Ching Ngai-hung. / Thesis (M.Phil.)--Chinese University of Hong Kong, 2001. / Includes bibliographical references (leaves 81-83). / Abstracts in English and Chinese. / Chapter CHAPTER 1 ´ؤ --- INTRODUCTION --- p.1 / Chapter 1.1 --- Background on Micro Power Supply --- p.1 / Chapter 1.2 --- Literature Survey --- p.3 / Chapter 1.2.1 --- Comparison Among Different Power Sources & Transduction Mechanisms --- p.3 / Chapter 1.2.2 --- Previous Works in Vibration Based Generator --- p.6 / Chapter CHAPTER 2 一 --- DESIGN OF THE MICRO-POWER GENERATOR --- p.8 / Chapter 2.1 --- Concept of Power Generation --- p.8 / Chapter 2.2 --- Design Objectives of the Micro Power Generation --- p.9 / Chapter 2.3 --- System Modelling and Configuration of the Generator --- p.10 / Chapter 2.4 --- RESONATING STRUCTURE --- p.13 / Chapter 2.4.1 --- Material Selection --- p.13 / Chapter 2.4.2 --- Fabrication Method --- p.14 / Chapter CHAPTER 3 一 --- INDUCTING STRUCTURE --- p.17 / Chapter 3.1 --- Selection of Winding Method --- p.17 / Chapter 3.2 --- Solenoid Windings --- p.19 / Chapter 3.2.1 --- Fabrication Process --- p.19 / Chapter 3.3 --- PCB Windings --- p.20 / Chapter 3.3.1 --- Fabrication Process of the Prototype of Six-layer PCB --- p.21 / Chapter CHAPTER 4 一 --- EXPERIMENTAL RESULTS --- p.27 / Chapter 4.1 --- Experimental Setup --- p.27 / Chapter 4.1.1 --- Generator Systems --- p.27 / Chapter 4.1.2 --- Measurement of Vibration and Output from the Generator --- p.28 / Chapter 4.1.3 --- Observations of Vibration Motions --- p.31 / Chapter 4.2 --- SPRING FOR THE MICRO GENERATOR --- p.32 / Chapter 4.2.1 --- Spring Micromachining Optimization --- p.32 / Chapter 4.2.2 --- Mode Shapes and Spiral-spring Structures --- p.35 / Chapter 4.3 --- MAGNET FOR THE MICRO GENEARTOR --- p.37 / Chapter 4.3.1 --- Generator Output and Magnetic Dipole Orientation --- p.37 / Chapter 4.4 --- HAND-WIRED COIL GENEARTOR --- p.45 / Chapter 4.4.1 --- Performance of Different Design of Housings --- p.45 / Chapter 4.5 --- PCB COIL GENERATOR --- p.48 / Chapter 4.5.1 --- Size of PCB Coils vs. Generator Output --- p.48 / Chapter 4.5.2 --- Effect of Number of PCB Layers --- p.54 / Chapter 4.5.3 --- Array of Generators --- p.61 / Chapter CHAPTER 5 一 --- MODELLING AND COMPUTER SIMULATION --- p.63 / Chapter 5.1 --- Modelling the Second-Order System --- p.63 / Chapter CHAPTER 6 一 --- APPLICATION DEMONSTRATIONS --- p.69 / Chapter 6.1 --- INFRARED SIGNAL TRANSMISSION --- p.69 / Chapter 6.2 --- RF WIRELESS TEMPERATURE SENSING SYSTEM --- p.70 / Chapter CHAPTER 7 ´ؤ --- CONCLUSION --- p.75 / Chapter CHAPTER 8 一 --- FUTURE WORK --- p.77 / BIBLIOGRAPHY --- p.81 / APPENDIX --- p.84

Advances in semiconductor technology and design automation methods have introduced a new era for electronic products. With design sizes in millions of logic gates and operating frequencies in GHz, defects-per-million rates continue to increase, and defects are manifesting themselves in subtle ways. / Diagnosing functional failures in complicated electronic boards is a challenging task, wherein debug technicians try to identify defective components by analyzing some syndromes obtained from the application of diagnostic tests. The diagnosis effectiveness and efficiency rely heavily on the quality of the in-house developed diagnostic tests and the debug technicians’ knowledge and experience, which, however, have no guarantees nowadays. To tackle this problem, this thesis proposes a novel agent-assisted diagnostic framework for board-level functional failures, namely AgentDiag, which facilitates to evaluate the quality of the diagnostic tests and bridge the knowledge gap between the diagnostic programmers who write diagnostic tests and the debug technicians who conduct in-field diagnosis with a lightweight model of the boards and tests. / Machine learning algorithms have been advocated for automated diagnosis of board-level functional failures due to the extreme complexity of the problem. Such reasoning-based solutions, however, remain ineffective at the early stage of the product cycle, simply because there are insufficient historical data for training the diagnostic system that has a large number of test syndromes. Guided by a proposed metric isolation capability, AgentDiag is able to leverage the knowledge from the lightweight model to selecting a reduced test syndrome set for diagnosis in an adaptive manner. / While AgentDiag is effective to improve the diagnostic accuracy, this technique, by excluding some test syndromes, may cause information loss for diagnosis. The thesis further presents a novel test syndrome merging methodology to address this problem. That is, by leveraging the domain knowledge of the diagnostic tests and the board structural information, we adaptively reduce the feature size of the diagnostic system by selectively merging test syndromes such that it can effectively utilize the available training cases. / Experimental results on real industrial boards and an OpenRISC design demonstrate the effectiveness of the proposed solutions. / 半導體技術和設計自動化的高速發展開啟了電子產品的新紀元。百萬級別的設計尺寸和上G赫茲的操作頻率使得每百萬次採樣數的缺陷率繼續上升，缺陷顯現方式也日益微妙。 / 複雜電子板的診斷是一項極具挑戰的工作。調試人員通常通過分析診斷測試所產生的症狀，甄別有缺陷的元件。診斷的有效性和效率就極大地依賴於診斷測試的質量和調試人員的知識經驗，但是現在這些都是沒有確定性的。為了解決這一問題，本文提出一個新穎的針對板級功能性故障的代理輔助診斷系統AgentDiag。它幫助評估診斷測試的質量，並架起編寫診斷測試的測試程式員和從事實際診斷工作的調試人員之間的橋樑。 / 因為板級診斷的極度複雜，機器學習算法已經被提出來解決這一問題。但是這些基於推導的方法在早期很難達到好的效果，原因是過大的測試數量和相對較少的訓練數據。在度量Isolation Capability的引導下，能夠適應性地利用來自輕量級模型的知識去選取一個症狀集進行診斷。 / AgentDiag可以有效地提高診斷準確率，但是由於是直接剔除一部分測試症狀，所以有可能造成信息的丟失。本文進一步提出了一個測試症狀合併的方法來解決這一問題。那就是利用診斷測試和電路板的結構描述，我們可以適應性地利用選擇性合併的測試症狀來減少測試症狀的數目，從而有效地利用已有的測試數據。 / 來自實際的工業電路板和OpenRisc設計的實驗數據驗證了提出的方法的有效性。 / Sun, Zelong. / Thesis M.Phil. Chinese University of Hong Kong 2014. / Includes bibliographical references (leaves 47-51). / Abstracts also in Chinese. / Title from PDF title page (viewed on 12, October, 2016). / Detailed summary in vernacular field only. / Detailed summary in vernacular field only. / Detailed summary in vernacular field only. / Detailed summary in vernacular field only. / Detailed summary in vernacular field only.

The growing interest in programmable analog circuits has led to the development of Field Programmable Analog Arrays (FPAAs). An FPAA consists of: 1) a programmable cell that can be reconfigured to perform several analog functions. 2) an architecture that interconnects a number of copies of the programmable cell. In this thesis, the full monolithic circuit implementation of the analog part of the programmable cell is presented. Chapter I gives an introduction to the idea of FPAA and introduces the FPAA architecture and the cell block diagram. Chapter II deals with the design and verification of a differential current-mode four-quadrant multiplier. The weighting-summing circuit with the normalizing stage is discussed in Chapter III. Chapter IV presents the design of a current-mode low-voltage programmable integratorgain circuit. Programmability was achieved by changing the bias current in the designed circuits; no analog switches were used in the signal path. This shows no effect on the performance of the circuits. The presented programming method, however, relies on the availability of a programmable current source with a storage capability. The design of this current source is discussed in chapter V. Conclusions are summarized in Chapter VI. The presented designs throughout the whole thesis were supported by detailed analytical derivations with the necessary SPICE simulations to verify the performance.

In this research a unique linear pulse amplifier was developed that significantly reduces the spread in pulse amplitudes of those pulses selected from a Ge(Li) detector by a single channel analyzer. This circuit utilizes an operational amplifier with its closed-loop gain automatically controlled by a P-channel junction field.-effect transistor. The amplification is adjusted for each pulse such that the output pulses are constant in amplitude. The performance of the system was analyzed with a multichannel analyzer and it was shown that an improvement in pulse amplitude variation of as much as 29.1 percent was achieved.Ball State UniversityMuncie, IN 47306

Thesis (Ph. D.)--School of Electrical and Computer Engineering, Georgia Institute of Technology, 2004. Directed by Madhaven Swaminathan. / Vita. Includes bibliographical references (leaves 154-163).

Not available / text

No description available.

No description available.

No description available.

Thesis (Ph.D.)--Tufts University, 1998. / Adviser: Anil Saigal. Submitted to the Dept. of Mechanical Engineering. Includes bibliographical references. Access restricted to members of the Tufts University community. Also available via the World Wide Web;