No description available.

Vertical axis wind turbine, developed as one of the main methods to utilize the wind energy, has a promising future; however, the major issue to limit its performance is the uneven loading on the blade during operation. Flow control mechanisms have been employed in the aerodynamic field to improve the performance of airfoils. In this study, two types of leading-edge structures, including flexible leading-edge and leading-edge roughness, are experimentally investigated to analyze their effects on altering the aerodynamic characteristics of NACA 0018 airfoil under steady flow condition and dynamic pitching condition. Current experimental results indicate that 1) during the steady flow condition, both of leading-edge structures contribute to the delay of the static stall; 2) for the dynamic pitching process, the leading-edge structures either delayed the dynamic stall angle or increased the area of the coefficient of pressure loop as a function of angle of attack.

Thesis (Ph. D.)--University of Washington, 2001. / Vita. Includes bibliographical references (p. 111-122).

Liquid crystal display (LCD) has been widely used as an important human interface with typical portable devices such as notebook-type computers, digital camera and cell phones, etc. The LCD panel does not emit light spontaneously, and thus it needs a surface backlight source. The function of light guide plate (LGP) was to guide light from a light source and radiates it homogeneously from all over its output surface. In this thesis, the research object was focused on this optical component. This thesis mainly concludes two major parts. The first part focused on the design of cold fluorescent lamp (CCFL) light source LGP. If the bottom structure of the LGP in a backlight module was made up of V-Cut micro-structures, then conventionally, the shape and spacing between any two adjacent columns of micro-structure should be designed specifically in order to obtain a more uniform illuminance distribution. It was required to apply complicated mathematics and cost a lot of time to design. In this study, a simplified bottom structure of the LGP was proposed. The considered bottom structure of the LGP was proposed to be made up of same shape high energy V-Cut micro-structures, and the spacing between any two adjacent columns of the micro-structure was also the same. The design parameters were determined by using optimization technique. Also, the LCD design time could be reduced. In order to eliminate the dark region phenomenon caused by the proposed simplified bottom structure of the LGP, a simple new type of edge structure of the LGP was proposed also. The proposed simplified LGP design concepy has many merits, such as only three design parameters needed, manufacturing easily, the design time can be reduced, and can prevent the consumption of light source energy between the gaps of CCFL and LGP. The proposed design concept was applied on the design of 7 inches, 15 inches and 20 inches of backlight module (BLM). Through the numerical simulation by utilizing commercial software Light Tools, it can be shown that more than 80% of uniformity can be easily obtained. The second part focused on traditional dot pattern bottom structures. As the same concept mentioned in the first part, the proposed dot pattern was made up of same geometrival shape of dots, and the spacing between any two adjacent columns of the dots was also the same. The design parameters were determined by using optimization technique. The proposed design concept of the dot patten distribution can be applied on the design of LGP with either LED or CCFL light source. Also, the dark phenomenon did not occur, and so the corresponding edge structure did not need either. The proposed design concept was applied on the design of 7 inches, 15 inches and 20 inches of BLM with CCFL light source and on the design of 7 inches of BLM with LED light sources. The optical simulation results showed that about 90% of uniformity can be easily obtained.

Thesis (Ph. D.)--University of Washington, 2005. / Vita. Includes bibliographical references (leaves 156-168).

Summary Serpentinites from the northern Vermont were examined for the distribution and abundance of As. XRD and electron microprobe showed the samples are composed of antigorite, chromite, magnetite, and carbonate minerals (magnesite, dolomite, calcite). The concentration in As when the samples were dissolved in H3PO4 was 10% of the concentration in As when the samples were dissolved in concentrated HF/HNO3, suggesting that As is mainly incorporated in the structure of antigorite. X-ray absorption near-edge structure spectra showed that the As is As(III) in the samples. Extended X-ray absorption fine structure spectra suggested that the As has a tetrahedral coordination and is located in the Si-site in serpentine.

Summary Serpentinites from the northern Vermont were examined for the distribution and abundance of As. XRD and electron microprobe showed the samples are composed of antigorite, chromite, magnetite, and carbonate minerals (magnesite, dolomite, calcite). The concentration in As when the samples were dissolved in H3PO4 was 10% of the concentration in As when the samples were dissolved in concentrated HF/HNO3, suggesting that As is mainly incorporated in the structure of antigorite. X-ray absorption near-edge structure spectra showed that the As is As(III) in the samples. Extended X-ray absorption fine structure spectra suggested that the As has a tetrahedral coordination and is located in the Si-site in serpentine.

In this thesis, we have performed systematical study of anomalous electric and magnetic behaviors of the 3d transition metal oxides; colossal magnetoresistance (La1−xRxMnO3 where R is a divalent alkaline earth ion) and Multiferroic (Ho1-xLaxMn2O5) systems by X-ray and Neutron scattering techniques. In our study, the enhancement of the transfer temperature for La0.8Ba0.2MnO3 under strain effect from the SrTiO3 substrate could be possible due to two reasons which one is Sr diffusion from SrTiO3 substructure, and other one is the octahedral MnO6 high symmetry are increasing. We focus the intrinsic strain effect on La0.67Ca0.33MnO3 and La0.8Ba0.2MnO3 films, and findings show that due to the different ionic sizes of doped Ca or Ba ions, the strain effect acts differently in the way it deforms. The interfacial strain effect produces opposite influences on the lattice symmetry, the average Mn¡VO bond lengths, the average oxygen disorders, the coupling symmetries inside and in the vicinity of the MnO6 octahedrons, as well as producing an opposing trend in metal-insulator and magnetic transition temperatures of the strained La0.67Ca0.33MnO3 and La0.8Ba0.2MnO3 films. The strain effects on the electronic structures of La0.67Ca0.33MnO3 and La0.8Ba0.2MnO3 thin films have been studied by O K-edge x-ray absorption near edge structure (XANES) spectroscopy. For La0.67Ca0.33MnO3, the first-principles calculations reveal that the features in the XANES spectra are associated with hybridized states between O 2p and Mn minority-spin 3d t2g and eg, La 5d/Ca 3d, and Mn 4s/Ca 4p states. An analysis of these features shows that the tensile strain decreases substantially La¡VO and Ca¡VO hybridization and TC for La0.67Ca0.33MnO3. For La0.8Ba0.2MnO3, the small compressive strain enhances slightly La¡VO and Ba¡VO hybridization and TC. In this thesis, the influence of the local structure distortion on the magnetic transition in La doped HoMn2O5 Multiferroics has been investigated systematically. The orthorhombic crystal structure of Ho1−xLaxMn2O5 is maintained up to x¡Ø0.2 but decomposed into multiphase for x¡Ù0.25. By doping La ions to a concentration of 0.1¡Øx¡Ø0.2, the formation of the RMnO3 1(13) phase can be suppressed and single-phase Ho1−xLaxMn2O5 (0.1¡Øx¡Ø0.2) compounds can be formed under 1 atm flowing oxygen. For x=0.2, a ferromagnetic FM transition at 150 K is superimposed on the paramagnetic background, which implies that the compound undergoes a ferromagnetic to antiferromagnetic (AFM) transition. This unique FM to AFM transition is observed for the first time. The FM transition is attributed to the formation of magnetic clusters in a host paramagnetic matrix. The anomalous magnetic clusters phenomena observed in Ho0.8La0.2Mn2O5 can be directly attributed to the different properties between Ho and La ions, and the differences of Ho and La ions are not only in the ionic radius but also in the electron negativity. During 90~150K, X-ray scattering diffraction presented the new addition peaks indicates the new electric density distribution, and the Neutron powder scattering diffraction (NPD) refining results show that the local structure of R-O (R: La, Ho) is un-symmetry which is conflict to the La Extended X-ray absorption fine structure (EXAFS) (which shows that the local structure of La-O becomes more symmetry than H-O. Since the refining values of the NPD are an average of entire crystal, such that it cannot tell the local changes. X-ray absorption spectrum (XAS) and EXAFS, in contrarily, can provide the local information. They implies that the temperature evolutions of the coupling strength with O 2p or unoccupied density state are opposite for the Ho and La ions in our Ho0.8La0.2Mn2O5 sample. Therefore, local change of ions position and charge redistribution happens in this specific temperature range.

Summary Serpentinites from the northern Vermont were examined for the distribution and abundance of As. XRD and electron microprobe showed the samples are composed of antigorite, chromite, magnetite, and carbonate minerals (magnesite, dolomite, calcite). The concentration in As when the samples were dissolved in H3PO4 was 10% of the concentration in As when the samples were dissolved in concentrated HF/HNO3, suggesting that As is mainly incorporated in the structure of antigorite. X-ray absorption near-edge structure spectra showed that the As is As(III) in the samples. Extended X-ray absorption fine structure spectra suggested that the As has a tetrahedral coordination and is located in the Si-site in serpentine.

Thesis (Ph. D.)--University of Washington, 1997. / Vita. Includes bibliographical references (p. [153]-167).