Listeria monocytogenes is a major concern for the food industry. It is one of the major agents causing listeriosis. The objective of the first part of this study is to evaluate the effect of hydration level on attached listeria monocytogenes on stainless steel/High density polyethylene transferred to food products. Attached cells were prepared on stainless steel/High density polyethylene. Transfer experiments were conducted from inoculated surface material slides to cold smoked salmon fillets. This experiment was repeated 6 times. The results were analyzed with an analysis of variance by SAS. The differences between the different RH% and surface conditions were not statistically significant. There was variability in between packages, brands and over the course of storage after opening, and likely contributed to the variability of transfer observed in this set of experiments. The objective of the second part of the research is to study the effect of hydration level on the detachment of Listeria monocytogenes biofilm growing on stainless steel by using Atomic force microscope. Biofilms were grown on stainless steel in drip flow bioreactor at 32 °C for 72 h. Then biofilms were equilibrated over saturated salt solution at 20 °C for 48 h before the Atomic Force Microscope experiment. The results showed that cohesive energy value of the biofilm increased with biofilm depth. Only square shaped displaced 2.5X2.5 μm region were visualized after serious of raster scanning under high load which means that moisture condition of Listeria monocytogenes biofilm can significantly affect the cohesiveness between of Listeria monocytogenes biofilm.

No description available.

Indiana University-Purdue University Indianapolis (IUPUI) / A gearless hydraulic wind energy transfer system utilizes the hydraulic power transmission principles to integrate the energy of multiple wind turbines in a central power generation location. The gearless wind power transfer technology may replace the current energy harvesting system to reduce the cost of operation and increase the reliability of wind power generation. It also allows for the integration of multiple wind turbines to one central generation unit, unlike the traditional wind power generation with dedicated generator and gearbox. A Hydraulic Transmission (HT) can transmit high power and can operate over a wide range of torque-to-speed ratios, allowing efficient transmission of intermittent wind power. The torque to speed ratios illustrates the relationship between the torque and speed of a motor (or pump) from the moment of start to when full-load torque is reached at the manufacturer recommended rated speed. In this thesis, a gearless hydraulic wind energy harvesting and transfer system is mathematically modeled and verified by experimental results. The mathematical model is therefore required to consider the system dynamics and be used in control system development. Mathematical modeling also provided a method to determine the losses of the system as well as overall efficiency. The energy is harvested by a low speed-high torque wind turbine connected to a high fixed-displacement hydraulic pump, which is connected to hydraulic motors. Through mathematical modeling of the system, an enhanced understanding of the HTS through analysis was gained that lead to a highly efficient hydraulic energy transmission system. It was determined which factors significantly influenced the system operation and its efficiency more. It was also established how the overall system operated in a multiple wind turbine configuration. The quality of transferred power from the wind turbine to the generator is important to maintaining the systems power balance, frequency droop control in grid-connected applications, and to ensure that the maximum output power is obtained. A hydraulic transmission system can transfer large amounts of power and has more flexibility than a mechanical and electrical system. However high-pressure hydraulic systems have shown low efficiency in wind power transfer when interfaced with a single turbine to a ground-level generator. HT’s generally have acceptable efficiency at full load and drop efficiency as the loading changes, typically having a peak around 60%. The efficiency of a HT is dependent on several parameters including volumetric flow rate, rotational speed and torque at the pump shaft, and the pressure difference across the inlet and outlet of the hydraulic pump and motor. It has been demonstrated that using a central generation unit for a group of wind turbines and transferring the power of each turbine through hydraulic system increases the efficiency of the overall system versus one turbine to one central generation unit. The efficiency enhancement depends on the rotational speed of the hydraulic pumps. Therefore, it is proven that the multiple-turbine hydraulic power transfer system reaches higher efficiencies at lower rotational speeds. This suggests that the gearbox can be eliminated from the wind powertrains if multiple turbines are connected to the central generation unit. Computer simulations and experimental results are provided to quantify the efficiency enhancements obtained by adding the second wind turbine hydraulic pump to the system.