No description available.

No description available.

Mass spectrometry has become an important tool for analysis of protein complexes. This study utilizes electrospray ionization (ESI) coupled to a Fourier transform ion cyclotron resonance mass spectrometer (FTICR-MS) to analyze noncovalent complexes in the gas phase. Binding of cucurbit[7]uril (CB7) to intact bovine insulin and the B-chain of insulin was investigated. Competition experiments involving the B-chain and a mutant B-chain were performed to probe the solution-phase binding site. Electron capture dissociation (ECD) of CB7 complexed to intact insulin and to the B-chain, produced a series of peptidic fragments of insulin in complex with CB7. Analysis of these fragments allowed the determination of the apparent gas-phase binding site, which appears different than the proposed solution-phase binding-site. These studies thus suggest that CB7 migrates when the complex is transferred from solution to gas phase. The results of this study caution against using ECD-MS as a stand-alone structural probe of solutionphase binding.

Mass spectrometry has become an important tool for analysis of protein complexes. This study utilizes electrospray ionization (ESI) coupled to a Fourier transform ion cyclotron resonance mass spectrometer (FTICR-MS) to analyze noncovalent complexes in the gas phase. Binding of cucurbit[7]uril (CB7) to intact bovine insulin and the B-chain of insulin was investigated. Competition experiments involving the B-chain and a mutant B-chain were performed to probe the solution-phase binding site. Electron capture dissociation (ECD) of CB7 complexed to intact insulin and to the B-chain, produced a series of peptidic fragments of insulin in complex with CB7. Analysis of these fragments allowed the determination of the apparent gas-phase binding site, which appears different than the proposed solution-phase binding-site. These studies thus suggest that CB7 migrates when the complex is transferred from solution to gas phase. The results of this study caution against using ECD-MS as a stand-alone structural probe of solutionphase binding.

No description available.

In thin film fabrication, growth of high quality thin films with reproducibile properties is one of the main challenges. In order to achieve this goal, the influnce of the deposition system control parameters on film properties must be studied. This can be a complex process since many parameters may need to be considered. In this thesis, the electron beam evaporation of thin aluminum oxide films was investigated. Films were deposited with and without oxygen supply in the chamber, and at various ebeam source settings. A Varialble Angle Spectroscopic Ellipsometry system was used to characterize the films. Refractive index, which depends on material density and stoichiometry, was used as the figure of merit. It was observed that refractive index increases with deposition rate. Refractive index also changes with oxygen pressure and upon exposure to air. Various models to explain this behaviour are proposed and discussed. / Materials Engineering

Organic solar cells using carbon based materials have the potential to deliver cheap solar electricity. The aim is to be able to produce solar cells with common printing techniques on flexible substrates, and as organic materials can be made soluble in various solvents, they are well adapted to such techniques. There is a large variation of organic materials produced for solar cells, both small molecules and polymers. Alterations of the molecular structure induce changes of the electrical and optical properties, such as band gap, mobility and light absorption. During the development of organic solar cells, the step of mixing of an electron donor and an electron acceptor caused a leap in power conversion efficiency improvement, due to an enhanced exciton dissociation rate. Top performing organic solar cells now exhibit a power conversion efficiency of over 10%. Currently, a mix of a conjugated polymer, or smaller molecule, and a fullerene derivative are commonly used as electron donor and acceptor. Here, the blend morphology plays an important role. Excitons formed in either of the donor or acceptor phase need to diffuse to the vicinity of the donor-acceptor interface to efficiently dissociate. Exciton diffusion lengths in organic materials are usually in the order of 5-10 nm, so the phases should not be much larger than this, for good exciton quenching. These charges must also be extracted, which implies that a network connected to the electrodes is needed. Consequently, a balance of these demands is important for the production of efficient organic solar cells. Morphology has been found to have a significant impact on the solar cell behaviour and has thus been widely studied. The aim of this work has been to visualize the morphology of active layers of organic solar cells in three dimensions by the use of electron tomography. The technique has been applied to materials consisting of conjugated polymers blended with fullerene derivatives. Though the contrast in these blends is poor, three-dimensional reconstructions have been produced, showing the phase formation in three dimensions at the scale of a few nanometres. Several material systems have been investigated and preparation techniques compared. Even if excitons are readily dissociated and paths for charge extraction exist, the low charge mobilities of many materials put a limit on film thickness. Although more light could be absorbed by increased film thickness, performance is hampered due to increased charge recombination. A large amount of light is thus reflected and not used for energy conversion. Much work has been put into increasing the light absorption without hampering the solar cell performance. Aside from improved material properties, various light trapping techniques have been studied. The aim is here to increase the optical path length in the active layer, and in this way improve the absorption without enhanced extinction coefficient. At much larger dimensions, light trapping in solar cells with folded configuration has been studied by the use of optical modelling. An advantage of these V-cells is that two materials with complementing optical properties may be used together to form a tandem solar cell, which may be connected in either serial or parallel configuration, with maintained light trapping feature. In this work optical absorption in V-cells has been modelled and compared to that of planar ones.

This thesis quantitatively investigates gaseous electron-ion recombination in an environmental scanning electron microscope (ESEM) at a transient level by utilizing the dark shadows/streaks seen in gaseous secondary electron detector (GSED) images immediately after a region of enhanced secondary electron (SE) emission is encountered by a scanning electron beam. The investigation firstly derives a theoretical model of gaseous electron-ion recombination that takes into consideration transients caused by the time constant of the GSED electronics and external circuitry used to generate images. Experimental data of pixel intensity versus time of the streaks is then simulated using the model enabling the relative magnitudes of (i) ionization and recombination rates, (ii) recombination coefficients, and (iii) electron drift velocities, as well as absolute values of the total time constant of the detection system, to be determined as a function of microscope operating parameters. Results reveal the exact dependence that the effects of SE-ion recombination on signal formation have on reduced electric field intensity and time in ESEM. Furthermore, the model implicitly demonstrates that signal loss as a consequence of field retardation due to ion space charges, although obviously present, is not the foremost phenomenon causing streaking in images, as previously thought. Following that the generation and detection of gaseous scintillation and electro- luminescence produced via electron-gas molecule excitation reactions in ESEM is investigated. Here a novel gaseous scintillation detection (GSD) system is developed to efficiently detect photons produced. Images acquired using GSD are compared to those obtained using conventional GSED detection, and demonstrate that images rich in SE contrast can be achieved using such systems. A theoretical model is developed that describes the generation of photon signals by cascading SEs, high energy backscattered electrons (BSEs) and primary beam electrons (PEs). Photon amplification, or the total number of photons produced per sample emissive electron, is then investigated, and compared to conventional electronic amplification, over a wide range of microscope operating parameters, imaging gases and photon collection geometries. The main findings of the investigation revealed that detected electroluminescent signals exhibit larger SE signal-to-background levels than that of conventional electronic signals detected via GSED. Also, dragging the electron cascade towards the light pipe assemblage of GSD systems, or electrostatic focusing, dramatically increases photon collection efficiencies. The attainment of such an improvement being a direct consequence of increasing the `effective' solid angle for photon collection. Finally, in attempt to characterize the scintillating wavelengths arising from sample emissive SEs, PEs, BSEs, and their respective cascaded electrons, such that future photon filtering techniques can be employed to extract nominated GSD imaging signals, the emission spectra of commonly utilized electroluminescent gases in ESEM, such as argon (Ar) and nitrogen (N2), were collected and investigated. Spectra of Ar and N2 reveal several major emission lines that occur in the ultraviolet (UV) to near infrared (NIR) regions of the electromagnetic spectrum. The major photon emissions discovered in Ar are attributed to occur via atomic de-excitation transitions of neutral Ar (Ar I), whilst for N2, major emissions are attributed to be a consequence of second positive band vibrational de-excitation reactions. Major wavelength intensity versus gas pressure data, for both Ar and N2, illustrate that wavelength intensities increase with decreasing pressure. This phenomenon strongly suggesting that quenching effects and reductions in excitation mean free paths increase with imaging gas pressure.

Errata has been inserted on p. 136 and 162. / Bibliography: p. 263-280. / xxiii, 280 p. : ill. ; 30 cm. / Title page, contents and abstract only. The complete thesis in print form is available from the University Library. / Presents the results of two investigations into the characteristics of electron beams for application in radiation therapy. / Thesis (Ph.D.)--University of Adelaide, Dept. of Physics and Mathematical Physics, 1997?

Includes bibliographical references (8 p.) / ix, 173, [8] p. : ill. ; 30 cm. / Title page, contents and abstract only. The complete thesis in print form is available from the University Library. / Examines some of the consequences of the acceleration and production, and propagation, of high energy electrons and positrons in the Galaxy. In particular, predictions are made of the diffuse photon signals arising from the interactions of electrons and positrons with gas, low energy photons, and the galactic magnetic field during their transport in the Galaxy. / Thesis (Ph.D.)--University of Adelaide, Dept. of Physics and Mathematical Physics, 1999