Main reason for the current losses in electrolytic magnesium production is the reaction between electrode products. Present study was devoted to effective separation of chlorine gas from the electrolysis environment by a new cell design and thus reducing the extent of back reaction between magnesium and chlorine to decrease energy consumption values. The new cell design was tested by changing temperature, cathode surface, current density, anode cathode distance and electrolyte composition. Both the voltages and the current efficiencies were considered to be influenced by the amount and hydrodynamics of chlorine bubbles in inter-electrode region. Cell voltages were also found to be affected from the nucleation of magnesium droplets and changes in electrolyte composition that took place during the electrolysis. A hydrodynamic model was used to calculate net cell voltage by including the resistance of chlorine bubbles on anode surface to theoretical decomposition voltage during electrolysis. Good correlations were obtained between experimental and calculated voltages. The same model was used to calculate current efficiencies by considering chlorine diffusion from bubble surfaces. A general agreement was obtained between calculated and experimental current efficiencies. Desired magnesium deposition morphology and detachment characteristics from cathode were obtained when MgCl2-NaCl-KCl-CaCl2 electrolytes were employed. Current efficiencies higher than 90% could be achieved using the above electrolyte. The cell consumes around 8 kWh&amp / #903 / kg-1 Mg at 0.43 A&amp / #903 / cm-2 as a result of high chlorine removal efficiency and capability of working at low inter-electrode distances. Furthermore, the cell was capable of producing magnesium with less than the lowest energy consumption industrially obtained, at about double the commonly practiced industrial current density levels.

A monomer, 4-(2,5-di(thiophen-2-yl)-1H-pyrrol-1-yl) benzenamine (SNS-NH2), was synthesized via the reaction of 1,4-di(2-thienyl)-1,4-butanedione with benzene-1,4-diamine. Chemical polymerization of the monomer yielded a polymer which was completely soluble in organic solvents. The chemical structures of both the monomer and the polymer were characterized by Nuclear Magnetic Resonance Spectroscopy (1H-NMR and 13C-NMR) and Fourier Transform Infrared (FTIR) Spectroscopy. The average molecular weight of the chemically synthesized polymer was determined by Gel Permeation Chromatography (GPC) as Mn = 2.2x103 g/mol. The electrochemical oxidative polymerization of SNS-NH2 was carried out via potentiodynamic electrolysis in the presence of LiClO4, NaClO4 (1:1) supporting electrolyte in acetonitrile. Electrochemical copolymerization of SNS-NH2 in the presence of 3,4-ethylenedioxythiophene (EDOT) was achieved in acetonitrile (ACN) / NaClO4/LiClO4 (0.1M) solvent-electrolyte couple via potentiodynamic electrolysis. Conductivities of samples were measured by four probe technique. Cyclic Voltammetry (CV) and Ultraviolet&ndash / Visible Spectroscopy were used to investigate electrochemical behavior of the monomer and redox reactions of conducting polymers. Surface morphologies of the polymer films were investigated by Scanning Electron Microscope (SEM). Second part of the study was devoted to investigate the one of most interesting property of conducting polymers, the ability to switch reversibly between the two states of different optical properties, &lsquo / electrochromism&rsquo / . The electrochromic properties of the conducting polymers were investigated via spectroelectrochemistry, kinetic and colorimetry studies. Spectroelectrochemistry analysis of homopolymer, P(SNS-NH2), reflected electronic transitions at 376 and 650 nm indicating &amp / #960 / -&amp / #960 / * transition and polaron band formation respectively. The polymer has an electronic bandgap of 2.12 eV with a yellow color in the fully reduced form and a blue color in the fully oxidized form. Switching ability of the homopolymer was evaluated by kinetic studies upon measuring the % transmittance as 20.7 % at the maximum contrast point. The spectroelectrochemical behavior of the P(SNS-NH2-co-EDOT) compare to that of the homopolymer revealed solid evidence of copolymerization based upon the differences in the spectral signatures. Copolymer revealed multichromic property with five different colors at different applied potentials. Colorimetry studies for P(SNS-NH2-co-EDOT) proved that it is possible to provide fine tuning of these colors by varying applied potential during synthesis. The results of colorimetry, spectroelectrochemistry and FTIR studies showed the possible control of the color of the electrochromic material in a predictable, controlled and reproducible manner. As the last part of the study, dual-type complementary colored electrochromic devices (ECD) using P(SNS-NH2) and P(SNS-NH2-co-EDOT)/poly(3,4-ethylenedioxythiophene) (PEDOT) in sandwich configuration were constructed and evaluated. Spectroelectrochemistry, electrochromic switching and open circuit stability of the devices were investigated by UV-Vis Spectrophotometer and Cyclic Voltammetry. They have shown to possess good switching times, reasonable contrasts and high stabilities.

A new polythiophene derivative, poly-2,3-bis(4-tert-butylphenyl)-5,8-bis(4-hexylthiophen-2-yl)quinoxaline PHTQ was synthesized by both chemical and electrochemical polymerization and its electrochemical properties were reported. The monomer was electrochemically polymerized in the presence of tetrabutylammonium hexafluorophosphate(TBAPF6) as the supporting electrolyte in dichloromethane-acetonitrile (5:95, v:v). Nuclear magnetic resonance spectroscopy (1H-NMR, 13C-NMR) was utilized for the characterization of the monomer and the soluble polymer. The polymer was further characterized by Gel Permeation Chromatography (GPC). Spectroelectrochemistry and switching ability of the polymer were investigated by UV&ndash / vis spectrophotometer and cyclic voltammetry. The polymer revealed three distinctive colors upon doping which indicated that the polymer is multichromic. Tert-butyl group on the pendant phenyl rings and hexyl groups on thiophene enhanced the solution processability of the electrochromic polymer. The electrochemical and spectral properties of the chemically synthesized polymer were investigated via spray coating on ITO glass slides. Electrochemical copolymerization of 2,3-bis(4-tert-butylphenyl)-5,8-bis(4-hexylthiophen-2-yl) quinoxaline (HTQ) with 3,4-ethylenedioxythiophene(EDOT) was performed to fulfill a strategy in achieving fine-tuned electrochromic properties. The copolymer, P(HTQ-co-EDOT) was characterized via detailed studies of cyclic voltammetry and spectroelectrochemistry. Band gap (Eg) of the copolymer was calculated as 1.4 eV and showed 34 % optical contrast with switching times less than 1 second.

Organic semi-conductors are of great interest since these compounds can be utilized as active layers in many device applications such as ECDs, LEDs and solar cells. Incorporating the benzotriazole units into the polymer backbone enhances the optical properties of donor units. Hexyl thiophene and pyrrole are commonly used as electron donor materials. Benzotriazole can be coupled to hexyl thiophene or pyrrole to yield materials which can be polymerized to give donor acceptor type polymers. These materials are promising components in fast switching polymeric electrochromic devices and highly efficient photovoltaic devices. During thesis studies,poly(2-dodecyl-4,7-bis(4-hexylthiophen-2-yl)-2H-benzo[d][1,2,3]triazole) (PHTBT) and poly(2-dodecyl-4,7-di(1H-pyrrol-2-yl)- 2H- benzo [d] [1,2,3] triazole) (PPyBT) will be synthesized via N-alkylation, bromination, stannylation and Stille coupling reactions. Electrochromic and photovoltaic properties of the polymers will be investigated in detail.

Over the last decade, immobilization of proteins onto inorganic materials is becoming more crucial to extend a deep understanding of interaction between proteins and nanoparticles. With understanding of the real interaction lying under the protein-nanoparticle relations, it is possible to organize the conformation and orientation of surface and framework species of nanoparticles to generate ideal surfaces for potential biotechnological applications. Due to their unique properties such as large clean surface, tunable surface properties, adjustable surface charge, and dispersibility in aqueous solutions, zeolite and zeo-type materials are one of the remarkable classes of inorganic materials that are widely studied in the literature. These properties make zeolites promising alternative candidates for the immobilization of enzymes and incorporation into biosensing devices. In the current study, a new approach was developed for direct determination of urea, glucose, and butyrylcholine where zeolites were incorporated to the electrode surfaces of a conductometric biosensor and Ion Sensitive Field Effect Transistors were used to immobilize the enzymes. Biosensor responses, operational stabilities, and storage stabilities of the new approach were compared with results obtained from the standard membrane methods for the same measurements. For this purpose, different surface modification technique, which are simply named as Zeolite Modified Transducers (ZMTs) were compared with Standard Membrane Transducers (SMTs). During the conductometric measurements ZMT electrodes were used, which allowed the direct evaluation of the effect of zeolite morphology on the biosensor responses for the first time. It was seen that silicalite added electrodes lead to increased performances with respect to SMTs. As a result, the zeolite modified urea and glucose biosensors were successfully applied for detecting urea and glucose, which can offer improved possibilities to design biosensors. The results obtained show that zeolites could be used as alternatives for enzyme immobilization in conductometric biosensors development. Furthermore, the sensitivities of urease and butyrylcholinesterase biosensors, prepared by the incorporation of zeolite Beta crystals with varying acidity on the surface of pH-sensitive

The Department of Energy and the Idaho National Laboratory are developing a Next Generation Nuclear Plant (NGNP) to serve as a demonstration of state-of-the-art nuclear technology. The purpose of the demonstration is two fold: 1) efficient low cost energy generation and 2) hydrogen production. Although a next generation plant could be developed as a single-purpose facility, early designs are expected to be dual-purpose. While hydrogen production and advanced energy cycles are still in their early stages of development, research towards coupling a high temperature reactor, electrical generation and hydrogen production is under way. Many aspects of the NGNP must be researched and developed to make recommendations on the final design of the plant. Parameters such as working conditions, cycle components, working fluids, and power conversion unit configurations must be understood. Three configurations of the power conversion unit were modeled using the process code HYSYS; a three-shaft design with 3 turbines and 4 compressors, a combined cycle with a Brayton top cycle and a Rankine bottoming cycle, and a reheated cycle with 3 stages of reheat were investigated. A high temperature steam electrolysis hydrogen production plant was coupled to the reactor and power conversion unit by means of an intermediate heat transport loop. Helium, CO2, and an 80% nitrogen, 20% helium mixture (by weight) were studied to determine the best working fluid in terms cycle efficiency and development cost. In each of these configurations the relative heat exchanger size and turbomachinery work were estimated for the different working fluids. Parametric studies away from the baseline values of the three-shaft and combined cycles were performed to determine the effect of varying conditions in the cycle. Recommendations on the optimal working fluid for each configuration were made. The helium working fluid produced the highest overall plant efficiency for the three-shaft and reheat cycle; however, the nitrogen-helium mixture produced similar efficiency with smaller component sizes. The CO2 working fluid is recommend in the combined cycle configuration.

Hydrogen is a good candidate as a future energy source. Current technologies generate hydrogen from hydrocarbons as mixtures with other species like CO and CO₂. High flux and resistance to contaminants are required for membranes used to separate hydrogen from these mixtures, as well as other requirements such as long operation standard and low cost. Development of new membranes is hampered by the large effort and time required to experimentally develop and test these membranes. I show how first-principles Density Functional Theory (DFT) calculations combined with coarse-grained modeling can be used to predict the performance of metal alloys as H₂ purification membranes. I introduce quantitative modeling methods based on DFT calculations that assess the relative role of surface resistances for metal alloy membranes, the bulk permeation rate through alloy membranes, and the selectivity of metal membranes. In my study, I first examined the importance of surface processes for thin membranes. The possibility of using new materials such as PdCuAg ternary alloys and metal sulfides as hydrogen purification membranes were examined. Finally I predicted the absorption and diffusion of another atomic species, carbon, in the membranes. My methods require no experimental input apart from the knowledge of the bulk crystal structure, so they provide an alternate way to explore new materials as hydrogen purification membranes. My results will be a useful guide for future experimental studies.

<p>The production of chlorate, chlorine and sodium hydroxiderelies heavily on electrical energy, so that savings in thisarea are always a pertinent issue. This can be brought aboutthrough increased mass transfer of reacting species to therespective electrodes, and through increased catalytic activityand uniformity of current density distribution at theseelectrodes. This thesis will present studies involvingmathematical modelling and experimental investigations of theseprocesses. They will show the effect that hydrodynamicbehaviour has on the total current density and cell voltages,along with the effects on current density distributions andindividual overpotentials atthe respective electrodes.</p><p>Primary, secondary and psuedo-tertiary current densitydistribution models of a chlor-alkali anode are presented anddiscussed. It is shown that the secondary model presentsresults rather similar to the pseudo-tertiary model, when thecurrent density distribution is investigated, although thepotential distribution differs rather markedly. Furthermore, itis seen that an adequate description of the hydrodynamicsaround the anode is required if the potential distribution, andthereby the prevalence of side-reactions, is to be reasonablepredicted.</p><p>A rigorous tertiary current density distribution model ofthe chlorate cell is also presented, which takes into accountthe developing hydrodynamic behaviour along the height of thecell. This shows that an increased flowrate gives more uniformcurrent density distributions. This is due to the fact that theincreased vertical flowrate of electrolyte replenishes ioncontent at the electrode surfaces, thus reducing concentrationoverpotentials. Furthermore, results from the model lead to theconclusion that it is the hypochlorite ion that partakes in themajor oxygen producing side-reaction.</p><p>A real-scale cross-section of a segmented anode-cathode pairfrom a chlorate cell was designed and built in order to studythe current density distribution in industrial conditions.These experiments showed that increased flowrate brought aboutmore even current density distributions, reduced cell voltageand increased the total current density. An investigation ofthe hydrodynamic effects on the respective electrodeoverpotentials shows the anode reactions being more favoured byincreased flowrate. This leads to the conclusion that theuniform current density distribution, caused by increasedflowrate, occurs primarily through decreasing the concentrationoverpotential at the anode rather than by decreasing thebubble-induced ohmic drop at the cathode.</p><p>Finally, results from experiments investigating thebubble-induced free convection from a small electrochemicalcell are presented. These experiments show that Laser DopplerVelocimetry is the most effective instrument for investigatingthe velocity profiles in bubble-containing electrochemicalsystems. The results also show that the flow can transform fromlaminar to turbulent behaviour on both the vertical andhorizontal planes, in electrochemical systems where bubbles areevolved.</p>

No description available.

The ultimate goal of this study is to examine the feasibility of extracting silicon from silica through electrolysis. The objective of the thesis was to evaluate the physico-chemical properties of a cryolite-lithium fluoride mixture as an electrolyte for the electrolysis process. A study of 86.2wt%Cryolite and13.8wt%Lithium fluoride melt with silica concentration varying from 0-4wt% and temperature range of 900-1000°C was done. Three properties were measured using two sets of experiments: 1) Dissolution Behaviour Determination, to obtain a) solubility limit, b) dissolution rate (mass transfer coefficient) and 2) density using Archimedes’ Principle. The study concluded that solubility and dissolution rate increases with temperature and the addition of LiF to cryolite decreases the solubility limit but increases the rate at which silica dissolves into the melt. With addition of silica, the apparent density of electrolyte first increases up to 2-3wt% and the drops.