This thesis describes the design of a board-level testing platform for monitoring and driving a selected set of interfaces used in space applications. The requirements of these devices are based on the corresponding ECSS, IEEE, and TIA standards described in the theoretical part of this thesis. The designed testing device is controlled by the Xilinx Zynq-7000 system-on-chip and is connected to a control PC via an Ethernet connection. The hardware, designed on a schematic level is responsible for meeting the standards' requirements. The software part consists of a Python module for the control PC providing a set of functions to be used in the testing process and a C application for the embedded ARM processor that forwards the data through the AXI interface to the interface drivers in the programmable logic.

This diploma thesis deals with the evaluation of a security solution that was recently deployed by a British company renting office space. This validation system is based on a database of MAC addresses, a database of clients and active filtering of connected devices. The first part explains the concepts of computer network, VLAN and basic concepts needed to understand the function of dynamic assignment of VLAN and IP addresses. The second part is devoted to measurements based on hypotheses, according to which measures are proposed in the last part to solve these security problems.

This work deals with the design and realization of a modular security central unit's hardware positioned in familial houses. As an operating component of the central unit is used Module Rabbit 3365 with an integrated Ethernet interface. Based on user's requirements and general requirements for electronic security system, circuit diagrams of the central unit's motherboard and power supply with a function of backup power supply are designed. The work also includes layout of a keyboard and LCD display. Printed circuit boards are designed, produced and assembled. The device is set to work. The last part concerns programming of the module Rabbit 3365 in Dynamic C. Gradually, set of operating functions for individual components of the security central unit are implemented.

Project is target on design and realisation of device for control of central ventilation and air distribution. Control unit evaluates air quality in habitable rooms and assure automatic air change. System is driven by microprocessors and uses electronically controlled valves and ventilator regulation. Project is focused on evaluation of carbon dioxide concentration and detection of fire in rooms. Control unit cooperate and communicate via data bus with already designated control unit of hot water heating. Whole unit can be easing connected to the PC using ethernet.

This Master´s thesis provides an overview of wired networks, its parameters, used standards and the deployment possibilities. Moreover, it includes the overall overview about optical networks, its parameters, maximum bandwidth, reachable distances as well as the advantages and disadvantages in comparition with wired networks. The project describes network elements which are used in the optical access network such as media convertors, optical switches etc. The practical part includes results of testing of the network devices in various scenarios. To get a comparable result, the real throughput, the power of each device and compatibility of devices from different producers were measured. At the end I have suggested few scenarios with the usage of optical switches and media convertors for extension of the current optical network. The calculation of costs for building and operation of the network is also included.

The diploma thesis deals with creating the Ethernet converter protocol UDP of the CAN bus with the used application layer CANopen. The converter is executed by means of the microcontroller ARM Cortex-M3, namely by STM32F107VC by STMicroelectronics. The project is designed for the purpose of serving as the main motor controlling card of the mobile advertising robot FektBot. In the theoretical part you can find a brief analysis of the ARM microcotrollers problematics, particularly the STM32F107VC. Then the thesis introduces the Ethernet technology including the UDP protocol. Finally, the CAN bus and its application layer CANopen is described. The practical part shows first of all the scheme of converter hardware. You can find there the design of printed circuits including all components for proper functioning, i.e. especially the microcontroller STM32F107VC, Ethernet PHY, the CAN bus transceiver and switched stabilized supply. Next chapter describes software creating for the given converter. Firstly there are analyzed possible ways of STM32F107VC programming, and then there is the main conception of resolving the programming part shown. The thesis then deals with the concrete implementation of the UDP Ethernet protocol. For that, the lwIP stack is used, over which the application layer of the FektBot robot works. Then there is analyzed the implementation of the CAN bus and CANopen. At the end of the practical part, the final execution of the converter software and the ways of its testing are described.

This diploma thesis deals with the ideological design and realization of digital room thermostat and a temperature sensor selection. The device is designed as three units communicating wirelessly. Outdoor unit and control units sensor provide data for the control circuit of microcontroller ATmega16. Microcontroller choose the boiler operation based on senzor data. Thermostat can be remotely controled

This thesis presents the design and construction of microcontroller based laboratory kit. Hardware part describes the wiring of microcontroller based laboratory kit. Software section describes the function of each program.

Striktní nároky na systémy ochrany a zabezpečení LHC vyžadují vylepšené metody detekce rychlých ztrát částicového svazku. Rychlý proudový transformátor (FBCT) je měřicí přístroj poskytující informaci o intenzitě shluků urychlovaných částic. Tato diplomová práce popisuje vývoj nového systému ochrany LHC založeného na měření signálu FBCT. Tento systém, monitor rychlých proudových změn částicového svazku (FBCCM), měří signál FBCT v úzkém frekvenčním pásmu a počítá časovou derivaci okamžité amplitudy tohoto signálu. Tato derivace je přímo úměrná ztrátám částicového svazku. Pokud ztráty svazku překročí určitou úroveň, FBCCM přikáže kontrolním systémům zničit svazek kvůli bezpečnosti LHC. Ochrana LHC bude zabezpečena čtyřmi FBCCM, které budou instalovány do LHC v červenci 2014. Bylo zkonstruováno a testováno šest FBCCM. Jejich měřené charakteristiky vyhovují stanoveným požadavkům. FBCCM bylo vyzkoušeno laboratorní simulací reálného prostření LHC.

The aim of this work is study the standard for wireless sensor networks IEEE 802.15.4a. Design and implementation of a packet analyzer for ultra wideband technology com- pliant with IEEE 802.15.4a standard. Integrate packet analyzer to inspection software Wireshark and implement dissector for view packets. Finally, analyze and evaluate the parameters of the proposed packet analyzer.