• Refine Query
  • Source
  • Publication year
  • to
  • Language
  • 3
  • 1
  • Tagged with
  • 5
  • 5
  • 4
  • 3
  • 2
  • 2
  • 2
  • 2
  • 2
  • 2
  • 2
  • 2
  • 2
  • 2
  • 2
  • About
  • The Global ETD Search service is a free service for researchers to find electronic theses and dissertations. This service is provided by the Networked Digital Library of Theses and Dissertations.
    Our metadata is collected from universities around the world. If you manage a university/consortium/country archive and want to be added, details can be found on the NDLTD website.
1

Validation and Uncertainty Quantification of Doublet Lattice Flight Loads using Flight Test Data

Olson, Nicholai Kenneth Keeney 19 July 2018 (has links)
This paper presents a framework for tuning, validating, and quantifying uncertainties for flight loads. The flight loads are computed using a Nastran doublet lattice model and are validated using measured data from a flight loads survey for a Cessna Model 525B business jet equipped with Tamarack® Aerospace Group’s active winglet modification, ATLAS® (Active Technology Load Alleviation System). ATLAS® allows for significant aerodynamic improvements to be realized by reducing loads to below the values of the original, unmodified airplane. Flight loads are measured using calibrated strain gages and are used to tune and validate a Nastran doublet-lattice flight loads model. Methods used to tune and validate the model include uncertainty quantification of the Nastran model form and lead to an uncertainty quantified model which can be used to estimate flight loads at any given flight condition within the operating envelope of the airplane. The methods presented herein improve the efficiency of the loads process and reduce conservatism in design loads through improved prediction techniques. Regression techniques and uncertainty quantification methods are presented to more accurately assess the complexities in comparing models to flight test results. / Master of Science
2

The Effect of Wing Damage on Aeroelastic Behavior

Conyers, Howard J. January 2009 (has links)
<p>Theoretical and experimental studies are conducted in the field of aeroelasticity. Specifically, two rectangular and one cropped delta wings with a hole are analyzed in this dissertation for their aeroelastic behavior.</p><p>The plate-like wings are modeled using the finite element method for the structural theory. Each wing is assumed to behave as a linearly elastic and isotropic, thin plate. These assumptions are those of small-deflection theory of bending which states that the plane sections initially normal to the midsurface remain plane and normal to that surface after bending. The wings are modeled in low speed flows according to potential flow theory. The potential flow is governed by the aerodynamic potential equation, a linear partial differential equation. The aerodynamic potential equation is solved using a distribution of doublets that relates pressure to downwash in the doublet lattice method. A hole in a wing-like structure is independently investigated theoretically and experimentally for its structural and aerodynamic behavior.</p><p>The aeroelastic model couples the structural and aerodynamic models using Lagrange's equations. The flutter boundary is predicted using the V-g method. Linear theoretical models are capable of predicting the critical flutter velocity and frequency as verified by wind tunnel tests. Along with flutter prediction, a brief survey on gust response and the addition of stores(missile or fuel tanks) are examined.</p> / Dissertation
3

Advanced linear methods for T-tail aeroelasticity / Louwrens Hermias van Zyl

Van Zyl, Louwrens Hermias January 2011 (has links)
Flutter is one of the primary aeroelastic phenomena that must be considered in aircraft design. Flutter is a self-sustaining structural vibration in which energy is extracted from the air flow and transferred to the structure. The amplitude of the vibration grows exponentially until structural failure occurs. Flutter stability requirements often influence the design of an aircraft, making accurate flutter prediction capabilities an essential part of the design process. Advances in computational fluid dynamics and computational power make it possible to solve the fluid flow and structural dynamics simultaneously, providing highly accurate solutions especially in the transonic flow regime. This procedure is, however, too time-consuming to be used in the design optimisation process. As a result panel codes, e.g., the doublet lattice method, and modal-based structural analysis methods are still being used extensively and continually improved. One application that is lagging in terms of accuracy and simplicity (from the user’s perspective) is the flutter analysis of T-tails. The flutter analysis of a T-tail usually involves the calculation of additional aerodynamic loads, apart from the loads calculated by the standard unsteady aerodynamic codes for conventional empennages. The popular implementations of the doublet lattice method do not calculate loads due to the in-plane motion (i.e., lateral or longitudinal motion) of the horizontal stabiliser or the in-plane loads on the stabiliser. In addition, these loads are dependent on the steady-state load distribution on the stabiliser, which is ignored in the doublet lattice method. The objective of the study was to extend the doublet lattice method to calculate the additional aerodynamic loads that are crucial for T-tail flutter analysis along with the customary unsteady air loads for conventional configurations. This was achieved by employing the Kutta-Joukowski theorem in the calculation of unsteady air loads on lifting surface panels. Calculating the additional unsteady air loads for T-tails within the doublet lattice method significantly reduces the human effort required for T-tail flutter analysis as well as the opportunities for introducing errors into the analysis. During the course of the study it became apparent that it was necessary to consider the quadratic mode shape components in addition to the linear mode shape components. Otherwise the unsteady loads due to the rotation (“tilting”) of the steady-state load on the stabiliser, one of the additional aerodynamic loads that are crucial for T-tail flutter analysis, would give rise to spurious generalised forces. In order to reduce the additional burden of determining the quadratic mode shape components, methods for calculating quadratic mode shape components using linear finite element analysis or estimating them from the linear mode shape components were developed. Wind tunnel tests were performed to validate the proposed computational method. A T-tail flutter model which incorporated a mechanism for changing the incidence angle of the horizontal stabiliser, and consequently the steady-state load distribution on the horizontal stabiliser, was used. The flutter speed of this model as a function of the horizontal stabiliser incidence was determined experimentally and compared to predictions. Satisfactory correlation was found between predicted and experimentally determined flutter speeds. / Thesis (M.Ing. (Chemical Engineering))--North-West University, Potchefstroom Campus, 2012
4

Advanced linear methods for T-tail aeroelasticity / Louwrens Hermias van Zyl

Van Zyl, Louwrens Hermias January 2011 (has links)
Flutter is one of the primary aeroelastic phenomena that must be considered in aircraft design. Flutter is a self-sustaining structural vibration in which energy is extracted from the air flow and transferred to the structure. The amplitude of the vibration grows exponentially until structural failure occurs. Flutter stability requirements often influence the design of an aircraft, making accurate flutter prediction capabilities an essential part of the design process. Advances in computational fluid dynamics and computational power make it possible to solve the fluid flow and structural dynamics simultaneously, providing highly accurate solutions especially in the transonic flow regime. This procedure is, however, too time-consuming to be used in the design optimisation process. As a result panel codes, e.g., the doublet lattice method, and modal-based structural analysis methods are still being used extensively and continually improved. One application that is lagging in terms of accuracy and simplicity (from the user’s perspective) is the flutter analysis of T-tails. The flutter analysis of a T-tail usually involves the calculation of additional aerodynamic loads, apart from the loads calculated by the standard unsteady aerodynamic codes for conventional empennages. The popular implementations of the doublet lattice method do not calculate loads due to the in-plane motion (i.e., lateral or longitudinal motion) of the horizontal stabiliser or the in-plane loads on the stabiliser. In addition, these loads are dependent on the steady-state load distribution on the stabiliser, which is ignored in the doublet lattice method. The objective of the study was to extend the doublet lattice method to calculate the additional aerodynamic loads that are crucial for T-tail flutter analysis along with the customary unsteady air loads for conventional configurations. This was achieved by employing the Kutta-Joukowski theorem in the calculation of unsteady air loads on lifting surface panels. Calculating the additional unsteady air loads for T-tails within the doublet lattice method significantly reduces the human effort required for T-tail flutter analysis as well as the opportunities for introducing errors into the analysis. During the course of the study it became apparent that it was necessary to consider the quadratic mode shape components in addition to the linear mode shape components. Otherwise the unsteady loads due to the rotation (“tilting”) of the steady-state load on the stabiliser, one of the additional aerodynamic loads that are crucial for T-tail flutter analysis, would give rise to spurious generalised forces. In order to reduce the additional burden of determining the quadratic mode shape components, methods for calculating quadratic mode shape components using linear finite element analysis or estimating them from the linear mode shape components were developed. Wind tunnel tests were performed to validate the proposed computational method. A T-tail flutter model which incorporated a mechanism for changing the incidence angle of the horizontal stabiliser, and consequently the steady-state load distribution on the horizontal stabiliser, was used. The flutter speed of this model as a function of the horizontal stabiliser incidence was determined experimentally and compared to predictions. Satisfactory correlation was found between predicted and experimentally determined flutter speeds. / Thesis (M.Ing. (Chemical Engineering))--North-West University, Potchefstroom Campus, 2012
5

Transonic Flutter for aGeneric Fighter Configuration / Transoniskt fladder för en generiskflygplanskonfiguration

Bååthe, Axel January 2018 (has links)
A hazardous and not fully understood aeroelastic phenomenon is the transonic dip,the decrease in flutter dynamic pressure that occurs for most aircraft configurationsin transonic flows. The difficulty of predicting this phenomenon forces aircraft manufacturersto run long and costly flight test campaigns to demonstrate flutter-free behaviourof their aircraft at transonic Mach numbers.In this project, subsonic and transonic flutter calculations for the KTH-NASA genericfighter research model have been performed and compared to existing experimentalflutter data from wind tunnel tests performed at NASA Langley in 2016. For the fluttercalculations, industry-standard linear panel methods have been used together with afinite element model from NASTRAN.Further, an alternative approach for more accurate transonic flutter predictions usingthe full-potential solver Phi has been investigated. To predict flutter using this newmethodology a simplified structural model has been used together with aerodynamicmeshes of the main wing. The purpose of the approach was to see if it was possibleto find a method that was more accurate than panel methods in the transonic regimewhilst still being suitable for use during iterative design processes.The results of this project demonstrated that industry-standard linear panel methodssignificantly over-predict the flutter boundary in the transonic regime. It was alsoseen that the flutter predictions using Phi showed potential, being close to the linearresults for the same configuration as tested in Phi. For improved transonic accuracy inPhi, an improved transonic flow finite element formulation could possibly help .Another challenge with Phi is the requirement of an explicit wake from all liftingsurfaces in the aerodynamic mesh. Therefore, a method for meshing external storeswith blunt trailing edges needs to be developed. One concept suggested in this projectis to model external stores in "2.5D", representing external stores using airfoils withsharp trailing edges. / Ett farligt och inte helt utrett aeroelastiskt fenomen är den transoniska dippen, minskningeni dynamiska trycket vid fladder som inträffar för de flesta flygplan i transoniskaflöden. Svårigheten i att prediktera detta fenomen tvingar flygplanstillverkare attbedriva tidskrävande och kostsam flygprovsverksamhet för att demonstrera att derasflygplan ej uppvisar fladderbeteende i transonik inom det tilltänkta användningsområdet.I detta projekt har fladderberäkningar genomförts i både underljud och transonikför en generisk stridsflygplansmodell i skala 1:4 ämnad för forskning, byggd som ettsamarbete mellan KTH och NASA. Beräkningarna har också jämförts med fladderresultatfrån vindtunnelprov genomförda vid NASA Langley under sommaren 2016. Förfladderberäkningarna har industri-standarden linjära panelmetoder används tillsammansmed en befintlig finit element modell för användning i NASTRAN.Vidare har ett alternativt tillvägagångssätt för att förbättra precisionen i transoniskafladderresultat genom att använda potentiallösaren Phi undersökts. En förenkladstrukturmodell har använts tillsammans med aerodynamiska nät av huvudvingen föratt prediktera fladder. Syftet med denna metodik var att undersöka om det var möjligtatt hitta en metod som i transoniska flöden var mer exakt än panelmetoder men somfortfarande kunde användas i iterativa design processer.Resultaten från detta projekt visade att linjära panelmetoder, som de som används iindustrin, är signifikant icke-konservativa gällande fladdergränsen i transonik. Resultatenfrån Phi visade potential genom att vara nära de linjära resultaten som räknadesfram med hjälp av panelmetoder för samma konfiguration som i Phi. För ökad transonisknoggrannhet i Phi kan möjligen en förbättrad transonisk element-formuleringhjälpa.En annan utmaning med Phi är kravet på en explicit vak från alla bärande ytor idet aerodynamiska nätet. Därför behöver det utvecklas en metodik för nätgenereringav yttre laster med trubbiga bakkanter. Ett koncept som föreslås i denna rapport är attmodellera yttre laster i "2.5D", där alla yttre laster beskrivs genom att använda vingprofilermed skarpa bakkanter.

Page generated in 0.0727 seconds