third floor with a modern look suitably fits into the surrounding countryside. The significant emphasis was on both nice appearance of the building, so the correct process engineering and dispositional solution. The building is designed so that in terms of design and implementation easily accomplishable. Furthermore, to meet all the requirements for building physics and fire safety. During seminar work was solved problems of summer overheating of the room situated on the south side of the building. For the preparation of project documentation for construction was used CAD software and specialized software for structural calculations of statics and construction.

Abstract This diploma thesis deals with the design documentation of a block of flats. The block of flats is supposed to be situated in South Moravia, Znojmo district, in Olbramovice village, cadastral area no. 709930 – Olbramovice u Moravskeho Krumlova. The building is designed as a brick building with a contact thermal insulation system. Vertical constructions are designed from the Porotherm structural system. Horizontal constructions are designed as reinforced concrete structure. Foundation structures are designed from concrete. The object is roofed with a warm flat roof. The object has four floors. On the ground floor is technical hinterland and also one flat is designed to be barrier-free. The other floors are individual flats. There are ten flats in the building. Five flats have their own loggia and two flats have terrace. The building is newly built and it has a L-shaped plan.

The aim of my master’s thesis is a project of a new apartment building at a level of the documentation for the structure realization. The thesis contains text, drawings and calculation part. The house is designed as a detached house. Residential house is situated in flat terrain. The building is full basement with four above-ground floor. The house has 16 housing units. The construction system is a combined brick. The structural system of the basement part is made up of permanent shuttering. The floors are of brick blocks HELUZ. In the middle of the building is constructed elevator. The ceiling structure is made of prefabricated prestressed panels Spiroll. The roof consists of single-layer flat roof. The thesis also includes thermal and technical expertise and the calculation of the foundation structure.

The theme of this diploma thesis are the issue of energy evaluation of buildings and the reduction of energy consumption in the Czech legal system in the theoretical part, an analysis of energy consumption of the judged building in an old and new state in the calculation part and an energy audit of the main building of SRC Lihovar in Třemošnice according to Decree no. 480/2012 Coll. The three-storey main building of sports and rehabilitation center is located on the southern edge of city Třemošnice and it used to be a distillery until it has been renovated in 2013. There is a restaurant with a bowling room, hotel with two conference lounges, wellness, fitness and a swimming pool. The heat source for this building are two gas boilers, three heat pumps and solar collector array. There is partly forced and partly natural ventilation installed in the building.

The diploma thesis is concerned with the swimming pool compound which is situated in the area of the Czech-Moravian Highlands, in the town Humpolec and it contains the complete documentary materials (documentation) for the execution of the project, fire safety solution to the building with respect to building physics, structural assess of wooden constructions and air- conditioning of the swimming hall. In the swimming compound there is a swimming hall with five swimming pools with the total water area of 605,4 m2 (swimming pool, the swimming pool for non-swimmers, relaxing swimming pool, whirpool, wading pool) and other additional services – four saunas with bar, massages,solarium and two buffets. The capacity of the swimming hall is 286 persons, the capacity of the whole compound is 418 persons. As for the shape of the building, it is designed as five rectangulars of different heights embedded into each other. Under the part of the swimming centre there is a basement and its external ground plan size is 61,33m*52,83. The basement serves as utility rooms of the whole building. The load-bearing construction of the swimming hall is designed using beam girders and pillars, made of glued laminated timber. In the rest of the building there is a brick construction system. Around the swimming hall there is a glass fronted facade.

This thesis solves new building multifunctional building in Brno in the form of documentation for construction. The work contains text, drawings and calculation part. The building is designed as a detached and located in a slightly sloping terrain. The new building is designed as a four-storey with basement and three floors. The facility is designed sixteen and four residential rental units. The structural system is a cross- walled ceramic fittings. Horizontal structures ceilings are made of precast filigree ceiling tiles with nadbetonovanou distribution plates. The roof is designed as a single-layer flat. Part of the main road in the building is designed passenger elevator. The work process basic assessment of building in terms of building physics and approximate calculation of the base area.

The aim of this master´s thesis is a project of a new building of a flat house situated in the cadastral area of Kunstat. The building site is sloping towards south and east. The building is sitting on the suburb of the village and contains three floors above ground level and it partitially includes basement. The purpose of this building is to accommodate foreign pensioners (German, Austrian) as there is demand on the market and in future when the trend changes it will be converted in to normal flat house for young families. The roof is constructed as a flat single skin roof. In the ground floor (basement) there is a surgery, food shop and newsagent, gym, swimming room and utility rooms. A restaurant, kitchen, social room, chapel, utility rooms and employees dressing rooms are situated in the first floor. The flats are accessible only for the flat owners through a door. The following other two storeys includes only flats. For the main wall structural system we have used a shuttered wall system. Documentation has been prepared for this building construction. The graphical part of this documentation has been processed in the AUTOCAD software.

Diploma thesis describes the design and processing of project documentation of the apartment building. The apartment building is located in the central part of the city of Brno, in the district of Štýřice. The building has 5 floors. Its basementless with flat roof and it is based on the footings of plain concrete. Load-bearing, peripheral walls and partitions are designed from ceramic blocks POROTHERM. Ceiling construction is designed to be assembled of ceramic ceiling fittings MIAKO built on POT supports. Peripheral walls of all floors are insulated with external thermal insulation composite system ETICS with thermal insulation of mineral wool. In the place of the plinth is wool replaced by XPS polystyrene. In the facade there are anchored wooden lattice constructions using ProPasiv anchors. These constructions are covered by façade cladding sheets CEMBRIT METRO and they devide whole building into separate units. There is housing and communal part of the building. On the first floor there are storage areas, the main service room, utility room and two barrier-free apartments. In the second to the fifth floor there are 9 residential units, one of which is designed as duplex apartment . All floors are connected by staircase and wheelchair lift. Parking for 17 cars is designed in front of the building . Two parking spaces are wheelchair accessible.