No / A miniaturized conical helix antenna is presented, which displays vertical polarization with electrically small dimensions of 10mm×10mm×45mm. The resonance of the antenna is made tunable by adding a variable digital MEMS capacitor load at the bottom of the helix, giving a tuning range of 316 MHz to 400 MHz. The antenna demonstrates considerable impedance matching bandwidth and gain over the entire tuning frequency band. Most importantly, the antenna is capable of compact, flexible and easy integration into a wireless device package or for platform installation. / Datong of Seven Technology Group, for their support under the KTP project grant No. 008734.

Les antennes présentes dans la plupart des systèmes communicants comme les véhicules automobiles, les avions et les trains se multiplient et sont soumises à une contrainte d’intégration de plus en plus sévère. De nombreuses techniques de miniaturisation d’antennes existent et passent toutes par un compromis entre la taille et les performances (bande passante et/ou rendement de rayonnement). Pour les systèmes cités ci-dessus, les antennes sont souvent placées devant ou à proximité d’un réflecteur métallique (toit de véhicule, carlingue d’aéronef). Dans ce cas, l’épaisseur de système antennaire est une contrainte majeure et les métamatériaux de type Conducteur Magnétique Artificiel (CMA) ouvrent des perspectives intéressantes grâce à leurs propriétés électromagnétiques non conventionnelles. Cependant, pour les applications sub-GHz (RFID, LTE, PMR…), les CMA sont limités par les dimensions des cellules unitaires nécessaires à leur mise en œuvre (λg/4) ainsi que leur bande réduite de fonctionnement. Réduire leurs dimensions permet de rendre leur utilisation compatible avec le contexte des antennes miniatures intégrées. Ajouter l’agilité fréquentielle permet de palier le problème de la bande passante réduite dans le cas des antennes et des CMA miniaturisés en ajustant le fonctionnement du système antennaire sur une large bande passante. Cette thèse de doctorat propose d’étudier et de développer un nouveau système antennaire à faible profil composé d’une antenne miniature associée à une métasurface compacte reconfigurable en fréquence et compatible avec le standard NB-IoT dans la bande basse LTE (700 MHz – 960 MHz). / Antennas are now very integrated in several connected systems like cars, airplanes and trains. Many antenna miniaturization techniques exist and all go through a compromise between size and performance (bandwidth and/or radiation efficiency). For the systems mentioned above, the antennas are often placed near a metallic reflector (vehicle roof, aircraft cabin). Within this context, Artificial Magnetic Conductors (AMC) present an attractive reflector for low profile antennas which can take advantage of intrinsic zero reflection phase response to boost antenna performance without the need for thick quarter wave backplane. However, for sub-GHz applications (RFID, LTE, PMR ...), AMC are limited by the size of the unit cells necessary for their implementation (λg/4) as well as their reduced operating bandwidth. AMC miniaturization makes their use compatible with small antennas. Adding tunability restores the possibility of adjusting the operating frequency over a large bandwidth. This PhD thesis proposes to study and develop a new electrically small, low-profile antenna based on miniaturized and tunable AMC for the NB-IoT standard in low LTE band (700 MHz – 960 MHz).

The concept for a novel new antenna design is presented and investigated for application to ground penetrating radar (GPR). The proposed new antenna design is called the shielded magnetic bowtie antenna (MBA). As the name suggests, it is predominately constructed from a bowtie-shaped volume of magnetic material that is fed from the centre of the structure by a small magnetic loop antenna. This thesis develops the magnetic antenna concept and investigates its potential for GPR predominately through numerical modelling. However, a significant part of the investigation concentrates on validating the numerical modelling technique developed to study the shielded MBA by comparing the results with measurements obtained from a scale model constructed to operate in the watertank antenna test facility, a controlled environment for GPR antenna research. The broadband properties required for GPR antennas are achieved uniquely with the shielded MBA design by a combination of the antenna shape being defined in terms of angles and an inherent magnetic loss mechanism within the antenna material structure. The design also affords an intrinsically placed antenna shield that has the potential for mitigating problems typically experienced with shielding electric dipole antennas. Antenna shielding is an important consideration for GPR antenna designers, especially given the recent US government (FCC) changes that restrict radiated energy emissions within the regulated spectrum used by GPR systems. In addition to providing the intended directional radiation properties, the magnetic antenna shield also provides an elegant solution for a low-loss wideband balun, allowing the antenna to be effectively fed from an unbalanced coaxial transmission line. Other important aspects of the proposed design are discussed in relation to the requirements for GPR antennas. Numerical models of the magnetic antenna concept show encouraging bandwidth results. For example, from a simple comparison with an equivalent sized electric bowtie antenna model, the effective gain bandwidth of the magnetic antenna is found to be at least 3-octaves compared to approximately 2-octaves for the electric bowtie. The shielded magnetic antenna achieves a gain of approximately 2 dB, compared to 5 dB for the unshielded electric bowtie antenna. However, it is noted that the magnetic antenna models contain significantly more loss compared to the electric bowtie model. The shielded MBA design emerged from a theoretical investigation of electrically small GPR antennas, given that the initial thesis objective was to investigate ways of improving low frequency GPR antennas. In general, GPR systems are operated with electric dipole antennas, such as the electric bowtie. Interestingly, the electrically small antenna investigation revealed that only the small magnetic loop (i.e., magnetic dipole) antenna can be constructed to approach, arbitrarily closely, the fundamental bandwidth limit for small antennas. This surprising and counter intuitive result is shown to be theoretically achievable with the use of magnetic materials. For the small loop antenna, energy stored within the antenna structure can be avoided by filling the antenna sphere with a perfect magnetic material. This theoretical argument is discussed and supported by numerically modelled results. The electrically small antenna investigation presented in this thesis extends to include the influence that proximity to a lossy dielectric half-space has, on improving the antenna impedance bandwidth. This investigation is of general interest for GPR; it is performed numerically and supported by measurements conducted on an experimental loop antenna situated at various heights above the ground. These results provide support for the hypothesis that a magnetic antenna may experience less influence from near-field changes in the dielectric properties of the ground compared to the equivalent sized electric field antenna.

В работе представлены результатыисследования метода, который позволяет увеличить полосу частот электрически малой антенны с помощью “нефостеровской цепи”на основе операционного усилителя. Были получены графики, которые позволяют оценить входное реактивное сопротивление и полосу частот электрически малой антенны с представленным методом расширения полосы частот. / The paper presents the results of a study of the method, which makes it possible to increase the frequency band of an electrically small antenna by means of a "Non-foster circuit"with operational amplifier. The graphs were obtain, which allow estimating the input reactance and the bandwidth of an electrically small antenna with the method of bandwidth extension represented.

В работе представлены результатыисследования метода, который позволяет увеличить полосу частот электрически малой антенны с помощью “нефостеровской цепи”.Также были представлены классические методы расширения полосы частот антенны с помощью индуктивности и колебательного контура, чтобы сравнить их эффективность с исследуемым методом. Были получены графики, которые позволяют оценить входное реактивное сопротивление и полосу частот электрически малой антенны со всеми представленными методами расширения полосы частот. / The paper presents the results of a study of the method, which makes it possible to increase the frequency band of an electrically small antenna by means of a "Non-foster circuit". Also, classical methods for extending the frequency band of the antenna with the help of inductance and a vibrational circuit were presented to compare their effectiveness with the method being studied.

Characteristic modes (CMs) provide deep insight into the electromagnetic behaviour of any arbitrarily shaped conducting structure because the CMs are unique to the geometry of the object. We exploit this very fact by predicting a perhaps surprising number of important antenna metrics such as resonance frequency, radiation efficiency and antenna Q (bandwidth) without needing to specify a feeding location. In doing so, it is possible to define a collection of objective functions that can be used in an optimizer to shape-synthesize antennas without needing to define a feed location a priori. We denote this novel form of optimization “feedless” or “excitation-free” antenna shape synthesis. Fundamentally, we are allowing the electromagnetics to dictate how the antenna synthesis should proceed and are in no way imposing the physical constraints enforced by fixed feeding structures. This optimization technique is broadly applied to three major areas of antenna research: electrically small antennas, multi-band antennas and reflectarrays. Thus, the scope of applicability ranges from small antennas, to intermediate sizes and concludes with electrically large antenna designs, which is a testament to the broad applicability of characteristic mode theory. Another advantage of feedless electromagnetic shape synthesis is the ability to synthesize antennas whose desirable properties approach the fundamental limits imposed by electromagnetics. As an additional benefit, the feedless optimization technique is shown to have greater computational efficiency than traditional antenna optimization techniques.

Characteristic modes (CMs) provide deep insight into the electromagnetic behaviour of any arbitrarily shaped conducting structure because the CMs are unique to the geometry of the object. We exploit this very fact by predicting a perhaps surprising number of important antenna metrics such as resonance frequency, radiation efficiency and antenna Q (bandwidth) without needing to specify a feeding location. In doing so, it is possible to define a collection of objective functions that can be used in an optimizer to shape-synthesize antennas without needing to define a feed location a priori. We denote this novel form of optimization “feedless” or “excitation-free” antenna shape synthesis. Fundamentally, we are allowing the electromagnetics to dictate how the antenna synthesis should proceed and are in no way imposing the physical constraints enforced by fixed feeding structures. This optimization technique is broadly applied to three major areas of antenna research: electrically small antennas, multi-band antennas and reflectarrays. Thus, the scope of applicability ranges from small antennas, to intermediate sizes and concludes with electrically large antenna designs, which is a testament to the broad applicability of characteristic mode theory. Another advantage of feedless electromagnetic shape synthesis is the ability to synthesize antennas whose desirable properties approach the fundamental limits imposed by electromagnetics. As an additional benefit, the feedless optimization technique is shown to have greater computational efficiency than traditional antenna optimization techniques.

Ultra Wideband (UWB) communication has recently drawn considerable attention from academia and industry. This is mainly owing to the ultra high speeds and cognitive features it could offer. The employability of UWB in numerous areas including but not limited to Wireless Personal Area Networks, WPAN's, Body Area Networks, BAN's, radar and medical imaging etc. has opened several avenues of research and development. However, still there is a disagreement on the standardization of UWB. Two contesting radios for UWB are Multiband Orthogonal Frequency Division Multiplexing (MB-OFDM) and DS-UWB (Direct Sequence Ultra Wideband). As nearly all of the reported research on UWB hasbeen about a very narrow/specific area of the communication system, this thesis looks at the end-to-end performance of an MB-OFDM approach. The overall aim of this project has been to first focus on three different aspects i.e. interference, antenna and propagation aspects of an MB-OFDM system individually and then present a holistic or an end-to-end system analysis finally. In the first phase of the project the author investigated the performance of MB-OFDM system under the effect of his proposed generic or technology non-specific interference. Avoiding the conventional Gaussian approximation, the author has employed an advanced stochastic method. A total of two approaches have been presented in this phase of the project. The first approach is an indirect one which involves the Moment Generating Functions (MGF's) of the Signal-to-Interference-plus-Noise-Ratio (SINR) and the Probability Density Function (pdf) of the SINR to calculate the Average Probabilities of Error of an MB-OFDM system under the influence of proposed generic interference. This approach assumed a specific two-dimensional Poisson spatial/geometric placement of interferers around the victim MB-OFDM receiver. The second approach is a direct approach and extends the first approach by employing a wider class of generic interference. In the second phase of the work the author designed, simulated, prototyped and tested novel compact monopole planar antennas for UWB application. In this phase of the research, compact antennas for the UWB application are presented. These designs employ low-loss Rogers duroid substrates and are fed by Copla-nar Waveguides. The antennas have a proposed feed-line to the main radiating element transition region. This transition region is formed by a special step-generating function-set called the "Inverse Parabolic Step Sequence" or IPSS. These IPSS-based antennas are simulated, prototyped and then tested in the ane-choic chamber. An empirical approach, aimed to further miniaturize IPSS-based antennas, was also derived in this phase of the project. The empirical approach has been applied to derive the design of a further miniaturized antenna. More-over, an electrical miniaturization limit has been concluded for the IPSS-based antennas. The third phase of the project has investigated the effect of the indoor furnishing on the distribution of the elevation Angle-of-Arrival (AOA) of the rays at the receiver. Previously, constant distributions for the AOA of the rays in the elevation direction had been reported. This phase of the research has proposed that the AOA distribution is not fixed. It is established by the author that the indoor elevation AOA distributions depend on the discrete levels of furnishing. A joint time-angle-furnishing channel model is presented in this research phase. In addition, this phase of the thesis proposes two vectorial or any direction AOA distributions for the UWB indoor environments. Finally, the last phase of this thesis is presented. As stated earlier, the overall aim of the project has been to look at three individual aspects of an MB-OFDM system, initially, and then look at the holistic system, finally. Therefore, this final phase of the research presents an end-to-end MB-OFDM system analysis. The interference analysis of the first phase of the project is revisited to re-calculate the probability of bit error with realistic/measured path loss exponents which have been reported in the existing literature. In this method, Gaussian Quadrature Rule based approximations are computed for the average probability of bit error. Last but not the least, an end-to-end or comprehensive system equation/impulse response is presented. The proposed system equation covers more aspects of an indoor UWB system than reported in the existing literature.

Characteristic modes (CMs) provide deep insight into the electromagnetic behaviour of any arbitrarily shaped conducting structure because the CMs are unique to the geometry of the object. We exploit this very fact by predicting a perhaps surprising number of important antenna metrics such as resonance frequency, radiation efficiency and antenna Q (bandwidth) without needing to specify a feeding location. In doing so, it is possible to define a collection of objective functions that can be used in an optimizer to shape-synthesize antennas without needing to define a feed location a priori. We denote this novel form of optimization “feedless” or “excitation-free” antenna shape synthesis. Fundamentally, we are allowing the electromagnetics to dictate how the antenna synthesis should proceed and are in no way imposing the physical constraints enforced by fixed feeding structures. This optimization technique is broadly applied to three major areas of antenna research: electrically small antennas, multi-band antennas and reflectarrays. Thus, the scope of applicability ranges from small antennas, to intermediate sizes and concludes with electrically large antenna designs, which is a testament to the broad applicability of characteristic mode theory. Another advantage of feedless electromagnetic shape synthesis is the ability to synthesize antennas whose desirable properties approach the fundamental limits imposed by electromagnetics. As an additional benefit, the feedless optimization technique is shown to have greater computational efficiency than traditional antenna optimization techniques.

Antenna implants are used to establish a telemetry link to enable wireless data transfer, suitable for telemedicine and other medical applications. Inbody environments with water-based tissues lead to severe power absorption, making signal strength and radiation efficiency challenging yet central performance aspects of antenna implants. Fundamental performance limits exist regarding radiation efficiency; however, these limits consider theoretically ideal Hertzian dipoles. A semi-analytical model is used to evaluate the feasibility of previously determined fundamental bounds and the optimal dipole solution, both with respect to physical necessities of finite material conductivity and antenna size. This study uses a spherical model to represent a simplified in-body environment with various phantom compositions. Furthermore, the study focuses on implants operating within the Medical Implant Communication System (MICS) frequency band, but models and methods are not restricted to the considered frequency. The work contributes to the field of implantable antennas in several aspects; evaluating the feasibility of fundamental bounds, establishing more realistic performance limits, and determining the optimal dipole solution with respect to radiation efficiency. Other findings are presented in related areas, particularly concerning conductor loss and evaluation of the impedance for antennas inside a high-loss phantom. Moreover, the work presents a suggested method to measure electrically small magnetic dipole antennas. Methods and models are documented in a substantial theoretical derivation, and findings are verified using independent methods. Neglecting necessary antenna aspects like finite size and conductivity can lead to faulty conclusions on implant performance. Providing a more realistic performance target helps predict the performance of realistic antenna designs. Ultimately, increased knowledge of implanted antennas simplifies the design process to achieve high-performance implants. / Antennimplant används för att etablera en telemetrilänk som möjliggör trådlös dataöverföring, exempelvis användbart inom telemedicin och andra medicinska tillämpningar. Vattenbaserade kroppsmiljöer resulterar i kraftig absorption, vilket implicerar att signalstyrka samt strålningseffektivit blir utmanande men även centrala prestanda egenskaper för antennimplnatat. Det existerar fundamentala prestandabegränsningar för strålningseffektivitet, men dessa gränser är etablerade med hänsyn till teoretiskt ideala elementära dipoler. En semi-analytisk modell används för att utvärdera rimligheten av tidigare begränsningar samt den optimala dipolen, bägge med hänsyn till nödvändiga aspekter som ändlig konduktivitet och antennstorlek. Denna studie använder en sfärisk modell för att representera en simplifierad kroppslig miljö med olika vävnadskompositioner. Studien fokuserar på antennimplantat inom frekvensbandet dedikerat för Medical Implant Communication System (MICS) enheter, men modeller och metoder är typiskt inte begränsade inom omnämnt band. Arbetet bidrar till området för implanterbara antenner i flera aspekter; att utvärdera rimligheten av fundamentala gränser, fastställa mer realistiska prestandagränser samt bestämma den optimala dipolen med avseende på strålningseffektivitet. Andra resultat presenteras inom relaterade aspekter som metallförlust och utvärdering av en antenns last eller ingångs impedans inuti sfäriska och kroppsliga miljöer. Dessutom presenteras en metod för att mäta elektriskt små magnetiska dipoler. Metoder och modeller är dokumenterade eller demonstrerade via härledning, och centrala resultat har verifieras med oberoende metoder. Att förbise nödvändiga aspekter som ändlig storlek och konduktivitet kan leda till felaktiga slutsatser gällande prestanda. Däremot, att fastställa en mer realistisk gräns bidrar till att förutsäga prestandan i realistiska tillämpningar. I slutändan så resulterar ökad kunskap i en simplifierad designprocess som underlättar i strävan till att uppnå högpresterande antennimplantat.