Thesis (MSc (Forest and Wood Science))--University of Stellenbosch, 2011. / ENGLISH ABSTRACT: This study investigated the use of carbon isotopes as a potential measure for water availability and drought stress in Pinus radiata in the Western and Southern Cape, South Africa. An understanding of water availability and its variation in space is fundamental to the implementation of increasingly site-specific management regimes that have the potential to greatly improve productivity across sites in the region. Fifteen plantation compartments situated on water shedding sites were identified where good weather data existed and a water balance model could be run. In addition, late wood samples were analysed from four co-dominant trees in the same stand to determine the δ13C values of five tree rings, each representing a specific growth year before first thinning. Detailed water balances were constructed for each trial site and drought stress indicators (a) relative canopy conductance (after Granier et al., 2000) and (b) the ratio of actual to potential evapotranspiration (supply / demand ratio), were related to δ13C values in latewood. Maximum available soil water ranged from 52 to 313 mm across trial sites. The water balance model used adequately described soil water availability throughout each growing season and indicated that stand stress due to the lack of available soil water mainly occurred during the summer months of the study period (November to April). The supply / demand ratio for this period as well as the relative canopy conductance proved to be good measures of drought stress. The six-month supply demand ratio (calculated for the period November to April) ranged from 0.04 to nearly 1 (winter rainfall zone) and 0.35 to 1 (all-year rainfall zone) and were strongly related to δ13C values (p < 0.001; r2 = 0.7822). It appears that using δ13C values, it may be possible to classify sites into three water availability classes. This classification may assist in the implementation of intensive silvicultural operations on an increasingly site-specific basis. Where sites are enriched with water from lateral flow or upslope positions, δ13C may be the only reliable technique to quantify soil water availability. / AFRIKAANSE OPSOMMING: Hierdie studie ondersoek die gebruik van koolstof isotope as 'n moontlike maatstaf vir die beskikbaarheid van water en droogtestremming in Pinus radiata in die Wes-en Suid-Kaap, Suid-Afrika. 'n Begrip van die beskikbaarheid van water en die ruimtelike variasie daarvan is fundamenteel vir die implementering van groeiplek-spesifieke bestuur sisteem wat die potensiaal het om baie verbeterde produktiwiteit oor persele in die streek teweeg te bring. Vyftien plantasievakke, geleë op waterskeidingsterreine is geïdentifiseer waar goeie weer data bestaan en 'n water balans model uitgevoer kon word. Daarmee saam is laathout monsters vanuit vier ko-dominante bome in dieselfde kompartement geanaliseer en die δ13C waardes van laathout in vyf jaarringe bepaal wat elk 'n spesifieke jaar van groei voor die eerste dunning verteenwoordig. Gedetailleerde water balanse is vir elke proef perseel bereken en aanwysers van droogtestremming, nl.: (a) relatiewe kroon geleiding (na Granier et al., 2000) en (b) die verhouding van die werklike teenoor potensiële evapotranspirasie (vraag / aanbod verhouding) is gekorreleer met 13C waardes in laat hout. Die maksimum hoeveelheid water beskikbaar op die verskeie proefpersele wissel van 52 tot 313 mm. Die water balans model wat gebruik is beskryf die beskikbare grondwater met genoegsame akkuraatheid. vir die hele groeiseisoen. Die model dui ook aan dat die kompartemente droogtestremming as gevolg van die gebrek aan beskikbare grond water ervaar gedurende die somer maande van die studie tydperk (November tot April). Die vraag / aanbod verhouding vir hierdie tydperk, asook die relatiewe kroon geleiding is geskik om as maatstawwe van droogtestremming gebruik te word. Die vraag / aanbod verhouding (bereken vir die tydperk November tot April) het gewissel van 0,04 tot byna 1 (Winter reënval gebied) en 0,35 tot 1 (die heel jaar reënval sone) en is sterk verwant aan 13C waardes (p <0,001; r2 = 0,7822). Dit blyk dat met die gebruik van δ13C waardes, dit moontlik kan wees om kompartemente te klassifiseer in drie klasse van water beskikbaarheid. Hierdie klassifikasie kan help met die implementering van intensiewe boskultuur bedrywighede op 'n meer vak-spesifieke basis. Waar vakkeverryk is met water vanuit laterale vloei of hoër liggende posisies, mag δ13C dalk die enigste betroubare tegniek wees om die beskikbaarheid van water te kwantifiseer.

Thesis (MScFor)--Stellenbosch University, 2013. / ENGLISH ABSTRACT: South Africa is a timber scarce country that will most probably experience a shortage of structural timber in the near future. In this study the concept of using young finger‐jointed Eucalyptus grandis timber was evaluated for possible application in roof truss structures while the timber is still in the green, unseasoned state. 220 finger‐jointed boards of cross‐sectional dimension 48 x 73 mm and 36 x 111 mm timber, cut from 5‐18 year old Eucalyptus grandis trees were obtained from Limpopo province, South Africa. The boards were manufactured using a polyurethane (PU) adhesive at moisture content levels above fibre saturation point and no drying was performed. The objectives of this study were to determine various mechanical and physical properties of this finger‐jointed product. More specifically (1) to determine the strength and stiffness potential of the product in the wet and the dry condition, (2) to evaluate physical properties such as density, warp, checking and splitting, (3) to evaluate potential indicator properties to be used as structural grading parameters, and (4) to compare the flexural properties to the current SA pine resource and SANS structural grade requirements. The boards were divided into two groups of the same size, which constituted the wet and the dry samples. Each sample was further separated into six different groups for testing the different strength and stiffness properties. The dry group was stacked in a green‐house for nine weeks until equilibrium moisture content was reached. Afterwards selected physical properties such as warp, checking and splitting were assessed. Destructive testing was conducted on the boards and the results were used to determine various mechanical properties. Finally, each board was assessed for density and moisture content (MC) values. The study showed that the young finger‐jointed Eucalyptus grandis timber had very good flexural properties. Both mean modulus of elasticity (MOE) and modulus of rupture (MOR) 5th percentile strength values for wet and dry boards complied with the current SANS 10163‐1 (2003) requirements for grade S7.The values of tensile perpendicular to grain and compression perpendicular to grain strength did not conform to SANS requirements for grade S5. The other strength properties for the wet and dry groups complied with one of the three SANS structural grades. The 5 year old (48 x 73 mm) boards’ showed significantly higher levels of twist and checking compared to 11 year old boards of the same dimension. Only 46.3% of the finger‐jointed products conformed to the density requirements in SANS 1783‐2 (2004) for grade S7. There was a significant difference in density between the three age groups (5, 11 and 18 years) presented in this study. The variation in both MOE and MOR values of the fingerjointed product proved to be significantly lower in comparison to currently used SA pine sources. Based on the results from this study the concept of producing roof trusses from wet, unseasoned and finger‐jointed young Eucalyptus grandis timber has potential. However, additional research on a number of issues not covered in this study is still required for this product including full scale truss evaluations, proof grading, PU adhesive evaluation at elevated temperatures, nail plate load capacity, and the possible need for chemical treatment of the product against Lyctus beetles. / AFRIKAANSE OPSOMMING: Suid Afrika is ‘n land wat waarskynlik ‘n tekort aan strukturele hout sal ervaar in die nabye toekoms. In hierdie studie word die gebruik van jong gevingerlasde Eucalyptus grandis hout vir die moontlike gebruik in dakstrukture, terwyl nat en ongedroog, ondersoek. 220 gevingerlasde planke van deursnit 48 x 73 mm en 36 x 111 mm gesaag van 5‐18 jaar‐oue Eucalyptus grandis bome en afkomstig van die Limpopo provinsie in Suid Afrika, is gebruik. Die produk is vervaardig met poli‐uretaan (PU) lym uit planke met vog inhouds vlakke bo veselversadigingspunt. Die doelwit van hierdie studie was om verskeie meganiese en fisiese eienskappe van die vingerlas produk vas te stel. Meer spesifiek (1) om die sterkte en modulus van elastisiteit (MOE) potensiaal van die vingerlas produk in die nat en droë toestand te analiseer, (2) om die fisiese eienskappe soos digtheid, vervorming, oppervlakbarse en spleting te ondersoek, (3) om potensiële graderingsparameters te evalueer, en (4) om die buigeienskappe van die produk te vergelyk met SA dennehout asook die SANS strukturele graad vereistes. Die planke is verdeel in twee groepe, ‘n nat groep en ‘n droë groep. Elke groep is verder verdeel in ses kleiner groepe soos buig, trek en drukmonsters. Die droë groep was in ‘n kweekhuis geplaas vir nege weke totdat veselversadigingspunt bereik is. Daarna is geselekteerde fisiese eienskappe soos vervorming, oppervlak barse en spleting gemeet. Destruktiewe toetsing is uitgevoer op die planke en die resultate was gebruik om verskeie meganiese eienskappe vas te stel. Laastens is elke plank se digtheid en voggehalte gemeet. Die studie het getoon dat die jong gevingerlasde Eucalyptus grandis hout goeie buigeienskappe het. Beide die gemiddelde MOE en buig sterkte 5de persentiel waardes van die nat en droë groep het voldoen aan die huidige SANS 10163‐1 (2003) vereistes vir graad S7. Die sterkte‐eienskappe van loodregte trekkrag en loodregte druk het nie die vereistes vir SANS graad S5 gemaak nie. Die ander sterkte‐eienskappe van die nat en droë groep het voldoen aan een van die drie SANS strukturele graadvereistes. Die 5 jaar‐oue (48 x 73 mm ) planke het beduidend hoër vlakke van draai‐trek en oppervlakbarste getoon as die 11 jaar‐oue planke van dieselfe dimensie. Slegs 46.3% van die vingerlas produk het voldoen aan digtheidsvereistes vir SANS graad S7. Daar was ‘n beduidende verskil in dightheid tussen die drie ouderdomsgroepe (5, 11 en 18 jaar). Die MOE en buigsterkte‐waardes van die Biligom produk het beduidend laer variasie as huidige SA denne houtbronne getoon. Die resultate verkry in die studie toon dat die konsep om dakkappe te vervaardig van nat, gevingerlasde jong Eucalyptus grandis hout die potensiaal het om suksesvol toegepas te word. Bykomende navorsing oor ‘n aantal faktore wat nie in hierdie studie ingesluit is nie word steeds benodig. Dit sluit in ‘n volskaalse dakkap evaluasie, proefgradering, PU lym evaluasie by hoë temperature, spykerplaat ladingskapasiteit en die moontlike noodsaaklikheid van chemiese behandeling van die produk teen Lyctus kewers, insluit.

Thesis (MScFor)--Stellenbosch University, 2013. / ENGLISH ABSTRACT: Information on the external shape and internal properties of a tree such as the branch structure, tree ring widths and formation, and defects such as resin pockets is important for many forest –and wood science researchers as well as for the forest and wood processing industries. Resin pockets are internal defects associated with some softwood species, and are undesirable in some wood applications such as furniture and veneer. A tool that is often used in research to obtain this information is the Computed Tomography scanner. The high cost of the scanner, as well as the cost of transporting logs to the scanner, limits the application range of this equipment. An alternative, lower cost method would be beneficial for many researchers interested in tree shape and macroscopic internal tree characteristics. The objectives of this study were to: - Design, construct and test a mobile system that can be used in field to obtain a three‐dimensional model of a log or tree stem indicating selected macroscopic internal characteristics and, - Interpret results to explain the occurrence and causes of resin pockets in Pinus patula from the Mpumalanga escarpment, South Africa. A system for dissecting and measuring trees in field was designed, constructed and tested. The metal frame was used to cut a stationary, fixed log into discs and obtain digital images of crosssections along the stem axis. The frame was capable of processing logs with maximum dimensions of 3 m in length and 45 cm in diameter. Software was developed to convert the digital images into three‐dimensional models of logs and trees to demonstrate properties such as the external shape of the trees, branch structure and pith location. Properties such as ring width were measured from the images obtained. The study was conducted in the Mpumalanga escarpment to obtain three‐dimensional models of Pinus patula trees and to establish the reason for formation of resin pockets in these trees. Four 3 m logs from twenty‐four trees from three compartments were dissected and digitally reconstructed into three‐dimensional models. A total of 61 cross sections with resin pockets were identified from the 2750 cross cut images taken 20 cm apart along the longitudinal axis of the log. It was not possible to accept or reject conclusively any of the existing hypotheses for the cause of resin pocket formation. The formation of Type 2 resin pockets was most probably due to felling damage during thinning operations. It seems likely that wind damage and possibly insects might be responsible for the formation of Type 1 resin pockets. / AFRIKAANSE OPSOMMING: Kennis in verband met die interne eienskappe van ‘n boom soos takeienskappe, jaarringwydte en vorm, en harsholtes is belangrik vir sommige bos ‐en houtkundige navorsers. Die toerusting wat huidiglik algemeen gebruik word om inligting van hierdie aard te bekom is ‘n CT skandeerder. Die metode is egter duur as gevolg van hoë kapitale koste van die toerusting sowel as die vervoerkoste van stompe na die CT‐fasiliteit. ‘n Meer ekonomiese alternatief sal vir baie navorsers van waarde wees. Harsholtes in hout lei tot afgradering van hout en fineer. Die doel van die studie was twee‐sydig: - Om ‘n stelsel te ontwerp en bou wat ‘n drie‐dimensionele model van ‘n boom kan skep wat sommige makroskopiese, interne eienskappe weergee, en - Om die voorkoms en oorsaak van harsholtes in Pinus Patula van die Mpumalanga platorand te ondersoek. ‘n Raam is ontwerp en vervaardig wat in die plantasie gebruik word. Die raam kan stompe van tot drie meter lengte met ‘n maksimale diameter van 45 cm hanteer. Die raam is gebruik om snitte deur die stompe te maak, ‘n afstandmeting tot by die gesaagde oppervlak word deur ‘n lasermeter geneem en ‘n kamera neem ‘n foto. Sagteware word dan gebruik vir die uitkenning van sekere dele in elke beeld sowel as die samestelling van ‘n drie‐dimensionele model. Data‐insameling met die raam is in Mpumalanga gedoen. Die raam is in die tydperk getoets en het goed gefunksioneer. Vier stompe elk vanaf vier‐en‐twintig bome vanuit drie afsonderlike kompartemente is verwerk op die raam en volledige drie‐dimensionele modelle geskep vir hierdie bome insluitend hul eksterne vorm, takeienskappe en pitvorm (“pith location”). Ongeveer 2750 foto’s van dwarssnitte is tydens data‐insameling geneem. Net 61 van die foto’s het harsholtes bevat. Geen definitiewe oorsaak van harsholtes kon bepaal word nie. Tipe 2 harsholtes word waarskynlik as gevolg van skade tydens uitdunning van bome gevorm. Wind en insekte lyk na die mees waarskynlike oorsake van Tipe 1 harsholtes.

Thesis (MScFor)--Stellenbosch University, 2013. / ENGLISH ABSTRACT: The practice of combining row and selective thinning in commercial pine plantation silviculture carries the risk of unwanted irregularities in tree distribution within the stand. This situation is aggravated with poor tree selection during marking. The potential consequences of poor tree selection are gaps created along row removals, which are necessary for access to harvesting operations. These gaps lead to spatially asymmetric growing space among adjacent trees. The effect of irregular stand structures on tree morphology and growth are investigated in this study, and are based on two stands of Pinus patula, (Schiede ex Schlechtendal et Cham.) in Langeni plantation, South Africa. This study focuses on two aspects. Firstly, a comparison between trees grown in all-sided and one-sided spatial competition situations in order to assess if there are differences in growth and selected quality parameters. Secondly, the mitigation of irregular structures using a simulation based study on changing the planting geometry in order to investigate the effect on harvesting in terms of stand impact, simulated harvesting productivity and harvesting system costs. Results showed that trees grown in an irregular competitive status have significantly larger crown diameters, crown lengths, longer and thicker branches, disproportionately one sided crown growth and a reduction in space-use efficiency. Simulations indicated that changing planting geometry from the current 2.7m x 2.7m to 2.3m x 3.1m and 2.4m x 3m would result in up to a 20% reduction of machine trail length and fewer rows being removed for machine access. The simulation of harvesting thinnings showed that various planting geometry alternatives increased harvesting productivity by 10% to 20% and reduced overall thinning harvesting cost by up to 11%. This study successfully investigated the factors that potentially negatively affect saw timber quality and volume production of the stand at final felling. It also illustrated the applicability of simulation methods for testing harvesting scenarios and developing economically viable alternatives. / AFRIKAANSE OPSOMMING: Die praktiese kombinasie van ryuitdunning en seleksiedunning in kommersiële denneplantasies dra die risiko van ongewensde onreelmatighede in die verspreiding van bome in die opstand. Hierdie situasie word vererger deur swak boomseleksie tydens die merk van dunnings. Die potensiële gevolge van swak boomseleksie is die ontstaan van onreelmatige gapings tussen boomkrone, veral langs die rydunnings, wat nodig is vir toegang tydens die ontginning van die hout. Dit lei daartoe dat die bome langs die dunningsrye asimmetriese ruimtes het om in te groei. Die effek van onreelmatige opstandstrukture op boom-morfologie en -groei word in hierdie studie ondersoek in twee Pinus patula, (Schiede ex Schlechtendal et Cham.) vakke te Langeni plantasie, Suid-afrika. In die studie word daar gefokus op twee aspekte. Eerstens word bome wat onder toestande van eweredige ruimetlike kompetisie groei vergelyk met die wat onder toestande van eensydige ruimtelike kompetisie groei om sodoende vas te stel of daar verskille is in die groeipatroon aan die hand van geselekteerde gehalteparameters. Tweedens word daar gefokus op die verbetering van onreelmatige opstandstrukture deur gebruik te maak van ’n simulasie-gebasseerde studie om veranderinge in die aanplantingsgeometrie te ondersoek met die doel om die effek van plantspasieering op ontginningsimpakte, gesimuleerde ontginningsproduktiwiteit en -sisteem koste te bepaal. Die resultate het getoon dat bome wat onder toestande van onreelmatige spasieering en kompetisie groei krone met groter deursnee asook langer lengtes ontwikkel, langer en dikker takke het, disproporsionele, eensydige kroongroei en ’n reduksie in ruimte-gebruik toon, wat die groeidoeltreffendheid nadelig beinvloed. Simulasies met betrekking tot die verandering in boomaanplantgeometrie vanaf die huidige 2.7m x 2.7m na 2.3m x 3.1m en 2.4m x 3m het gedui op ’n reduksie van 20% in die masjienpadafstand en na minder rye wat uitgehaal moes word om die toegang van masjiene moontlik te maak. Die simulasie van die ontginning van dunnings het getoon dat verskillende aanplantgeometriealternatiewe die ontginningsproduktiwiteit met 10% tot 20% verbeter het, en die algehele dunningsoeskoste met tot 11% verminder het. In hierdie studie is die faktore, wat die gehalte van saaghoutkwaliteit en volume tydens die finale oes van die plantasie potensieel negatief mag beinvloed, suksesvol ondersoek. Dit illustreer ook die geskiktheid van simulasietoepassings vir die toets van ontginningsalternatiewe en die ontwikkelling van meer ekonomies voordelige praktyke .

Thesis (MScFor)--Stellenbosch University, 2014. / ENGLISH ABSTRACT: The role that forestry plays in climate change mitigation is well recognized by countries that ratified the Kyoto protocol agreement. Though climate change mitigation strategies provide a strong incentive to quantify current patterns of forest carbon sources and sinks, this exercise (carbon accounting) is not as simple as it sounds. This is proven by the vast number of techniques and methodologies available, from models to softwares programmes created in response to the need to estimate carbon sequestration. The study aimed at gaining an understanding of the current carbon sequestration estimation methodology and models in use by the South African Forestry Industry. A survey was undertaken amongst forestry industry stakeholders in which 77% of respondents agreed to the need for a carbon sequestration model for South Africa. This model should have qualities that the forestry industry and all stakeholders agreed with. . A search of freely available models and software was conducted. The aim was to find freely available model(s) that would be readily applicable and adoptable to South African conditions. A Multi Criteria Analysis was carried out using “ideal qualities” for a carbon model as weighting. This resulted in the selection of two models, CASMOFOR and CBM CFS 3, which obtained the highest sum product total from the analysis. These together with FICAT, which came as a recommendation from the questionnaire survey, were compared in the analysis. Carbon values were calculated from yield table volumes by Kotze et al. (2012). A conversion of these volumes to biomass and carbon was done using Dovey (2009) biomass expansion factors and a biomass to carbon conversion value of 0.5 g C/g dry matter, following procedures by Matthews (1993). The first comparison was made on how the model results related to the yield table estimates from Kotze et al. (2012). When carbon values were compared per hectare, it was found that the FICAT model differed significantly from the rest. A second comparison looked at the models’ prediction of the carbon accumulated in NCT’s Enon plantation outside Pietermaritzburg. The Hungarian model, CASMOFOR, was the better predictor as it produced the lowest Mean Squared Error (MSE). Based on the results from the survey and model analysis a number of recommendations can be made regarding the current carbon accounting situation in South Africa. One of the main recommendations is that information sharing among the industry’s stakeholders should improve if the industry is to reach consensus on which methodology to adopt in their business practices. / AFRIKAANSE OPSOMMING: Die rol wat bosbou speel in klimaatsverandering-bekamping is welbekend onder lande wat die Kyoto protokol ooreenkoms onderteken het. Alhoewel klimaatsverandering-bekamping strategieë ‘n sterk aansporing bied om huidige patrone van woudkoolstof bronne en sinkte te kwantifiseer, is hierdie oefening nie so maklik soos dit klink nie. Die bewys hiervan is die groot aantal tegnieke en metodes, wat wissel van modelle tot sagteware programme wat ontwikkel is om koolstofsekwistrasie te meet. Die doelwit van die studie was om die huidige koolstofsekwistrasie metodes en modelle wat deur die Suid Afrikaanse Bosbou Bedryf gebruik word, beter te verstaan. ‘n Vraelysopname is onderneem onder bosbou-industrie deelnemers, waarin 77% van respondente saamgestem het dat dit nodig is dat Suid Afrika ‘n koolstofsekwistrasie model moet hê. Die model moet eienskappe hê waarmee die bosbou-industrie en alle deelnemers saamstem. ‘n Soektog na vrylik beskikbare koolstofmodelle en sagteware programme is onderneem. Die doelwit was om modelle te vind wat geredelik aangepas kan word vir Suid Afrikaanse toestande. ‘n Multi-kriteria analise is uitgevoer met die “ideale eienskappe”vir ‘n koolstofmodel as gewigte. Die resultaat was die seleksie van twee modelle, CASMOFOR en CBM CFS 3, wat die hoogste telling in die ontleding behaal het. Hierdie modelle, tesame met FICAT, wat aanbeveel is deur respondente van die vraelys opname, is vergelyk in ‘n ontleding. Koolstofwaardes is bereken vanaf opbrengstabelle wat deur Kotze et al. (2012) ontwikkel is. Die omsetting van hierdie volumes na biomassa en koolstof is gedoen deur Dovey (2009) se biomassa uitbreidingsfaktore en ‘n biomassa na koolstof omsettings faktor van 0.5 g C/g droëmassa te gebruik (Matthews, 1993). In die eerste vergelyking van die modelle is gekyk hoe die modelle vergelyk met koolstof berekeninge vanaf die Kotze et al. (2012) opbrengstabelle. Wanneer koolstofwaardes per hektaar vergelyk word is gevind dat FICAT beduidend verskil van die ander modelle. In ‘n tweede vergelyking is gekyk na hoe die modelle die koolstof wat in NCT se Enon plantasie buite Pietermaritzburg versamel is, voorspel. Die Hongaarse CASMOFOR model was die beste voorspeller. Anders as die FICAT en CBM CFS 3 modelle het dit die laagste Gemiddelde Vierkante Fout gehad. Na gelang van die resultate van die vraelysopname en die modelontleding kan ‘n aantal aanbevelings gemaak word oor die huidige koolstofberekening situasie in Suid Afrika. Een van die hoof aanbevelings is dat die uitruil van inligting tussen industrie deelnemers moet verbeter as die bedryf eenstemmigheid oor die metode van koolstofberekening wil bereik.

Thesis (MScFor)--Stellenbosch University, 2014. / ENGLISH ABSTRACT: Several studies have shown that stands of invasive alien plants in the natural forest environment can facilitate the rehabilitation and recovery of such forests and challenged the general and global perception that such invasive species threaten the biodiversity and functioning of natural vegetation systems. The aim of this study was to develop an understanding of the dynamics of the spread and establishment of natural forest species in a large stand of the invasive alien plant species Acacia mearnsii (Black wattle) along the Buffeljagsrivier, Western Cape, South Africa. Several patches of Moist forest, Dry forest and Riparian forest occur along the Buffeljagsrivier, above the Buffeljagsrivier dam. The stand of Black wattle consists of 90 ha for a distance of 3.12 km. The main objective was pursued through four specific objectives: (i) to map and assess the patterns in the distribution, size and species composition of the natural forest clusters within the Black wattle stand; (ii) to determine the relationship between natural forest clusters establishing within the Black wattle stand and the neighboring natural forest patches as potential seed sources for the developing forest clusters; (iii) to determine the subsequent spread of natural forest species from the developing forest clusters into the rest of the Black wattle stand; and (iv) to synthesize the information on the dynamics of the spread and establishment of natural forest species into the Black wattle stand as a basis for developing general guidelines for the conversion of invasive alien plant stands in the forest environment towards regrowing natural forest. In total, 329 clusters of natural forest species were GPS recorded and mapped (Arc-GIS) in three zones (Proximal, Intermediate and Distant in relation to the forest patches) within the Black wattle stand: 266 small clusters (one to three reproductively mature trees), 36 medium sized clusters (four to nine trees) and 27 large clusters (more than 10 trees). Large clusters were abundant in the zone close to the natural forest patches and the number of small clusters increased with increasing distance from the forest patches. A total of 28 species of 20 families were recorded. Natural forest species are therefore able to establish within a Black wattle stand. The relationship between natural forest clusters establishing within the Black wattle stand and the natural forest patches as potential seed sources was studied by sampling the stand composition along transects through the stands. A total of 55 rectangular plots (20 m x 10 m, 200 m2) were sampled across forest patches and forest clusters. Hierarchical clustering analysis, using number of stems of a species per plot, identified three main groups and 10 sub-groups. All the sampled forest clusters were included in four of the five Riparian forest sub-groups. Most Moist and Dry forest species were absent from the forest clusters. The three main forest types differed in their general characteristics and site conditions, and this was supported by the ordination analyses: aspect, slope and canopy closure. The developing forest clusters within the Black wattle stand related more to the Riparian forest in terms of similar very gentle south-westerly slope and mean stem diameter. This suggested Riparian forest to be the primary seed source of the establishing forest clusters within the Black wattle stand. However, the large-sized stems of common species were not significantly different between Riparian forest patches and forest clusters, suggesting that large-sized stems in the forest clusters could be part of remnant forest patches, which could act as local seed sources. Detailed evaluation of species importance values and stem diameter distributions showed that some important Moist and Dry forest species are present in the forest clusters. The conclusion was that every type of forest patch contributes to a greater or lesser degree to the development of forest clusters within the Black wattle stand. Seven large clusters were selected to sample the regeneration of natural forest species within 18 m from the forest cluster boundary. Two species lists were generated; one of species from adjacent natural forest patches, and another from 59 forest clusters of all sizes sampled throughout the wattle stand. The results indicated that (1) Mature trees of well-established forest clusters were the main seed sources for the cluster expansion in all directions; (2) Three different patterns were observed in terms of the distance of expansion of regeneration from the clusters: a decrease in regeneration with increasing distance from the cluster margin; increasing regeneration with increasing distance from the cluster; and no distinct pattern with a lack of regeneration of the dominant species of a forest cluster. The 40 species recorded within the Buffeljagsrivier site include a wide range of fruit and seed characteristics. Four main groups of woody species were identified, based on their presence/absence in forest patches and forest clusters. The presence/absence of most species can be explained in terms of their fruit/seed characteristics and dispersal mechanisms. The majority of recorded woody species were most likely dispersed by birds and mammal, particularly Rameron pigeons and baboons. In conclusion, a conceptual framework was developed to guide the rehabilitation of stands of light demanding invasive stands in the forest environment. Several topics for further research were identified. / AFRIKAANSE OPSOMMING: Verskeie studies het gewys dat opstande van uitheemse indringerplante in die woudomgewing kan die rehabilitasie en herstel van sulke woude fasiliteer, en daag die algemene en globale persepsie uit dat sulke indringerplantspecies die biodiversiteit en funksionering van natuurlike plantegroeisisteme bedreig. Die doel van hierdie studie was om ‘n beter begrip te ontwikkel van die dinamika vir die verspreiding en vestiging van inheemse woudspesies binne ‘n omvangryke opstand van die uitheemse indringerplant, Acacia mearnsii (swartwattel), langs die Buffeljagsrivier, Wes-Kaap, Suid Afrika. Verskeie kolle (‘patches’) van Vogtige, Droë- en Oewerwoud kom langs die Buffeljagsrivier voor. Die swartwattel opstand van ongeveer 90 ha groei langs die Buffeljagsrivier oor ‘n afstand van 3.12 km, tussen die dam en die woudkolle aan die stroom-op kant van die swartwattelopstand. Die hoofdoel is nagevolg deur vier spesifieke doelwitte: (i) om die groepies (‘clusters’) vestigende inheemse houtagtige plantsoorte binne die swartwattelbos te karteer en die patrone in hul verspreiding, grootte en spesies samestelling binne die swartwattelopstand te evalueer; (ii) om die verwantskap tussen natuurlike woudgroepies wat binne die swartwattelopstand vestig en die aangrensende woudkolle as potensiële saadbronne vir die ontwikkelende woudgroepies te bepaal; (iii) om die daaropvolgende verspreiding van inheemse woudspesies vanaf die ontwikkelende woudgroepies binne die res van die swartwattelopstand te bepaal; en (iv) om die inligting oor die dinamika van die verspreiding en vestiging van die woudspesies binne-in die swartwattelopstand saam te vat as ‘n basis vir die ontwikkeling van algemene riglyne vir die omskepping van uitheemse indringerplantopstande in die woudomgewing na hergroeiende inheemse woud. In totaal is 329 groepies van inheemse woudspesies aangeteken (via GPS) en gekarteer (Arc-GIS) in drie sones (nabygeleë, intermediêre en afgeleë) binne die swartwattel opstand: 266 klein groepies (een tot drie voortplantingsvolwasse bome), 36 medium-grootte groepies (vier tot nege bome) en 27 groot groepies (10 of meer bome). Groot groepies was volop in die sone naby aan die woudkolle en die aantal klein groepies het toegeneem met toenemende afstand vanaf die woudkolle. ‘n Totaal van 28 species van 20 families is aangeteken, en spesies soos Canthium inerme, Celtis africana, Gymnosporia buxifolia, Rapanea melanophloeos en Vepris lanceolata was algemeen binne die swartwattelopstand. Dit is daarom moontlik vir inheemse woudspesies om binne die swartwattelopstand te vestig. Die verhouding tussen inheemse woudgroepies wat binne die swartwattelopstand vestig en die woudkolle as potensiële saadbronne is bestudeer deur die opstandsamestelling langs transekte deur die opstande te bemonster. ‘n Totaal van 55 reghoekige persele (20 x 10 m, 200 m2) is opgemeet: nege in Droeëwoudkolle, 17 in Vogtige woudkolle, 20 in Oewerwoudkolle, en nege in die woudgroepies binne the swartwattelopstand. Hiërargiese Groeperingsanalise, gebaseer op aantal stamme van ‘n spesies per plot, het drie hoofgroepe en 10 sub-groepe ge-identifiseer: Vogtige woud met drie sub-groepe, Oewerwoud met vyf sub-groepe, en Droeëwoud met twee sub-groepe. Al die gemete woudgroepies is in vier van die Oewerwoud sub-groepe ingesluit. Die meeste Vogtige en Droeëwoud spesies was afwesig van die woudgroepies. Die hoof woudtipes (Droog, Vogtig, Oewer) verskil in hul algemene eienskappe en groeiplektoestande, en dis ondersteun deur die ordinasie-analises: aspek, helling en kroonsluiting. Die ontwikkelende woudgroepies binne die swartwattelopstand was nouer verbonde met Oewerwoud in terme van soortglyke baie geleidelike suid-westelike helling en gemiddelde stamdeursneë. Dit veronderstel dat Oewerwoud is die primêre saadbron van die vestigende woudgroepies binne die swartwattelopstand. Baie inheemse woudspesies kom egter oor die verskillende groepe en sub-groepe voor, met goeie verjonging oor die gemeenskappe. Die stamdeursneë van goter stamme van algemene spesies was niebeduidend verskillend tussen die Oewerwoudkolle en die woudgroepies, en dit veronderstel dat die groter stamme in die woudgroepies kan deel wees van oorblywende woudkolle, wat as plaaslike saadbronne kan dien. Gedetaileerde ontleding van spesies belangrikheidswaardes en stamdeursneëklasverdelings het getoon dat sommige belangrike Vogtige en Droeëwoud spesies is wel teenwoordig in die woudgroepies. Die gevolgtrekking was dat elke tipe woudkol in a mindere of meerdere mate bydra tot die ontwikkeling van die woudgroepies binne die swartwattelopstand. Sewe groot woudgroepies is geselekteer om die woudverjonging binne 18 m vanaf die woudgroepierand te bemonster. Twee spesieslyste is saamgestel; een van spesies van die aangrensende woudkolle, en een van spesies van 59 woudgroepies van alle groottes wat deur die hele swartwattelopstand aangeteken is. Die resultate het aangetoon dat (1) volwasse bome van goed-gevestigde woudgroepies was die hoof saadbronne vir die uitbreiding van die woudgroepies in all rigtings; (2) drie verskillende patrone is waargeneem in terme van die afstand van uitbreiding van verjonging weg vanaf die woudgroepies: ‘n afname in verjonging met toenemende afstand vanaf die groepierand; toenemende verjonging met toenemende afstand vanaf die woudgroepie; en geen beduidende patroon met ‘n gebrek aan verjonging van die dominante spesies van die woudgroepie. Die 40 spesies wat binne die Buffeljagsrivierstudiegebied aangeteken is het ‘n wye reeks vrug- en saadeienskappe ingesluit. Vier hoofgroepe van houtagtige spesies is geïdentifiseer, gebaseer op hul aan- of afwesigheid in die woudgroepies and woudkolle: spesies algemeen in die woudkolle en teenwoordig in die woudgroepies; spesies spesifiek to bepaalde woudkolle en teenwoordig in die woudgroepies; spesies teenwoordig in die woudkolle maar afwesig van die woudgroepies; en spesies afwesig van die woudkolle maar teenwoordig in die woudgroepies. Die aan- of afwesigheid van die meeste spesies kan verduidelik word in terme van hul vrug/saadeienskappe en verspreidingsmeganismes. Die meerderheid van aangetekende houtagtige spesies was meeswaarskynlik deur voëls en soogdiere versprei, veral Geelbekbosduiwe en Bobbejane. Ten slotte, ‘n konsepsuele raamwerk is ontwikkel om die rehabilitasie van opstande van ligafhanklike indringerspesies in die woudomgewing te rig. Verskeie onderwerpe vir verdere navorsing is geïdentifiseer. / RESUME: Plusieurs études ont montré que les peuplements de plantes exotiques envahissantes dans le milieu de forêt naturelle peuvent favoriser la réhabilitation de ces forêts contestant par-là, la perception générale et globale que ces espèces envahissantes menacent la biodiversité et le fonctionnement des systèmes de végétation naturelle. L’objective de cet étude était de mieux comprendre le dynamisme d’établissement et de propagation dans une forêt naturelle des espèces forestières au sein d’un large peuplement de l'espèce de plantes exotiques envahissantes Acacia mearnsii (acacia noir) le long de Buffeljagsrivier, Western Cape, en Afrique du Sud afin d’élaborer des axes directives de réhabilitation relative aux recouvrements d’espèces invasive. La forêt de Buffeljagsrivier s’étale sur un gradient de petites parcelles de forêt allant de forêt sèche, humide et marécageux. Au milieu de ces parcelles de Buffeljagsrivier, on circonscrit un peuplement d’acacia noir estimé à 90 ha sur une distance de 3,12 km. L’objective principal s’est poursuit à travers quatre sous objectives à savoir: (i) cartographier et évaluer les formes d’ invasions dans la distribution, la taille et la composition des recouvrements des espèces de forêt naturelle à l’intérieur du recouvrement d’acacia noir servant comme preuve possible de l’existence et établissement des espèces de forêt naturelle sous un recouvrement d'une espèces invasive; (ii) de déterminer la relation entre les recouvrements de forêt naturelle s’établissant á l’intérieur du peuplement d’acacia noir et ceux de la forêt naturelle avoisinante humide, sèche et marécageuse pouvant être considéré comme sources potentiel de semences conduisant au développement des premiers recouvrement cités; (iii) de déterminer l’étalement subséquent des espèces de la forêt naturelle à partir des recouvrements d’ acacia noir se développant à l’intérieur du reste du peuplement de l’Acacia noir; (iv) Synthétiser les informations sur la dynamique de la propagation et l'établissement d'espèces forestières naturelles dans l’acacia noir comme une base pour l'élaboration des lignes directrices générales pour la conversion de peuplements de plantes exotiques envahissantes se trouvant dans l'environnement de la forêt vers des repousses des forêts naturelles. Au total, 329 recouvrements d'espèces forestières naturelles ont été GPS enregistrées et cartographiées (Arc -GIS) dans trois zones (Proximale, Intermédiaire et Eloignée par rapport aux parcelles de forêt avoisinantes) dans le peuplement de l'acacia noir: 266 petits recouvrements avaient un à trois arbres matures, 36 recouvrements de taille moyenne avaient quatre à neuf arbres matures et 27 larges recouvrements avaient plus de 10 arbres matures. La visualisation de la carte a révélé que les larges recouvrements de forêt mature étaient abondant dans la zone proche des parcelles de forêt naturelle avoisinantes et que de petits recouvrements de jeunes arbres de forêt naturelles croissaient en nombre à mesure que la distance depuis les parcelles de forêts naturelles adjacentes s’élargissait. Un total de 28 espèces appartenant à 20 familles a été répertorié. Deux familles, Rubiaceae suivit de Anacardiaceae ont dominé l’echantillon. Les espèces forestières naturelles sont donc en mesure de s’établir dans un peuplement d'acacia noir. L’échantillon qui a servi à l’évaluation des sources de semences pour le développement des recouvrements de forêt naturelle à travers l’investigation de la relation entre les recouvrements de forêt naturels qui s’établissent à l’intérieur du peuplement d’acacia noir et les parcelles de forêt avoisinantes humide, sèche et marécageuse était constitué de 55 placettes rectangulaires de 200m2 le long de layons à travers le site d’étude. Une analyse hiérarchique des recouvrements réalisée sur la composition des espèces de l’échantillon a révèle que la forêt marécageuse concentre les espèces les plus fréquentes des recouvrements de forêts, et que la majorité des espèces présentes sur les parcelles des forêts sèches et humides étaient absente dans l’ensemble des recouvrements des forêts de l’acaci noir. Les trois principaux types de forêts différaient dans leurs caractéristiques générales et les conditions du site, et cela a été appuyé par l’analyse d’ordinants à partir de trois facteurs environnementaux, la pente, l’angle d’inclinaison par rapport au soleil, et la fermeture de la canopée. Les recouvrements de foret en développement au sein de l'acacia noir se sont trouvés davantage liés à la forêt marécageuse en termes de pente plate orientée sud-ouest et en diamètre moyen des arbres. Ces résultats ont désigné la forêt marécageuse comme la première source potentielle de semences permettant l’établissement des recouvrements de forêt à l’intérieur des peuplements d’acacia noir. Cependant, les souches d’arbres de grande taille des espèces communes entre les parcelles de forêts marécageuses et les recouvrements de forêt dans l’acaci noir n'étaient pas significativement différents, suggérant ainsi que ces arbres de grande taille trouves dans les recouvrements de foret pourraient faire parties des parcelles de forêt subsistantes de la dernière turbulence. Elles pourraient constituer des sources locales de semences. Par ailleurs, une évaluation détaillée des valeurs d'importance des espèces et des distributions des diamètres des souches d’arbres a montré que certaines espèces importantes de forêts humides et sèches sont présentes dans les recouvrements de foret. Finalement l’on conclue que chaque type de parcelles de forêt contribue plus ou moins à l’établissement des recouvrements de forêt dans le peuplement de l'acacia noir. Sept grands recouvrements de foret ont été sélectionnés pour étudier la régénération des espèces forestières naturelles sur un rayon de 18 m depuis la limite du recouvrement de foret. Deux listes d'espèces ont été générées, l'une des espèces de parcelles de forêt naturelle adjacentes, et une autre venant des 59 recouvrements de foret, toutes tailles confondues le long de l'acacia noir. Les résultats ont indiqué que (1) Les recouvrements de forêts, lorsque bien matures et bien établies devenaient les principales sources de semences pour leur expansion sur toutes les directions; (2) Trois allures différentes ont été observées en fonction de la distance de l'expansion de la régénération autour des recouvrements: une diminution de la régénération avec l'augmentation de la distance; une croissance de la régénération avec une distance croissante depuis les revcouvrements de foret, et pas d’allure particulaire voire une absence de régénération de certaines especes pourtant dominant dans les recouvrements de foret. Les 40 espèces recensées sur le site deBuffeljagsrivier comprennent un large éventail de caractéristiques de fruits et de graines. Quatre principaux groupes d'espèces ligneuses ont été identifiées, en fonction de leur présence / absence dans des parcelles de forêt et les recouvrements de forêt. De façon générale, la présence / absence de la plupart des espèces a pu être expliquée en termes de caractéristiques de leur fruits/graines et les mécanismes de dispersion. La majorité des espèces ligneuses enregistrées sont susceptibles d’être dispersées par les oiseaux et les mammifères, en particulier les pigeons rameron et les babouins vues sur le terrain. En conclusion, un cadre conceptuel a été élaboré pour guider la réhabilitation de peuplements envahissants de lumière en milieu forestier. Plusieurs sujets pour des recherches plus poussées ont été identifiés.

Thesis (PhD (Dept. of Forest and Wood Science))--University of Stellenbosch, 2009. / ENGLISH ABSTRACT: This study aimed to analyze under which conditions the structure, organization and integration of knowledge systems can provide the implementation of adaptive collaborative management of natural resources under conditions of high biodiversity in the humid forest zone of southern Cameroon. The study specifically did the following: characterized sustainable slash-and-burn agriculture innovations; examined the influences of local perceptions of nature and forest knowledge management systems on adaptive slash-and-burn agriculture practices; analyzed the influences of the social representation of land use patterns and their local indicators on agro-ecological sustainability; characterised the biophysical dimensions of local management of agricultural biodiversity knowledge systems; analyzed how local agricultural biodiversity knowledge is used to adapt and to satisfy household consumption needs, market preferences, and sustainable livelihoods; examined the influences of local perceptions of climate variability for the ability and adaptive capacity of people to use local knowledge to deal with the effect of pests-diseases on crop yield, corrective management actions, and adaptive slash-and-burn agriculture management. The study was conducted in three blocks within the humid forest zone of southern Cameroon along a gradient of natural resource use management intensification and population density. Data were collected via structured and semi-structured interviews, multi-disciplinary landscape assessment and a review of secondary information. Chisquare tests were used to show how local knowledge influences - natural resource management at the forest-agriculture interface, while binary logistic regressions were used to understand the influences of biophysical and socio-economic factors on farmers’ decisions to domesticate tree species and to cultivate several crop cultivars. Fourteen research and development (R&D) themes were identified and found to be equally distributed among blocks but unequally distributed across technical, marketing and socio-organisational types of innovation. There was a gap between social demand and innovation offer. Innovations offered covered more technical issues, such as crop variety development, indicating their agricultural focus rather than the integration of forest and agriculture issues. The local perceptions of nature and forest resources are based on social representation of the vital space into components having a specific function for the social, physical and spiritual life of people. Needs of the human world determine the role of local forest knowledge systems in the interpretation and responses of the natural environment, and guide the trajectories of natural resource management practices. The management of agro-ecological sustainability is based on the local definition of well-being, social representation of space and on a multi-criteria approach combining bio-indicators such as plants, earthworm activities, age of vegetation or forest cover, soil colour and quality but it is also positively influenced by land use history, the use value of wild plant and crop species, the knowledge of crop qualities, the knowledge of interactions between crops, and between crops and other wild plant species, the tree size of tree species used, the future use of a current land use, the estimated land use for own use and market access. / AFRIKAANSE OPSOMMING: Die doel van hierdie studie was om te bepaal onder watter omstandighede die struktuur, organisasie en integrasie van kennissisteme kan bydra tot die implementering van aanpasbare deelnemende bestuur van natuurlike hulpbronne onder toestande van hoë biodiversiteit in die vogtige woudsone van suidelike Kameroen. Die studie het spesifiek die volgende gedoen: volhoubare kap-en-brand landboukundige ontwikkelinge gekarakteriseer; die invloede van plaaslike persepsies van die natuur en woudkennisgebaseerde bestuursisteme op aanpasbare kap-en-brand landboupraktyke ge-evalueer; die invloede van die sosiale verteenwoordiging van grondgebruikspatrone en hul plaaslike indikatore op agro-ekologiese volhoubaarheid ontleed; die biofisiese dimensies van die plaaslike bestuur van landboukundige biodiversiteitskennissisteme gekarakteriseer; geanaliseer hoe die plaaslike landboukundige biodiversiteitskennis gebruik word om aan te pas by en bevrediging te verkry vir huishoudelike gebruiksbehoeftes, marksvoorkeure en volhoubare bestaansbehoeftes; die invloede en gebruik van plaaslike kennis en persepsies van klimaatsvariasie beoordeel in die vermoë en aanpassingskapasiteit van mense om die effekte van siektes-peste op gewasproduksie, regstellende aksies en aanpasbare kap-enbrand landboubestuur te hanteer. Die studie is uitgevoer in drie blokke binne die vogtige woudsone van suidelike Kameroen langs ‘n gradient van natuurlike hulpbrongebruiksbestuursintensiteit en populasiedigtheid. Data is versamel deur gestruktureerde en semi-gestruktureerde onderhoude, multi-dissiplinere landskapsevaluering en ‘n oorsig van sekondere inligting. Chi-kwadraat toetse is gebruik om te wys hoe plaaslike kennis die bestuur van die woudlandbou konneksie beinvloed asook binêre logistiese regressies om die invloede te verstaan van biofisiese en sosio-ekonomiese faktore op die boere se besluite om boomsoorte te domestikeer en om verskeie gewaskultivars te kweek. Veertien temas in navorsing en ontwikkeling (N&O) was gelyk versprei tussen die blokke en ongelyk versprei tussen tegniese, bemarking en sosio-organisatoriese tipes innovering. Daar was ‘n gaping tussen sosiale aanvraag en innoveringsaanbieding. Innoverings het meer tegniese aspekte gedek, soos ontwikkeling van ‘n verskeidenheid gewasse, wat wys op ‘n landboukundige fokus eerder as ‘n integrasie van woud en landboukundige aspekte. Die plaaslike persepsies van die natuur en woudhulpbronne was gebaseer op sosiale verteenwoordiging van lewensbelangrike ruimte in komponente met ‘n spesifieke funksie vir die sosiale, fisiese en geestelike lewe van die mense. Behoeftes van die menslike wereld bepaal die rol van plaaslike woudkennissisteme in die interpretasie van en reaksie op die natuurlike omgewing, en rig die gebruik van hulpbronbestuurspraktyke. Die bestuur van agro-ekologiese volhoubaarheid is gebaseer op die plaaslike definisie van geluk, sosiale verteenwoordiging van ruimte en op ‘n multikriteria benadering wat bio-indikatore kombineer soos plante, erdwurmaktiwiteite, ouderdom van plantegroei- of woudbedekking, grondkleur- en kwaliteit, maar is ook positief beinvloed deur grondgebruiksgeskiedenis, die gebruikswaarde van natuurlike en gewassoorte, die kennis van gewaskwaliteite, die kennis van die interaksie tussen gewasse en tussen gewasse en natuurlike plantsoorte, die boomgrootte van boomsoorte wat gebruik word, die toekomstige gebruik van ‘n huidige grondgebruik, die beraamde grondgebruik vir eie gebruik en vir toegang tot die markte.

Dissertation (PhD (For))--University of Stellenbosch, 2001. / ENGLISH ABSTRACT: The objective of this study is to develop a new method which can be used to forecast the Forest Engineering value chain. The method is then applied in the South African context in order to validate the use thereof. Finally, the South African results are used to propose strategies, which the industry should pursue in the future. To forecast the future an understanding of the past is required. To this end, the historical development of Forest Engineering is discussed, both globally and in South Africa. The current status quo in Forest Engineering in South Africa was determined through a national survey of plantations larger than 200 ha. The results are reflected in Chapter 2. Because of the importance of globalisation and technology, Chapter 3 gives a literature review of relevance of technology in today's business world, including various forecasting techniques that are relevant to the study. These techniques are a combination of traditional forecasting methods, technology forecasting methods and strategic planning methods. Various approaches to financial analysis have also been discussed, in order to determine the soundest method of comparing various forest engineering systems with each other. This includes an overview of traditional machine cost calculations. The core of the study lies in the combination of these methodologies into a useful method, which is particularly suited to forecasting the Forest Engineering value chain. Such a method is developed in Chapter 4, based on the literature review of forecasting methodologies. The method is then validated in Chapter 5, through the application thereof in the South African forestry industry. Global trends are established with the use of a Delphi study. This technique uses a panel of experts who give their views on future developments on a multiple round basis. The study then evaluates 14 Forest Engineering systems for pine sawtimber, pine pulpwood and Eucalyptus pulpwood, based on various scenarios of the future. The scenario matrix is based on the future cost of labour vs. the future cost of machinery. Finally, a strategy is proposed on how the South African forestry industry should prepare itself for the future. / AFRIKAANSE OPSOMMING: Die doelwit van die studie is om 'n nuwe metode te ontwikkel waarmee 'n vooruitskatting van die Bosingenieurswese waardeketting gemaak kan word. Die metode word dan in die Suid-Afrikaanse konteks toegepas om die geldigheid daarvan te beproef. Die Suid-Afrikaanse resultate word voorts gebruik om 'n nasionale Bosingenieurswese strategie voor te stel vir die bedryf. Dit is nodig om die verlede te verstaan, voor die toekoms vooruitgeskat kan word. Om dié rede is die historiese ontwikkeling van bosingenieurswese bespreek, in beide 'n internasionale, sowel as 'n Suid Afrikaanse konteks. Die huidige status quo van Bosingenieurswese in Suid Afrika is vasgestel deur 'n nasionale opname waarby plantasies van groter as 200 ha ingesluit is. Die resultate van die opname word weergegee in Hoofstuk 2. As gevolg van die belangrikheid van beide globalisering en tegnologie, is 'n literatuur studie ingesluit in Hoofstuk 3 oor die relevansie van tegnologie in die besigheidswêreld van vandag, asook en 'n bespreking van verskeie vooruitskattingstegnieke wat in die studie gebruik kan word. Hierdie vooruitskattinge is 'n kombinasie van tradisionele vooruitskattings tegnieke, tegnologie vooruitskattingstegnieke en tegnieke wat gebruik word vir strategiese beplanning. Verskeie benaderinge tot finansiële analise is ook bespreek. Dit sluit tradisionele masjienkoste berekening in. Die rede hiervoor is om vas te stel watter metode die mees geskikte sou wees om verskeie Bosingenieurswese sisteme met mekaar te vergelyk. Die kern van die studie lê in die kombinasie van hierdie metodes om 'n bruikbare metode te ontwerp om die Bosingenieurswese waardeketting vooruit te skat. Hierdie ontwerp word in Hoofstuk 4 bespreek. Die metode word in Hoofstuk 5 beproef, deur die toepassing daarvan op die Suid Afrikaanse bosbedryf. Internasionale bosingenieurswese tendense is vasgestel deur middel van 'n Delphi studie. Hierdie vooruitskatting maak gebruik van 'n paneel van kundiges wat hulle siening oor die toekoms uitspreek deur verskeie rondtes van vrae wat aan hulle gestel word. Die studie evalueer hierna 14 Bosingenieurswese sisteme vir denne saaghout, denne pulphout en Eucalyptus pulphout, gebaseer op 'n scenario-analise van die toekoms. Die scenario matriks is gefundeer op die toekomstige koste van arbeid teenoor die toekomstige koste van masjinerie. As 'n finale stap word voorgestel hoe die Suid Afrikaanse bosbedryf kan voorberei om die toekoms tegemoet te gaan.

Thesis (PhD(For))--Stellenbosch University, 2012. / The subtropical ecosystem of the Zululand coastal plain is prized by the South African commercial plantation forestry industry for its rapid clonal Eucalyptus growth, short rotations (6 to 7 years) and high yields. This region is typified by sandy soils that are low in clay and organic matter, have small nutrient reserves and are poorly buffered against nutrient loss. The subtropical climate induces rapid decomposition of residues and tree litter resulting in small litter nutrient pools and rapid nutrient release into the soil, particularly after clearfelling. A combination of large nutrient demands through rapid growth, rapid nutrient turnover and small soil nutrient reserves implies that sites in this region are sensitive and may be at risk of nutrient decline under intensive management. The work in this study set out to determine the risk of nutrient depletion through harvesting and residue management on a site within the Zululand region, to assess nutritional sustainability and the risk of yield decline in successive rotations. Some bulk biogeochemical cycling processes of macro-nutrients nitrogen (N), phosphorus (P), potassium (K), calcium (Ca) and magnesium (Mg) were assessed, and assessments also included sodium (Na). An existing Eucalyptus stand was clearfelled and treatments were imposed on the residues after broadcasting to simulate various levels of nutrient loss through levels of harvesting intensity and residue management. These included residue burning (Burn), residue retention (No-Burn), fertilisation (stem wood nutrient replacement), whole tree harvesting and residue doubling. Outer blocks of the stand were not felled, but included as replicates of an undisturbed standing crop treatment. Biogeochemical nutrient cycling processes were assessed primarily in the standing crop, Burn and No-Burn treatments, in the assumption that these represented the furthest extremes of nutrient loss. Data collection commenced a year prior to clearfelling and continued to two years and six months after planting with key data collection over a 20.1 month period from clearfelling to canopy closure (one year after planting). Water related nutrient pools and fluxes were assessed as atmospheric deposition (bulk rainfall, throughfall and stemflow) and gravitational leaching to 1m soil depth. Drainage fluxes were predicted using the Hydrus model and real-time soil moisture data. Zero tension lysimeters collected soil solution for chemical analysis. Sequential coring in the 0 to 30cm soil layer was used to determine in situ soil N mineralisation. Soil chemical and physical properties were assessed over the first meter of soil at clearfelling and new crop canopy closure to determine soil nutrient pools sizes. Biomass nutrient fluxes were assessed from litterfall, residue and litter decomposition, and above ground accretion into the tree biomass. Leaching and N mineralisation were monitored in the No-Burn, Burn and standing crop treatments only. Atmospheric deposition, while variable, was shown to be responsible for large quantities of nutrients added to the Eucalyptus stand. Nitrogen and K additions were relatively high, but within ranges reported in previous studies. Rapid tree canopy expansion and subsequent soil water utilisation in the standing crop permitted little water to drain beyond 1m resulting in small leaching losses despite a sandy well drained soil. Further leaching beyond this depth was unlikely under the conditions during the study period. Mineralisation and immobilisation of N also remained low with net immobilisation occurring. The standing crop was shown to be a relatively stable system that, outside of extreme climatic events, had a relatively balanced or positive nutrient budget (i.e. nutrient inputs minus outputs). Large quantities of nutrients were removed with stem-wood-only harvesting in the No-Burn treatment leaving substantial amounts on the soil surface in the harvest residues. Whole tree removal increased losses of all nutrients resulting in the largest losses of P and base cations compared to all other treatments. This was mostly due to high nutrient concentrations in the removed bark. Loss of N in the Burn treatment exceeded whole tree N losses through combustion of N held in the harvest residues and litter layer. The majority of K leached from the residues prior to burning and a relatively small fraction of the base cations were lost from the partially decomposed residues during burning. Ash containing substantial amounts of Ca and relatively large amounts of N and Mg remained after burning. Surface soil Ca and Mg was significantly increased by the ash which moved into the soil with rainfall directly after burning. Rapid soil moisture recharge occurred within a few months after clearfelling, increasing leaching from the upper 50cm of soil. Clearfelling increased net N mineralisation rates, increasing mobile NO3-N ions in the soil surface layers. Nitrate concentration peaked and K concentration dipped in the upper soil layers of the Burn treatment directly after burning. Deep drainage and leaching (beyond 1m depth) over the 20.1 month period was, however, not significantly different between the Burn and No-Burn treatments. Rapid soil moisture depletion and nutrient uptake with new crop growth reduced leaching fluxes to levels similar to the standing crop by six months after planting. Taking the full rotation into account, clearfelling induced a short-lived spike in N and cation leaching compared with the low leaching losses in the undisturbed standing crop. Soil N mineralisation over the 20.1 month period in the burnt treatment was half that of the No-Burn treatment. Growth and nutrient accumulation was significantly higher in the fertilised treatment than in other treatments up to 2.5 years of age. Growth in the Burn treatment was greatest compared to other treatments during the first few months, but slowed thereafter. No significant growth differences were found between all other treatments from a year to 2.5 years after planting. Early growth was therefore apparently not limited by N supply despite large differences in N mineralisation between Burn and No-Burn. Foliar vector analysis indicated that fertilisation improved growth initially through increased foliar N and P at six months after planting followed by Mg and Ca at one year. The Burn treatment was not nutrient limited. These growth results contrasted with similar international research on sandy tropical sites where growth was reduced after residue removal and increased after residue doubling. The combined nutrients released from pools in the litter layer or ash and soil in addition to atmospheric inputs were sufficient to provide most nutrients required to maintain similar growth rates across all treatments. This demonstrated the importance of residue derived nutrients to early growth nutrient supply. Reduced N mineralisation through a lack of substrate may limit N supply later in the rotation where residue had been removed. Construction of a nutrient budget for the system revealed that high levels of atmospheric inputs have the potential to partially replenish a large proportion N, K, and Ca lost during clearfelling, provided losses are constrained to stemwood removal only. However, loss of Mg that occurred primarily through leaching may not be replaced under the low Mg inputs recorded in this study. Larger nutrient removals (i.e. stemwood plus other plant parts) placed a heavier reliance on the small soil nutrient pools at this site which can limit future productivity. More intense harvesting and residue management practices dramatically increased the risk of nutrient depletion. Losses of specific nutrients depended on a combination of clearfelling biomass removal, residue burning and subsequent leaching. Nitrogen losses due to harvesting and burning were more substantial than those due to leaching. Mg and K losses depended most strongly on the time after clearfelling before re-establishment of the new crop and rainfall patterns, while Ca and P losses depended directly on the amount of biomass removed. Depletion risk was the greatest for Mg and K through rapid leaching, even after stem wood only removal. Deep root uptake and deep drainage with associated cation loss needs to be investigated further to quantify ecosystem losses and recovery of cations displaced beyond 1m. Atmospheric deposition is one of major factors countering nutrient losses. However, atmospheric inputs may not be reliable as these may lessen in future through pollution control legislation and climate change. Changes in growth rate under poor nutrient management practices are small and difficult to detect relative to the large impacts of changing weather patterns (drought), wildfire and pest and disease. This makes it difficult to prove nutrient related growth decline. It may be possible that improvements in genetics, silvicultural technologies and atmospheric inputs may also be masking site decline (in general) and in part explain the lack of evidence of a growth reduction in the region. As the poorly buffered sandy soils on the Zululand Coast are at risk of nutrient depletion under the short rotation, high productivity stands, it may be necessary to stipulate more conservative harvesting and residue management practices. A more conservative stem-wood only harvesting regime is recommended, retaining all residues on site. Residue burning should be avoided if N losses become a concern. The length of the inter-rotation period must be kept short to reduce cation leaching losses. Site nutrient pools need to be monitored and cations may eventually need to be replenished through application of fertilisers or ash residues from pulp mills. Management practices therefore need to be chosen based on the specific high risk nutrients in order to maintain a sustainable nutrient supply to current and future plantation grown Eucalyptus.

Thesis (MFor)--University of Stellenbosch, 2003. / ENGLISH ABSTRACT: The factors determining habitat selection of large herbivores, on a private wildlife reserve in semi-arid southeastern Zimbabwe, were investigated. Gross vegetative structure, herbaceous composition and topographic features thought to determine herbivore distribution were measured. Seasonal variation in resource distribution was considered, and research therefore extended over an entire year. Herbivore distribution and ecological niche separation was explained through several important environmental variables, and potential for inter-specific competition inferred. Additionally, predictive habitat suitability models were designed for each of the grazing species in the critical dry season. Herbivores showed a large degree of niche overlap in both the hotwet season and the cool-dry season, when food resources were more plentiful. Niche separation between grazers was pronounced in the hot-dry season. Herbivore distribution was associated most closely with distance to water, grass sward height, time since burn, woody plant density and by the presence of predominant grasses, these being Urochloa mossambicensis, Panicum maximum, Heteropogon contortus and Digitaria eriantha. Ecological separation of herbivores by the grasses P. maximum, H. contortus and D. eriantha was more indicative of associated environmental variables than feeding niche separation. A GIS-based analysis, using species presence data and quantitative coverages of environmental variables, produced maps of gradations of habitat suitability for grazing species during the dry season. Results of both analyses were integrated and gave a better understanding of ecological separation, and possible competitive interactions, among the large herbivore community on Malilangwe Estate. Recommendations were made based on the interpretation of findings, within the context of available management options. / AFRIKAANSE OPSOMMING: Die bepalende faktore van habitat seleksie by groot herbivore op ‘n privaat wildreservaat in semi-dorre suidoos Zimbabwe is ondersoek. Globale plantegroei stuktuur, kruidagtige samestelling en topografiese eienskappe wat glo herbivoor verspreiding bepaal, is gemeet. Seisoenale variasie in hulpbronverspreiding is in ag geneem en dus het navorsing oor ‘n hele jaar gestrek. Herbivoor verspreiding en ekologiese nisskeiding is verduidelik deur verskeie belangrike omgewingsveranderlikes en die potensiaal vir interspesifieke kompetisie is afgelei. Boonop is voorspellende habitat-geskiktheidsmodelle ontwerp vir elk van die weidingspesies in die krities droë seisoen. Herbivore toon ‘n hoë graad van nis oorvleueling in sowel die warm, nat seisoen as die koel, droë seisoen wanneer voedingsbronne meer volop is. Nis verdeling tussen weidiere was duidelik herkenbaar in die warm, droë seisoen. Herbivoor verspreiding is meestal geassosieer met die afstand na die water, die grasveld hoogte, tydperk sedert ‘n brand, digtheid van houtagtige plantsoorte en met die teenwoordigheid van die oorheersende grasse, Urochloa mossambicensis, Panicum maximum, Heteropogon contortus en Digitaria eriantha. Die ekologiese skeiding van herbivore deur die grasse P. maximum, H. contortus en D. eriantha het meer gedui op geassosieerde omgewingsveranderlikes as op skeiding van voedingsnisse. ‘n GIS-gebaseerde analise wat spesie-teenwoordigheidsdata en kwantitatiewe dekking van omgewingsveranderlikes gebruik, het klassifikasiekaarte geproduseer van habitatgeskiktheid vir weidiere tydens die droë seisoen. Resultate van beide analises is geïntegreer en het ‘n beter begrip van ekologiese skeiding en moontlike kompeterende interaksies tussen die groot herbivore gemeenskap op Malilangwe Estate tot gevolg gehad. Aanbevelings is gemaak, gebaseer op die interpretasie van bevindinge, binne die konteks van beskikbare bestuursopsies.