Research is performed to assess the viability of applying the least squares model to one-dimensional heat transfer and Euler-Bernoulli Beam Theory problems. Least squares models were developed for both the full and mixed forms of the governing one-dimensional heat transfer equation along weak form Galerkin models. Both least squares and weak form Galerkin models were developed for the first order and second order versions of the Euler-Bernoulli beams. Several numerical examples were presented for the heat transfer and Euler- Bernoulli beam theory. The examples for heat transfer included: a differential equation having the same form as the governing equation, heat transfer in a fin, heat transfer in a bar and axisymmetric heat transfer in a long cylinder. These problems were solved using both least squares models, and the full form weak form Galerkin model. With all four examples the weak form Galerkin model and the full form least squares model produced accurate results for the primary variables. To obtain accurate results with the mixed form least squares model it is necessary to use at least a quadratic polynominal. The least squares models with the appropriate approximation functions yielde more accurate results for the secondary variables than the weak form Galerkin. The examples presented for the beam problem include: a cantilever beam with linearly varying distributed load along the beam and a point load at the end, a simply supported beam with a point load in the middle, and a beam fixed on both ends with a distributed load varying cubically. The first two examples were solved using the least squares model based on the second order equation and a weak form Galerkin model based on the full form of the equation. The third problem was solved with the least squares model based on the second order equation. Both the least squares model and the Galerkin model calculated accurate results for the primary variables, while the least squares model was more accurate on the secondary variables. In general, the least-squares finite element models yield more acurate results for gradients of the solution than the traditional weak form Galkerkin finite element models. Extension of the present assessment to multi-dimensional problems and nonlinear provelms is awaiting attention.

The conventional finite element models (FEM) of problems in structural mechanics are based on the principles of virtual work and the total potential energy. In these models, the secondary variables, such as the bending moment and shear force, are post-computed and do not yield good accuracy. In addition, in the case of the Timoshenko beam theory, the element with lower-order equal interpolation of the variables suffers from shear locking. In both Euler-Bernoulli and Timoshenko beam theories, the elements based on weak form Galerkin formulation also suffer from membrane locking when applied to geometrically nonlinear problems. In order to alleviate these types of locking, often reduced integration techniques are employed. However, this technique has other disadvantages, such as hour-glass modes or spurious rigid body modes. Hence, it is desirable to develop alternative finite element models that overcome the locking problems. Least-squares finite element models are considered to be better alternatives to the weak form Galerkin finite element models and, therefore, are in this study for investigation. The basic idea behind the least-squares finite element model is to compute the residuals due to the approximation of the variables of each equation being modeled, construct integral statement of the sum of the squares of the residuals (called least-squares functional), and minimize the integral with respect to the unknown parameters (i.e., nodal values) of the approximations. The least-squares formulation helps to retain the generalized displacements and forces (or stress resultants) as independent variables, and also allows the use of equal order interpolation functions for all variables. In this thesis comparison is made between the solution accuracy of finite element models of the Euler-Bernoulli and Timoshenko beam theories based on two different least-square models with the conventional weak form Galerkin finite element models. The developed models were applied to beam problems with different boundary conditions. The solutions obtained by the least-squares finite element models found to be very accurate for generalized displacements and forces when compared with the exact solutions, and they are more accurate in predicting the forces when compared to the conventional finite element models.

The highly optimized performance of nature’s creations and biological assemblies has inspired the development of their engineered counter parts that can potentially outperform conventional systems. In particular, bat wings are populated with air flow hair receptors which feedback the information about airflow over their surfaces for enhanced stability and maneuverability during their flight. The hairs in the bat wing membrane play a role in the maneuverability tasks, especially during low-speed flight. The developments of artificial hair sensors (AHS) are inspired by biological hair cells in aerodynamic feedback control designs. Current mathematical models for hair receptors are limited by strict simplifying assumptions of creeping flow hair Reynolds number on AHS fluid-structure interaction (FSI), which may be violated for hair structures integrated on small-scaled Unmanned Aerial Vehicles (UAVs). This study motivates by an outstanding need to understand the dynamic response of hair receptors in flow regimes relevant to bat-scaled UAVs. The dynamic response of the hair receptor within the creeping flow environment is investigated at distinct freestream velocities to extend the applicability of AHS to a wider range of low Reynolds number platforms. Therefore, a threedimensional FSI model coupled with a finite element model using the computational fluid dynamics (CFD) is developed for a hair-structure and multiple hair-structures in the airflow. The Navier-Stokes equations including continuity equation are solved numerically for the CFD model. The grid independence of the FSI solution is studied from the simulations of the hairstructure mesh and flow mesh around the hair sensor. To describe the dynamic response of the hair receptors, the natural frequencies and mode shapes of the hair receptors, computed from the finite element model, are compared with the excitation frequencies in vacuum. This model is described with both the boundary layer effects and effects of inertial forces due to fluid-structure xiv interaction of the hair receptors. For supporting the FSI model, the dynamic response of the hair receptor is also validated considering the Euler-Bernoulli beam theory including the steady and unsteady airflow.

This study focuses on assessing the accuracy of the Euler-Bernoulli beam theory as computational bases to calculate strain and deflection of composite sandwich beam subjected to three-point and four-point bending. Two groups of composite sandwich beams tests results will be used for comparison purposes. Mechanical properties for the laminated skin are provided by researchers from University of Mississippi (Ellen Lackey et al., 2000). Mechanical properties for the balsa wood core are provided by Alcan Baltek Corporation. Appropriate material properties and test geometries are then used in the Euler-Bernoulli-based algorithm in order to generate analytical data for comparison to experimental data provided by researchers from University of New Orleans (UNO, 2005). The resulting single material cross section is then analyzed in the traditional manner using the Euler-Bernoulli beam theory. In general, the Euler-Bernoulli beam theory provides an appropriate analytical approach in predicting flexural behavior of composite sandwich beams.

This thesis work provides an insight into the design of Force-amplifying Compliant Mechanisms (FaCMs) that are integrated with micromachined resonant accelerometers to increase their sensitivity. An FaCM, by mechanically amplifying the inertial force, enhances the shift in the resonance frequency of the beams used for sensing the acceleration whose effect causes an axial force on the beams. An extensive study on different configurations of resonators namely, single beam resonator, single-ended tuning fork (SETF), and double-ended tuning fork (DETF), is carried out to gain insights about their resonant behavior. The influence of the boundary conditions on the sensor’s sensitivity emerged from the study. We found that not only the force-amplification factor but also the multi-axial stiffness of the FaCM and proof-mass influence the resonance frequency of the resonator as well as the bandwidth of the modified sensor for certain configurations but not all. Thus, four lumped parameters were identified to quantify the effectiveness of an FaCM. These parameters determine the boundary condition of the sensing beams and also the forces and the moment transmitted to them. Also presented in this work is a computationally efficient model, called the Lumped Parameter Model (LPM) for evaluation of the sensitivity. An analytical expression for the frequency-shift of the sensing resonator beams is obtained by considering the FaCM stiffness parameters as well as the lumped stiffness of the suspension of the inertial mass. Various FaCMs are evaluated and compared to understand how the four lumped parameters influence the sensor’s sensitivity. The FaCMs are synthesized using topology optimization to maximize the net amplification factor with the volume constraint. One of the FaCMs outperforms the lever by a factor of six. Microfabrication of resonant accelerometer coupled with FaCM and comb-drive actuator is carried out using a silicon-on-insulator process. Finally, the selection map technique, a compliant mechanism redesign methodology is used for enhancing the amplification of FaCMs. This technique provides scope for further design improvement in FaCMs for given sensor specifications.

A computational framework for linear static aeroelastic analyses is presented. The overall aeroelasticity model is applicable to conceptual aircraft design studies and other low-fidelity aero-structural analyses. A partitioned approach is used, i. e. separate solvers for aerodynamics and structure analyses are coupled in a suitable way, together forming a model for aeroelastic simulations. Aerodynamics are modelled using the vortexlattice method (VLM), a simple computational fluid dynamics (CFD) model based on potential flow. The structure is represented by a three-dimensional (3D) Euler-Bernoulli beam model in a finite element method (FEM) formulation. A particular focus was put on the modularity and loose coupling of aforementioned models. The core of the aeroelastic framework was abstracted, such that it does not depend on any specific details of the underlying aerodynamics and structure modules. The final aeroelasticity model constitutes independent software tools for the VLM and the beam FEM, as well as a framework enabling the aeroelastic coupling. These different tools have been developed as part of this thesis work. A wind tunnel experiment with a simple wing model is presented as a validation test case. An aero-structural analysis of a fully elastic unmanned aerial vehicle (UAV) (OptiMale) is described and results are compared with an existing higherfidelity study. / Rapporten beskriver en beräkningsmodell för linjära, statisk aeroelastiska analyser. Modellen kan användas för konceptuella designstudier av flygplan. En partitionerad metod används, d v s separata lösare för aerodynamik- och strukturanalyser kopplas på ett lämpligt sätt, och bildar tillsammans en modell för aeroelastiska simulationer. Aerodynamik modelleras med hjälp av en så kallad vortex-lattice method (VLM), en enkel modell för beräkningsströmningsdynamik (CFD) som är baserad på friktionsfri strömning. Strukturen representeras av en tredimensionell (3D) Euler-Bernoulli-balkmodell implementerad med hjälp av en finita elementmetod (FEM). Ovannämnda modeller har utvecklats med fokus på modularitet och lös koppling. Kärnan i den aeroelastiska modellen har abstraherats så att den inte beror på specifika detaljer i de underliggande aerodynamik- och strukturmodulerna. Aeroelasticitetsmodellen i sin helhet består av separata mjukvaruprogram för VLM och balk-FEM, såväl som ett ramverk som möjliggör den aeroelastiska kopplingen. Dessa olika program har utvecklats som en del av examensarbetet. Ett vindtunnelförsök med en enkel vingmodell presenteras som ett valideringstest. Dessutom beskrivs en analys av ett elastiskt obemannad flygplan (OptiMale) och resultaten jämförs med en befintlig studie som har genomförts med modeller av högre trovärdighet.

The thesis presents a novel computational method for analysing the static and dynamic behaviour of a multi-damaged beam using local and non-local elasticity theories. Most of the lumped damage beam models proposed to date are based on slender beam theory in classical (local) elasticity and are limited by inaccuracies caused by the implicit assumption of the Euler-Bernoulli beam model and by the spring model itself, which simplifies the real beam behaviour around the crack. In addition, size effects and material heterogeneity cannot be taken into account using the classical elasticity theory due to the absence of any microstructural parameter. The proposed work is based on the inhomogeneous Euler-Bernoulli beam theory in which a Dirac's delta function is added to the bending flexibility at the position of each crack: that is, the severer the damage, the larger is the resulting impulsive term. The crack is assumed to be always open, resulting in a linear system (i.e. nonlinear phenomena associated with breathing cracks are not considered). In order to provide an accurate representation of the structure's behaviour, a new multi-cracked beam element including shear effects and rotatory inertia is developed using the flexibility approach for the concentrated damage. The resulting stiffness matrix and load vector terms are evaluated by the unit-displacement method, employing the closed-form solutions for the multi-cracked beam problem. The same deformed shapes are used to derive the consistent mass matrix, also including the rotatory inertia terms. The two-node multi-damaged beam model has been validated through comparison of the results of static and dynamic analyses for two numerical examples against those provided by a commercial finite element code. The proposed model is shown to improve the computational efficiency as well as the accuracy, thanks to the inclusion of both shear deformations and rotatory inertia. The inaccuracy of the spring model, where for example for a rotational spring a finite jump appears on the rotations' profile, has been tackled by the enrichment of the elastic constitutive law with higher order stress and strain gradients. In particular, a new phenomenological approach based upon a convenient form of non-local elasticity beam theory has been presented. This hybrid non-local beam model is able to take into account the distortion on the stress/strain field around the crack as well as to include the microstructure of the material, without introducing any additional crack related parameters. The Laplace's transform method applied to the differential equation of the problem allowed deriving the static closed-form solution for the multi-cracked Euler-Bernoulli beams with hybrid non-local elasticity. The dynamic analysis has been performed using a new computational meshless method, where the equation of motions are discretised by a Galerkin-type approximation, with convenient shape functions able to ensure the same grade of approximation as the beam element for the classical elasticity. The importance of the inclusion of microstructural parameters is addressed and their effects are quantified also in comparison with those obtained using the classical elasticity theory.

This thesis is about using structural-dynamics based methods to address the existing challenges in the field of Structural Health Monitoring (SHM). Particularly, new structural-dynamics based methods are presented, to model areas of damage, to do damage diagnosis and to estimate and predict the sensitivity of structural vibration properties like natural frequencies to the presence of damage. Towards these objectives, a general analytical procedure, which yields nth-order expressions governing mode shapes and natural frequencies and for damaged elastic structures such as rods, beams, plates and shells of any shape is presented. Features of the procedure include the following: 1. Rather than modeling the damage as a fictitious elastic element or localized or global change in constitutive properties, it is modeled in a mathematically rigorous manner as a geometric discontinuity. 2. The inertia effect (kinetic energy), which, unlike the stiffness effect (strain energy), of the damage has been neglected by researchers, is included in it. 3. The framework is generic and is applicable to wide variety of engineering structures of different shapes with arbitrary boundary conditions which constitute self adjoint systems and also to a wide variety of damage profiles and even multiple areas of damage. To illustrate the ability of the procedure to effectively model the damage, it is applied to beams using Euler-Bernoulli and Timoshenko theories and to plates using Kirchhoff's theory, supported on different types of boundary conditions. Analytical results are compared with experiments using piezoelectric actuators and non-contact Laser-Doppler Vibrometer sensors. Next, the step of damage diagnosis is approached. Damage diagnosis is done using two methodologies. One, the modes and natural frequencies that are determined are used to formulate analytical expressions for a strain energy based damage index. Two, a new damage detection parameter are identified. Assuming the damaged structure to be a linear system, the response is expressed as the summation of the responses of the corresponding undamaged structure and the response (negative response) of the damage alone. If the second part of the response is isolated, it forms what can be regarded as the damage signature. The damage signature gives a clear indication of the damage. In this thesis, the existence of the damage signature is investigated when the damaged structure is excited at one of its natural frequencies and therefore it is called ``partial mode contribution". The second damage detection method is based on this new physical parameter as determined using the partial mode contribution. The physical reasoning is verified analytically, thereupon it is verified using finite element models and experiments. The limits of damage size that can be determined using the method are also investigated. There is no requirement of having a baseline data with this damage detection method. Since the partial mode contribution is a local parameter, it is thus very sensitive to the presence of damage. The parameter is also shown to be not affected by noise in the detection ambience.

Rotating and non-rotating beams are widely used to model important engineering struc-tures. Hence, the vibration analyses of these beams are an important problem from a structural dynamics point of view. Depending on the beam dimensions, they are mod-eled using different beam theories. In most cases, the governing differential equations of these types of beams do not yield any simple closed-form solutions; hence we look for the inverse problem approach in determining the beam property variations given certain solutions. The long and slender beams are generally modeled using the Euler-Bernoulli beam theory. Under the premise of this theory, we study (i) the second mode tailoring of non-rotating beams having six different boundary conditions, (ii) closed-form solutions for free vibration analysis of free-free beams, (iii) closed-form solutions for free vibration analysis for gravity-loaded cantilever beams, (iv) closed-form solutions for free vibration analysis of rotating cantilever and pinned-free beams and (v) beams with shared eigen-pair. Short and thick beams are generally modeled using the Timoshenko beam theory. Here, we provide analytical closed-form solutions for the free vibration analysis of ro-tating non-homogeneous Timoshenko beams. The Rayleigh beam provides a marginal improvement over the Euler-Bernoulli beam theory without venturing into the math-ematical complexities of the Timoshenko beam theory. Under this theory, we provide closed-form solutions for the free vibration analysis of cantilever Rayleigh beams under three different axial loading conditions - uniform loading, gravity-loading and centrifu-gally loaded. We assume simple polynomial mode shapes which satisfy the different boundary conditions of a particular beam, and derive the corresponding beam property variations. In case of the shared eigenpair, we use the mode shape of a uniform beam which has a closed-form solution and use it to derive the stiffness distribution of a corresponding axially loaded beam having same length, mass variation and boundary condition. For the Timoshenko beam, we assume polynomial functions for the bending displacement and the rotation due to bending. The derived properties are demonstrated as benchmark analytical solutions for approximate and numerical methods used for the free vibration analysis of beams. They can also aid in designing actual beams for a pre-specified frequency or nodal locations in some cases. The effect of different parameters in the derived property variations and the bounds on the pre-specified frequencies and nodal locations are also studied for certain cases. The derived analytical solutions can also serve as a benchmark solution for different statistical simulation tools to find the probabilistic nature of the derived stiffness distri-bution for known probability distributions of the pre-specified frequencies. In presence of uncertainty, this flexural stiffness is treated as a spatial random field. For known probability distributions of the natural frequencies, the corresponding distribution of this field is determined analytically for the rotating cantilever Euler-Bernoulli beams. The derived analytical solutions are also used to derive the coefficient of variation of the stiffness distribution, which is further used to optimize the beam profile to maximize the allowable tolerances during manufacturing.

Advances in the design and manufacturing technologies have greatly enhanced the utility of fiber reinforced composite materials in aircraft, helicopter and space- craft structural components. The special characteristics of composites such as high strength and stiffness, light-weight corrosion resistance make them suitable sub- stitute for metals/metallic alloys. However, composites are very sensitive to the anomalies induced during their fabrication and service life. Also, they are suscepti- ble to the impact and high frequency loading conditions because the epoxy matrix is at-least an order of magnitude weaker than the embedded reinforced carbon fibers. On the other hand, the carbon based matrix posses high electrical conductivity which is often undesirable. Subsequently, the metal matrix produces high brittleness. Var- ious forms of damage in composite laminates can be identified as indentation, fiber breakage, matrix cracking, fiber-matrix debonding and interply disbonding (delam- ination). Among all the damage modes mentioned above, delamination has been found to be serious for all cases of loading. They are caused by excessive interlaminar shear and normal stresses. The interlaminar stresses that arise in the case of composite materials due to the mismatch in the elastic constants across the plies. Delamination in composites reduce it’s tensile and compressive strengths by consid- erable margins. Hence the knowledge of these stresses is the most important aspect to be looked into. Basic theories like the Euler-Bernoulli’s theory and Timoshenko beam theory are based on many assumptions which poses limitation to determine these stresses accurately. Hence the determination of these interlaminar stresses accurately requires higher order theories to be considered. Most of the conventional methods of determination of the stresses are through the solutions, involving the trigonometric series, which are available only to small and simple problems. The most common method of solution is by Finite Element (FE) Method. There are only few elements existing in the literature and very few in the commercially available finite element software to determine the interlaminar stresses accurately in the composite laminates. Accuracy of finite element solution depends on the choice of functions to be used as interpolating polynomials for the field variable. In-appropriate choice will manifest in the form of delayed convergence. This delayed convergence and accuracy in predicting these stresses necessiates a formulation of elements with a completely new concept. The delayed convergence is sometimes attributed to the shear locking phenomena, which exist in most finite element formulation based on shear deformation theories. The present work aims in developing finite elements based on higher order theories, that alleviates the slow convergence and achieves the solutions at a faster rate without compromising on the accuracy. The accuracy primarily depends on the theory used to model the problem. Thus the basic theories (such as Elementary Beam theory and Timoshenko Beam theory) does not suffice the condition to accuratley determine the interlaminar stresses through the thickness, which is the primary cause for delamination in composites. Two different elements developed on the principle of super-convergence has been presented in this work. These elements are subjected to several numerical experiments and their performance is assessed by comparing the solutions with those available in literature. Spacecraft and aircraft structures are light in weight and are also lightly damped because of low internal damping of the material of construction. This increased exibility may allow large amplitude vibration, which might cause structural instability. In addition, they are susceptible to impact loads of very short duration, which excites many structural modes. Hence, structural dynamics and wave propagation study becomes a necessity. The wave based techniques have found appreciation in many real world problems such as in Structural Health Monitoring (SHM). Wave propagation problems are characterized by high frequency loads, that sets up stress waves to propagate through the medium. At high frequency, the wave lengths are small and from the finite element point of view, the element sizes should be of the same order as the wave lengths to prevent free edges of the element to act as a free boundary and start reflecting the stress waves. Also longer element size makes the mass distribution approximate. Hence for wave propagation problems, very large finite element mesh is an absolute necessity. However, the finite element problems size can be drastically reduced if we characterize the stiffness of the structure accurately. This can accelerate the convergence of the dynamic solution significantly. This can be acheived by the super-convergent formulation. Numerical results are presented to illustrate the efficiency of the new approach in both the cases of dynamic studies viz., the free vibration study and the wave propagation study. The thesis is organised into five chapters. A brief organization of the thesis is presented below, Chapter-1 gives the introduction on composite material and its constitutive law. The details of shear locking phenomena and the interlaminar stress distribution across the thickness is brought out and the present methods to avoid shear locking has been presented. Chapter-2 presents the different displacement based higher order shear deformation theories existing in the literature their advantages and limitations. Chapter-3 presents the formulation of a super-convergent finite element formulation, where the effect of lateral contraction is neglected. For this element static and free vibration studies are performed and the results are validated with the solution available in the open literature. Chapter-4 presents yet another super-convergent finite element formulation, wherein the higher order effects due to lateral contraction is included in the model. In addition to static and free vibration studies, wave propagation problems are solved to demonstrate its effectiveness. In all numerical examples, the super-convergent property is emphasized. Chapter-5 gives a brief summary of the total research work performed and presents further scope of research based on the current research.