Liquid crystal display (LCD) has become ubiquitous and indispensable in our daily life. Recently, it faces strong competition from organic light emitting diode (OLED). In order to maintain a strong leader position, LCD camp has an urgent need to enrich the color performance and reduce the power consumption. This dissertation focuses on solving these two emerging and important challenges. In the first part of the dissertation we investigate the quantum dot (QD) technology to improve the both the color gamut and the light efficiency of LCD. QD emits saturated color and grants LCD the capability to reproduce color vivid images. Moreover, the QD emission spectrum can be custom designed to match to transmission band of color filters. To fully take advantage of QD's unique features, we propose a systematic modelling of the LCD backlight and optimize the QD spectrum to simultaneously maximize the color gamut and light efficiency. Moreover, QD enhanced LCD demonstrates several advantages: excellent ambient contrast, negligible color shift and controllable white point. Besides three primary LCD, We also present a spatiotemporal four-primary QD enhanced LCD. The LCD's color is generated partially from time domain and partially from spatial domain. As a result, this LCD mode offers 1.5× increment in spatial resolution, 2× brightness enhancement, slightly larger color gamut and mitigated LC response requirement (~4ms). It can be employed in the commercial TV to meet the challenging Energy star 6 regulation. Besides conventional LCD, we also extend the QD applications to liquid displays and smart lighting devices. The second part of this dissertation focuses on improving the LCD light efficiency. Conventional LCD system has fairly low light efficiency (4%~7%) since polarizers and color filters absorb 50% and 67% of the incoming light respectively. We propose two approaches to reduce the light loss within polarizers and color filters. The first method is a polarization preserving backlight system. It can be combined with linearly polarized light source to boost the LCD efficiency. Moreover, this polarization preserving backlight offers high polarization efficiency (~77.8%), 2.4× on-axis luminance enhancement, and no need for extra optics films. The second approach is a LCD backlight system with simultaneous color/polarization recycling. We design a novel polarizing color filter with high transmittance ( > 90%), low absorption loss (~3.3%), high extinction ratio (>10,000:1) and large angular tolerance (up to ±50˚). This polarizing color filter can be used in LCD system to introduce the color/polarization recycling and accordingly boost LCD efficiency by ~3 times. These two approaches open new gateway for ultra-low power LCDs. In the final session of this dissertation, we demonstrate a low power and color vivid reflective liquid crystal on silicon (LCOS) display with low viscosity liquid crystal mixture. Compared with commercial LC material, the new LC mixture offers ~4X faster response at 20oC and ~8X faster response at -20°C. This fast response LC material enables the field-sequential-color (FSC) driving for power saving. It also leads to several attractive advantages: submillisecond response time at room temperature, vivid color even at -20oC, high brightness, excellent ambient contrast ratio, and suppressed color breakup. With this material improvement, LCOS display can be promising for the emerging wearable display market.

Fiber optic based sensing is a growing field with many applications in civil and aerospace engineering, oil and gas industries, and particularly in harsh environments where electronics are not able to function. Optical fibers can be easily integrated into structures, are immune to electromagnetic interference, can be interrogated from remote distances, and can be multiplexed for distributed measurements. Because of these properties, specialty fiber designs and devices are being explored for sensing temperature, strain, pressure, curvature, refractive index, and more. Here we show a detailed analysis of a multicore fiber (MCF) for sensing, including its design and optimization in simulation, as well as experimental operation when used as sensor. The multicore fiber sensor's performance as a function of temperature, strain, bending, and acoustic waves are all explored. The MCF sensors are shown to be able to withstand temperatures up to 1000°C, making them suitable to be harsh environment sensors. Additionally, a simple method for increasing the sensitivity of the MCF to longitudinal force is shown to multiple the sensitivity of the MCF sensor by a factor of seven. Also, a configuration for decoupling force and temperature will be presented. Finally, a developing all-fiber device, a photonic lantern, will be shown in conjunction with the MCF in order to increase sensitivity, add directional sensitivity, and lower the cost of the sensor interrogation for bending measurements. In addition to the multicore fiber, an analysis of anti-resonant hollow core fiber (ARHCF) is also presented. The fibers' design-dependent propagation losses are explored, as well as their higher order mode content. Also, a potential application of an ARHCF for an in-fiber Raman air sensor is introduced, and the design optimization in simulation is shown.

Intensity auto correlator is device to measure pulse widths of ultrashort pulses on the order of picoseconds and femtoseconds. I have built an in-house, compact, portable, industry standard intensity auto correlator for measuring ultrashort pulse-widths. My device is suitable for pulse-widths from 500 ps to 50 fs. The impetus for developing this instrument stemmed from our development of a multicore-fiber laser for high power laser applications, which also produces very short pulses that cannot be measured with an oscilloscope. As techniques for measuring short pulse-widths have been well studied, what made my journey exciting was the process of taking an idea and realizing a successful, cost-efficient device. In this study, I have analyzed a Q-switched laser and my measured pulse-width matched the theoretical value previously calculated. I have also analyzed our mode-locked multicore fiber laser and results were encouraging. The notion to build one intensity autocorrelator was based on our labs future work, which was with modelocked multicore fiber laser, which at the moment is giving pulses on order of nanoseconds. Dr. Axel Schulzgen gave the responsibility to build an intensity autocorrelator on my shoulders. As, Intensity autocorrelators have been around for long time, he encouraged me to make one in house, compact, portable intensity autocorrelator which measures pulse widths of 50 fs up to 500 ps quite easily.

We explore the concepts of coherence and entanglement as they apply to both the classical and quantum natures of light. In the classical domain, we take inspiration from the tools and concepts developed in foundational quantum mechanics and quantum information science to gain a better understanding of classical coherence theory of light with multiple degrees of freedom (DoFs). First, we use polarization and spatial parity DoFs to demonstrate the notion of classical entanglement, and show that Bell's measure can serve as a useful tool in distinguishing between classical optical coherence theory. Second, we establish a methodical yet versatile approach called 'optical coherency matrix tomography' for reconstructing the coherency matrix of an electromagnetic beam with multiple DoFs. This technique exploits the analogy between this problem in classical optics and that of tomographically reconstructing the density matrix associated with multipartite quantum states in quantum information science. Third, we report the first experimental measurements of the 4 x 4 coherency matrix associated with an electromagnetic beam in which polarization and a spatial DoF are relevant, ranging from the traditional two-point Young's double slit to spatial parity and orbital angular momentum modes. In the quantum domain, we use the modal structure of classical fields to develop qubits and structure Hilbert spaces for use in quantum information processing. Advancing to three-qubit logic gates is an important step towards the success of optical schemes for quantum computing. We experimentally implement a variety of two- and three- qubit, linear and deterministic, single-photon, controlled, quantum logic gates using polarization and spatial parity qubits. Lastly, we demonstrate the implementation of two-qubit single-photon logic using polarization and orbital angular momentum qubits.

Vertical-cavity surface-emitting lasers (VCSELs) have been greatly improved and successfully commercialized over the past few decades owing to their ability to provide both mode and current confinement that enables low energy consumption, high efficiency and high modulation speed. However, further improvement of oxide VCSELs is limited by the nature of the oxide aperture because of self-heating, internal strain and difficulties in precise size control. In this dissertation, VCSELs using lithographic approach are demonstrated to overcome the limitations of oxide VCSELs, in which an intra-cavity phase shifting mesa is applied to define the device size and provide optical mode and electrical current confinement instead of an oxide aperture. A newly developed model of intrinsic modulation response is proposed and analyzed to focus on the thermal limit of the modulation speed of VCSELs. The results show that both the temperature dependent differential gain and stimulated emission rate impact laser speed and the stimulated emission rate dominates the speed limit. Thermal limits of modulation response are compared for oxide and lithographic VCSELs for various sizes. The results predict that the intrinsic modulation response can be significantly increased by using lithographic VCSELs due to low thermal resistance and reduced mode volume while maintaining high efficiency. The intrinsic bandwidth could exceed 100 GHz for a 2-?m-diameter lithographic VCSEL. Combined with low electrical parasitics, it is expected to produce over 100 Gb/s data rate from a single directly modulated laser. VCSELs designed for high speed are discussed and their characteristics are demonstrated.

Nowadays, Vertical-Cavity Surface-Emitting Lasers (VCSELs) are the most popular optical sources in short-reach data communications. In the commercial oxide VCSEL technology, an oxide aperture is created inside resonant cavity in realizing good mode and current confinement, however, high electrical resistance comes along with forming the oxide aperture and the electrical parasitic bandwidth becomes the main limitation in modulation speed. In this report, electrical bandwidths of oxide-free lithographic VCSELs have been studied along with their general lasing properties. Due to the new ways of fabricating the aperture, record low resistances have been achieved in oxide-free lithographic VCSELs with various sizes, while high slope efficiencies and high output powers have been maintained. High speed simulation has been performed showing the very low differential resistances will benefit much to the electrical parasitic bandwidths, and are expected to produce higher modulation speed. A bottom emitting structure has been proposed and analyzed, showing reduction in both mirror resistance and capacitance will further improve the modulation speed. The total 3-dB modulation bandwidth is expected to be 50-80 GHz, much higher than the bandwidth reached in existing oxide VCSELs. Lithographic VCSELs also show superior lasing characteristics, including record low thermal resistance and record high output power. The maximum power exceeds 19 mW in a 6 µm device and over 50 % power conversion efficiency has been achieved. A maximum single mode operation power of 5 mW has been observed from a 1 µm diameter VCSEL. High temperature stress testing has been performed showing lithographic VCSELs can operate more reliably than oxide VCSELs under extreme operating conditions. Lithographic VCSEL with low electrical resistance, single-mode operation, high efficiency, and high power will be a strong candidate as the optical source in high speed data communications, as well as other applications such as high power VCSEL arrays and optical sensing.

The purpose of this study is to investigate the design of a Raman fiber laser based on a molecule hydrogen-filled hollow-core fiber with non-touching single ring of capillaries structure. O-hydrogen vibrational frequency shift of 4155 cm-1 and rotational frequency shift of 587 cm-1 were employed to generate Raman scattering from a 1064nm pump source. A thorough exploration was made to show how all Raman fiber laser components made up: gas chamber, hollow-core fibers, windows. The whole process of chamber design, modification and fabrication were demonstrated. Besides, two kinds of anti-resonant hollow-core fibers were studied and tested. The transmission and loss spectrum of these fibers were measured thus it's easier to make a choice. Through the whole thesis a Raman fiber laser can be set up and tested very soon.

For many specific applications, such as sensors, aerospace, chemical industry, deep-well oil-field industry, metal-coated fiber shows strong abilities to satisfy people's requirement. With in-line coating technology, we are able to coat Aluminum on the fibers. Using electromagnetic induction, we can easily heat an electrically conducting thing such as a metal with the eddy current. This process is defined as Induction heating. And we will melt the Aluminum by this induction heating during drawing the fibers on the tower. Introduce the fiber tower system. The drawing process of in-line technology is formed of the following steps: Position, Melting, Forming into fibers, Checking the diameter, Revising, Protective coatings. We will follow these to make the Aluminum coating fiber. With the help of the software which is 123D Design, I have four 3D model of the coating systems. Show the details of the all the coating systems such as the shape and the length of coated-fiber we can get. Talk about the photonic lantern which is the first project that I took part in when I joined the group. Show the mode profiles of our 6 to 1 lantern.

Due to its versatility, rare earth doped fiber amplifier (RDFA) has attracted a lot of researchers worldwide in recent years. Depends on different kinds of rare earth ion, RDFA can be categorized into neodymium doped fiber amplifier (NDFA), erbium doped fiber amplifier (EDFA), thulium doped fiber amplifier (TDFA), and so forth. Among many kinds of RDFA, the ytterbium doped fiber amplifier (YDFA) has received even more interest, especially in high power application, mainly because of its broad gain bandwidth and high conversion efficiency which are due to its relatively simple electronic structure. The purpose of this research is to study the YDFA by developing a model and building a YDFA setup in free space configuration. The active fiber used in the setup is a few modes, polarization-maintaining double-cladding ytterbium-doped large mode area (LMA) fiber and the length is 1m. The pump used is a tunable 975nm laser diode and a 1064nm laser diode was used as the seed which has 630 ps pulse duration time and 9.59 kHz repetition rate. This setup produces 2.514W average power, corresponding to a pulse peak power of 423kW, with 15W absorbed pump power. The spectrum of the output power has also been investigated.

In recent years, non-Hermitian degeneracies also known as exceptional points (EPs) have emerged as a new paradigm for engineering the response of optical systems. EPs can appear in a wide class of open non-Hermitian configurations. Among different types of non-conservative photonic systems, parity-time (PT) symmetric arrangements are of particular interest since they provide an excellent platform to explore the physics of exceptional points. In this work, the intriguing properties of exceptional points are utilized to address two of the long standing challenges in the field of integrated photonics- enforcing single mode lasing in intrinsically multimode cavities and enhancing the sensitivity of micro-resonators. In the first part of this work, I will describe how stable single mode lasing can be readily achieved in longitudinally and transversely multi-moded microring cavities through the systematic utilization of abrupt phase transitions at exceptional points. This technique will be first demonstrated in a parity-time laser that is comprised of a gain cavity coupled to an identical but lossy counterpart. A detailed study of the behavior of this system around the exceptional point will be presented. Furthermore, we report the first experimental realization of a dark state laser in which by strategically designing the spectral locations of exceptional points, widely tunable single-mode lasing can be attained even at high pump levels. Despite the presence of loss in such open laser systems, the slope efficiency remains virtually intact. Our results demonstrate the potential of exceptional points as a versatile design tool for mode management in on-chip laser configurations. In the second part of my dissertation, I will show how the exceptional points and their underlying degeneracies can be used to significantly boost the intrinsic sensitivity of microcavities. I will demonstrate the enhanced sensitivity in a binary PT-symmetric coupled cavity arrangement that is biased at an exceptional point. Then I will report the first observation of higher-order exceptional points in a ternary parity-time symmetric microring laser system with a judiciously tailored gain-loss distribution. The enhanced response associated with this ternary system follows a cubic root dependence on externally introduced perturbation, which can in turn be detected in the spectral domain. Using such arrangements, more than one order of magnitude enhancement in the sensitivity is observed experimentally. These results can pave the way towards improving the performance of current on-chip micro-cavity sensors.