The integration of mixed-signal systems has long been a problem in the semiconductor industry. CMOS System-on-Chip (SOC), the traditional means for integration, fails mixed-signal systems on two fronts; the lack of on-chip passives with high quality (Q) factors inhibits the design of completely integrated wireless circuits, and the noise coupling from digital to analog circuitry through the conductive silicon substrate degrades the performance of the analog circuits. Advancements in semiconductor packaging have resulted in a second option for integration, the System-On-Package (SOP) approach. Unlike SOC where the package exists just for the thermal and mechanical protection of the ICs, SOP provides for an increase in the functionality of the IC package by supporting multiple chips and embedded passives. However, integration at the package level also comes with its set of hurdles, with significant research required in areas like design of circuits using embedded passives and isolation of noise between analog and digital sub-systems. A novel multiband balun topology has been developed, providing concurrent operation at multiple frequency bands. The design of compact wideband baluns has been proposed as an extension of this theory. As proof-of-concept devices, both singleband and wideband baluns have been fabricated on Liquid Crystalline Polymer (LCP) based organic substrates. A novel passive-Q based optimization methodology has been developed for chip-package co-design of CMOS Low Noise Amplifiers (LNA). To implement these LNAs in a mixed-signal environment, a novel Electromagnetic Band Gap (EBG) based isolation scheme has also been employed. The key contributions of this work are thus the development of novel RF circuit topologies utilizing embedded passives, and an advancement in the understanding and suppression of signal coupling mechanisms in mixed-signal SOP-based systems. The former will result in compact and highly integrated solutions for RF front-ends, while the latter is expected to have a significant impact in the integration of these communication devices with high performance computing.

abstract: High Impedance Surfaces (HISs), which have been investigated extensively, have proven to be very efficient ground planes for low profile antenna applications due to their unique reflection phase characteristics. Another emerging research field among the microwave and antenna technologies is the design of flexible antennas and microwave circuits to be utilized in conformal applications. The combination of those two research topics gives birth to a third one, namely the design of Conformal or Flexible HISs (FHISs), which is the main subject of this dissertation. The problems associated with the FHISs are twofold: characterization and physical realization. The characterization involves the analysis of scattering properties of FHISs in the presence of plane wave and localized sources. For this purpose, an approximate analytical method is developed to characterize the reflection properties of a cylindrically curved FHIS. The effects of curvature on the reflection phase of the curved FHISs are examined. Furthermore, the effects of different types of currents, specifically the ones inherent to finite sized periodic structures, on the reflection phase characteristics are observed. After the reflection phase characterization of curved HISs, the performance of dipole antennas located in close proximity to a curved HIS are investigated, and the results are compared with the flat case. Different types of resonances that may occur for such a low-profile antenna application are discussed. The effects of curvature on the radiation performance of antennas are examined. Commercially available flexible materials are relatively thin which degrades the bandwidth of HISs. Another practical aspect, which is related to the substrate thickness, is the compactness of the surface. Because of the design limitations of conventional HISs, it is not possible to miniaturize the HIS and increase the bandwidth, simultaneously. To overcome this drawback, a novel HIS is proposed with a periodically perforated ground plane. Copper plated through holes are extremely vulnerable to bending and should be avoided at the bending parts of flexible circuits. Fortunately, if designed properly, the perforations on the ground plane may result in suppression of surface waves. Hence, metallic posts can be eliminated without hindering the surface wave suppression properties of HISs. / Dissertation/Thesis / Ph.D. Electrical Engineering 2013

The thesis deals with linearly polarized dielectric rectangular resonator antenna (DRA) operating in the basic mode TEy11 and higher order mode TEy131 at f0 = 10GHz surrounded by an electromagnetic band gap structure (EBG). The dielectric resonator antennas, the EBG structure were designed and a method of integration of both components was developed. The simulated results show a significant improvement of the radiation pattern in the E-plane radiation pattern (narrower main beam, lower level of side lobes, higher directivity) in comparison to a conventional DRA. This was verified by the TEy11 measurement.

The main objective of this research is to design, model and implement several antenna geometries using electromagnetic band gap (EBG) material and a defected ground plane. Several antenna applications are addressed with the aim of improving performance, particularly the mutual coupling between the elements. The EBG structures have the unique capability to prevent or assist the propagation of electromagnetic waves in a specific band of frequencies, and have been incorporated here in antenna structures to improve patterns and reduce mutual coupling in multielement arrays. A neutralization technique and defected ground plane structures have also been investigated as alternative approaches, and may be more practical in real applications. A new Uni-planar Compact EBG (UC-EBG) formed from a compact unit cell was presented, giving a stop band in the 2.4 GHz WLAN range. Dual band forms of the neutralization and defected ground plane techniques have also been developed and measured. The recorded results for all antenna configurations show good improvement in terms of the mutual coupling effect. The MIMO antenna performance with EBG, neutralization and defected ground of several wireless communication applications were analysed and evaluated. The correlation coefficient, total active reflection coefficient (TARC), channel capacity and capacity loss of the array antenna were computed and the results compared to measurements with good agreement. In addition, a computational method combining Genetic Algorithm (GA) with surface meshing code for the analysis of a 2×2 antenna arrays on EBG was developed. Here the impedance matrix resulting from the meshing analysis is manipulated by the GA process in order to find the optimal antenna and EBG operated at 2.4 GHz with the goal of targeting a specific fitness function. Furthermore, an investigation of GA on 2×2 printed slot on DGS was also done.

This thesis introduces efficient numerical techniques for the analysis of novel electromagnetic metamaterials. The modelling is based on a Method of Moments modal analysis in conjunction with an interpolation scheme, which significantly accelerates the computations. Triangular basis functions are used that allow for modelling of arbitrary shaped metallic elements. Unlike the conventional methods, impedance interpolation is applied to derive the dispersion characteristics of planar periodic structures. With these techniques, the plane wave and the surface wave responses of fractal structures have been studied by means of transmission coefficients and dispersion diagrams. The multiband properties and the compactness of the proposed structures are presented. Based on this method, novel planar left-handed metamaterials are also proposed. Verifications of the left-handedness are presented by means of full wave simulation of finite planar arrays using commercial software and lab measurement. The structures are simple, readily scalable to higher frequencies and compatible with low-cost fabrication techniques.

With increase in frequency and convergence toward mixed signal systems, supplying stable voltages to integrated circuits and blocking noise coupling in the systems are major problems. Electromagnetic band gap (EBG) structures have been in the limelight for power/ground noise isolation in mixed signal applications due to their capability to suppress unwanted electromagnetic mode transmission in certain frequency bands. The EBG structures have proven effective in isolating the power/ground noise in systems that use a common power supply. However, while the EBG structures have the potential to present many advantages in noise suppression applications, there is no method in the prior art that enables reliable and efficient synthesis of these EBG structures. Therefore, in this research, a novel EBG synthesis method for mixed signal applications is presented. For one-dimensional periodic structures, three new approaches such as current path approximation method, border to border radius, power loss method have been introduced and combined for synthesis. For two-dimensional EBG structures, a novel EBG synthesis method using genetic algorithm (GA) has been presented. In this method, genetic algorithm (GA) is utilized as a solution-searching technique. Synthesis procedure has been automated by combining GA with multilayer finite-difference method and dispersion diagram analysis method. As a real application for EBG structures, EBG structures have been applied to a GHz ADC load board design for power/ground noise suppression.

The main objective of this research is to design, model and implement several antenna geometries using electromagnetic band gap (EBG) material and a defected ground plane. Several antenna applications are addressed with the aim of improving performance, particularly the mutual coupling between the elements. The EBG structures have the unique capability to prevent or assist the propagation of electromagnetic waves in a specific band of frequencies, and have been incorporated here in antenna structures to improve patterns and reduce mutual coupling in multielement arrays. A neutralization technique and defected ground plane structures have also been investigated as alternative approaches, and may be more practical in real applications. A new Uni-planar Compact EBG (UC-EBG) formed from a compact unit cell was presented, giving a stop band in the 2.4 GHz WLAN range. Dual band forms of the neutralization and defected ground plane techniques have also been developed and measured. The recorded results for all antenna configurations show good improvement in terms of the mutual coupling effect. The MIMO antenna performance with EBG, neutralization and defected ground of several wireless communication applications were analysed and evaluated. The correlation coefficient, total active reflection coefficient (TARC), channel capacity and capacity loss of the array antenna were computed and the results compared to measurements with good agreement. In addition, a computational method combining Genetic Algorithm (GA) with surface meshing code for the analysis of a 2×2 antenna arrays on EBG was developed. Here the impedance matrix resulting from the meshing analysis is manipulated by the GA process in order to find the optimal antenna and EBG operated at 2.4 GHz with the goal of targeting a specific fitness function. Furthermore, an investigation of GA on 2×2 printed slot on DGS was also done. / Ministry of Higher Education Malaysia and Universiti Tun Hussein Onn Malaysia (UTHM)

Wireless sensors are used widely for condition monitoring in electric machines. The metal enclosure of an electric motor restricts the signal from sensors to radiate outside. The signal from the metal cavity needs to be guided to the only opening in the enclosure, through a narrow gap between the stator and the rotating rotor. Gap waveguide technology is proposed as a solution by texturing the stator surface with electromagnetic band gap (EBG) structures. Arrays of periodic holey structures are used to realize the metasurface waveguide. Two Bravais lattice structures – square and hexagonal, are explored for guiding waves along a desired path in a parallel plate waveguide. Simulations are carried out to study the influence of various dimensions of the unit cells. A waveguide with hexagonal hole-type unitcell is designed and manufactured for experimental verification. The possibility of extending the same technology to cylindrical surface is confirmed by simulations. / Trådlösa sensorer används allmänt för tillståndsövervakning i elektriska maskiner. Metallhöljet hos en elektrisk motor begränsar signalen från sensorerna från att stråla utåt. Signalen från metallhåligheten behöver styras till den enda öppningen i höljet, genom ett smalt mellanrum mellan statorn och den roterande rotorn. Gap-vågledarteknik föreslås som en lösning genom att strukturera statorytan med elektromagnetiska bandgap-strukturer (EBG). Arrayer av periodiskt håliga strukturer används för att realisera metayt-vågledare. Två Bravais gitterkonstruktioner –kvadratiska och sexkantiga, undersöks för styrning av vågor längs en önskad väg i en parallellplattvågledare. Simuleringar utförs för att studera påverkan av olika dimensioner hos enhetscellerna. En vågledare med hexagonal håltypsenhetscell är konstruerad och tillverkad för experimentell verifiering. Möjligheten att utvidga samma teknik till cylindrisk yta bekräftas genom simuleringar.

In microwave frequency band, the planar technology is mainly used to fabricate electronic circuits. Propagation of surface waves belongs to the significant problem of this technology. Surface waves can cause unwanted coupling among particular parts of the structure and can degrade its parameters. The problem can be solved using an electromagnetic band gap structure (EBG). These periodic structures are able to suppress surface waves in different frequency bands. This thesis is focused on the modeling of these structures in the program COMSOL Multiphysics.