The subject of this diploma thesis is the design of deep foundation highway bridge on D3 motorway in km 112.574, over Bošilecký stream and evaluation of geomorphological, geological and hydrogeological conditions and perform static calculation bridge foundation

The project is newly built wellness hotel in the cadastral Svatý Kopeček, the town of Olomouc, district Olomouc. The house is in a secluded street in Darwin. On the territory are restrictions concerning the parameters solved object. Notably the location, number of floors and the percentage of stopping. This is a three-storey, basement building with a flat roof. The building is based on the footings of plain concrete and reinforced concrete footings. Supporting, peripheral and partition walls are designed from ceramic blocks POROTHERM in the upper floors of concrete formwork and fittings in the basement. Ceiling structure is designed using locally supported reinforced concrete slabs. The entire building is divided into several sections. The 1s there is an underground garage and wellness. In 1.NP is a restaurant and facilities associated with the operation of the restaurant and hotel. In 2.NP and 3.NP are single rooms. Total capacity is 155 people and has 16 employees. To the building are three main entrances. Two of them are designed as public entrance to the restaurant and hotel. The third is the entrance for staff and supplies. Among other inputs that lead from the exterior of the building is the entrance to the restaurant terrace. Another entry is possible from the underground garage to wllnessu. The proposed facility is designed wheelchair. Before the building is designed parking for 27 cars and underground garage for 44 cars. Five of parking places are for disabled people.

This thesis describes the design and processing of project documentation multifunctional house. The multifunctional building is located in the central part of the city of Brno, in the district of Štýřice. This is a five-storey, basementless building with a flat roof on two levels. The building is based on foundations made of plain concrete. Supporting, peripheral and partition walls are designed from ceramic blocks POROTHERM. Ceiling construction is designed to be assembled of ceramic ceiling fittings MIAKO stored on POT beams. External walls of all floors are insulated using an external ETICS with thermal insulation made of mineral wool, which is replaced by XPS polystyrene used for plinth. Part of the facade is designed as ventilated, consisting of trusses of wood and sheathed by cladding panels CEMBRIT METRO. This architecturally divide the building into separate units. The building includes parts of the administrative, residential parts and parts for business purposes. On the first floor there are areas of common storage area of the apartment house, the main utility room, utility room. Furthermore, there is an administrative part, where are the reception facilities for reception, sanitary facilities for employees and office work. Part of the first floor is also a small shop with warehouse and facilities for employees. The second floor is a residential unit and the second part of the administrative unit. Third to the fifth floor is only residential and there are 6 residential units. All floors are connected by staircase and a wheelchair lift. In front of the building is designed parking lot for 20 cars. One of the parking space is wheelchair accessible.

This diploma thesis deals with the processing of project documentation of student housing in the city of Olomouc. The building is located near the university dormitory accommodation of Palacky University. It is designed to complement the missing type of accommodation. Building is a L-shaped five-storey, without a basement and with a flat roof. Structural system is mostly brick, only part of first floor is solved by columns. The building is divided into three building complexes. Two wings for the accommodation have 4 floors. The connector block has five floors, where the 5th floor is only the engine room. Foundation structures are concrete strips and foundation pads. South side of the building is protected from the sun by sunscreens, on which in a future could be installed photovoltaics. The building is divided into three parts in terms of functionality. 1.NP consists of commercial premises in the southern block and private rooms for accommodated in the eastern block. 2nd-4th floor forms spaces designed to accommodate students. Accommodation capacity is 105 people.

The diploma thesis called ,,Sports center with restaurant in Holesov” is written in form of implementing project documentation and contains all requirements according to current laws. Proposed object is located on a plot 461/1 in Partyzanska street, Holesov. The object is separate building situated into north part of the plot. The designed building has two floors, no basement and is covered with flat roof. Foundations of the building are design as foundations strips with concrete slabs under column. Vertical carrier system, non-carrier constructions and separating constructions of the building contain ceramic clay block Porotherm. The carrier system is supported by reinforced concrete. Ceiling construction is made of ceiling panels Spiroll. The flat roof contains heat-insulation wedges and roof drains and overflows insurance for drainage. Main walls are covered with contact insulation system and the visual part of facade is made of facade blocks Cembrit Solid mounted to wooden grate which are attached to metal anchors. The object is divided into two main parts with shared entrance. First part is located in the ground floor and is designated for restaurant, bowling centre and back office including kitchen and bar. The other part of the building is designated for sports use. The ground floor contains two squash courts with facilities and first floor is divided into parts prepared for a gym and group lessons like spinning. This separate part has its own changing rooms and toilets with showers. The designed object is barrier-free. There is also a parking with 65 lots for vehicles. Four of them are designated for disabled visitors.

The subject of this diploma thesis is a newly built mixed-use building in Brno. It is a four-storey building without cellar. The building is located on a corner plot in an urban part of Brno - Židenice. In the 1st floor there are three business units. On the other floors are a total of 11 apartments. One apartment is located in the courtyard. It is designed for people with limited mobility. The vertical structures are of the ceramic blocks Porotherm. Ceiling structures and staircases are cast-in-place reinforced concrete. The building is insulated with contact insulation system ETICS. The roof is warm flat. The project was processed by computer software AutoCAD 15.

The diploma thesis solves a theater with a cafe in the town of Humpolec in the Vysočina Region. It contains complete documentation for execution, assessment in terms of fire safety and in terms of building physics. Furthermore, the proposal ventilation for cinema, foyer and cafe. There is a cinema and a cafe, which is located on the second floor. Cinema is designed with a capacity of 196 seats, of which 5 seats are reserved for people with limited mobility. Screening is provided as 2D mode and 3D projection. The café is designed for moviegoers and the general public. The café seats 36 seats. The building is designed as a two storey with dissected floor plan with rounded shapes with no sharp edges with a protruding portion of the roof of cinema, which is located on the north side of the building and has the function division of the building into individual units. The building has dimensions of 39.15 meters x 29.45 meters. The supporting structure of the building consists of reinforced concrete reinforced walls and ceilings. In the southern part of the building with rooms Foyer café is designed glass facade of the LOP. Supporting roof structure over the cinema hall is made up of wooden trusses joined punched punched plates.

The aim of this thesis is to design a mountain chalet. Chalet is intended for recreation and accommodation for 23 persons and is designed to gently sloping land in the village of Horní Bečva. The building has two floors without a basement. The main entrance to the building is from the southern side entrance for staff is on the eastern side and the other side entrance to the building is from the north. Part of the building for accommodation is situated on the 2nd floor. Perimeter and interior bearing walls are designed from brick blocks Porotherm in 2.NP then the inner walls of plasterboard. The construction of a roof over the main part of the building is made up of wooden roof purlin system, a roof over your wellness zone is flat vegetation, and the roof over the vestibule is flat with classical music. The main part of the building is covered with a gable roof with a slope of 35 degrees inclinations flat roof over the vestibule wellness zone and 3%.

This diploma thesis solves a project Sports and wellness center. This object is located on land number 1241/549, 1241/571in cadastral office Velké Bílovice. The plot is located on a street Podivínská in Velké Bílovice. Velké Bílovice are smaller town in South Moravia. The building has two floors ane one underground floor. The building is constructed of brick systém SUPERTHERM HELUZ. The perimeter wall is constructed from ceramic blocks HELUZ STI 49. Ceilings are monolithic reinforced concrete. The building offers three squash courts, a fitness center, snack bar, sauna with massage. The entire building is expected movement of persons with reduced mobility. The roof is flat and angled wooden beam. Entrance doors and window are Aluminium

The subject of this diploma thesis is the processing of design documentation for realization of the new-build multipurpose building in Opava. The building is designed on the grounds of a former dairy in the Krnovská street where the demolition of obsolete buildings passed off recently. Now are these areas designed to build up again. Designed object will function as a multipurpose building with the operation of a restaurant on the 1st floor, office spaces on the 2nd floor and dwelling units on the 3rd floor. Part of the first floor is a mass garage primarily intended for residents of dwelling units with a total of 9 parking places. It is designed eight dwelling units in total of which six are one-room flats and two are four-room flats. Plan shape of the building is rectangular. The londbearing structure of the building is a reinforced concrete prefabricated precast concrete frame founded on cast-in-place concreted pads. Infill walls are clay brick. The building is roofed with warm flat roof. Dominant features of the building are large glass areas in all floors, metal ventilated facade and loggias of dwelling units. The drawings are processed in AutoCAD programme.