In an effort to mitigate damage caused by earthquakes to the built environment, civil engineers have been commissioned to research, design, and build increasingly robust and resilient structural systems. Innovative means to accomplish this task have emerged, such as integrating Shape Memory Alloys (SMAs) into structural systems. SMAs are a unique class of materials that have the ability to spontaneously recover strain of up to 8%. With proper placement in a structural system, SMAs can act as superelastic "structural fuses", absorbing large deformations, dissipating energy, and recentering the structure after a loading event. Though few applications have made it into practice, the potential for widespread use has never been better due to improvements in material behavior and reductions in cost. In this research, three different SMA-based structural applications are developed and tested. The first is a tension/compression damper that utilizes nickel-titanium (NiTi) Belleville washers. The second is a partially restrained beam-column connection utilizing NiTi bars. The third is an articulated quadrilateral bracing system utilizing NiTi wire bundles in parallel with c-shape dampers. Each system was uniquely designed to allow a structure to undergo large drift demands and dissipate energy while retaining strength and recentering ability. This exploratory work highlights the potential for SMA-based structural applications to enhance seismic structural performance and community resilience.

The seismic behavior of port container cranes has been largely ignored-by owners, operators, engineers, and code officials alike. This is despite their importance to daily port operations, where historical evidence suggests that port operational downtime following a seismic event can have a crippling effect on the affected local, regional, and national economies. Because the replacement time in the event of crane collapse can be a year or more, crane collapse has the potential to be the "critical path" for post-disaster port recovery. Since the 1960's, crane designers allowed and encouraged an uplift response from container cranes, assuming that this uplift would provide a "safety valve" for seismic loading; i.e. the structural response at the onset of uplift was assumed to be the maximum structural response. However, cranes have grown much larger and more stable such that the port industry is now beginning to question the seismic performance of their modern jumbo container cranes. This research takes a step back, and reconsiders the effect that uplift response has on the seismic demand of portal-frame structures such as container cranes. A theoretical estimation is derived which accounts for the uplift behavior, and finds that the "safety valve" design assumption can be unconservative. The resulting portal uplift theory is verified with complex finite element models and experimental shake-table testing of a scaled example container crane. Using the verified models, fragility curves and downtime estimates are developed which characterize the risk of crane damage and operational downtime for three representative container cranes subjected to a range of earthquakes. This research demonstrates that container cranes designed using previous and current standards can significantly contribute to port seismic vulnerability. Lastly, performance-based design recommendations are provided which encourage the comparison of demand and capacity in terms of the critical portal deformation, using the derived portal uplift theory to estimate seismic deformation demand.

The task of &lsquo / earthquake resistant design&rsquo / of buildings is generally considered as the province of engineering profession. Although there exists considerable number of publications related to seismic design (documentations, articles, theses, books, and earthquake codes), most of them are addressed to structural engineers rather than architects. However, earthquake affects whole building and all professionals involved in construction process should have their own roles and responsibilities for earthquake resistance. This thesis is about the roles and responsibilities of architects for being one of the professionals related to building construction and, particularly, the designers of them. Exposure of the level of awareness of architects related to the importance of their architectural designs having significant effects on seismic performance of buildings, and the level of general knowledge of them related to architecture-based seismic design issues is aimed. In this thesis, firstly, terminology related to &lsquo / earthquake&rsquo / phenomena is concisely introduced. Then, the present state of attitudes (interest, awareness and consciousness) of architectural community, architects working in the architectural offices of Ankara, towards earthquake and architecture-based seismic design issues is questioned and evaluated with a survey in the form of questionnaires. The evaluation of the results is presented with the help of statistical software called SPSS. Finally, the architecture-based issues in seismic design are re-explored and introduced for the use of architects. Thus, general idea or basic knowledge is formed, which is inferred from the survey as being one of the ways to enhance the incorporation of architecture-based seismic design issues into architectural design process.

The results of an experimental investigation are presented which examine the seismic adequacy of pre-1970 reinforced concrete (RC) corner beam-column joints and the efficacy of carbon fiber-reinforced polymer (CFRP) composites for both pre- and post-earthquake retrofit of such joints. Four full-scale corner beam-column-slab subassemblages built with identical dimensions and pre-1970 reinforcement details were subjected to a reverse-cycle bidirectional displacement history consisting of alternate and simultaneous cycles in the two primary frame directions before and/or after retrofit. Two of the specimens were first subjected to severe and moderate levels of damage, respectively, then repaired by epoxy injection, and strengthened by adding a #7 reinforcing bar within the clear cover at the column inside corner and by externally bonding multiple layers of carbon fabric to form a carbon-epoxy retrofit system. Two other specimens, one of which had a significantly lower concrete compressive strength, were strengthened in their as-built condition. The CFRP scheme was improved in light of the findings as the experimental program progressed. Pre-1970 RC corner beam-column joints were found to be severely inadequate in meeting seismic demands because of column bar yielding, joint shear failure, loss of anchorage of beam bottom bars, failure of column lap-splices, and the resulting loss of stiffness and strength that dominate their behavior even at relatively low interstory drift levels. Bidirectional loading played a significant role in such response. It was shown, however, that such joints can be strengthened easily both before and after earthquake damage by using CFRP composite schemes. Regardless of the level of existing damage and concrete strength, a "rigid" joint behavior up to interstory drift ratios of at least 2.4% and joint shear strength factors ranging from 1.06 to 1.41√MPa were achieved; such shear strength factors are larger than the value of 1.00√MPa recommended for use with seismically designed, code-conforming corner beam-column joints. A ductile beam hinging mechanism was achieved and energy dissipation capacity was improved efficiently for joints with concrete strengths ranging from 26 to 34 MPa. The subassemblage with significantly low-strength concrete (15 MPa) had low overall lateral stiffness and reduced reinforcement anchorages which prevented the formation of beam hinging. In cases of such low-strength concrete, more invasive operations may be required so that the improved joint shear strength can be mobilized. It is recommended that bidirectional loading be always considered in both pre- and post-retrofit evaluation of corner joints.

Les contreventements en acier sont des moyens couramment utilisés pour assurer une rigidité latérale et une résistance aux bâtiments en acier, mais aussi aux bâtiments mixtes acierbéton et aux bâtiments en béton armé. La performance sismique des ossatures contreventées a été étudiée par de nombreux auteurs, la plupart concluent que la réponse réelle de ces ossatures peut différer beaucoup de celle des modèles simplifiés préconisés dans les codes dont l’Eurocode 8. En conséquence, pour obtenir un comportement sismique satisfaisant, ces codes peuvent d’être amendés ou même fondamentalement modifiés. Notre travail de thèse se concentre sur l’éventualité d’un comportement dissipatif localisé sur un étage de l’ossature. Les objectifs de la recherche sont les suivants: - Donner une description plus réaliste de la réponse sismique des ossatures contreventées; - Identifier les facteurs contribuant au développement d’un comportement dissipatif localisé sur un étage; - Examiner la performance des ossatures contreventées dimensionnées conformément à l’Eurocode 8; - Identifier les points faibles des règles de l’Eurocode 8 à l’origine de ce comportement insuffisant; - Proposer une méthode de redimensionnement complémentaire à la procédure actuelle de l’Eurocode 8 faisant appel à d’autres critères et vérifier la validité de cette méthode de redimensionnement sur plusieurs exemples d’ossatures démontrant la disparition complète de mécanismes dissipatifs localisés à un ou quelques étages; Afin de pouvoir apprécier l’insuffisance de l’Eurocode 8 à ce sujet, plusieurs bâtiments ont été dimensionnés selon cet Eurocode et ont été testés par des simulations numériques de type analyse dynamique incrémentale. L’évolution du déplacement relatif maximal entre étages (IDR) en fonction de l’augmentation du facteur d’échelle de l’accélération maximale du sol a été calculée à partir des résultats du calcul numérique. Il est constaté que l’apparition d’étages faibles dans les ossatures contreventées a une nature, progressive et autoamplifiante. La description précise du comportement fournit la possibilité d’une analyse critique des parties correspondantes de l’Eurocode 8 et de proposer une méthode de redimensionnement que nous avons appelé Robust Seismic Brace Design (RSBD). L’idée centrale de la méthode repose sur la nécessité d’utiliser un modèle inélastique d’analyse de la structure à la place du modèle élastique initial. Deux critères essentiels sont introduits dont l’objectif premier est de mieux répartir la dissipation en empêchant la réalisation d’un mécanisme local. Les performances des bâtiments renforcés sont sans exception meilleures que celles des bâtiments originaux; donc la méthode Robust Seismic Brace Design est une bon complément à la procédure de l’Eurocode 8 pour la conception parasismique des ossatures contreventées. / The concentric steel bracing is a commonly used way of providing lateral stiffness and resistance in both steel, composite and even concrete multi-storey framed buildings. Also it is an alternative for seismic retrofitting. The seismic performance of concentrically braced frames has been investigated by numerous authors during the past decades as several issues have been identified either related to the actual response, or the seismic design procedure implemented by standards such as the Eurocode 8. The topics are various, e.g. the cyclic dissipative behaviour of axially loaded braces, innovative bracing arrangements and members, controversial requirements imposed on the same members, localization of inelastic deformations related to the so called weak storey behaviour. The conclusion of most of the prior research conducted on the seismic performance of braced steel frames is that the actual response of a braced building differs from that of a simplified model applied by corresponding codes. Consequently, to safeguard satisfactory seismic behaviour, the Eurocode 8 standard in particular needs to be modified or amended. In order to confine the addressed topic to a size that may be discussed sufficiently in the frame of a PhD research, in the present thesis primarily the weak storey behaviour is looked into. The objectives of the research are: - Provide a better description of the seismic response of concentrically braced frames; - Identify the factors contributing to the development of weak storeys; - Investigate the performance of braced buildings designed according to Eurocode 8; - Identify the reasons why the Eurocode 8 designs are found usually inadequate; - Propose a new design method or additional criteria to the existing Eurocode 8 procedure and verify their viability by providing designs that successfully counteract seismic actions without the development of weak storeys; In the dissertation it is demonstrated by the incremental dynamic analysis of several braced frames that the Eurocode 8 provisions do not provide satisfactory designs. The examination of the responses of the designs is used to characterize the behaviour. It is found that the occurrence of weak storeys in braced frames has a specific, gradual, self-amplifying nature. By further analysis of the seismic responses, proof is given to the existence of this specific behaviour. The better description of the behaviour provides the possibility of a critical analysis of the corresponding parts of Eurocode 8 and the basis of the Robust Seismic Brace Design method criteria. These criteria are related to the anticipated inelastic seismic response of braced frames, and with their application in design weak storeys can be easily recognized and reinforced. The performances of the reinforced buildings are without exception better than that of the original Eurocode 8 designs; therefore the Robust Seismic Brace Design method is found to be a good alternative of the Eurocode 8 procedure for the seismic design of concentrically braced frames.

No description available.

Thesis (MScEng (Civil Engineering))--University of Stellenbosch, 2010. / ENGLISH ABSTRACT: Reinforced concrete structures, designed according to proper capacity design guidelines, can deform inelastically without loss of strength. Therefore, such structures need not be designed for full elastic seismic demand, but could be designed for a reduced demand. In codified design procedures this reduced demand is obtained by dividing the full elastic seismic demand by a code-defined behaviour factor. There is however not any consensus in the international community regarding the appropriate value to be assigned to the behaviour factor. This is evident in the wide range of behaviour factor values specified by international design codes. The purpose of this study is to assess the seismic drift of reinforced concrete structural walls in order to evaluate the current value of the behaviour factor prescribed by SANS 10160-4 (2009). This is done by comparing displacement demand to displacement capacity for a series of structural walls. Displacement demand is calculated according to equivalency principles (equal displacement principle and equal energy principle) and verified by means of a series of inelastic time history analyses (ITHA). In the application of the equivalency rules the fundamental periods of the structural walls were based on cracked sectional stiffness from moment-curvature analyses. Displacement capacity is defined by seismic design codes in terms of inter storey drift limits, with the purpose of preventing non-structural damage in building structures. In this study both the displacement demand and displacement capacity were converted to ductility to enable comparison. The first step in seismic force-based design is the estimation of the fundamental period of the structure. The influence of this first crucial step is investigated in this study by considering two period estimation methods. Firstly, the fundamental period may be calculated from an equation provided by the design code which depends on the height of the building. This equation is known to overestimate acceleration demand, and underestimate displacement demand. The second period estimation method involves an iterative procedure where the stiffness of the structure is based on the cracked sectional stiffness obtained from moment-curvature analysis. This method provides a more realistic estimate of the fundamental period of structures, but due to its iterative nature it is not often applied in design practice. It was found that, regardless of the design method, the current behaviour factor value prescribed in SANS 10160-4 (2010) is adequate to ensure that inter storey drift of structural walls would not exceed code-defined drift limits. Negligible difference between the equivalency principles and ITHA was observed. / AFRIKAANSE OPSOMMING: Gewapende beton strukture wat ontwerp is volgens goeie kapasiteitsontwerp-riglyne kan plasties vervorm sonder verlies aan sterkte. Gevolglik hoef hierdie strukture nie vir die volle elastiese seismiese aanvraag ontwerp te word nie, maar kan vir 'n verminderde aanvraag ontwerp word. In gekodifiseerde ontwerpriglyne word so 'n verminderde aanvraag verkry deur die volle elastiese aanvraag te deel deur 'n kode-gedefinieerde gedragsfaktor. Wat egter duidelik blyk uit die wye reeks van gedragsfaktor waardes in internasionale ontwerp kodes, is dat daar geen konsensus bestaan in die internasionale gemeenskap met betrekking tot die geskikte waarde van die gedragsfaktor nie. Die doel van hierdie studie is om seismiese verplasing van gewapende beton skuifmure te evalueer ten einde die waarde van die gedragsfaktor wat tans deur SANS 10160-4 (2009) voorgeskryf word te assesseer. Dit word gedoen deur verplasingsaanvraag te vergelyk met verplasingskapasiteit. In hierdie studie word verplasingsaanvraag bereken deur middel van gelykheidsbeginsels (gelyke verplasingsbeginsel en gelyke energiebeginsel) en bevestig deur middel van nie-elastiese tydsgeskiedenis analises (NTGA). Die effek van versagting as gevolg van nie-elastiese gedrag word in aanmerking geneem in die toepassing van die gelykheidsbeginsels. Verplasingskapasiteit word deur seismiese ontwerpkodes gedefinieer deur perke te stel op die relatiewe laterale beweging tussen verdiepings, met die doel om nie-strukturele skade te verhoed. Om verplasingsaanvraag en -kapasiteit te vergelyk in hierdie studie, word beide omgeskakel na verplasingsduktiliteit. Die eerste stap in kraggebaseerde seismiese ontwerp is om die fundamentele periode te beraam. Die invloed van hierdie eerste kritiese stap word in hierdie studie aangespreek deur twee periodeberamingsmetodes te ondersoek. Eerstens kan die fundamentele periode bereken word deur 'n vergelyking wat 'n funksie is van die hoogte van die gebou. Dit is egter algemeen bekend dat hierdie vergelyking versnellingsaanvraag oorskat en verplasingsaanvraag onderskat. Die tweede metode behels 'n iteratiewe prosedure waar die styfheid van die struktuur gebaseer word op die gekraakte snit eienskappe, verkry vanaf 'n moment-krommingsanalise. 'n Beter beraming van die fundamentele periode word verkry deur hierdie metode, maar as gevolg van die iteratiewe aard van die metode word dit selde toegepas in ontwerppraktyk. Die resultate van hierdie studie toon dat die huidige waarde van die gedragfaktor soos voorgeskryf in SANS 10160-4 (2010) geskik is om te verseker dat die relatiewe laterale beweging tussen verdiepings binne kode-gedefinieerde perke sal bly. Onbeduidende verskil is waargeneem tussen die resultate van gelykheidsbeginsels en NTGA.

The feasibility of using superelastic shape memory alloys in the retrofit of multiple frame bridges is investigated. First, three shape memory alloy constitutive models with various levels of complexity are compared in order to determine the significance of including subloops and cyclic loading effects on the structural response. The results show that the structural response is more sensitive to the shape memory alloys strength degradation and residual deformation than the sublooping behavior. Next, two parametric studies are conducted to explore the sensitivity of hinge opening to the mechanical behavior of the superelastic shape memory alloys. The first study is focused on the hysteretic properties of the alloy that could vary depending on the chemical composition or the manufacturing process of the alloy, while the second study targets the changes in the mechanical behavior of shape memory alloys resulting from the variability in the ambient temperature. The results show that the hysteretic behavior of shape memory alloys has only a slight effect on the bridge hinge opening as long as the recentering property is maintained. A detailed study on the effect of temperature shows that a reduction in the ambient temperature tends to negatively affect the hinge opening while an increase in temperature results in a slight improvement. Next, a parametric study is conducted to examine the effectiveness of shape memory alloy retrofit devices in limiting hinge openings in bridges with various properties. In addition, a comparison is made with other devices such as conventional steel restrainers, metallic dampers, and viscoelastic solid dampers. The results illustrate that superelastic shape memory alloys are superior in their effectiveness compared to other devices in the case of bridges with moderate period ratios and high level of ductility, especially when subjected to strong earthquakes.

This thesis investigates the performance of composite frame structures with smart partially-restrained (PR) concrete filled tube (CFT) column connections through simplified 2D and advanced 3D computational simulations. It also provides a design methodology for new types of innovative connections based on achieving a beam hinging mechanism. These types of connections intend to utilize the recentering properties of super-elastic SMA tension bars, the energy dissipation capacity of low-carbon steel bars, and the robustness of CFT columns. In the first part of this study, three different PR-CFT connection prototypes were designed based on a hierarchy of strength models for each connection component. Numerical simulations with refined three dimensional (3D) solid elements were conducted on full scale PR-CFT connection models in order to verify the strength models and evaluate the system performance under static loading. Based on system information obtained from these analyses, simplified connection models were formulated by replacing the individual connection components with spring elements and condensing their contributions. Connection behavior under cyclic loads was extrapolated and then compared with the monotonic behavior. In the second part of this study, the application of these connections to low-rise composite frames was illustrated by designing both 2D and 3D, 4 and 6 story buildings for the Los Angeles region. A total of 36 frames were studied. Pushover curves plotted as the normalized shear force versus inter story drift ratio (ISDR) showed significant transition points: elastic range or proportional limit, full yielding of the cross-section, strength hardening, ultimate strength, and strength degradation or stability limit. Based on the transition points in the monotonic pushover curves, three performance levels were defined: Design Point, Yield Point, and Ultimate Point. All frames were stable up to the yield point level. For all fames, after reaching the ultimate point, plastic rotation increased significantly and concentrated on the lower levels. These observations were quantified through the use of elastic strength ratios and inelastic curvature ductility ratios. The composite frames showed superior performance over traditional welded ones in terms of ductility and stability, and validated the premises of this research.

Planet earth is restless and one cannot control its inside activities and vibrations those leading to natural hazards. Earthquake is one of such natural hazards that have affected the mankind most. Most of the causalities due to earthquakes happened not because of earthquakes as such, but because of poorly designed structures which could not withstand the earthquake forces. The improper building construction techniques adopted and the high population density are the major causes of the heavy damage due to earthquakes. The damage due to earthquakes can be reduced by following proper construction techniques, taking into consideration of appropriate forces on the structure that can be caused due to future earthquakes. The steps towards seismic hazard evaluation are very essential to estimate an optimal and reliable value of possible earthquake ground motion during a specific time period. These predicted values can be an input to assess the seismic vulnerability of an area based on which new construction and the restoration works of existing structures can be carried out. A large number of devastating earthquakes have occurred in India in the past. The northern region of India, which is along the plate boundary of the Indian plate with the Eurasian plate, is seismically very active. The north eastern movement of Indian plate has caused deformation in the Himalayan region, Tibet and the North Eastern India. Along the Himalayan belt, the Indian and Eurasian plates converge at the rate of about 50 mm/year (Bilham 2004; Jade 2004). The North East Indian (NEI) region is known as one of the most seismically active regions in the world. However the peninsular India, which is far away from the plate boundary, is a stable continental region, which is considered to be of moderate seismic activity. Even though, the activity is considered to be moderate in the Peninsular India, world’s deadliest earthquake occurred in this region (Bhuj earthquake 2001). The rapid drifting of Indian plate towards Himalayas in the north east direction with a high velocity along with its low plate thickness might be the cause of high seismicity of the Indian region. Bureau of Indian Standard has published a seismic zonation map in 1962 and revised it in 1966, 1970, 1984 and 2002. The latest version of the seismic zoning map of India assigns four levels of seismicity for the entire Country in terms of different zone factors. The main drawback of the seismic zonation code of India (BIS-1893, 2002) is that, it is based on the past seismic activity and not based on a scientific seismic hazard analysis. Several seismic hazard studies, which were taken up in the recent years, have shown that the hazard values given by BIS-1893 (2002) need to be revised (Raghu Kanth and Iyengar 2006; Vipin et al. 2009; Mahajan et al. 2009 etc.). These facts necessitate a comprehensive study for evaluating the seismic hazard of India and development of a seismic zonation map of India based on the Peak Ground Acceleration (PGA) values. The objective of this thesis is to estimate the seismic hazard of entire India using updated seismicity data based on the latest and different methodologies. The major outcomes of the thesis can be summarized as follows. An updated earthquake catalog that is uniform in moment magnitude, has been prepared for India and adjoining areas for the period till 2010. Region specific magnitude scaling relations have been established for the study region, which facilitated the generation of a homogenous earthquake catalog. By carefully converting the original magnitudes to unified MW magnitudes, we have removed a major obstacle for consistent assessment of seismic hazards in India. The earthquake catalog was declustered to remove the aftershocks and foreshocks. Out of 203448 events in the raw catalog, 75.3% were found to be dependent events and remaining 50317 events were identified as main shocks of which 27146 events were of MW ≥ 4. The completeness analysis of the catalog was carried out to estimate completeness periods of different magnitude ranges. The earthquake catalog containing the details of the earthquake events until 2010 is uploaded in the website the catalog was carried out to estimate completeness periods of different magnitude ranges. The earthquake catalog containing the details of the earthquake events until 2010 is uploaded in the website the catalog was carried out to estimate completeness periods of different magnitude ranges. The earthquake catalog containing the details of the earthquake events until 2010 is uploaded in the website A quantitative study of the spatial distribution of the seismicity rate across India and its vicinity has been performed. The lower b values obtained in shield regions imply that the energy released in these regions is mostly from large magnitude events. The b value of northeast India and Andaman Nicobar region is around unity which implies that the energy released is compatible for both smaller and larger events. The effect of aftershocks in the seismicity parameters was also studied. Maximum likelihood estimations of the b value from the raw and declustered earthquake catalogs show significant changes leading to a larger proportion of low magnitude events as foreshocks and aftershocks. The inclusions of dependent events in the catalog affect the relative abundance of low and high magnitude earthquakes. Thus, greater inclusion of dependent events leads to higher b values and higher activity rate. Hence, the seismicity parameters obtained from the declustered catalog is valid as they tend to follow a Poisson distribution. Mmax does not significantly change, since it depends on the largest observed magnitude rather than the inclusion of dependent events (foreshocks and aftershocks). The spatial variation of the seismicity parameters can be used as a base to identify regions of similar characteristics and to delineate regional seismic source zones. Further, Regions of similar seismicity characteristics were identified based on fault alignment, earthquake event distribution and spatial variation of seismicity parameters. 104 regional seismic source zones were delineated which are inevitable input to seismic hazard analysis. Separate subsets of the catalog were created for each of these zones and seismicity analysis was done for each zone after estimating the cutoff magnitude. The frequency magnitude distribution plots of all the source zones can be found at http://civil.iisc.ernet.in/~sitharam . There is considerable variation in seismicity parameters and magnitude of completeness across the study area. The b values for various regions vary from a lower value of 0.5 to a higher value of 1.5. The a value for different zones vary from a lower value of 2 to a higher value of 10. The analysis of seismicity parameters shows that there is considerable difference in the earthquake recurrence rate and Mmax in India. The coordinates of these source zones and the seismicity parameters a, b & Mmax estimated can be directly input into the Probabilistic seismic hazard analysis. The seismic hazard evaluation of the Indian landmass based on a state-of-the art Probabilistic Seismic Hazard Analysis (PSHA) study has been performed using the classical Cornell–McGuire approach with different source models and attenuation relations. The most recent knowledge of seismic activity in the region has been used to evaluate the hazard incorporating uncertainty associated with different modeling parameters as well as spatial and temporal uncertainties. The PSHA has been performed with currently available data and their best possible scientific interpretation using an appropriate instrument such as the logic tree to explicitly account for epistemic uncertainty by considering alternative models (source models, maximum magnitude in hazard computations, and ground-motion attenuation relationships). The hazard maps have been produced for horizontal ground motion at bedrock level (Shear wave velocity ≥ 3.6 km/s) and compared with the earlier studies like Bhatia et al., 1999 (India and adjoining areas); Seeber et al, 1999 (Maharashtra state); Jaiswal and Sinha, 2007 (Peninsular India); Sitharam and Vipin, 2011 (South India); Menon et al., 2010 (Tamilnadu). It was observed that the seismic hazard is moderate in Peninsular shield (except the Kutch region of Gujarat), but the hazard in the North and Northeast India and Andaman-Nicobar region is very high. The ground motion predicted from the present study will not only give hazard values for design of structures, but also will help in deciding the locations of important structures such as nuclear power plants. The evaluation of surface level PGA values is of very high importance in the engineering design. The surface level PGA values were evaluated for the entire study area for four NEHRP site classes using appropriate amplification factors. If the site class at any location in the study area is known, then the ground level PGA values can be obtained from the respective map. In the absence of VS30 values, the site classes can be identified based on local geological conditions. Thus this method provides a simplified methodology for evaluating the surface level PGA values. The evaluation of PGA values for different site classes were evaluated based on the PGA values obtained from the DSHA and PSHA. This thesis also presents VS30 characterization of entire country based on the topographic gradient using existing correlations. Further, surface level PGA contour map was developed based on the same. Liquefaction is the conversion of formally stable cohesionless soils to a fluid mass, due to increase in pore pressure and is prominent in areas that have groundwater near the surface and sandy soil. Soil liquefaction has been observed during the earthquakes because of the sudden dynamic earthquake load, which in turn increases the pore pressure. The evaluation of liquefaction potential involves evaluation of earthquake loading and evaluation of soil resistance to liquefaction. In the present work, the spatial variation of the SPT value required to prevent liquefaction has been estimated using a probabilistic methodology, for entire India. To summarize, the major contribution of this thesis are the development of region specific magnitude correlations suitable for Indian subcontinent and an updated homogeneous earthquake catalog for India that is uniform in moment magnitude scale. The delineation and characterization of regional seismic source zones for a vast country like India is a unique contribution, which requires reasonable observation and engineering judgement. Considering complex seismotectonic set up of the country, the present work employed numerous methodologies (DSHA and PSHA) in analyzing the seismic hazard using appropriate instrument such as the logic tree to explicitly account for epistemic uncertainties considering alternative models (For Source model, Mmax estimation and Ground motion prediction equations) to estimate the PGA value at bedrock level. Further, VS30 characterization of India was done based on the topographic gradient, as a first level approach, which facilitated the development of surface level PGA map for entire country using appropriate amplification factors. Above factors make the present work very unique and comprehensive touching various aspects of seismic hazard. It is hoped that the methodology and outcomes presented in this thesis will be beneficial to practicing engineers and researchers working in the area of seismology and geotechnical engineering in particular and to the society as a whole.