This study develops a method to simulate a full-scale inertia friction weld with a sub-scale specimen and modifies a direct drive friction stir welder to perform the welding process. A torque meter is fabricated for the FSW machine to measure weld torque. Machine controls are modified to enable a force control during the IFW process. An equation is created to measure weld upset due to deflection of the FSW machine. Data obtained from a full-scale inertia friction weld are altered to account for the geometrical differences between the sub-scale and full-scale specimens. The IFW are simulated with the sub-scale specimen while controlling spindle RPM and matching weld power or weld RPM. The force used to perform friction welding is scaled to different values accounting for specimen size to determine the effects on output parameters including: HAZ, upset, RPM, torque, power and energy of the weld. Increasing force has positive effects to upset, torque, power and energy of the welds, while reducing the size of the HAZ.

This project explores the feasibility of the solid-state welding method direct-drive friction welding to be used as a joining method for the nitrogen alloyed steel Uddeholm Vanax SuperClean, produced via processes based on powder metallurgy. Vanax SuperClean cannot be welded using fusion welding methods where the base material melts, due to nitrogen escaping the material, resulting in inferior quality welds. The cost of the material motivates the use of Vanax SuperClean for critical parts in applications, combined with a less costly material for the remaining parts, causing alternative joining methods to be examined. Vanax SuperClean is friction welded to itself and to Uddeholm steel types Stavax ESR and UHB 11. Samples are prepared for a number of examinations. Microstructures of the samples are examined using microscopy, microhardness testing is carried out per the Vickers principle, retained austenite is measured using X-ray diffraction and tensile testing of the welded samples is performed. Defect-free welds are produced in all examined samples, showing that the method is suitable for Vanax SuperClean and that no preheating or slow cooling of workpieces are necessary. The possibility of using friction stir welding as a joining method for Vanax SuperClean is discussed. / Detta projekt undersöker möjligheten att använda trycksvetsningsmetoden friktionssvetsning som sammanfogningsmetod för det kvävelegerade pulvermetallurgiskt framställda stålet Uddeholm Vanax SuperClean. Vanax SuperClean kan inte svetsas med smältsvetsmetoder där grundmaterialet smälter, på grund av kvävgasbildning som resulterar i undermåliga svetsfogar. Kostnaden för materialet motiverar användandet av Vanax SuperClean för kritiska delar i applikationer, kombinerat med ett mindre kostsamt material till övriga delar, vilket föranleder undersökning av alternativa sammanfogningsmetoder. Vanax SuperClean friktionssvetsas mot sig själv, såväl som mot Uddeholmsstålen Stavax ESR och UHB 11. Prov tas fram för ett antal undersökningar. Mikrostruktur undersöks med mikroskopi, mikrohårdhetsprovning utförs enligt Vickersprincipen, restaustenitnivåer mäts med röntgendiffraktion och dragprovning utförs. Lyckade svetsfogar fås i alla undersökta prover, vilket visar att svetsmetoden är lämplig för Vanax SuperClean och att varken förvärmning eller långsamt svalnande av arbetsstycken krävs. Möjligheten att använda friktionsomrörningssvetsning som sammanfogningsmetod för Vanax SuperClean diskuteras.