Spelling suggestions: "subject:"crop coating"" "subject:"drop coating""
1 |
Fenômeno fotoeletrocatalítico mediada por UV/TiO2: da rápida imobilização do TiO2 P25 em eletrodos de ouro ao seu comportamento na fotooxidação do sistema modelo EDTA em células de camada delgada irradiadas por LED UV / The photoelectrocatalytic phenomenon mediated by UV/TiO2: from the quick immobilization of the P25 TiO2 on gold electrodes to its behavior on the photooxidation of the model system EDTA in thin layer-type cells irradiated by UV LEDBaccaro, Alexandre Luiz Bonizio 22 February 2017 (has links)
O demorado tratamento térmico, comum no preparo de fotocatalisadores e sua imobilização em substratos, foi contornado nesta tese, em que se investigaram duas estratégias de modificação de eletrodos de ouro com TiO2 P25. A primeira consiste em promover a formação de uma nanocamada pela simples exposição do metal por 1 min à suspensão aquosa de TiO2 (10 g L-1 em HCl 0,1 mol L-1); na segunda, deposita-se uma pequena alíquota (5 ou 8 µL) da suspensão diretamente no substrato (drop coating) para secá-lo em seguida por irradiação com lâmpada incandescente (60 W a 20 cm), obtendo-se bons resultados de uma a três camadas depositadas. Comprovou-se grande aumento da estabilidade da suspensão aquosa e duplicação da atividade fotocatalítica do nanofilme de TiO2 em decorrência da repulverização de P25 comercial em almofariz, melhoria inalcançável por sonicação da suspensão. O tamanho de partícula médio obtido por DLS para o TiO2 disperso em meio de HCl 0,1 mol L-1 atingiu 103±3 nm, enquanto que o filme depositado na superfície do ouro (observado por MEV e caracterizado por EDS) não ultrapassou 100 nm de espessura, sendo dominado por partículas de diâmetro de 20 (anatase) a 30 nm (rutilo), observadas por MET. A estabilidade da suspensão é susceptível ao ânion do ácido utilizado, sendo que resultados igualmente satisfatórios foram obtidos com HCl e HclO4 0,1 mol L-1, enquanto que para a mesma concentração de H2SO4 o TiO2 sofreu sedimentação rápida e o eletrodo preparado com a suspensão apresentou fotoatividade 10x menor. Filmes de espessuras bastante distintas (100 nm e 2 m) depositados a partir de suspensão 10 g L-1 por contato e drop coating com gota de 5,0 µL, respectivamente, foram comparados em relação à sua capacidade de transporte de elétrons e resposta eletroquímica ao Fe(CN)6 3 1,0 mmol L-1, sendo que a carga líquida formal de oxidação do EDTA 1,0 mmol L-1 é apenas 50 % maior para o filme 20x mais espesso, além de gerar distorções consideráveis nas ondas voltamétricas do sistema-sonda reversível em relação ao filme nanométrico e à superfície polida. Com eletrodos modificados pelo protocolo otimizado de drop coating (8,0 µL de TiO2 2 g L-1), testou-se o efeito da presença de diferentes eletrólitos de suporte (ácidos 0,1 mol L-1) em processos anódicos de fotooxidação em geral. A curva de decaimento da fotocorrente iph com o tempo pode ser descrita por uma equação de decaimento exponencial duplo iph = i0 + A1 exp(k1t) + A2 exp( k21t), permitindo distinguir as contribuições da fotocorrente de oxidação da água (i0) e de termos referentes a dois tipos de sítio superficiais, sendo um de cinética rápida e outro de cinética lenta. A seguinte ordem foi determinada para a fotocorrente total inicial (iph0 total) dos eletrólitos: HNO3 > HClO4 > HCl > H1SO4 > H3PO4 e as explicações propostas para tal se embasam na adsortividade dos ânions no TiO2 e na reatividade dos respectivos traps formados. O mesmo modelo de ajuste matemático foi utilizado para avaliar a fotoatividade do eletrodo modificado pela sua irradiação sucessiva e repetida em HNO3 0,1 mol L-1 (sem EDTA), sendo observada redução significativa principalmente nos parâmetros relativos aos sítios de reação e, assim, sugere-se um impedimento dos mesmos através, p. ex., da formação de peróxidos superficiais. Na presença também de EDTA, a carga líquida total despendida na sua fotooxidação se mantém relativamente constante nas sucessivas irradiações. Por fim, os experimentos de fotooxidação do EDTA sob varredura de potencial revelaram uma região de relação linear entre a fotocorrente e o potencial aplicado ao eletrodo modificado com TiO2 que se estende até a região de saturação de fotocorrente ser atingida, comportamento compatível com filmes nanoparticulados porosos não-dopados. A inclinação da região linear aumenta em função da [EDTA], como se os valores de condutância (di/dE) se elevassem dependendo da reação interfacial. Ajuste de modelo matemático hiperbólico correlacionando a (foto)resistência do filme em função da fotocorrente de saturação R = R0 + kIsph1, fornece resistência ôhmica do filme R0 de 5,0 kΩ e uma constante atrelada ao fotopotencial de 237 mA Ω. Já a curva monotônica de fotocorrente de saturação (Isph) com a [EDTA] apresenta comportamento linear até cerca de 0,7 mmol L-1, sugerindo-se que nessa região o controle por transporte de massa é a etapa limitante do processo global. Acima dessa concentração o coeficiente angular diminui gradualmente à medida que a reação de cinética de captura das lacunas passa a ser o determinante até um limite máximo (aparentemente 5,0 mmol L-1 de EDTA, nas condições do experimento) onde a disponibilidade de lacunas fotogeradas passa a governar. / The lengthy thermal treatment is a common step during the preparation and immobilization of photocatalysers on substrates, which by the way, was overcome in this thesis by the investigation of two strategies of modification of gold electrodes with P25 TiO2. The first one consists in promoting the formation of a nanolayer by the simple exposure of the metal surface to an aqueous suspension of TiO2 (10 g L-1 on 0.1 mol L-1 HCl) during 1 min; the second involves the deposition of a small drop (5 or 8 L) of the suspension on the gold substrate (drop coating) and its drying by irradiation with an incandescent lamp (60 W at 20 cm far), with worthy results also for two or three deposited layers. The stability of this aqueous suspension was appreciably improved by the repulverization of commercial P25 in a grinding mortar. As a consequence the photocatalytic activity conferred to the electrode by the formation of the TiO2 nanofilm doubled. Such improvements cannot be attained by bath sonication of the suspension. The average particle size determined by DLS for the TiO2 dispersed in 0.1 mol L-1 HCl was 103±3 nm, while the film deposited on the surface of gold consisted of particles of 20 nmn (anatase) and 30 nm (rutile) characterized by TEM and barely achieved a thickness of 100 nm (characterized by SEM and EDS). The stability of the modifying suspension is susceptible to the type of anion of the electrolyte. Good results were found with 0.1 mol L-1 HCl and HClO4, but not with 0.1 mol L-1 H2SO4. This last medium causes fast sedimentation of TiO2 and generates electrodes with one tenth of the photoactivity achieved with the other acids. The effect of film thickness on the photoactivity was evaluated for films with 100 nm and 2.0 µm prepared from a 10 g L-1 TiO2 suspension by the contact and drop coating (5 µL) strategies, respectively. The electron transport across both films and the electrochemical response for the 1.0 mmol L-1 Fe(CN) 63- probe was compared. The formal net charge for the 1.0 mmol L-1 EDTA oxidation was only 50 % higher for the 20x thicker film that also considerably distorts the voltammetric waves of the aforementioned reversible probe. The effect of different supporting electrolytes (0.1 mol L-1 acids) on the anodic photooxidation processes in general was tested with electrodes modified by an optimized drop coating protocol (8.0 µL of 2 µg L-1 TiO2). The curve describing the photocurrent decay in function of time might be ascribed to an equation of double exponential decay iph = i0 + A1 exp(k1t) + A2 exp (k2t), which allows the distinction of the contribution of water oxidation (i0) from terms of two types of surface sites: a kinetically fast site and a slow one. The total initial photocurrent (iph0 total) of the following electrolytes decays in the order: HNO3 > HClO4 > HCl > H2SO4 > H3PO4; explanations comprise the adsorbability of each respective anion on TiO2 and the reactivity of the corresponding traps formed. Similar curve fitting applied to the data of photoactivity of the gold electrode during successive irradiations of its surface in 0.1 mol L-1 HNO3 (absence of EDTA) revealed that sites reactivities underwent considerable reduction. It is suggested that during repetitive experiments the sites are impaired by the formation of surface peroxides. However, in the presence of 1.0 mmol L-1 of EDTA, the formal net charge of oxidation of the organic species remains almost unaltered. Ultimately, the experiments concerning the photooxidation of EDTA under linear potential scan revealed a region of linear relation between the photocurrent and the potential applied to the electrode modified with a TiO2 film (nanometric or micrometric), which holds until the saturation photocurrent is attained. This behavior is typical for porous non-doped nanoparticulate electrodes. The slope of the linear region increase somewhat with the EDTA concentration, as though the conductance values (di/dE) were raised depending on the interfacial reaction rate. The fitting of a hyperbolic model R = R0 + kIsph-1 for the correlation of the (photo)resistence (R) of the film with the photocurrent of saturation (Isph) allows the estimation of an ohmic resistance of 5.0 kΩ, and a photopotential related constant of 237 mA Ω. The curve of correlation between Isph and the [EDTA] is linear fit until 0.7 mmol L-1, suggesting that in this initial region the mass transport to the interface is the limiting step of the global process. Above that concentration, the slope of the curve is gradually reduced as the kinetic of capture of the holes becomes the determining step and from 5.0 mmol L-1 on an asymptotic Isph is reached (under the conditions of the experiments), where the holes photogeneration might start governing.
|
2 |
Fenômeno fotoeletrocatalítico mediada por UV/TiO2: da rápida imobilização do TiO2 P25 em eletrodos de ouro ao seu comportamento na fotooxidação do sistema modelo EDTA em células de camada delgada irradiadas por LED UV / The photoelectrocatalytic phenomenon mediated by UV/TiO2: from the quick immobilization of the P25 TiO2 on gold electrodes to its behavior on the photooxidation of the model system EDTA in thin layer-type cells irradiated by UV LEDAlexandre Luiz Bonizio Baccaro 22 February 2017 (has links)
O demorado tratamento térmico, comum no preparo de fotocatalisadores e sua imobilização em substratos, foi contornado nesta tese, em que se investigaram duas estratégias de modificação de eletrodos de ouro com TiO2 P25. A primeira consiste em promover a formação de uma nanocamada pela simples exposição do metal por 1 min à suspensão aquosa de TiO2 (10 g L-1 em HCl 0,1 mol L-1); na segunda, deposita-se uma pequena alíquota (5 ou 8 µL) da suspensão diretamente no substrato (drop coating) para secá-lo em seguida por irradiação com lâmpada incandescente (60 W a 20 cm), obtendo-se bons resultados de uma a três camadas depositadas. Comprovou-se grande aumento da estabilidade da suspensão aquosa e duplicação da atividade fotocatalítica do nanofilme de TiO2 em decorrência da repulverização de P25 comercial em almofariz, melhoria inalcançável por sonicação da suspensão. O tamanho de partícula médio obtido por DLS para o TiO2 disperso em meio de HCl 0,1 mol L-1 atingiu 103±3 nm, enquanto que o filme depositado na superfície do ouro (observado por MEV e caracterizado por EDS) não ultrapassou 100 nm de espessura, sendo dominado por partículas de diâmetro de 20 (anatase) a 30 nm (rutilo), observadas por MET. A estabilidade da suspensão é susceptível ao ânion do ácido utilizado, sendo que resultados igualmente satisfatórios foram obtidos com HCl e HclO4 0,1 mol L-1, enquanto que para a mesma concentração de H2SO4 o TiO2 sofreu sedimentação rápida e o eletrodo preparado com a suspensão apresentou fotoatividade 10x menor. Filmes de espessuras bastante distintas (100 nm e 2 m) depositados a partir de suspensão 10 g L-1 por contato e drop coating com gota de 5,0 µL, respectivamente, foram comparados em relação à sua capacidade de transporte de elétrons e resposta eletroquímica ao Fe(CN)6 3 1,0 mmol L-1, sendo que a carga líquida formal de oxidação do EDTA 1,0 mmol L-1 é apenas 50 % maior para o filme 20x mais espesso, além de gerar distorções consideráveis nas ondas voltamétricas do sistema-sonda reversível em relação ao filme nanométrico e à superfície polida. Com eletrodos modificados pelo protocolo otimizado de drop coating (8,0 µL de TiO2 2 g L-1), testou-se o efeito da presença de diferentes eletrólitos de suporte (ácidos 0,1 mol L-1) em processos anódicos de fotooxidação em geral. A curva de decaimento da fotocorrente iph com o tempo pode ser descrita por uma equação de decaimento exponencial duplo iph = i0 + A1 exp(k1t) + A2 exp( k21t), permitindo distinguir as contribuições da fotocorrente de oxidação da água (i0) e de termos referentes a dois tipos de sítio superficiais, sendo um de cinética rápida e outro de cinética lenta. A seguinte ordem foi determinada para a fotocorrente total inicial (iph0 total) dos eletrólitos: HNO3 > HClO4 > HCl > H1SO4 > H3PO4 e as explicações propostas para tal se embasam na adsortividade dos ânions no TiO2 e na reatividade dos respectivos traps formados. O mesmo modelo de ajuste matemático foi utilizado para avaliar a fotoatividade do eletrodo modificado pela sua irradiação sucessiva e repetida em HNO3 0,1 mol L-1 (sem EDTA), sendo observada redução significativa principalmente nos parâmetros relativos aos sítios de reação e, assim, sugere-se um impedimento dos mesmos através, p. ex., da formação de peróxidos superficiais. Na presença também de EDTA, a carga líquida total despendida na sua fotooxidação se mantém relativamente constante nas sucessivas irradiações. Por fim, os experimentos de fotooxidação do EDTA sob varredura de potencial revelaram uma região de relação linear entre a fotocorrente e o potencial aplicado ao eletrodo modificado com TiO2 que se estende até a região de saturação de fotocorrente ser atingida, comportamento compatível com filmes nanoparticulados porosos não-dopados. A inclinação da região linear aumenta em função da [EDTA], como se os valores de condutância (di/dE) se elevassem dependendo da reação interfacial. Ajuste de modelo matemático hiperbólico correlacionando a (foto)resistência do filme em função da fotocorrente de saturação R = R0 + kIsph1, fornece resistência ôhmica do filme R0 de 5,0 kΩ e uma constante atrelada ao fotopotencial de 237 mA Ω. Já a curva monotônica de fotocorrente de saturação (Isph) com a [EDTA] apresenta comportamento linear até cerca de 0,7 mmol L-1, sugerindo-se que nessa região o controle por transporte de massa é a etapa limitante do processo global. Acima dessa concentração o coeficiente angular diminui gradualmente à medida que a reação de cinética de captura das lacunas passa a ser o determinante até um limite máximo (aparentemente 5,0 mmol L-1 de EDTA, nas condições do experimento) onde a disponibilidade de lacunas fotogeradas passa a governar. / The lengthy thermal treatment is a common step during the preparation and immobilization of photocatalysers on substrates, which by the way, was overcome in this thesis by the investigation of two strategies of modification of gold electrodes with P25 TiO2. The first one consists in promoting the formation of a nanolayer by the simple exposure of the metal surface to an aqueous suspension of TiO2 (10 g L-1 on 0.1 mol L-1 HCl) during 1 min; the second involves the deposition of a small drop (5 or 8 L) of the suspension on the gold substrate (drop coating) and its drying by irradiation with an incandescent lamp (60 W at 20 cm far), with worthy results also for two or three deposited layers. The stability of this aqueous suspension was appreciably improved by the repulverization of commercial P25 in a grinding mortar. As a consequence the photocatalytic activity conferred to the electrode by the formation of the TiO2 nanofilm doubled. Such improvements cannot be attained by bath sonication of the suspension. The average particle size determined by DLS for the TiO2 dispersed in 0.1 mol L-1 HCl was 103±3 nm, while the film deposited on the surface of gold consisted of particles of 20 nmn (anatase) and 30 nm (rutile) characterized by TEM and barely achieved a thickness of 100 nm (characterized by SEM and EDS). The stability of the modifying suspension is susceptible to the type of anion of the electrolyte. Good results were found with 0.1 mol L-1 HCl and HClO4, but not with 0.1 mol L-1 H2SO4. This last medium causes fast sedimentation of TiO2 and generates electrodes with one tenth of the photoactivity achieved with the other acids. The effect of film thickness on the photoactivity was evaluated for films with 100 nm and 2.0 µm prepared from a 10 g L-1 TiO2 suspension by the contact and drop coating (5 µL) strategies, respectively. The electron transport across both films and the electrochemical response for the 1.0 mmol L-1 Fe(CN) 63- probe was compared. The formal net charge for the 1.0 mmol L-1 EDTA oxidation was only 50 % higher for the 20x thicker film that also considerably distorts the voltammetric waves of the aforementioned reversible probe. The effect of different supporting electrolytes (0.1 mol L-1 acids) on the anodic photooxidation processes in general was tested with electrodes modified by an optimized drop coating protocol (8.0 µL of 2 µg L-1 TiO2). The curve describing the photocurrent decay in function of time might be ascribed to an equation of double exponential decay iph = i0 + A1 exp(k1t) + A2 exp (k2t), which allows the distinction of the contribution of water oxidation (i0) from terms of two types of surface sites: a kinetically fast site and a slow one. The total initial photocurrent (iph0 total) of the following electrolytes decays in the order: HNO3 > HClO4 > HCl > H2SO4 > H3PO4; explanations comprise the adsorbability of each respective anion on TiO2 and the reactivity of the corresponding traps formed. Similar curve fitting applied to the data of photoactivity of the gold electrode during successive irradiations of its surface in 0.1 mol L-1 HNO3 (absence of EDTA) revealed that sites reactivities underwent considerable reduction. It is suggested that during repetitive experiments the sites are impaired by the formation of surface peroxides. However, in the presence of 1.0 mmol L-1 of EDTA, the formal net charge of oxidation of the organic species remains almost unaltered. Ultimately, the experiments concerning the photooxidation of EDTA under linear potential scan revealed a region of linear relation between the photocurrent and the potential applied to the electrode modified with a TiO2 film (nanometric or micrometric), which holds until the saturation photocurrent is attained. This behavior is typical for porous non-doped nanoparticulate electrodes. The slope of the linear region increase somewhat with the EDTA concentration, as though the conductance values (di/dE) were raised depending on the interfacial reaction rate. The fitting of a hyperbolic model R = R0 + kIsph-1 for the correlation of the (photo)resistence (R) of the film with the photocurrent of saturation (Isph) allows the estimation of an ohmic resistance of 5.0 kΩ, and a photopotential related constant of 237 mA Ω. The curve of correlation between Isph and the [EDTA] is linear fit until 0.7 mmol L-1, suggesting that in this initial region the mass transport to the interface is the limiting step of the global process. Above that concentration, the slope of the curve is gradually reduced as the kinetic of capture of the holes becomes the determining step and from 5.0 mmol L-1 on an asymptotic Isph is reached (under the conditions of the experiments), where the holes photogeneration might start governing.
|
3 |
Substitution of Catalytic Calcium to Divalent Metal Cations in Paraoxonase 1 (PON1): Implications for the Catalytic MechanismWang, Yu-Wen 28 September 2018 (has links)
No description available.
|
4 |
Polyamic acid composites for multiiple sensing applications in complex sample matricesHess, Euòdia Hallouise January 2013 (has links)
Philosophiae Doctor - PhD / Polyamic acid-polypyrrole (PAA/PPy) composite films were prepared and characterised for the use as conducting platforms in the design of biosensor systems. The thin films were synthesised by electrochemical method from a solution containing controlled molar ratio of chemically synthesised polyamic acid (PAA) and pyrrole monomer. Homogenous films were obtained incorporating PAA into electropolymerised polypyrrole (PPy) thin film. The concentration of PAA (1.37 × 10-6 M) was kept fixed throughout the composite ratio analysis, whilst the concentration of PPy was varied from 1.9 × 10-3 M to 9.9 × 10-3 M. The PAA/PPy
thin films were electrodeposited at a glassy carbon electrode (GCE) and characterised using Fourier Transform Infrared Spectroscopy (FTIR), Raman spectroscopy, Atomic Force microscopy (AFM), Scanning electron microscopy (SEM) and electrochemical (CV, SWV) techniques. The composition that best represented the homogenous incorporation of PAA into PPy matrix was observed at a PAA/PPy ratio of 1: 4.13 × 10-3. This composite was observed to have two sets of coupled peaks with formal potential 99 mV and 567 mV respectively. The
De determined from cyclic voltammetry using the anodic peak currents were found to be twice as high (5.82 × 10-4 cm2/s) as the De calculated using the cathodic peak currents (2.60 × 10-4 cm2/s), indicating that the composite favours anodic electron mobility. Surface morphology and spectroscopy data support the formation of a homogenous polymer blend at the synthesis ratio represented by composite 3. For the construction of a biosensor the spectroscopic and electrochemical properties of the enzyme, luciferase and the analytes i.e
naphthalene and fluoranthene were evaluated. Fluorescence spectroscopy studies were carried out to characterize the enzyme’s bioluminescence response in PBS at pH 7. Luciferase showed an absorption peak at 340 nm. The bioluminescence properties of the enzyme with the analytes were explored by fluorescence spectroscopy. The emmision peak at 340 nm gradually decreased as the concentration of each analyte was increased respectively.
|
5 |
Ramanova spektroskopie kapkově nanášených povlaků biologicky významných molekul / Drop coating deposition Raman spectroscopy of biologically important moleculesKuižová, Alžbeta January 2019 (has links)
Drop coating deposition Raman (DCDR) spectroscopy is a special method of Raman spectroscopy, which is based on the evaporation of solvent from a drop of solution or suspension on a hydrophobic surface. This typically leads to the formation of ring-shaped drying pattern, often called as "coffee ring". As a result a preconcentration of a material and higher intensity of Raman signal in comparison with Raman scattering from solution is obtained. In this work several hydrophobic surfaces with different roughness and hydrophobicity were compared: a smooth substrate with polytetrafluorethylen (pPTFE) coating and nanorough substrates where surface hydrophobicity was formed by deposited cupper or argent nanoparticles with different concentration. It was shown that for DPPC liposome suspension stronger preconcentration is obtained by means of a nanorough substrate. When different nanorough substrate compared, no better improvement was acquired. As for the drying of drops at different temperatures (from 15řC to 60řC) deposited on the smooth pPTFE substrate and the substrate with argent nanoparticles, it was observed that Raman spectra did not reveal any spectral changes corresponding to phase transition of lipid. In case of drying at temperatures higher than a temperature of the phase transition, non-homogeneities...
|
6 |
Diagnostika neurodegenerativních chorob pomocí Ramanovy spektroskopie / Diagnostics of neurodegenerative diseases by means of Raman spectroscopyKlener, Jakub January 2011 (has links)
Therapies of neurodegenerative diseases are often very difficult and their success depend on an early diagnose. From that reason we have been developing new diagnostic method for multiple sclerosis and Alzheimer disease by drop coating deposition Raman (DCDR) spectroscopy of cerebrospinal fluid (CSF) in this work. We found out conditions of measurements, where spectra were reproducible and accepted for standard diagnostic practices. We discovered that CSF has fast degradation at a room temperature, which was detectable in spectra after 5 hours, and degradation due to refreezing. DCDR spectra of CSF from individual patients were analyzed by factor and cluster analysis. Multiple sclerosis was manifested by lower intensity of a Raman band at 1080 cm−1 , which is probably connected with more general pathologic state. Spectral changes caused by Alzeheimer disease were more complex and beside changes mentioned above also changes connected with composition and conformation of proteins were identified in regions 1200-1800 cm−1 and 2870-2950 cm−1 . Additionally, we succeeded in distinguishing of young healthy patients from older patients in DCDR spectra. In this work were checked up, that DCDR is good diagnostic method for clinical practices for determining neurodegenerative diseases through the complex...
|
7 |
Advanced Applications of Raman Spectroscopy for Environmental AnalysesLahr, Rebecca Halvorson 09 January 2014 (has links)
Due to an ever-increasing global population and limited resource availability, there is a constant need for detection of both natural and anthropogenic hazards in water, air, food, and material goods. Traditionally a different instrument would be used to detect each class of contaminant, often after a concentration or separation protocol to extract the analyte from its matrix. Raman spectroscopy is unique in its ability to detect organic or inorganic, airborne or waterborne, and embedded or adsorbed analytes within environmental systems. This ability comes from the inherent abilities of the Raman spectrometer combined with concentration, separation, and signal enhancement provided by drop coating deposition Raman (DCDR) and surface-enhanced Raman spectroscopy (SERS).
Herein the capacity of DCDR to differentiate between cyanotoxin variants in aqueous solutions was demonstrated using principal component analysis (PCA) to statistically demonstrate spectral differentiation. A set of rules was outlined based on Raman peak ratios to allow an inexperienced user to determine the toxin variant identity from its Raman spectrum. DCDR was also employed for microcystin-LR (MC-LR) detection in environmental waters at environmentally relevant concentrations, after pre-concentration with solid-phase extraction (SPE). In a cellulose matrix, SERS and normal Raman spectral imaging revealed nanoparticle transport and deposition patterns, illustrating that nanoparticle surface coating dictated the observed transport properties. Both SERS spectral imaging and insight into analyte transport in wax-printed paper microfluidic channels will ultimately be useful for microfluidic paper-based analytical device (𝜇PAD) development. Within algal cells, SERS produced 3D cellular images in the presence of intracellularly biosynthesized gold nanoparticles (AuNP), documenting in detail the molecular vibrations of biomolecules at the AuNP surfaces. Molecules involved in nanoparticle biosynthesis were identified at AuNP surfaces within algal cells, thus aiding in mechanism elucidation.
The capabilities of Raman spectroscopy are endless, especially in light of SERS tag design, coordinating detection of analytes that do not inherently produce strong Raman vibrations. The increase in portable Raman spectrometer availability will only facilitate cheaper, more frequent application of Raman spectrometry both in the field and the lab. The tremendous detection power of the Raman spectrometer cannot be ignored. / Ph. D.
|
8 |
Cytochrome C biosensor for the determination of trace level arsenic and cyanide compoundsFuku, Xolile Godfrey January 2011 (has links)
In this work, an electrochemical method based on a cyt c biosensor has been developed, for the detection of selected arsenic and cyanide compounds. Boron Doped Diamond (BDD) electrode was used as a transducer, onto which cyt c was immobilised and used for direct determination of Prussian blue, potassium cyanide and arsenic trioxide by inhibition mechanism. The sensitivity as calculated from cyclic voltammetry (CV) and square wave voltammetry (SWV), for each analyte in phosphate buffer (pH= 7) was found to be (1.087- 4.488 Ã10-9 M) and the detection limits ranging from 0.0043- 9.1 μM. These values represent a big improvement over the current Environmental Protection Agency (EPA) and World Health Organisation (WHO) guidelines.
|
9 |
Cytochrome C biosensor for the determination of trace level arsenic and cyanide compoundsFuku, Xolile Godfrey January 2011 (has links)
In this work, an electrochemical method based on a cyt c biosensor has been developed, for the detection of selected arsenic and cyanide compounds. Boron Doped Diamond (BDD) electrode was used as a transducer, onto which cyt c was immobilised and used for direct determination of Prussian blue, potassium cyanide and arsenic trioxide by inhibition mechanism. The sensitivity as calculated from cyclic voltammetry (CV) and square wave voltammetry (SWV), for each analyte in phosphate buffer (pH= 7) was found to be (1.087- 4.488 Ã10-9 M) and the detection limits ranging from 0.0043- 9.1 μM. These values represent a big improvement over the current Environmental Protection Agency (EPA) and World Health Organisation (WHO) guidelines.
|
10 |
Cytochrome C biosensor for the determination of trace level arsenic and cyanide compoundsFuku, Xolile Godfrey January 2011 (has links)
Magister Scientiae - MSc / In this work, an electrochemical method based on a cyt c biosensor has been developed, for the detection of selected arsenic and cyanide compounds. Boron Doped Diamond (BDD) electrode was used as a transducer, onto which cyt c was immobilised and used for direct determination of Prussian blue, potassium cyanide and arsenic trioxide by inhibition mechanism. The sensitivity as calculated from cyclic voltammetry (CV) and square wave voltammetry (SWV), for each analyte in phosphate buffer (pH= 7) was found to be (1.087- 4.488 ×10-9 M) and the detection limits ranging from 0.0043- 9.1 μM. These values represent a big improvement over the current Environmental Protection Agency (EPA) and World Health Organisation (WHO) guidelines. / South Africa
|
Page generated in 0.085 seconds