Without a doubt, there is a consensus around the international community which suggests that our current way of life is unsustainable for a healthy planet, society and economy. One focal point that should be taken deeply into consideration is the steel industry as, globally, it accounts for 8% of global emissions. Thus, there is a dire need to incorporate drastic measures, if one wishes to reach net-zero emissions by 2050, in accordance with the Paris Agreement of 2015. Electric Arc Furnaces are seeing a rapid implementation in the steel industry. However, at 0.5 tonnes of CO2 emitted per tonne of liquid steel produced, this emissions rating is still significant considering the amount of steel being produced annually. Additionally, these furnaces emit off-gases which must be treated from the dust. This leaves operators with a conundrum as the dust content compromises the use of waste heat recovery boilers for energy recovery, due to constant breakdowns. Therefore, this study aims to analyse the feasibility of using bioenergy and carbon capture and utilisation (CCU) concepts to capitalise on the high off-gas energy and emissions content to remedy the dust issue, whilst producing higher value products. The proposed concept evaluates the effectiveness of using the off-gas as the energy carrier and feed-stock for a biogasificaiton unit. Three different cases based on different EAF off-gas compositions have been investigated. Case 1 suggested that the off-gas composition is very CO2-heavy, whichled to investigating the option of adopting a CO2 biogasification concept to directly use the CO2. Case 1 performed the best in terms of CO2 utilisation efficiency; being 0.293. The system energy utilisation also noted that 49.3% of the inlet streams energy was transferred to the desired product. On a broader picture, this means that around 11% of the total energy coming out of the EAF would be utilised in producing a value-added product in the form of syngas. This contrasts with allowing around 33% of the energy in the EAF either being completely dissipated to the environment or converting it into electricity via waste heat recovery. The following two cases, Case 2 and 3, indicate EAF off-gas composition containing 72% and 40% nitrogen respectively. For Cases 2 and 3, a steam biogasification process was integrated which did not yield positive results for CO2 utilisation, since is a more promising gasifying agent. In addition, significant energy from EAF off-gas is used in raising the temperature of steam to the design temperature of the gasifier. However, although the CO2 was not directly used in this part of the process, it allows for other opportunities of process integration, for example the reverse water-gas shift step.

Utsläppen av växthusgaser ökar över hela världen och nya tekniker används för att minska utsläppen. 7% av utsläppen kommer från stålsektorn. 25% av världens stålproduktion görs via återvinningstekniken ljusbågsugn. Genom återvinningsprocessen släpps det ut 500kg CO2 per ton producerat flytande stål. En möjlighet att sänka dessa direkta utsläppär att koppla ljusbågsugnsprocessen med biomassa förgasnings och koldioxidavskiljning. Den föreslagna lösningen i denna avhandling är att utnyttja avgaserna från stålsmältningen i förgasningsprocessen och skapa värdefulla produkter. Projektet utvärderar den tekniska genomförbarheten i form av energieffektivitet och kolutnyttjande. Den föreslagna processen simulerades med Aspen Plus. Ett problem med ljusbågsugnens avgaser är fluktuationen i sammansättningen. Tre fall avavgassammansättning undersöktes. Fall 1 var den genomsnittliga avgassammansättningen, medan fall 2 och 3 var extrema med högt CO- respektive CO2-innehåll. Resultatet visade att syntetsgassammansättningen starkt beror på förgasningsmedlet. I samtliga fall ökade energieffektiviteten och de direkta utsläppen minskade, jämfört med nuvarande process. Fall 1 visade generellt högst effektivitet och kolutnyttjande, medan det CO2 rika fallet (fall 3) hade lägst. Ett kontinuerligt flöde av förgasningsmedel krävs för att driva förgasningsprocessen. Eftersom ljusbågsugn är en satsvis process, sker luftförgasning när avgaser inte är tillgängliga. Det önskade resultatet av luftförgasning är att producera syntetsgas som liknar avgasförgasningens syntesgas. Resultaten visade att luftinfiltration i avgaser är gynnsamt för mer liknande syntesgas . / Greenhouse gas emissions are increasing worldwide, and new techniques are being adopted to suppress the emissions. The steel sector is responsible for 7% of the emissions. 25% ofthe world’s steel production is made through the recycling technique EAF. Throughout the recycling process, 500 kg CO2 gets emitted per ton of liquid steel produced. An opportunity to lower these direct emissions is to couple the EAF process to biomass gasification and CO2 utilisation process. The proposed solution in this thesis is to utilise the off-gases in the gasification process and create high-valuable products. The project evaluates the technical feasibility via energy efficiency and carbon utilisation. The proposed process was simulated using Aspen Plus. A problem with the off-gases from EAF gasification is the fluctuation in composition. Three cases of off-gas composition were therefore investigated. Case 1 was the average off-gas composition, while cases 2 and 3 were extreme with high CO and CO2 content, respectively. The result showed that the syngas composition strongly depends on the gasifying agent. In all cases, the energy efficiency increased, and the direct emissions decreased. Case 1 generally showed the highest efficiency and carbon utilisation, while the CO2 heavily case (case 3) had the lowest. A continuous flow of gasifying agents is required to run the gasification process. Since EAF is a batch process, air gasification runs when off-gases are unavailable. The desired outcome of air gasification is to produce syngas similar to off-gas gasification. The results showed that air infiltration in off-gases is favourable for more similar syngas composition.