Owing to the need of high-directivity radiation in fix-point communication, this thesis designs the metamaterial with 4-fold rotational symmetric unitcells. Using their nearing-zero refractive index along two polarizations, we can get gain-enhanced antenna radomes and place them above dual- and circular-polarized antenna to verify our idea. It is known that the group delay variation in a communication system causes the degradation of symbol error rate, and positive group delay (GD) causes delay in signal propagation. Therefore, this research studies the negative group delay (NGD) behavior of metamaterial. Through analyzing the GD of metamaterial equivalent circuit caused by poles and zeros, we design a novel NGD bandpass circuit. Furthermore, this thesis develops graphic method for group delay investigatiion and study the relationship between NGD, loss and gain in order to simplify the design of GD compensation circuit.

Yes / In this paper, we propose an eight-port/four-resonator slot antenna array with a dual-polarized function for multiple-input-multiple-output (MIMO) 5G mobile terminals. The design is composed of four dual-polarized square-ring slot radiators fed by pairs of microstrip-line structures. The radiation elements are designed to operate at 3.6 GHz and are located on the corners of the smartphone PCB. The squarering slot radiators provide good dual-polarization characteristic with similar performances in terms of fundamental radiation characteristics. In order to improve the isolation and also reduce the mutual coupling characteristic between the adjunct microstrip-line feeding ports of the dual-polarized radiators, a pair of circular-ring/open-ended parasitic structures is embedded across each square-ring slot radiator. The −10-dB impedance bandwidth of each antenna-element is 3.4–3.8 GHz. However, for −6-dB impedance bandwidth, this value is 600 MHz (3.3–3.9 GHz). The proposed MIMO antenna offers good S-parameters, high-gain radiation patterns, and sufficient total efficiencies, even though it is arranged on a high-loss FR-4 dielectric. The SAR function and the radiation characteristics of the proposed design in the vicinity of user-hand/userhead are studied. A prototype of the proposed smartphone antenna is fabricated, and good measurements are provided. The antenna provides good features with a potential application for use in the 5G mobile terminals. / This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424. / Research Development Fund Publication Prize Award winner, January 2019.

Yes / A novel dual-polarized patch antenna for ultra-wideband (UWB) applications is presented. The antenna consists of a square patch and four capacitively coupled feeds to enhance the impedance bandwidth. Each feed is formed by a vertical isosceles trapezoidal patch and a horizontal isosceles triangular patch. The four feeds are connected to the microstrip lines that are printed on the bottom layer of the grounded FR4 substrate. Two tapered baluns are utilized to excite the antenna to achieve high isolation between the ports and reduce the cross-polarization levels. In order to increase the antenna gain and reduce the backward radiation, a compact surface mounted cavity is integrated with the antenna. The antenna prototype has achieved an impedance bandwidth of 112% at (|S11| ≤ -10 dB) whereas the coupling between the two ports is below -28 dB across the operating frequency range. The measured antenna gain varies from 3.91 to 10.2 dBi for port 1 and from 3.38 to 9.21 dBi for port 2, with a 3-dB gain bandwidth of 107%. / IEEE Antennas and Propagation Society