"In the design of any antenna radiator, single or multi-element, a significant amount of time and resources is spent on impedance matching. There are broadly two approaches to impedance matching; the first is the distributed impedance matching approach which leads to modifying the antenna geometry itself by identifying appropriate degrees of freedom within the structure. The second option is the lumped element approach to impedance matching. In this approach instead of modifying the antenna geometry a passive network attempts to equalize the impedance mismatch between the source and the antenna load. This thesis introduces a new technique of impedance matching using lumped circuits (passive, lossless) for electrically small (short) non-resonant dipole/monopole antennas. A closed form upper-bound on the achievable transducer gain (and therefore the reflection coefficient) is derived starting with the Bode-Fano criterion. A 5 element equalizer is proposed which can equalize all dipole/monopole like antennas. Simulation and experimental results confirm our hypothesis. The second contribution of this thesis is in the design of broadband, small size, modular arrays (2, 4, 8 or 16 elements) using the distributed approach to impedance matching. The design of arrays comprising a small number of elements cannot follow the infinite array design paradigm. Instead, the central idea is to find a single optimized radiator (unit cell) which if used to build the 2x1, 4x1, 2x2 arrays, etc. (up to a 4x4 array) will provide at least the 2:1 bandwidth with a VSWR of 2:1 and stable directive gain (not greater than 3 dB variation) in each configuration. Simulation and experimental results for a solution to the 2x1, 4x1 and 2x2 array configurations is presented. "

Non-radiative wireless power transfer using the coupled mode resonance phenomenon has been widely reported in the literature. However, the distance over which such phenomenon exists is very short when measured in terms of wavelength. In this dissertation, how efficient wireless power transfer can be realized in the radiating near-field region beyond the coupled mode resonance region is investigated. First, electrically small folded cylindrical helix (FCH) dipole antennas are designed to achieve efficient near-field power transfer. Measurements show that a 40% power transfer efficiency (PTE) can be realized at the distance of 0.25λ between two antennas in the co-linear configuration. These values come very close to the theoretical upper bound derived based on the spherical mode theory. The results also highlight the importance of antenna radiation efficiency and impedance matching in achieving efficient wireless power transfer. Second, antenna diversity is explored to further extend the range or efficiency of the power transfer. For transmitter diversity, it is found that a stable PTE region can be created when multiple transmitters are employed at sufficiently close spacing. For receiver diversity, it is found that the overall PTE can be improved as the number of the receivers is increased. Third, small directive antennas are investigated as a means of enhancing near-field wireless power transfer. Small directive antennas based on the FCH design are also implemented to enhance the PTE. It is shown that the far-field realized gain is a good surrogate for designing small directive antennas for near-field power transfer. Fourth, to examine the effects of surrounding environments on near-field coupling, an upper bound for near-field wireless power transfer is derived when a transmitter and a received are separated by a spherical material shell. The derived PTE bounds are verified using full-wave electromagnetic simulation and show good agreement for both TM mode and TE mode radiators. Using the derived theory, lossy dielectric material effects on wireless power transfer are studied. Power transfer measurements through walls are also reported and compared with the theory. Lastly, electrically small circularly polarized antennas are investigated as a means of alleviating orientation dependence in near-field wireless power transfer. An electrically small turnstile dipole antenna is designed by utilizing top loading and multiple folding. The circularly polarization characteristic of the design is first tested in the far field, before the antennas are placed in the radiating near-field region for wireless power transfer. It is shown that such circularly polarized antennas can lessen orientation dependence in near-field coupling. / text

ITC/USA 2012 Conference Proceedings / The Forty-Eighth Annual International Telemetering Conference and Technical Exhibition / October 22-25, 2012 / Town and Country Resort & Convention Center, San Diego, California / There are always some intrinsic tradeoffs among the performance characteristics: radiation efficiency, directivity, and bandwidth, of electrically small antennas (ESAs). A non-Foster enhanced, broad bandwidth, metamaterial-inspired, electrically small, Egyptian axe dipole (EAD) antenna has been successfully designed and measured to overcome two of these restrictions. By incorporating a non-Foster circuit internally in the near-field resonant parasitic (NFRP) element, the bandwidth of the resulting electrically small antenna was enhanced significantly. The measured results show that the 10 dB bandwidth (BW10dB) of the non-Foster circuit-augmented EAD antenna is more than 6 times the original BW10dB value of the corresponding passive EAD antenna.

The main focus of the work presented in this thesis concerns the development and improvement of Wireless Sensor Networks (WSNs) as well as Wireless Body Area Networks (WBANs). WSN consist of interlinked, wireless devices (nodes) capable of relaying data wirelessly between the nodes. The applications of WSNs are very broad and cover both wireless fitness monitoring systems such as pulse watches or wireless temperature monitoring of buildings, among others. The topics investigated in the work presented within this thesis covers antenna design, wireless propagation environment evaluation and modeling, adaptive antenna control and wireless nodes system design and evaluation. In order to provide an end-user suitable solution for wireless nodes the devices require both small form factor and good performance in order to be competitive on the marked and thus the main part of this thesis focuses on techniques developed and data collected to help achieve these goals.  Several different prototype systems have been developed which have been used to measure data by the Swedish Defence Research Agency (FOI), GKN Aerospace Sweden AB, the Swedish Transport Administration. The system developed with GKN Aerospace was used to do real-time test measurements inside a running RM12 jet engine and required a substantial amount of measurements, environmental modeling and system validation in order to properly design a wireless system suitable for the harsh and fast fading environment inside a jet engine. For FOI improvements were made on a wearable wireless body area network initially developed during the authors master thesis work. Refinements included work on new generation wireless nodes, antenna packaging and node-supported diversity techniques. Work and papers regarding the design of different types of antennas suitable for wireless nodes are presented. The primary constraints on the presented antennas are the limited electrical size. The types of antennas developed include electrically small helix antennas manufactured both on stretchable substrates consisting of a PDMS substrate with Galinstan as the liquid metal conductors, screen printed silver ink for helix antennas and conformal dual patch antennas for wireless sensor nodes. Other standard type antennas are included on the wireless sensors as well.

When an electrically small antenna is conceived, designed, simulated, and tested, the main emphasis is usually placed immediately on its impedance bandwidth and radiation efficiency. All too often it is assumed that its directivity will only be that of a Hertzian dipole and, hence, its directivity becomes a minor consideration. This is particularly true if such a compact antenna radiates in the presence of a large ground plane. Attention is typically focused on the radiator and its size, while the ground plane is forgotten. This has become a too frequent occurrence when antennas, such as patch antennas that have been augmented with metamaterial structures, are explored. In this paper, it is demonstrated that while the ground plane has little impact on the resonance frequency and impedance bandwidth of patch antennas or metamaterial-inspired three-dimensional magnetic EZ antennas, it has a huge impact on their directivity performance. Moreover, it is demonstrated that with both a metamaterial-inspired two-element array and a related Huygens dipole antenna, one can achieve broadside-radiating electrically small systems that have high directivities. Several common and original designs are used to highlight these issues and to emphasize why a fundamental figure of merit such as directivity should never be overlooked.

No description available.

A broadside radiating, linearly polarized, electrically small Huygens source antenna system that has a large impedance bandwidth is reported. The bandwidth performance is facilitated by embedding non-Foster components into the near-field resonant parasitic elements of this metamaterial-inspired antenna. High-quality and stable radiation performance characteristics are achieved over the entire operational bandwidth. When the ideal non-Foster components are introduced, the simulated impedance bandwidth witnesses approximately a 17-fold enhancement over the passive case. Within this -10-dB bandwidth, its maximum realized gain, radiation efficiency, and front-to-back ratio (FTBR) are, respectively, 4.00 dB, 88%, and 26.95 dB. When the anticipated actual negative impedance convertor circuits are incorporated, the impedance bandwidth still sustains more than a 10-fold enhancement. The peak realized gain, radiation efficiency, and FTBR values are, respectively, 3.74 dB, 80%, and 28.01 dB, which are very comparable to the ideal values.

A pattern-reconfigurable, low-profile, efficient, electrically small, near-field resonant parasitic (NFRP), Huygens source antenna is presented. The design incorporates both electric and magnetic NFRP elements. The electric ones are made reconfigurable by the inclusion of a set of p-i-n diodes. By arranging these electric and magnetic NFRP elements properly, a set of three Huygens sources are attained, each covering a 120 degrees sector. Pattern reconfigurability is obtained by switching the diodes on or off; it encompasses the entire 360 degrees azimuth range. A prototype was fabricated and tested. The numerical and experimental studies are in good agreement. The experimental results indicate that in each of its instantaneous states at f(0) = 1.564 GHz, the antenna provides uniform peak realized gains, front-toback ratios, and radiation efficiencies, respectively, as high as 3.55 dBi, 17.5 dB, and 84.9%, even though it is electrically small: ka = 0.92, and low profile: 0.05 lambda(0).

abstract: There is a pervasive need in the defense industry for conformal, low-profile, efficient and broadband (HF-UHF) antennas. Broadband capabilities enable shared aperture multi-function radiators, while conformal antenna profiles minimize physical damage in army applications, reduce drag and weight penalties in airborne applications and reduce the visual and RF signatures of the communication node. This dissertation is concerned with a new class of antennas called Magneto-Dielectric wire antennas (MDWA) that provide an ideal solution to this ever-present and growing need. Magneto-dielectric structures (μr>1;εr>1) can partially guide electromagnetic waves and radiate them by leaking off the structure or by scattering from any discontinuities, much like a metal antenna of the same shape. They are attractive alternatives to conventional whip and blade antennas because they can be placed conformal to a metallic ground plane without any performance penalty. A two pronged approach is taken to analyze MDWAs. In the first, antenna circuit models are derived for the prototypical dipole and loop elements that include the effects of realistic dispersive magneto-dielectric materials of construction. A material selection law results, showing that: (a) The maximum attainable efficiency is determined by a single magnetic material parameter that we term the hesitivity: Closely related to Snoek's product, it measures the maximum magnetic conductivity of the material. (b) The maximum bandwidth is obtained by placing the highest amount of μ" loss in the frequency range of operation. As a result, high radiation efficiency antennas can be obtained not only from the conventional low loss (low μ") materials but also with highly lossy materials (tan(δm)>>1). The second approach used to analyze MDWAs is through solving the Green function problem of the infinite magneto-dielectric cylinder fed by a current loop. This solution sheds light on the leaky and guided waves supported by the magneto-dielectric structure and leads to useful design rules connecting the permeability of the material to the cross sectional area of the antenna in relation to the desired frequency of operation. The Green function problem of the permeable prolate spheroidal antenna is also solved as a good approximation to a finite cylinder. / Dissertation/Thesis / Ph.D. Electrical Engineering 2013

Les dimensions d’une antenne sont inversement proportionnelles à leurs fréquences de fonctionnement. De plus, la miniaturisation d’une antenne entraîne la dégradation de ses performances électriques et de rayonnement. Par conséquent, il est important pour le concepteur de trouver un bon compromis entre le taux de miniaturisation et les performances souhaitées. L’objet de cette thèse est de proposer une antenne miniature possédant les meilleures caractéristiques possibles dans la bande UHF de la RFID (860MHz – 960MHz), facile à réaliser et à moindre coût d’industrialisation. Les travaux de cette thèse ont montré qu’un couplage magnétique d’une cellule de métamatériaux avec une demi-boucle permet d’obtenir des structures antennaires intéressantes de par leurs dimensions de l’ordre de λ0/10, leur efficacité et leur fonctionnement en multibande. Différentes techniques sont appliquées pour améliorer les performances des antennes développées à savoir le gain, la directivité et la polarisation circulaire et/ou elliptique. / Antenna dimensions are inversely proportional to their operating frequencies. Besides, the antenna miniaturization degrades its electrical and radiation performances. Therefore it is important for the antenna designer to find a good compromise between the miniaturization rate and the desired performances. The purpose of this thesis is to obtain a miniature antenna which has good characteristics in the UHF band of RFID (860MHz - 960MHz), easy to implement and with low industrialization cost. The works described in this thesis showed that a magnetic coupling of a metamaterial cell with a half loop provides interesting antennas in terms of dimensions of about λ0/10, efficiency and multiband behavior. Different techniques are applied to improve the performances of realized antennas as gain, directivity and circular and/or elliptical polarization.