Donor-acceptor and thiophene based π-conjugated molecules and polymers, along with fullerene derivatives, are extensively used active components in the photoactive layer of organic photovoltaic devices. In this dissertation, we make use of several computational methodologies to investigate structure-property relationships of these organic systems in their molecular forms. We begin with an overview of the field of organic photovoltaics and some of the important problems in organic solar cells that are currently being investigated. This is then followed by a brief review of the electronic-structure methods (e.g. Hartree-Fock theory, Density Functional Theory, and Time-dependent Density Functional Theory) that are employed. We then present the main results of the dissertation. Chapter 3 provides a broad overview on how changes to the donor-acceptor copolymer chemical structure impacts its intrinsic geometric, electronic, and optical properties. Chapter 4 focuses on the characterization of the lowest excited-states and optical absorption spectra in donor-acceptor copolymers. In Chapter 5, we investigate the effects of alkyl side-chain placements in the π-conjugated backbone of oligothiophenes and how that impacts their intramolecular properties as well as the oligomer:fullerene interfacial interactions. Chapter 6 presents our investigation on the role of oligomer:fullerene configuration and reorganization energy on exciton-dissociation and charge-recombination processes. Finally, a synopsis of the work and further considerations are presented in Chapter 7.

Donor-acceptor (D-A) copolymers have revolutionized the field of organic electronics over the last decade. Comprised of a electron rich and an electron deficient molecular unit, these copolymers facilitate the systematic modification of the material's optoelectronic properties. The ability to tune the optical band gap and to optimize the molecular frontier orbitals as well as the manifold of structural sites that enable chemical modifications has created a tremendous variety of copolymer structures. Today, these materials reach or even exceed the performance of amorphous inorganic semiconductors. Most impressively, the charge carrier mobility of D-A copolymers has been pushed to the technologically important value of 10 cm^{2}V^{-1}s^{-1}. Furthermore, owed to their enormous variability they are the material of choice for the donor component in organic solar cells, which have recently surpassed the efficiency threshold of 10%. Because of the great number of available D-A copolymers and due to their fast chemical evolution, there is a significant lack of understanding of the fundamental physical properties of these materials. Furthermore, the complex chemical and electronic structure of D-A copolymers in combination with their semi-crystalline morphology impede a straightforward identification of the microscopic origin of their superior performance. In this thesis, two aspects of prototype D-A copolymers were analysed. These are the investigation of electron transport in several copolymers and the application of low band gap copolymers as acceptor component in organic solar cells. In the first part, the investigation of a series of chemically modified fluorene-based copolymers is presented. The charge carrier mobility varies strongly between the different derivatives, although only moderate structural changes on the copolymers structure were made. Furthermore, rather unusual photocurrent transients were observed for one of the copolymers. Numerical simulations of the experimental results reveal that this behavior arises from a severe trapping of electrons in an exponential distribution of trap states. Based on the comparison of simulation and experiment, the general impact of charge carrier trapping on the shape of photo-CELIV and time-of-flight transients is discussed. In addition, the high performance naphthalenediimide (NDI)-based copolymer P(NDI2OD-T2) was characterized. It is shown that the copolymer posses one of the highest electron mobilities reported so far, which makes it attractive to be used as the electron accepting component in organic photovoltaic cells.par Solar cells were prepared from two NDI-containing copolymers, blended with the hole transporting polymer P3HT. I demonstrate that the use of appropriate, high boiling point solvents can significantly increase the power conversion efficiency of these devices. Spectroscopic studies reveal that the pre-aggregation of the copolymers is suppressed in these solvents, which has a strong impact on the blend morphology. Finally, a systematic study of P3HT:P(NDI2OD-T2) blends is presented, which quantifies the processes that limit the efficiency of devices. The major loss channel for excited states was determined by transient and steady state spectroscopic investigations: the majority of initially generated electron-hole pairs is annihilated by an ultrafast geminate recombination process. Furthermore, exciton self-trapping in P(NDI2OD-T2) domains account for an additional reduction of the efficiency. The correlation of the photocurrent to microscopic morphology parameters was used to disclose the factors that limit the charge generation efficiency. Our results suggest that the orientation of the donor and acceptor crystallites relative to each other represents the main factor that determines the free charge carrier yield in this material system. This provides an explanation for the overall low efficiencies that are generally observed in all-polymer solar cells. / Donator-Akzeptor (D-A) Copolymere haben das Feld der organischen Elektronik revolutioniert. Bestehend aus einer elektronen-reichen und einer elektronen-armen molekularen Einheit,ermöglichen diese Polymere die systematische Anpassung ihrer optischen und elektronischen Eigenschaften. Zu diesen zählen insbesondere die optische Bandlücke und die Lage der Energiezustände. Dabei lassen sie sich sehr vielseitig chemisch modifizieren, was zu einer imensen Anzahl an unterschiedlichen Polymerstrukturen geführt hat. Dies hat entscheidend dazu beigetragen, dass D-A-Copolymere heute in Bezug auf ihren Ladungstransport die Effizienz von anorganischen Halbleitern erreichen oder bereits übetreffen. Des Weiteren lassen sich diese Materialien auch hervorragend in Organischen Solarzellen verwenden, welche jüngst eine Effizienz von über 10% überschritten haben. Als Folge der beträchtlichen Anzahl an unterschiedlichen D-A-Copolymeren konnte das physikalische Verständnis ihrer Eigenschaften bisher nicht mit dieser rasanten Entwicklung Schritt halten. Dies liegt nicht zuletzt an der komplexen chemischen und mikroskopischen Struktur im Film, in welchem die Polymere in einem teil-kristallinen Zustand vorliegen. Um ein besseres Verständnis der grundlegenden Funktionsweise zu erlangen, habe ich in meiner Arbeit sowohl den Ladungstransport als auch die photovoltaischen Eigenschaften einer Reihe von prototypischen, elektronen-transportierenden D-A Copolymeren beleuchtet. Im ersten Teil wurden Copolymere mit geringfügigen chemischen Variationen untersucht. Diese Variationen führen zu einer starken Änderung des Ladungstransportverhaltens. Besonders auffällig waren hier die Ergebnisse eines Polymers, welches sehr ungewöhnliche transiente Strom-Charakteristiken zeigte. Die nähere Untersuchung ergab, dass in diesem Material elektrisch aktive Fallenzustände existieren. Dieser Effekt wurde dann benutzt um den Einfluss solcher Fallen auf transiente Messung im Allgemeinen zu beschreiben. Zusätzlich wurde der Elektronentransport in einem neuartigen Copolymer untersucht, welche die bis dato größte gemesse Elektronenmobilität für konjugierte Polymere zeigte. Darauf basierend wurde versucht, die neuartigen Copolymere als Akzeptoren in Organischen Solarzellen zu implementieren. Die Optimierung dieser Zellen erwies sich jedoch als schwierig, konnte aber erreicht werden, indem die Lösungseigenschaften der Copolymere untersucht und systematisch gesteuert wurden. Im Weiteren werden umfangreiche Untersuchungen zu den relevanten Verlustprozessen gezeigt. Besonders hervorzuheben ist hier die Beobachtung, dass hohe Effizienzen nur bei einer coplanaren Packung der Donator/Akzeptor-Kristalle erreicht werden können. Diese Struktureigenschaft wird hier zum ersten Mal beschrieben und stellt einen wichtigen Erkenntnisgewinn zum Verständnis von Polymersolarzellen dar.

Organic semiconducting polymers are widely employed in organic electronics such as organic photovoltaics (OPVs), organic field-effect transistors (OFETs) and organic light emitting diodes (OLEDs). Their remarkable mechanical and charge transport properties as well as solution processability allow low-cost fabrication of light-weight and flexible devices. Among them indacenodithiophene (IDT)-based materials are promising candidates for application in organic electronics. Due to their low energetic disorder, extended conjugation and high electron density the IDT-based polymers show high field-effect mobilities and high absorption coefficients. However, their synthesis suffers from long reaction sequences and is often accomplished using toxic materials. Commercialization requires development of more efficient and sustainable reaction pathways to ease tailoring of structures and to limit molecular defects. Herein, the development of new synthetic pathways towards IDT-based polymers is presented in which all C-C coupling steps are achieved by C-H activation – an atom-economic alternative to conventional transition-metal catalyzed cross couplings. Two different strategies were established to synthesize a series of well-defined IDT-based homo- and copolymers with different side chain patterns and varied molecular weights. The first way starts by synthesis of a precursor polymer and subsequent cyclization affording IDT homopolymers. In the second approach, cyclized IDT monomers were prepared first and then polymerized using direct arylation polycondensation (DAP) yielding IDT homo- and copolymers. The synthetic pathways were optimized in terms of maximizing molecular weights and limiting defect structures. While the first pathway enables synthesis of well-defined homopolymers, the latter is the method of choice for preparation of IDT-based copolymers in high yields and adjustable molecular weights. The polymers were further characterized in detail by optical, thermal, electrical and morphological analyses. OFETs as well as all-polymer solar cells (all-PSCs) were fabricated to investigate the influence of structural modifications and molecular weight on their optoelectronic performance. Thus, this thesis provides a comprehensive study of the structure-property correlations of IDT-based polymers and simplified synthetic protocols for the design and preparation of donor-acceptor copolymers in the future.