Spelling suggestions: "subject:"diynamics amodeling"" "subject:"diynamics emodeling""
1 |
Contributions to the semi-classical signal analysis method: The arterial stiffness assessment case studyPiliouras, Evangelos 04 1900 (has links)
Semi-classical signal analysis (SCSA) is a signal representation framework based on quantum mechanics principles and the inverse scattering transform. The signal of interest is decom- posed in a linear combination of the Schrodinger operator squared eigenfunctions, influenced by the semi-classical parameter. The framework has been utilized in several applications, in virtue of the adaptivity and localization of its components. In this thesis, we expand two direc- tions. From the theoretical perspective, up to date, the semi-classical parameter was selected in an error minimization context or a representation sparsity requirement. The framework is reinforced by providing the interval of this parameter, where a proper representation can be obtained. The lower bound is inspired by the semi-classical approximation and the sampling theorem, while the upper bound is based on the quantum perturbation theory. Such an interval defines the sampling theorem of the framework. Based on existing properties, we propose a non-uniform sampling of the semi-classical parameter, which can significantly increase the speed of convergence with minimal accuracy error. An immediate representation is also in- vestigated by providing an alternative convergence criterion drawn from signal features. Such criterion paves the way to a calculus-based parameter definition and extension to a filtering scenario. The semi-classical parameter exerts a strong influence on the SCSA components. Each component can be viewed as a soliton, a wave whose amplitude determines its width and velocity. In parallel, there exist arterial dynamics models where the solitons are solu- tions of the describing equations. We therefore propose that the soliton propagation velocity extracted from the algorithm is correlated with the pulse wave velocity, which is the blood
pressure propagation velocity in the systolic phase. The velocity in the carotid-femoral seg-
ment is considered the golden-standard to indicate cardiovascular risk. We therefore turn our attention to validate such a model and utilize it for arterial stiffness assessment. The model was validated based on an in-silico database fostering more than 3000 subjects. This SCSA-based model is proposed to be integrated into existing methods, where its calibration can yield single-point continuous velocity measurements.
|
2 |
Assessment of Dynamic Maintenance ManagementKothari, Vishal Pratap 17 January 2005 (has links)
Today's technological systems are expected to perform at very high standards throughout their operational phase. The cost associated with unavailability of these systems is very high and especially with the defense systems or medical equipment which can directly affect human lives. The maintenance system plays an important role in achieving higher performance targets. In order to manage maintenance activities in more informed and rational manner, it is very important to understand the inherently complex and dynamic structure of the system. Traditionally maintenance policies are derived from reliability characteristics of individual components or sub-systems. This research makes an attempt to understand the system from the forest level and suggest better maintenance policies for achieving higher availability and lower system degradation. The leverage is gained from System Dynamics framework's ability to model complex systems and capture various feedback loops. The simulation results reveal that with the limited preventive maintenance capacity and within the given assumptions of the model, there exists and optimal preventive maintenance interval which is not the minimum. The simulation results also reflect that frequent preventive maintenance is required at higher load factors. / Master of Science
|
3 |
A System Dynamics Model of the Development of New Technologies for Ship SystemsMonga, Pavinder 10 October 2001 (has links)
System Dynamics has been applied to various fields in the natural and social sciences. There still remain countless problems and issues where understanding is lacking and the dominant theories are event-oriented rather than dynamic in nature. One such research area is the application of the traditional systems engineering process in new technology development. The Navy has been experiencing large cost overruns in projects dealing with the implementation of new technologies on complex ship systems. We believe that there is a lack of understanding of the dynamic nature of the technology development process undertaken by aircraft-carrier builders and planners. Our research effort is to better understand the dynamics prevalent in the new technology development process and we use a dynamic modeling technique, namely, System Dynamics in our study.
We provide a comprehensive knowledge elicitation process in which members from the Newport News Shipbuilding, the Naval Sea Command Cost Estimating Group, and the Virginia Tech System Performance Laboratory take part in a group model building exercise. We build a System Dynamics model based on the information and data obtained from the experts. Our investigation of the dynamics yields two dominant behaviors that characterize the technology development process. These two dynamic behaviors are damped oscillation and goal seeking. Furthermore, we propose and investigate four dynamic hypotheses in the system. For the current structure of the model, we see that an increase in the complexity of new technologies leads to an increase in the total costs, whereas a increase in the technology maturity leads to a decrease in the total costs in the technology development process. Another interesting insight is that an increase in training leads to a decrease in total costs. / Master of Science
|
4 |
Design and optimization of the ECOSat satellite requirements and integration: a trade study analysis of vibrational, thermal, and integration constraintsCurran, Justin Thomas 06 January 2015 (has links)
This thesis presents the design of a working and testable satellite with particular emphasis on the electrical, mechanical, and thermal modelling and performance issues for the ECOSat project in the framework of the Canadian Satellite Design Competition.
In order of importance, based on the design challenges for the satellite structure were the dynamics modelling and analysis, thermal modeling and analysis, and assembly and integration modeling. Both the dynamics and thermal modeling of the satellite were completed using Finite Element Analysis (FEA) in NX with the NASTRAN solver.
The dynamic analysis study was performed first since it has the primary design driver for the structure. These frequencies are of concern due to the 90 Hz or greater fundamental frequency requirement for each axis. The dynamic modes of the satellite structure had the largest influence not only on the design of the structure but also its interface to the electronic systems as these had to meet the required testing qualification levels. It was found that the first fundamental frequency appeared near 200 Hz in the XY plane of the structure.
The second study performed was on the thermal modeling of the satellite both for extreme operating conditions in “Hot” and “Cold” cases. Operational limiting cases were identified for the batteries in the cold and hot case study, and the power amplifier for the transmitter was identified for the hot case study. For the batteries to perform satisfactorily for the cold and hot case problem, a metal bracket with an electric heater was added to the design. The heaters were added to the design as a resistive heating element, the additional thermal coupling from the bracket improved heat transfer during the hot case. A trade study analysis was conducted for the power amplifier. Here, a bi directional heat spreader made of pyrolytic graphite attached to a frame member with high thermal inertia was chosen as the optimal solution.
Finally, the third study performed tested the interface and clearance requirements of the satellite. The synergistic integration of the electrical and mechanical systems required significant attention in order to ensure the successful assembly, integration, and testing of the two systems. The investigation focused on the cabling assemblies of the satellite. Several design iterations were required for the power regulation, transmitter, receiver, modem, and onboard computer systems. Detailed assembly drawings were created for the cabling assembly fabrication prior to the final integration of the electrical and mechanical systems.
The performance simulations show that the satellite systems meet or exceed the required launch qualification tests as well as the thermal cycling requirements for all systems and their components to operate within the manufacturer specified values. Once completely assembled and launched into orbit, the satellite should be able to perform and within its operational and mission requirements in both a sun synchronous or polar orbit at a range of altitudes. / Graduate / 0538 / 0544 / 0548 / jtcurran@uvic.ca
|
5 |
Dust Transportation and Settling within the Mine Ventilation NetworkKumar, Anand 01 January 2019 (has links)
Dust is ubiquitous in underground mine activities. Continuous inhalation of dust could lead to irreversible occupational diseases. Dust particles of size lower than 75.0 µm, also known as float coal dust, can trigger a coal dust explosion following a methane ignition. Ventilation air carries the float coal dust from the point of production to some distance before it’s deposited on the surfaces of underground coal mine. Sources of dust are widely studied, but study of dust transportation has been mainly based on experimental data and simplified models. An understanding of dust transportation in the mine airways is instrumental in the implementation of local dust control strategies.
This thesis presents techniques for sampling float coal dust, computational fluid dynamics (CFD) analysis, and mathematical modeling to estimate average dust deposition in an underground coal mine. Dust samples were taken from roof, ribs, and floor at multiple areas along single air splits from longwall and room and pillar mines. Thermogravimetric analysis of these samples showed no conclusive trends in float coal dust deposition rate with location and origin of dust source within the mine network. CFD models were developed using the Lagrangian particle tracking approach to model dust transportation in reduced scale model of mine. Three dimensional CFD analysis showed random deposition pattern of particle on the mine model floor. A pseudo 2D model was generated to approximate the distance dust particles travel when released from a 7 ft. high coal seam. The models showed that lighter particles released in a high airflow field travel farthest. NIOSH developed MFIRE software was adopted to simulate dust transportation in a mine airway analogous to fume migration. The simulations from MFIRE can be calibrated using the dust sampling results to estimate dust transportation in the ventilation network.
|
6 |
The impacts of climate change on cattle water demand and supply in Khurutshe, BotswanaMasike, Sennye January 2007 (has links)
The primary question that the thesis investigates is: what impacts could climate change have on cattle water demand and supply in Khurutshe, Botswana. This thesis is pursued in light of the fact that there is a lack of knowledge on climate change and cattle water demand and supply. Thus, this thesis aims at filling the gap in knowledge on climate change and cattle water resources in Botswana and other semi-arid environments. A cattle water demand and supply model is developed to investigate the primary question of the thesis. The model is driven by rainfall and temperature over time as these variables largely determine cattle water supply and demand, respectively. Climate scenarios for 2050 are constructed using SimCLIM (developed by the International Global Change Institute of the University of Waikato) based on HadCM3 and CSIRO Mk2 General Circulation Models (GCMs). Three Special Report on Emission Scenarios (SRES) are used: A1B, A1FT and A1T. These emission scenarios were selected based on their coverage for possible future Greenhouse Gas emissions (GHG). Climate scenarios show that by 2050 the temperature for the Khurutshe area could increase by as much as 3 oC depending on the GCM and SRES emission scenario and that there could be a decline in rainfall of up to 14% per month. CSIRO Mk2 displayed the maximum decline in rainfall while HadCM3 depicted the maximum increase in temperature. The model is implemented in the Khurutshe of the Kgatleng District, Botswana. The results reported are for Masama Ranch and also for the whole of the Khurutshe area. The results show that climate change could lead to an annual increase of more than 20% in cattle water demand by 2050 due to an increase in temperature. In addition, climate change could lead to a decline in the contribution of surface pan water to cattle water supply. Overall, there could be an increase in abstraction of groundwater for cattle by 2050 due to an increase in demand and a decline in forage water content and surface pan water. Observations in semi-arid environments of Africa indicate that farmers encounter problems of declining borehole yields and local depletion in groundwater in summer and drought years when demand peaks. In addition, it has been observed that during drought more cattle are lost as a result of lack of water, particularly for those whose cattle are reliant on surface water. Thus, the results from this study indicate that climate change could enhance this problem. In the thesis I have shown the importance of integrating climate change impacts on water demand and supply when assessing water resources, which has been ignored in the past. Some of the policy options that are discussed are tradable pumping permits for controlling abstraction and allocation issues in the Khurutshe aquifer and, controlling stocking numbers. This is in recognition of the fact that climate change could result in more reliance on groundwater for both cattle farming and urban water supply hence compromising sustainability and allocation issues especially for the Khurutshe aquifer which is earmarked to supply the city of Gaborone and surrounding villages in drought periods.
|
7 |
The impacts of climate change on cattle water demand and supply in Khurutshe, BotswanaMasike, Sennye January 2007 (has links)
The primary question that the thesis investigates is: what impacts could climate change have on cattle water demand and supply in Khurutshe, Botswana. This thesis is pursued in light of the fact that there is a lack of knowledge on climate change and cattle water demand and supply. Thus, this thesis aims at filling the gap in knowledge on climate change and cattle water resources in Botswana and other semi-arid environments. A cattle water demand and supply model is developed to investigate the primary question of the thesis. The model is driven by rainfall and temperature over time as these variables largely determine cattle water supply and demand, respectively. Climate scenarios for 2050 are constructed using SimCLIM (developed by the International Global Change Institute of the University of Waikato) based on HadCM3 and CSIRO Mk2 General Circulation Models (GCMs). Three Special Report on Emission Scenarios (SRES) are used: A1B, A1FT and A1T. These emission scenarios were selected based on their coverage for possible future Greenhouse Gas emissions (GHG). Climate scenarios show that by 2050 the temperature for the Khurutshe area could increase by as much as 3 oC depending on the GCM and SRES emission scenario and that there could be a decline in rainfall of up to 14% per month. CSIRO Mk2 displayed the maximum decline in rainfall while HadCM3 depicted the maximum increase in temperature. The model is implemented in the Khurutshe of the Kgatleng District, Botswana. The results reported are for Masama Ranch and also for the whole of the Khurutshe area. The results show that climate change could lead to an annual increase of more than 20% in cattle water demand by 2050 due to an increase in temperature. In addition, climate change could lead to a decline in the contribution of surface pan water to cattle water supply. Overall, there could be an increase in abstraction of groundwater for cattle by 2050 due to an increase in demand and a decline in forage water content and surface pan water. Observations in semi-arid environments of Africa indicate that farmers encounter problems of declining borehole yields and local depletion in groundwater in summer and drought years when demand peaks. In addition, it has been observed that during drought more cattle are lost as a result of lack of water, particularly for those whose cattle are reliant on surface water. Thus, the results from this study indicate that climate change could enhance this problem. In the thesis I have shown the importance of integrating climate change impacts on water demand and supply when assessing water resources, which has been ignored in the past. Some of the policy options that are discussed are tradable pumping permits for controlling abstraction and allocation issues in the Khurutshe aquifer and, controlling stocking numbers. This is in recognition of the fact that climate change could result in more reliance on groundwater for both cattle farming and urban water supply hence compromising sustainability and allocation issues especially for the Khurutshe aquifer which is earmarked to supply the city of Gaborone and surrounding villages in drought periods.
|
8 |
Modeling of the piezoelectric-driven stick-slip actuatorsKang, Dong 23 November 2007
Previous studies show that the Piezoelectric-Driven Stick-Slip (PDSS) actuator is a promising device in many micropositioning and micromanipulation applications, where positioning with a long range and a high resolution is required. However, research in this area is still in its early stage and many issues remain to be addressed. One key issue is the representation of the dynamic displacement of the end-effector. It is known that such factors as the dynamics of piezoelectric actuator (PEA) and the presliding friction involved can significantly contribute to the displacement dynamics. Although this has been widely accepted, specific quantitative relationship between the aforementioned factors and the displacement dynamics has rarely been defined. The aim of this research is to develop a model to represent the displacement of the end-effecter of the PDSS actuators, in which both the presliding friction and the PEA dynamics are addressed. <p>In order to represent the presliding friction, the models reported in literatures, including Dahl model [Olsson, et al., 1998], Reset Integrator model [Haessig and Friedland 1991], LuGre model [Canudas de Wit et al., 1995] and Elastoplastic model [Dupont et al., 2002] were reviewed and examined; and the LuGre model was chosen to be used because of its efficiency and simple formulation. On the other hand, a linear second order dynamic system model was employed to represent the combination of a PEA and its driven mechanism. On the basis of the pre-sliding friction model and the linearized PEA dynamics model, a model representative of the end-effector displacement of the PDSS actuator model was developed. <p>In order to validate experimentally the developed PDSS model, a displacement measuring and data acquisition experiment system was established and a prototype was developed based on dSPACE and Simulink. On the prototyped actuator, two experiments were designed and conducted to identify the parameters involved in the model. One experiment is for the determination of the parameters of the second order system for the dynamics of the combination of a PEA and its driven mechanism; and other one is for the determination of the parameters of the chosen friction model. The identified parameters were then employed in the developed PDSS model to simulate the displacements and the results were compared with the experimental results that were obtained under the same operating conditions as the simulation. The comparison suggests that the model developed in this study is promising for the end-effector displacement of the PDSS actuator.
|
9 |
Modeling of the piezoelectric-driven stick-slip actuatorsKang, Dong 23 November 2007 (has links)
Previous studies show that the Piezoelectric-Driven Stick-Slip (PDSS) actuator is a promising device in many micropositioning and micromanipulation applications, where positioning with a long range and a high resolution is required. However, research in this area is still in its early stage and many issues remain to be addressed. One key issue is the representation of the dynamic displacement of the end-effector. It is known that such factors as the dynamics of piezoelectric actuator (PEA) and the presliding friction involved can significantly contribute to the displacement dynamics. Although this has been widely accepted, specific quantitative relationship between the aforementioned factors and the displacement dynamics has rarely been defined. The aim of this research is to develop a model to represent the displacement of the end-effecter of the PDSS actuators, in which both the presliding friction and the PEA dynamics are addressed. <p>In order to represent the presliding friction, the models reported in literatures, including Dahl model [Olsson, et al., 1998], Reset Integrator model [Haessig and Friedland 1991], LuGre model [Canudas de Wit et al., 1995] and Elastoplastic model [Dupont et al., 2002] were reviewed and examined; and the LuGre model was chosen to be used because of its efficiency and simple formulation. On the other hand, a linear second order dynamic system model was employed to represent the combination of a PEA and its driven mechanism. On the basis of the pre-sliding friction model and the linearized PEA dynamics model, a model representative of the end-effector displacement of the PDSS actuator model was developed. <p>In order to validate experimentally the developed PDSS model, a displacement measuring and data acquisition experiment system was established and a prototype was developed based on dSPACE and Simulink. On the prototyped actuator, two experiments were designed and conducted to identify the parameters involved in the model. One experiment is for the determination of the parameters of the second order system for the dynamics of the combination of a PEA and its driven mechanism; and other one is for the determination of the parameters of the chosen friction model. The identified parameters were then employed in the developed PDSS model to simulate the displacements and the results were compared with the experimental results that were obtained under the same operating conditions as the simulation. The comparison suggests that the model developed in this study is promising for the end-effector displacement of the PDSS actuator.
|
10 |
Nonlinear orbit uncertainty prediction and rectification for space situational awarenessDeMars, Kyle Jordan 07 February 2011 (has links)
A new method for predicting the uncertainty in a nonlinear dynamical system is developed and analyzed in the context of uncertainty evolution for resident space objects (RSOs) in the near-geosynchronous orbit regime under the influence of central body gravitational acceleration, third body perturbations, and attitude-dependent solar radiation pressure (SRP) accelerations and torques. The new method, termed the splitting Gaussian mixture unscented Kalman filter (SGMUKF), exploits properties of the differential entropy or Renyi entropy for a linearized dynamical system to determine when a higher-order prediction of uncertainty reaches a level of disagreement
with a first-order prediction, and then applies a multivariate Gaussian splitting algorithm to reduce the impact of induced nonlinearity. In order to address the relative accuracy of the new method with respect to the more traditional approaches of the extended Kalman filter (EKF) and unscented Kalman filter (UKF), several concepts regarding the comparison of probability density functions (pdfs) are introduced and
utilized in the analysis.
The research also describes high-fidelity modeling of the nonlinear dynamical system which drives the motion of an RSO, and includes models for evaluation of the central body gravitational acceleration, the gravitational acceleration due to other celestial bodies, and attitude-dependent SRP accelerations and torques when
employing a macro plate model of an RSO. Furthermore, a high-fidelity model of the measurement of the line-of-sight of a spacecraft from a ground station is presented,
which applies light-time and stellar aberration corrections, and accounts for observer and target lighting conditions, as well as for the sensor field of view.
The developed algorithms are applied to the problem of forward predicting the time evolution of the region of uncertainty for RSO tracking, and uncertainty rectification via the fusion of incoming measurement data with prior knowledge. It is demonstrated that the SGMUKF method is significantly better able to forward predict the region of uncertainty and is subsequently better able to utilize new measurement data. / text
|
Page generated in 0.0519 seconds