A new sensor technology based on optical diffraction of visible light shows promise for sensing metal ions and other species that employ chemically-responsive metal oxide and conducting polymer grating elements. These materials undergo reversible redox processes upon interaction with a chemical analyte that subsequently induces changes in the materials refractive index. The two key design parameters of this sensing technique involve preparation of micropatterned sensor elements and the evaluation of appropriate wavelengths for detection of diffracted light. Much of the ability to “tune” a desired sensing response is dictated by the understanding of how factors of size, dimension, crystallinity, morphology, porosity, and heterogeneity influence analyte/sensor interactions (i.e., adsorption, binding, and transport). The effect of composition, structure, and morphology of MoO₃, WO₃, Moₓ W₁₋ₓO₃, IrOₓ and polyaniline grating materials on chemical, electrochemical and optical properties of these systems will be examined by a range of spectroscopic and electrochemical techniques. Comprehensive evaluation and correlation of materials’ optical properties to diffraction-based detection will advance understanding of the capabilities and limitations for the diffraction-based sensing methodology. This information can then used to determine optimal sensing parameters to improve detection limits, enhance sensitivity and increase the dynamic range for detection of model analytes. / text

2,3-Dihydro-5-(10-(2,3-dihydrothieno[3,4-b][1,4]dioxin-5-yl)anthracen-9-yl)thieno [3,4-b][1,4]dioxine (DTAT) was synthesized via linking 3,4-ethylenedioxy thiophene (EDOT) on anthracene by Stille coupling. Homopolymer P(DTAT) was achieved by electrochemical techniques. The polymer, P(DTAT) was electrosynthesized by anodic oxidation of the corresponding monomer in the presence of 0.1 M LiClO4 as the supporting electrolyte in acetonitrile (ACN) solution. Copolymer of DTAT in the presence of EDOT was synthesized via potentiodynamic method in ACN/LiClO4 (0.1 M) solvent-electrolyte couple. Structural characterizations of the sample was carried out via 1H-Nuclear Magnetic Resonance (NMR) and Fourier Transform Infrared Spectroscopy (FTIR). Electrochemical behaviors of the monomer and polymers were determined by Cyclic Voltammetry (CV). Electrochromic and spectroelectrochemical behavior of the polymers were investigated on ITO glass electrode, and their ability of employment in device construction was examined. Spectroelectrochemistry analysis of P(DTAT) revealed an electronic transition at 505 nm corresponding to &amp / #960 / -&amp / #960 / * transition with a band gap of 1.57 eV. In order to investigate electronic structure of the copolymers obtained by different applied potentials, spectroelectrochemistry studies were performed. Electrochromic investigations showed that P(DTAT) switches between yellow and blue while P(DTAT-co-EDOT) was found to be multichromic, switching between claret red neutral state, a gray and a red intermediate state, and a blue oxidized state. Switching time of the polymers was evaluated by a kinetic study upon measuring the percent transmittance (%T) at the maximum contrast point. Dual type polymer electrochromic devices (ECDs) based on P(DTAT-co-EDOT) with poly(3,4-ethylenedioxythiophene) (PEDOT) were constructed. Spectroelectrochemistry and electrochromic switching of the device was studied. They were found to have good switching times and reasonable contrasts.

A new polythiophene derivative, poly-2,3-bis(4-tert-butylphenyl)-5,8-bis(4-hexylthiophen-2-yl)quinoxaline PHTQ was synthesized by both chemical and electrochemical polymerization and its electrochemical properties were reported. The monomer was electrochemically polymerized in the presence of tetrabutylammonium hexafluorophosphate(TBAPF6) as the supporting electrolyte in dichloromethane-acetonitrile (5:95, v:v). Nuclear magnetic resonance spectroscopy (1H-NMR, 13C-NMR) was utilized for the characterization of the monomer and the soluble polymer. The polymer was further characterized by Gel Permeation Chromatography (GPC). Spectroelectrochemistry and switching ability of the polymer were investigated by UV&ndash / vis spectrophotometer and cyclic voltammetry. The polymer revealed three distinctive colors upon doping which indicated that the polymer is multichromic. Tert-butyl group on the pendant phenyl rings and hexyl groups on thiophene enhanced the solution processability of the electrochromic polymer. The electrochemical and spectral properties of the chemically synthesized polymer were investigated via spray coating on ITO glass slides. Electrochemical copolymerization of 2,3-bis(4-tert-butylphenyl)-5,8-bis(4-hexylthiophen-2-yl) quinoxaline (HTQ) with 3,4-ethylenedioxythiophene(EDOT) was performed to fulfill a strategy in achieving fine-tuned electrochromic properties. The copolymer, P(HTQ-co-EDOT) was characterized via detailed studies of cyclic voltammetry and spectroelectrochemistry. Band gap (Eg) of the copolymer was calculated as 1.4 eV and showed 34 % optical contrast with switching times less than 1 second.

<p> In an era of advancing printed electronics, solution-processable organic semiconductors continue to make significant strides in electronic and optoelectronic applications. Electrochromic (EC) technology, which encompass reversible optical modulation under electrochemical biasing, has progressed rapidly over the past half-century and developed into niche commercial-scale devices for auto-tinting glasses as well as low-power, non-emissive displays. To utilize the advantages of organic electrochromic materials in next-generation devices, it is imperative to understand their fundamental material properties, interactions with other device components, and the underlying electrochemistry that governs the overall optical and electrochemical response of the complete electrochromic device. This dissertation presents a discussion on the synergistic role of organic electrochromes, charge-balancing layers and electrolytes in determining two key performance metrics, namely the optical contrast and operational stability, of an electrochromic device (ECD). The absorption features of colored-to-transmissive switching conjugated polymers have been investigated by exploring material design strategies in conjunction with analytical approaches to optimize and enhance the optical contrast. In parallel, transmissive redox-active radical polymer counter electrodes have been developed as compatible charge-balancing layers and integrated into devices by pairing with electrochromic polymers (ECPs) to achieve stable and high-contrast optical modulation. Electrochemical activity of both conjugated and radical polymer electrodes in different ionic and solvent environments have been further examined to understand material-electrolyte interactions governing mixed ionic-electronic conduction. Finally, a small molecular approach to realizing transparent-to-colored electrochromism is discussed, where distinct substituent-induced degradation pathways of conjugated radical cations were revealed. Overall, this research aims to assist future development of robust, ultra-high contrast organic electrochromic platforms.  </p>