Global ETD Search

1	Detector cell hydrodynamics and electrode selectivity in flow-injection potentiometry O'Connell, Gregory Raymond January 1990 (has links) No description available. 541 Electrode theory
2	Generalized Homogenization Theory and its Application to Porous Rechargeable Lithium-ion Batteries Juan Campos (9193691) 12 October 2021 (has links) <p>A thermodynamically consistent coarsed-grained phase field model was developed to find the conditions under which a heterogeneous porous electrode can be treated as homogeneous in the description of Lithium-ions in rechargeable batteries. Four regimes of behavior under which the transport phenomena can be homogenized to describe porous LIBs were identied: regime (a), where the model is inaccurate, for physically accessible particle packings of aspect ratios smaller than c/a = 0.5 and electrode porosities between 0.34 to 0.45; regime (b), where the model is valid, for particles of aspect ratios greater than c/a = 0.7 and electrode porosities greater than 0.35; regime (c), where the model is valid, but the microstructures are physically inaccessible, and correspond to particles with aspect ratios greater than c/a = 0.7 and electrode porosities smaller than 0.34; and regime (d), where the model is invalid and the porous microstructures are physically inaccessible, and correspond to particles with aspect ratios smaller than c/a = 1 and electrode porosities smaller than 0.34.</p> <p>The developed formulation was applied to the graphite \| LixNi1/3Mn1/3Co1/3O2 system to analyze the effect of microstructure and coarsed-grained long-range chemomechanical effects on the electrochemical behavior. Specically, quantiable lithium distribution populations in the cathode, as a result of long range interactions of the diffuse interface, charge effects and mechanical stresses were identified: i) diffusion limited population due to negligible composition gradients, ii) stress-induced population as a result of chemically induced stresses, and iii) lithiation-induced population, as a consequence of the electrochemical potential gradients.</p> lithium-ion batteries Homogenization theory Porous Electrode Theory Rechargeable Batteries Modeling Phase field simulations coarse-grained models
3	Modeling and Analysis for Atmospheric Galvanic Corrosion of Fasteners in Aluminum Young, Paul S. 29 May 2015 (has links) No description available. Aerospace Engineering Aerospace Materials Chemical Engineering Engineering Materials Science Metallurgy Naval Engineering Science Education
4	Physics-Based Modeling of Degradation in Lithium Ion Batteries Surya Mitra Ayalasomayajula (5930522) 03 October 2023 (has links) <h4>A generalized physics-based modeling framework is presented to analyze: (a) the effects of temperature on identified degradation mechanisms, (b) interfacial debonding processes, including deterministic and stochastic mechanisms, and (c) establishing model performance benchmarks of electrochemical porous electrode theory models, as a necessary stepping stone to perform valid battery degradation analyses and designs. Specifically, the effects of temperature were incorporated into a physics-based, reduced-order model and extended for a LiCoO<sub>2</sub> -graphite 18650 cell. Three dimensionless driving forces were identified, controlling the temperature-dependent reversible charge capacity. The identified temperature-dependent irreversible mechanisms include homogeneous SEI, at moderate to high temperatures, and the chemomechanical degradation of the cathode at low temperatures. Also, debonding of a statistically representative electrochemically active particle from the surrounding binder-electrolyte matrix in a porous electrode was modeled analytically, for the first time. The proposed framework enables to determine the space of C-Rates and electrode particle radii that suppresses or enhances debonding and is graphically summarized into performance–microstructure maps where four debonding mechanisms were identified, and condensed into power-law relations with respect to the particle radius. Finally, in order to incorporate existing or emerging degradation models into porous electrode theory (PET) implementations, a set of benchmarks were proposed to establish a common basis to assess their physical reaches, limitations, and accuracy. Three open source models: dualfoil, MPET, and LIONSIMBA were compared, exhibiting significant qualitative differences, despite showing the same macroscopic voltage response, leading the user to different conclusions regarding the battery performance and possible degradation mechanisms of the analyzed system.</h4> Electrical energy storage Functional materials Lithium ion battery reduced order model (ROM) sei degradation chemomechanical failure Temperature dependent degradation battery management system design Battery thermal model battery decrepitation battery modeling interfacial debonding statistical failure Weibull debonding Porous Electrode Theory electrochemical modeling performance benchmarks
5	Mathematical modelling of primary alkaline batteries Johansen, Jonathan Frederick January 2007 (has links) Three mathematical models, two of primary alkaline battery cathode discharge, and one of primary alkaline battery discharge, are developed, presented, solved and investigated in this thesis. The primary aim of this work is to improve our understanding of the complex, interrelated and nonlinear processes that occur within primary alkaline batteries during discharge. We use perturbation techniques and Laplace transforms to analyse and simplify an existing model of primary alkaline battery cathode under galvanostatic discharge. The process highlights key phenomena, and removes those phenomena that have very little effect on discharge from the model. We find that electrolyte variation within Electrolytic Manganese Dioxide (EMD) particles is negligible, but proton diffusion within EMD crystals is important. The simplification process results in a significant reduction in the number of model equations, and greatly decreases the computational overhead of the numerical simulation software. In addition, the model results based on this simplified framework compare well with available experimental data. The second model of the primary alkaline battery cathode discharge simulates step potential electrochemical spectroscopy discharges, and is used to improve our understanding of the multi-reaction nature of the reduction of EMD. We find that a single-reaction framework is able to simulate multi-reaction behaviour through the use of a nonlinear ion-ion interaction term. The third model simulates the full primary alkaline battery system, and accounts for the precipitation of zinc oxide within the separator (and other regions), and subsequent internal short circuit through this phase. It was found that an internal short circuit is created at the beginning of discharge, and this self-discharge may be exacerbated by discharging the cell intermittently. We find that using a thicker separator paper is a very effective way of minimising self-discharge behaviour. The equations describing the three models are solved numerically in MATLABR, using three pieces of numerical simulation software. They provide a flexible and powerful set of primary alkaline battery discharge prediction tools, that leverage the simplified model framework, allowing them to be easily run on a desktop PC. advection anode asymptotic analysis BET surface area binary electrolyte boundary condition Butler-Volmer equation cathode closed circuit voltage concentration polarisation control volume current path discretisation diffusion electrochemical reaction electrode electrolytic manganese dioxide EMD crystals EMD particles exchange current density geometric surface area initial condition linearisation macrohomogeneous porous electrode theory mathematical model Nernst equation ohmic losses open circuit voltage ordinary differential equation overpotential partial differential equation perturbation techniques potassium hydroxide potassium zincate precipitation reaction primary battery separator paper simulation ternary electrolyte theoretical capacity utilisation zinc zinc oxide

1

Page generated in 0.0688 seconds