• Refine Query
  • Source
  • Publication year
  • to
  • Language
  • 69
  • 1
  • Tagged with
  • 70
  • 70
  • 54
  • 50
  • 15
  • 9
  • 9
  • 8
  • 8
  • 7
  • 7
  • 6
  • 6
  • 6
  • 6
  • About
  • The Global ETD Search service is a free service for researchers to find electronic theses and dissertations. This service is provided by the Networked Digital Library of Theses and Dissertations.
    Our metadata is collected from universities around the world. If you manage a university/consortium/country archive and want to be added, details can be found on the NDLTD website.
61

Espectroscopia não linear de interfaces aplicada ao estudo de transistores poliméricos / Nonlinear interface spectroscopy applied to the study of polymeric transistors

Motti, Silvia Genaro 20 March 2014 (has links)
O uso de materiais orgânicos em dispositivos eletrônicos, além de menor custo e facilidade de processamento, permite obter flexibilidade e transparência. Entretanto, para que a aplicação comercial desses materiais seja viável, os processos que ocorrem nos dispositivos ainda precisam ser mais bem compreendidos, visando maior eficiência e tempo de vida. É de grande importância o estudo das interfaces entre o semicondutor orgânico e os contatos metálicos, onde ocorre transferência de portadores de carga, e a interface com o dielétrico em transistores orgânicos (OFETs), onde se forma o canal de condução. As interfaces de dispositivos eletrônicos poliméricos foram estudadas, utilizando-se Espectroscopia SFG (do inglês Sum Frequency Generation). Esta técnica obtém um sinal com a soma das frequências de dois feixes incidentes sobrepostos, em um processo seletivo a meios onde não há simetria de inversão, como no caso de interfaces. Com aplicação de um feixe de excitação na região visível e outro sintonizável no infravermelho médio, a espectroscopia SFG fornece um espectro vibracional da interface e permite o estudo do ordenamento e da orientação dos grupos moleculares. Foram construídos e analisados OFETs de poli-3-hexiltiofeno (P3HT) preparados sobre substrato de vidro ou silício, utilizando como isolante óxido de silício e/ou poli-metil-metacrilato (PMMA). Foram obtidos espectros in situ do canal de OFETs em operação, observando pequenas alterações na forma de linha, porém a baixa relação sinal/ruído não permitiu obter conclusões detalhadas. Foi constatada a manifestação de bandas da camada isolante de PMMA como consequência da aplicação de campo elétrico. Este fenômeno foi considerado como uma nova ferramenta para estudar a distribuição de cargas e campo elétrico no canal de transistores. Não foram detectados sinais de degradação irreversível no polímero semicondutor a curto prazo, e a mudança de comportamento elétrico foi atribuída majoritariamente a dopagem por oxigênio absorvido no material. / The usage of organic materials in electronic devices allows not only low cost and ease of processing but also flexibility and transparency. However, to achieve viable commercial application, the processes involved on the devices operation must still be better comprehended, aiming for improved efficiency and life time. There is great importance in the study of the interfaces between organic semiconductors and metallic contacts, where charge transfer takes place, and between the dielectric and semiconductor layers of organic transistors (OFETs), where the conducting channel is formed. The interfaces in polymeric electronic devices were studied by SFG spectroscopy (Sum Frequency Generation). In this technique, a signal with frequency that equals the sum of those of two incident beams is generated in a process only allowed in media without inversion symmetry, such as interfaces. Using a visible excitation beam and a tunable infrared one, SFG spectroscopy yields a vibrational spectrum of the interface and provides information about the conformation and orientation of molecular groups. Poly-3-hexylthiophene (P3HT) OFETs were fabricated using glass or silicon substrates and silicon oxide and/or poly-methyl-methacrylate (PMMA) for the dielectric layer. SFG spectra were acquired in situ from the channel region of operating OFETs, observing small changes in lineshape, but low signal-to-noise ration did not allow a detailed interpretation. It was found that PMMA vibrational bands appeared when polarizing the device. This phenomenon was considered a new tool for studying the electric field and charge distribution along transistor channels. It was not noted any sign of short term irreversible degradation of the semiconducting polymer, and the change in the electrical behavior was attributed mainly to doping of the polymer by oxygen absorbed in the material.
62

Espectroscopia não linear de interfaces aplicada ao estudo de transistores poliméricos / Nonlinear interface spectroscopy applied to the study of polymeric transistors

Silvia Genaro Motti 20 March 2014 (has links)
O uso de materiais orgânicos em dispositivos eletrônicos, além de menor custo e facilidade de processamento, permite obter flexibilidade e transparência. Entretanto, para que a aplicação comercial desses materiais seja viável, os processos que ocorrem nos dispositivos ainda precisam ser mais bem compreendidos, visando maior eficiência e tempo de vida. É de grande importância o estudo das interfaces entre o semicondutor orgânico e os contatos metálicos, onde ocorre transferência de portadores de carga, e a interface com o dielétrico em transistores orgânicos (OFETs), onde se forma o canal de condução. As interfaces de dispositivos eletrônicos poliméricos foram estudadas, utilizando-se Espectroscopia SFG (do inglês Sum Frequency Generation). Esta técnica obtém um sinal com a soma das frequências de dois feixes incidentes sobrepostos, em um processo seletivo a meios onde não há simetria de inversão, como no caso de interfaces. Com aplicação de um feixe de excitação na região visível e outro sintonizável no infravermelho médio, a espectroscopia SFG fornece um espectro vibracional da interface e permite o estudo do ordenamento e da orientação dos grupos moleculares. Foram construídos e analisados OFETs de poli-3-hexiltiofeno (P3HT) preparados sobre substrato de vidro ou silício, utilizando como isolante óxido de silício e/ou poli-metil-metacrilato (PMMA). Foram obtidos espectros in situ do canal de OFETs em operação, observando pequenas alterações na forma de linha, porém a baixa relação sinal/ruído não permitiu obter conclusões detalhadas. Foi constatada a manifestação de bandas da camada isolante de PMMA como consequência da aplicação de campo elétrico. Este fenômeno foi considerado como uma nova ferramenta para estudar a distribuição de cargas e campo elétrico no canal de transistores. Não foram detectados sinais de degradação irreversível no polímero semicondutor a curto prazo, e a mudança de comportamento elétrico foi atribuída majoritariamente a dopagem por oxigênio absorvido no material. / The usage of organic materials in electronic devices allows not only low cost and ease of processing but also flexibility and transparency. However, to achieve viable commercial application, the processes involved on the devices operation must still be better comprehended, aiming for improved efficiency and life time. There is great importance in the study of the interfaces between organic semiconductors and metallic contacts, where charge transfer takes place, and between the dielectric and semiconductor layers of organic transistors (OFETs), where the conducting channel is formed. The interfaces in polymeric electronic devices were studied by SFG spectroscopy (Sum Frequency Generation). In this technique, a signal with frequency that equals the sum of those of two incident beams is generated in a process only allowed in media without inversion symmetry, such as interfaces. Using a visible excitation beam and a tunable infrared one, SFG spectroscopy yields a vibrational spectrum of the interface and provides information about the conformation and orientation of molecular groups. Poly-3-hexylthiophene (P3HT) OFETs were fabricated using glass or silicon substrates and silicon oxide and/or poly-methyl-methacrylate (PMMA) for the dielectric layer. SFG spectra were acquired in situ from the channel region of operating OFETs, observing small changes in lineshape, but low signal-to-noise ration did not allow a detailed interpretation. It was found that PMMA vibrational bands appeared when polarizing the device. This phenomenon was considered a new tool for studying the electric field and charge distribution along transistor channels. It was not noted any sign of short term irreversible degradation of the semiconducting polymer, and the change in the electrical behavior was attributed mainly to doping of the polymer by oxygen absorbed in the material.
63

Estrutura e ambiente local de dimetil sulfóxido (DMSO) em diferentes meios iônicos / Structure and local environment of dimethyl sulfoxide (DMSO) in different ionic media

Avila, Jocasta Neves Libório de 29 October 2018 (has links)
Apesar de ser utilizado há muito tempo como solvente para espécies orgânicas e inorgânicas, bem como carreador de fármacos, muitos aspectos relativos à auto-associação intermolecular do dimetil sulfóxido (DMSO) e às suas interações com espécies iônicas são ainda motivos de controvérsia na literatura. No presente estudo, a estrutura e ambiente local de dimetil sulfóxido (DMSO) em diferentes meios iônicos foram estudados por meio de três abordagens diferentes. Na primeira abordagem, o efeito de não-coincidência Raman (NCR) observado na banda atribuída ao modo ν(S=O) do DMSO, ca. 1050 cm-1, foi investigado para o líquido puro e em soluções de tetracloreto de carbono (CCl4) e água. Além disso, foi investigado o efeito de espécies iônicas (Kl, KSCN, KBr, TBAN3, TBAOCN, LiClO4, Mg(ClO4)2) na frequência ν(S=O), bem como no NCR das soluções. Os resultados de NCR juntamente com as técnicas de infravermelho, RMN e de medidas de propriedades físico-químicas mostraram que essas espécies iônicas não somente afetam a estrutura de associação do DMSO, como são capazes de interagir fortemente com o solvente. Na segunda abordagem, com a finalidade de modular as propriedades de um líquido iônico, fez-se a análise estrutural das misturas envolvendo DMSO e água como solventes e o líquido iônico EAN como soluto por meio das técnicas de espalhamento de raios-X e de nêutrons. Os resultados mostraram que a estrutura cátion-ânion do EAN é afetada pela presença de DMSO e, que em ambos os solventes são evidentes fortes ligações de hidrogênio entre o cátion EA+ e os oxigênios do solvente e do ânion nitrato. As moléculas de água não afetam drasticamente a estrutura do EAN, pois seu caráter doador/aceptor de LH e seu tamanho permite a formação de pontes entre cátion e o ânion, no entanto, EAN consegue distorcer a rede tridimensional de ligação de hidrogênio da água. Por outro lado, as moléculas de DMSO afastam os ânions da região polar do EA+ na competição pela formação de LH com o cátion e o EAN, por sua vez, provoca a ruptura das estruturas de associação do DMSO. Na terceira abordagem, misturas envolvendo três diferentes SEPs (uma classe de líquidos iônicos); Relina, MUCHCl e DMUCHCl; com DMSO foram investigadas por meio de suas propriedades físico-químicas e por espectroscopia Raman, tendo em vista modular as propriedades dos SEPs. Neste caso, os resultados não apontaram para interações fortes e específicas envolvendo as espécies iônicas e o DMSO, mas a um maior empacotamento do sistema, onde os desvios de suas propriedades físico-químicas com relação à idealidade são negativos e sua mobilidade iônica juntamente com a análise dos espectros vibracionais não evidenciaram interações específicas. No entanto, as viscosidades e densidades diminuíram nas misturas e a mobilidade iônica foi favorecida. / Although it has long been used as a solvent for organic and inorganic species, as well as drug carriers, many aspects concerning the intermolecular self-association of dimethyl sulfoxide (DMSO) and their interactions with ionic species are still controversial in the literature. In the present study, the structure and local environment of dimethyl sulfoxide (DMSO) in different ionic media were studied using three different approaches. In the first approach, the Raman non-coincidence effect (NCE) observed in the band assigned to the DMSO ν(S = O) mode, ca. 1050 cm-1, was investigated for the pure liquid and in its solutions of carbon tetrachloride (CCl4) and water. In addition, the effect of ionic species (K1, KSCN, KBr, TBAN3, TBAOCN, LiClO4, Mg (ClO4)2) on the frequency ν(S = O) as well as the NCE of the solutions were investigated. The results of NCR together with the infrared, NMR and physico-chemical properties measurements showed that these ionic species not only affect the association structure of DMSO, but are also capable of interacting strongly with the solvent. In the second approach, with the purpose of modulating the properties of an ionic liquid, the structural analysis of the mixtures involving DMSO and water as solvents and the ionic liquid EAN as a solute were carried out by X-ray and neutron scattering techniques. The results showed that the cation-anion structure of the EAN is affected by the presence of DMSO and that in both solvents strong hydrogen bonds between the EA+ cation and the oxygen from solvent and from nitrate anion are evident. The water molecules do not affect the structure of the EAN drastically, because its LH donor/acceptor character and its size allows the formation of bridges between cation and anion, however, EAN can distort the hydrogen bonding three-dimensional network in water. On the other hand, the DMSO molecules repels the anions from the polar head of EA+ in the competition in forming LH with the cation, however EAN break down DMSO association structures. In the third approach, mixtures involving three different SEPs (a class of ionic liquids); Relina, MUCHCl and DMUCHCl; with DMSO were investigated by means of their physicochemical properties and by Raman spectroscopy, in order to modulate the properties of SEPs. In this case, the results did not point to strong and specific interactions involving the ionic species and DMSO, but to a greater packaging of the system, where the deviations of its physicochemical properties with respect to the ideality are negative and its ionic mobility together with the analysis of the vibrational spectra showed no specific interactions. However, the viscosities and densities decreased in the mixtures and the ionic mobility was favored.
64

Alguns aspectos acerca da adsorção de alcanotióis e bases nitrogenadas em ouro via espectroscopia não linear e microscopia de tunelamento de elétrons / Some aspects concerning the adsorption of alkanethiols and uracil derivates on Au via nonlinear spectroscopy and scanning tunneling microscopy

Aguiar, Hilton Barbosa de 15 February 2007 (has links)
Estudos de interface têm presenciado um recente crescimento devido as novas propriedades físico-químicas, que puderam ser explorados com o advento de técnicas com resolução ao nível molecular/atômico. Dessas técnicas, dois ramos que merecem destaque são as Microscopias de Varredura por Ponta de Prova e Espectroscopias Óticas. Neste trabalho fazemos uso de algumas destas técnicas (o Microscópio de Tunelamento de Elétrons e Espectroscopia Vibracional por Geração de Soma de Freqüências) para estudar a adsorção de moléculas alifáticas e aromáticas em Au. Dois casos são abordados: como a rugosidade do substrato influencia no mecanismo de automontagem de monocamadas de alcanotióis e a automontagem de derivados de uracil em interfaces eletroquímicas. No primeiro caso, mostra-se que a quantidade de defeitos moleculares na monocamada adsorvida e extremamente sensível a rugosidade do substrato utilizado. Unem-se os resultados das técnicas acima aos resultados de sondas eletroquímica para se chegar a um modelo. Também e estudado a dependência das etapas de fisisorção e quimisorção em função da concentração da solução de alcanotiól. Para o segundo caso, um derivado halogenado do uracil (5-fluorouracil), mostra-se como a substituição química na base nitrogenada leva a diferentes mecanismos de formação de monocamadas na interface eletroquímica. Imagens de Microscopia de Tunelamento de Elétrons com resolução atômica e molecular mostram que em densidade de cargas negativas as moléculas estão fisisorvidas, porém não formam estruturas periódicas em contraste com uracil e timina, entretanto em densidades de cargas positivas formam estruturas periódicas quimisorvidas, assim como uracil e timina. E discutido como são diferentes os mecanismos de interação intermolecular: no caso dos alcanotiois preponderando às interações de van der Waals e no caso dos derivados de uracil pelas ligações via pontes de hidrogênio são dominantes. / Interface science has experienced a new rebirth since the development of new probes with atomic/molecular resolution, giving new insights about the physical-chemical properties, which differ substantially from the bulk. Among these techniques, two branches deserve special attention: the Scanning Probe Microscopies and Optical Spectroscopy. In this work, two derivatives of theses techniques (the Scanning Tunnelling Microscopy and Vibrational Spectroscopy by Sum-Frequency Generation) are combined giving new insights about the molecular adsorption onto Au. Two examples are focused: how roughness plays a key role in the structure of self-assembled alkanethiol monolayer and the uracil derivatives self-assembling at electrochemical interfaces. For the former, it has been shown that the amount of defects on the adsorbed monolayer is highly sensitive to substrate roughness. Combining the results of each technique with a well-known electrochemical probe, a physical model is proposed. The physisorbed and chemisorbed states are studied as a function of alkanethiol solution concentration as well. For the later case, the chemical substitution of uracil leads to drastically different results for the physisorbed phase (negative charge densities), compared to uracil and thymine. In the chemisorbed phase (positive charge densities) imaging with molecular resolution is achieved showing a quasi-hexagonal structure, similar to the structure of thymine and uracil. It is discussed what are the main driving forces for the self-assembling mechanism: van der Waal interactions for the alkanethiols and hydrogen bonding for uracil derivatives.
65

Estrutura e ambiente local de dimetil sulfóxido (DMSO) em diferentes meios iônicos / Structure and local environment of dimethyl sulfoxide (DMSO) in different ionic media

Jocasta Neves Libório de Avila 29 October 2018 (has links)
Apesar de ser utilizado há muito tempo como solvente para espécies orgânicas e inorgânicas, bem como carreador de fármacos, muitos aspectos relativos à auto-associação intermolecular do dimetil sulfóxido (DMSO) e às suas interações com espécies iônicas são ainda motivos de controvérsia na literatura. No presente estudo, a estrutura e ambiente local de dimetil sulfóxido (DMSO) em diferentes meios iônicos foram estudados por meio de três abordagens diferentes. Na primeira abordagem, o efeito de não-coincidência Raman (NCR) observado na banda atribuída ao modo ν(S=O) do DMSO, ca. 1050 cm-1, foi investigado para o líquido puro e em soluções de tetracloreto de carbono (CCl4) e água. Além disso, foi investigado o efeito de espécies iônicas (Kl, KSCN, KBr, TBAN3, TBAOCN, LiClO4, Mg(ClO4)2) na frequência ν(S=O), bem como no NCR das soluções. Os resultados de NCR juntamente com as técnicas de infravermelho, RMN e de medidas de propriedades físico-químicas mostraram que essas espécies iônicas não somente afetam a estrutura de associação do DMSO, como são capazes de interagir fortemente com o solvente. Na segunda abordagem, com a finalidade de modular as propriedades de um líquido iônico, fez-se a análise estrutural das misturas envolvendo DMSO e água como solventes e o líquido iônico EAN como soluto por meio das técnicas de espalhamento de raios-X e de nêutrons. Os resultados mostraram que a estrutura cátion-ânion do EAN é afetada pela presença de DMSO e, que em ambos os solventes são evidentes fortes ligações de hidrogênio entre o cátion EA+ e os oxigênios do solvente e do ânion nitrato. As moléculas de água não afetam drasticamente a estrutura do EAN, pois seu caráter doador/aceptor de LH e seu tamanho permite a formação de pontes entre cátion e o ânion, no entanto, EAN consegue distorcer a rede tridimensional de ligação de hidrogênio da água. Por outro lado, as moléculas de DMSO afastam os ânions da região polar do EA+ na competição pela formação de LH com o cátion e o EAN, por sua vez, provoca a ruptura das estruturas de associação do DMSO. Na terceira abordagem, misturas envolvendo três diferentes SEPs (uma classe de líquidos iônicos); Relina, MUCHCl e DMUCHCl; com DMSO foram investigadas por meio de suas propriedades físico-químicas e por espectroscopia Raman, tendo em vista modular as propriedades dos SEPs. Neste caso, os resultados não apontaram para interações fortes e específicas envolvendo as espécies iônicas e o DMSO, mas a um maior empacotamento do sistema, onde os desvios de suas propriedades físico-químicas com relação à idealidade são negativos e sua mobilidade iônica juntamente com a análise dos espectros vibracionais não evidenciaram interações específicas. No entanto, as viscosidades e densidades diminuíram nas misturas e a mobilidade iônica foi favorecida. / Although it has long been used as a solvent for organic and inorganic species, as well as drug carriers, many aspects concerning the intermolecular self-association of dimethyl sulfoxide (DMSO) and their interactions with ionic species are still controversial in the literature. In the present study, the structure and local environment of dimethyl sulfoxide (DMSO) in different ionic media were studied using three different approaches. In the first approach, the Raman non-coincidence effect (NCE) observed in the band assigned to the DMSO ν(S = O) mode, ca. 1050 cm-1, was investigated for the pure liquid and in its solutions of carbon tetrachloride (CCl4) and water. In addition, the effect of ionic species (K1, KSCN, KBr, TBAN3, TBAOCN, LiClO4, Mg (ClO4)2) on the frequency ν(S = O) as well as the NCE of the solutions were investigated. The results of NCR together with the infrared, NMR and physico-chemical properties measurements showed that these ionic species not only affect the association structure of DMSO, but are also capable of interacting strongly with the solvent. In the second approach, with the purpose of modulating the properties of an ionic liquid, the structural analysis of the mixtures involving DMSO and water as solvents and the ionic liquid EAN as a solute were carried out by X-ray and neutron scattering techniques. The results showed that the cation-anion structure of the EAN is affected by the presence of DMSO and that in both solvents strong hydrogen bonds between the EA+ cation and the oxygen from solvent and from nitrate anion are evident. The water molecules do not affect the structure of the EAN drastically, because its LH donor/acceptor character and its size allows the formation of bridges between cation and anion, however, EAN can distort the hydrogen bonding three-dimensional network in water. On the other hand, the DMSO molecules repels the anions from the polar head of EA+ in the competition in forming LH with the cation, however EAN break down DMSO association structures. In the third approach, mixtures involving three different SEPs (a class of ionic liquids); Relina, MUCHCl and DMUCHCl; with DMSO were investigated by means of their physicochemical properties and by Raman spectroscopy, in order to modulate the properties of SEPs. In this case, the results did not point to strong and specific interactions involving the ionic species and DMSO, but to a greater packaging of the system, where the deviations of its physicochemical properties with respect to the ideality are negative and its ionic mobility together with the analysis of the vibrational spectra showed no specific interactions. However, the viscosities and densities decreased in the mixtures and the ionic mobility was favored.
66

Estudo das modificações estruturais induzidas pela radiação de alta energia sobre o copolímero P(VDF-TrFE) / Study of structural modifications induced by high energy radiation on the copolymer P (VDF-TrFE)

Hector Alexandre Chaves Gil 18 August 1998 (has links)
Filmes de poli(fluoreto de vinilideno-co-trifluoretileno), P(VDF-IrFE), com uma razão molar 70/30 de VDF e IrFE, respectivamente, foram expostos à radiação-X sob vácuo em uma ampla faixa de doses de irradiação. Este é um copolímero estatístico e semi-cristalino que possui a especial característica de cristalizar espontaneamente numa estrutura ferroelétrica. Ele também possui uma transição de fase ferro-paraelétrica detectável, definida como a temperatura de Curie (Tc). Devido a estas características tem despertado considerável interesse, em especial na área da eletrônica como elemento transdutor. As modificações induzidas foram investigadas por espectroscopia fotoacústica no infravermelho (FT-IR/PAS), assim como FI-IR por transmitância, calorimetria exploratória diferencial (DSC), termogravimetria (IG), difração de raios-X, UV/Visível e espectroscopia Raman. As técnicas espectroscópicas vibracionais (fotoacústica no IR, Raman e absorção no IR) foram utilizadas na identificação de bandas relacionadas às regiões cristalinas e amorfas, formação e rompimento de ligações e presença de novos grupos funcionais. Nos espectros IR e Raman são observadas duas bandas que estão relacionadas às regiões cristalinas e sofrem mudanças nas suas intensidades relativas de acordo com a dose de radiação. Essas mudanças podem ser interpretadas como aumento ou diminuição do grau de cristalinidade, e também em termos de modificações de arranjos cristalinos. A difração de raio-X mostrou o aparecimento de um pico, próximo àquele da fase ferroelétrica, sob aumento da dose de radiação, devido a um processo de modificação do arranjo cristalino acima da dose de 480 kGy. Foi observado um aumento de intensidade no referido pico de difração, correspondendo a um aumento do grau de cristalinidade da amostra. As curvas de DSC mostraram picos endotérmicos correspondentes a fusão e transições de fases que, através de suas variações, possibilitam avaliar os efeitos da irradiação com raios-X. Os espectros UV/Visível mostraram absorções dos cromóforos cujas intensidades de banda aumentam com a dose de radiação e diminuem durante o envelhecimento da amostra. Os dados indicam que a radiação-X induz uma modificação no arranjo cristalino do P(VDF-TrFE). Tal modificação, é provavelmente uma mudança de estrutura ferroelétrica para outra, paraelétrica. / Poly(vinylidene fluoride-co-trifluoroethylene) films, P(VDF-TrFE), with a molar ratio 70/30 of VDF and TrFE units, respectively, were exposed to X-ray radiation under vacuum in a wide range of irradiation doses. This is a statistic semi-crystalline copolymer and displays the unique feature of a spontaneous crystallization into a ferroelectric structure. It also possesses a detectable ferro-paraelectric transition, the Curie temperature (Tc). Due to these characteristics considerable interest in such copolymer has been generated, specially in electronics as a transducer element. The induced modifications were investigated by Fourier transform infrared photoacoustic spectroscopy (FT-IR/PAS) as well as transmittance FT-IR, differential scanning calorimetry (DSC), thermogravimetry (TG), X-ray diffraction, UV/Visible and Raman spectroscopies. The spectroscopic vibrational techniques (FT-IR/PAS, FT-IR and Raman) were used to identify bands related to crystalline and amorphous regions, bond formation, bond scission and presence of new functional groups. In both IR and Raman spectra were observed a couple of bands related to the crystalline regions that undergo changes of relative intensities with the radiation dose. These changes may be interpreted as an increase or decrease of the crystallinity degree, and also modifications of crystal structure. X-ray diffraction showed a new peak, close to that of the ferroelectric phase, under increasing radiation doses, due to a modification of crystal structure process above 480 kGy dose. An increase in the intensity of the former diffraction peak was observed, corresponding to an increase in the crystallinity degree. The DSC curves showed the endothermic peaks corresponding to the melting and the phase transitions, whose variations allow an evaluation of the effects of X-ray radiation. UV/Visible spectra showed chromophores absorptions whose band intensities increase by radiation dose and decrease during sample\'s aging. The data indicate that P(VDF-TrFE) under X-ray radiation exposition undergoes a crystal structure modification, probably a change of a ferroelectric structure to another one, paraelectric.
67

Estudo das modificações estruturais induzidas pela radiação de alta energia sobre o copolímero P(VDF-TrFE) / Study of structural modifications induced by high energy radiation on the copolymer P (VDF-TrFE)

Gil, Hector Alexandre Chaves 18 August 1998 (has links)
Filmes de poli(fluoreto de vinilideno-co-trifluoretileno), P(VDF-IrFE), com uma razão molar 70/30 de VDF e IrFE, respectivamente, foram expostos à radiação-X sob vácuo em uma ampla faixa de doses de irradiação. Este é um copolímero estatístico e semi-cristalino que possui a especial característica de cristalizar espontaneamente numa estrutura ferroelétrica. Ele também possui uma transição de fase ferro-paraelétrica detectável, definida como a temperatura de Curie (Tc). Devido a estas características tem despertado considerável interesse, em especial na área da eletrônica como elemento transdutor. As modificações induzidas foram investigadas por espectroscopia fotoacústica no infravermelho (FT-IR/PAS), assim como FI-IR por transmitância, calorimetria exploratória diferencial (DSC), termogravimetria (IG), difração de raios-X, UV/Visível e espectroscopia Raman. As técnicas espectroscópicas vibracionais (fotoacústica no IR, Raman e absorção no IR) foram utilizadas na identificação de bandas relacionadas às regiões cristalinas e amorfas, formação e rompimento de ligações e presença de novos grupos funcionais. Nos espectros IR e Raman são observadas duas bandas que estão relacionadas às regiões cristalinas e sofrem mudanças nas suas intensidades relativas de acordo com a dose de radiação. Essas mudanças podem ser interpretadas como aumento ou diminuição do grau de cristalinidade, e também em termos de modificações de arranjos cristalinos. A difração de raio-X mostrou o aparecimento de um pico, próximo àquele da fase ferroelétrica, sob aumento da dose de radiação, devido a um processo de modificação do arranjo cristalino acima da dose de 480 kGy. Foi observado um aumento de intensidade no referido pico de difração, correspondendo a um aumento do grau de cristalinidade da amostra. As curvas de DSC mostraram picos endotérmicos correspondentes a fusão e transições de fases que, através de suas variações, possibilitam avaliar os efeitos da irradiação com raios-X. Os espectros UV/Visível mostraram absorções dos cromóforos cujas intensidades de banda aumentam com a dose de radiação e diminuem durante o envelhecimento da amostra. Os dados indicam que a radiação-X induz uma modificação no arranjo cristalino do P(VDF-TrFE). Tal modificação, é provavelmente uma mudança de estrutura ferroelétrica para outra, paraelétrica. / Poly(vinylidene fluoride-co-trifluoroethylene) films, P(VDF-TrFE), with a molar ratio 70/30 of VDF and TrFE units, respectively, were exposed to X-ray radiation under vacuum in a wide range of irradiation doses. This is a statistic semi-crystalline copolymer and displays the unique feature of a spontaneous crystallization into a ferroelectric structure. It also possesses a detectable ferro-paraelectric transition, the Curie temperature (Tc). Due to these characteristics considerable interest in such copolymer has been generated, specially in electronics as a transducer element. The induced modifications were investigated by Fourier transform infrared photoacoustic spectroscopy (FT-IR/PAS) as well as transmittance FT-IR, differential scanning calorimetry (DSC), thermogravimetry (TG), X-ray diffraction, UV/Visible and Raman spectroscopies. The spectroscopic vibrational techniques (FT-IR/PAS, FT-IR and Raman) were used to identify bands related to crystalline and amorphous regions, bond formation, bond scission and presence of new functional groups. In both IR and Raman spectra were observed a couple of bands related to the crystalline regions that undergo changes of relative intensities with the radiation dose. These changes may be interpreted as an increase or decrease of the crystallinity degree, and also modifications of crystal structure. X-ray diffraction showed a new peak, close to that of the ferroelectric phase, under increasing radiation doses, due to a modification of crystal structure process above 480 kGy dose. An increase in the intensity of the former diffraction peak was observed, corresponding to an increase in the crystallinity degree. The DSC curves showed the endothermic peaks corresponding to the melting and the phase transitions, whose variations allow an evaluation of the effects of X-ray radiation. UV/Visible spectra showed chromophores absorptions whose band intensities increase by radiation dose and decrease during sample\'s aging. The data indicate that P(VDF-TrFE) under X-ray radiation exposition undergoes a crystal structure modification, probably a change of a ferroelectric structure to another one, paraelectric.
68

Vidro de Chumbo-Fosfato Pb3(PO4)2 com altas dopagens de Neodímio / Lead-phosphate Glass Pb3 (PO4) 2 with high dosages of Neodymium

Novais, Andréa de Lima Ferreira 31 July 2015 (has links)
In this work, the structural and optical properties of vitreous lead phosphate system were investigated Pb3(PO4)2 with high concentrations of Nd3+. These glasses were produced by melting/cooling method. The synthesis conditions such as the melting temperature of the components have been optimized in order to obtain good optical quality and chemical resistance for subsequent preparation of optical fibers, optical integrated circuits and other devices. Measures for the X-ray difiraction revealed amorphous structures across the track. The optical window determined by absorption spectroscopy is between 300 and 2750 nm. The analysis based on Judd-Ofelt theory were made based on the absorption spectra of the individual bands. The determination of the phenomenological parameters and allows the spectroscopic determination of relevant parameters such as radiative lifetime, quantum eficiency and luminescence branching ratio, showed little change in the crystalline structure of the glass network. However, it was observed changes was observed in the distribution of electron density in the rare earth ions to highest concentrations of these dopants. The Raman spectroscopy showed spectral shifts between regions 900-1100 cm -1 and 1150-1400 cm-1 suggesting changes in phosphate network connections (PO4)3- e (PO2)as, respectively. Spectroscopy measurements Fourier transform in the region 500- 4000 cm -1 showed an increase in content OH- with increasing concentration of Nd3+. This result was attributed to increased hygroscopic sample because it is in opposition to the results of analyzes of the Urbach energy that indicated reduction in clutter density of localized states. The measures relating to the lifetime in the arrays without treatment and with heat treatment showed no change in the structure. By comparing the experimental and radiative lifetimes was observed a change abrupt between these two parameters may be related to a possible level changes in the matrix. The results obtained in this study contribute to research on materials that may be used as active means for solid-state lasers in the near infrared region, pumped by high-power diode lasers available on the market at low cost. / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / Neste trabalho foram investigadas as propriedades estruturais e ópticas do sistema vítreo fosfato de chumbo Pb3(PO4)2 com altas concentrações de Nd3+. Esses vidros foram produzidos pelo método de fusão/resfriamento. As condições de síntese como a temperatura de fusão dos componentes, foram otimizadas com o objetivo de obter boa qualidade óptica e resistência química para posterior preparação de fibras ópticas, circuitos ópticos integrados entre outros dispositivos. Medidas relativas á difração de raios X revelaram estruturas amorfas em toda a faixa. A janela óptica determinada por espectroscopia de absorção está compreendida entre 300 e 2750 nm. A análise baseada na teoria de Judd-Ofelt foram feitas baseadas nos espectros de absorção das bandas individualizadas. A determinação dos parâmetros fenomenológicos além de permitir a determinação de parâmetros espectroscópicos relevantes, tais como, tempo de vida radiativo, eficiência quântica de luminescência e razão de ramificação, evidenciou pouca alteração na estrutura cristalina da rede vítrea. Só foi observado alteração na distribuição da densidade eletrônica nos íons terras raras para altas concentrações destes dopantes. A espectroscopia Raman mostrou deslocamentos espectral nas regiões entre 900-1100 cm-1 e 1150-1400 cm-1 sugerindo alterações nas ligações da rede fosfato (PO4)3- e (PO2)as, respectivamente. Medidas de espectroscopia por transformada de Fourier, na região de 500 a 4000 cm-1, mostraram um aumento no teor de OH- com o aumento da concentração de Nd3+. Este resultado foi atribuído ao aumento da higroscopia da amostra e está em oposição aos resultados das análises relativas a energia de Urbach que indicaram redução na desordem da densidade de estados localizados. As medidas relativas ao tempo de vida nas matrizes sem tratamento e com tratamento térmico mostraram que não houve alteração na estrutura. Ao comparar os tempos de vida experimentais e radiativos foi observado uma mudança brusca entre esses dois parâmetros que pode estar relacionada a uma possível alteração na matriz. Os resultados obtidos neste trabalho contribuem com as pesquisas sobre materiais que podem ser utilizados como meios ativos para lasers de estado sólido na região do infravermelho próximo, bombeados por lasers de diodo de alta potência disponíveis no mercado a baixo custo.
69

Alguns aspectos acerca da adsorção de alcanotióis e bases nitrogenadas em ouro via espectroscopia não linear e microscopia de tunelamento de elétrons / Some aspects concerning the adsorption of alkanethiols and uracil derivates on Au via nonlinear spectroscopy and scanning tunneling microscopy

Hilton Barbosa de Aguiar 15 February 2007 (has links)
Estudos de interface têm presenciado um recente crescimento devido as novas propriedades físico-químicas, que puderam ser explorados com o advento de técnicas com resolução ao nível molecular/atômico. Dessas técnicas, dois ramos que merecem destaque são as Microscopias de Varredura por Ponta de Prova e Espectroscopias Óticas. Neste trabalho fazemos uso de algumas destas técnicas (o Microscópio de Tunelamento de Elétrons e Espectroscopia Vibracional por Geração de Soma de Freqüências) para estudar a adsorção de moléculas alifáticas e aromáticas em Au. Dois casos são abordados: como a rugosidade do substrato influencia no mecanismo de automontagem de monocamadas de alcanotióis e a automontagem de derivados de uracil em interfaces eletroquímicas. No primeiro caso, mostra-se que a quantidade de defeitos moleculares na monocamada adsorvida e extremamente sensível a rugosidade do substrato utilizado. Unem-se os resultados das técnicas acima aos resultados de sondas eletroquímica para se chegar a um modelo. Também e estudado a dependência das etapas de fisisorção e quimisorção em função da concentração da solução de alcanotiól. Para o segundo caso, um derivado halogenado do uracil (5-fluorouracil), mostra-se como a substituição química na base nitrogenada leva a diferentes mecanismos de formação de monocamadas na interface eletroquímica. Imagens de Microscopia de Tunelamento de Elétrons com resolução atômica e molecular mostram que em densidade de cargas negativas as moléculas estão fisisorvidas, porém não formam estruturas periódicas em contraste com uracil e timina, entretanto em densidades de cargas positivas formam estruturas periódicas quimisorvidas, assim como uracil e timina. E discutido como são diferentes os mecanismos de interação intermolecular: no caso dos alcanotiois preponderando às interações de van der Waals e no caso dos derivados de uracil pelas ligações via pontes de hidrogênio são dominantes. / Interface science has experienced a new rebirth since the development of new probes with atomic/molecular resolution, giving new insights about the physical-chemical properties, which differ substantially from the bulk. Among these techniques, two branches deserve special attention: the Scanning Probe Microscopies and Optical Spectroscopy. In this work, two derivatives of theses techniques (the Scanning Tunnelling Microscopy and Vibrational Spectroscopy by Sum-Frequency Generation) are combined giving new insights about the molecular adsorption onto Au. Two examples are focused: how roughness plays a key role in the structure of self-assembled alkanethiol monolayer and the uracil derivatives self-assembling at electrochemical interfaces. For the former, it has been shown that the amount of defects on the adsorbed monolayer is highly sensitive to substrate roughness. Combining the results of each technique with a well-known electrochemical probe, a physical model is proposed. The physisorbed and chemisorbed states are studied as a function of alkanethiol solution concentration as well. For the later case, the chemical substitution of uracil leads to drastically different results for the physisorbed phase (negative charge densities), compared to uracil and thymine. In the chemisorbed phase (positive charge densities) imaging with molecular resolution is achieved showing a quasi-hexagonal structure, similar to the structure of thymine and uracil. It is discussed what are the main driving forces for the self-assembling mechanism: van der Waal interactions for the alkanethiols and hydrogen bonding for uracil derivatives.
70

Discriminação de espécies de peixes da costa amazônica e predição da composição centesimal usando um espectrofotômetro NIR portátil

FERREIRA, Fabielle Negrão 28 March 2014 (has links)
Submitted by Hellen Luz (hellencrisluz@gmail.com) on 2017-08-02T18:05:21Z No. of bitstreams: 2 license_rdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf8427e (MD5) Dissertacao_DiscriminacaoEspeciesPeixes.pdf: 1850111 bytes, checksum: f9f85f1c66300e60fbd187c469db81b6 (MD5) / Approved for entry into archive by Irvana Coutinho (irvana@ufpa.br) on 2017-08-04T16:47:02Z (GMT) No. of bitstreams: 2 license_rdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf8427e (MD5) Dissertacao_DiscriminacaoEspeciesPeixes.pdf: 1850111 bytes, checksum: f9f85f1c66300e60fbd187c469db81b6 (MD5) / Made available in DSpace on 2017-08-04T16:47:02Z (GMT). No. of bitstreams: 2 license_rdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf8427e (MD5) Dissertacao_DiscriminacaoEspeciesPeixes.pdf: 1850111 bytes, checksum: f9f85f1c66300e60fbd187c469db81b6 (MD5) Previous issue date: 2014-03-28 / CAPES - Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / A espectroscopia vibracional no infravermelho próximo (NIR) tem muitas aplicações na indústria, particularmente no controle da qualidade, discriminação e determinação da composição química em diversos alimentos, devido à rapidez e facilidade de aplicações em análises de rotina em relação aos métodos físicos e químicos tradicionais. Este trabalho tem como objetivo utilizar esta técnica para discriminar espécies de peixes oriundos da costa amazônica (Genyatremus luteus, Lutjanus purpureus, Macrodon ancylodon, Cynoscion acoupa, Micropogonias furnieri) e predizer componentes majoritários (teor de água, lipídios e proteínas). Foi utilizado um espectrômetro portátil de baixa resolução (1600-2400 nm) para obtenção de medidas espectrais em amostras (filés) intactas, trituradas e liofilizadas. Os espectros foram pré-processados através de derivadas utilizando-se o algoritmo de Savitzky-Golay para suavização de ruídos espectrais, tanto para o emprego dos modelos de predição como para os de discriminação. Os modelos de PCA e SIMCA foram aplicados para a discriminação de espécies, enquanto que PCR e PLS foram utilizados na predição dos componentes. Utilizando PCA observou-se a formação de grupos referentes às espécies de G. luteus e L. purpureus em amostras intactas e liofilizadas, e quando se aplicou o SIMCA, observou-se a formação de grupos referente às cinco espécies, confirmados através da distancia entre os grupos na faixa de 4,16 a 13,31 e 2,90 a 57,05 para amostras intactas e liofilizadas, respectivamente. O modelo de regressão PLS apresentou uma pequena variação positiva para os valores r2 e R2, sendo que as amostras liofilizadas apresentaram melhores resultados para os três parâmetros estudados: umidade (r2: 0,58, RMSEPcv: 1,11 e RDP: 1,40), lipídios (r2: 0,96, RMSEPcv: 1,09 e RDP: 4,82), e proteína bruta (r2: 0,86, RMSEPcv: 1,96 e RDP: 2,60). Foi obtida uma boa correlação entre os dados obtidos por métodos AOAC e aqueles preditos pela regressão PLS. / Vibrational spectroscopy in the near infrared (NIR) has many applications in industry, particularly in quality control, discrimination and determination of the chemical composition of different foods because of the speed and ease of application in routine analysis when compared to traditional physical and chemical methods. This work aims to use this technique to discriminate five fish species from the Amazonian coast (Genyatremus luteus , Lutjanus purpureus , Macrodon ancylodon , Cynoscion acoupa, Micropogonias furnieri) and predict major components (water content, lipids and proteins). A portable low-resolution spectrometer (1600-2400 nm) was used for obtaining spectral measures of fish samples (intact, crushed and lyophilized muscle tissue). The spectra were preprocessed by means of derivatives using the Savitzky-Golay algorithm for smoothing of spectral noises, when constructing both prediction and discrimination models. The PCA and SIMCA models were applied for species discrimination, while PCR and PLS were used in the prediction of the major components. Using PCA, it was observed the formation of well-defined groups of the species G. luteus and L. purpureus in intact and lyophilized samples. With SIMCA, it was observed the formation of groups of the five species, which were confirmed by the distance between groups in the range from 4.16 to 13.31 and 2.90 to 57.05 for intact and lyophilized samples, respectively. The PLS regression model showed a small positive variation values for r2 and R2 , and the lyophilized samples showed better results for the three studied parameters: water content ( r2: 0.58 , RMSEPcv: 1.11 and RDP: 1.40 ), lipids (r2 : 0.96 , RMSEPcv : RDP 1.09 and 4.82 ), and crude protein (r2: 0.86 , RMSEPcv : RDP and 1.96 : 2.60). A good correlation between proximate composition data and those predicted by PLS regression was obtained.

Page generated in 0.104 seconds