1 |
Precision Control of High Speed Ball Screw DrivesKamalzadeh, Amin January 2008 (has links)
Industrial demands for higher productivity rates and more stringent part tolerances require faster production machines that can produce, assemble, or manipulate parts at higher speeds and with better accuracy than ever before. In a majority of production machines, such as machine tools, ball screw drives are used as the primary motion delivery mechanism due to their reasonably high accuracy, high mechanical stiffness, and low cost. This brings the motivation for the research in this thesis, which has been to develop new control techniques that can achieve high bandwidths near the structural frequencies of ball screw drives, and also compensate for various imperfections in their motion delivery, so that better tool positioning accuracy can be achieved at high speeds.
A precision ball screw drive has been designed and built for this study. Detailed dynamic modeling and identification has been performed, considering rigid body dynamics, nonlinear friction, torque ripples, axial and torsional vibrations, lead errors, and elastic deformations. Adaptive Sliding Mode Controller (ASMC) is designed based on the rigid body dynamics and notch filters are used to attenuate the effect of structural resonances. Feedforward friction compensation is also added to improve the tracking accuracy at velocity reversals. A bandwidth of 223 Hz was achieved while controlling the rotational motion of the ball screw, leading to a servo error equivalent to 1.6 um of translational motion.
The motor and mechanical torque ripples were also modeled and compensated in the control law. This improved the motion smoothness and accuracy, especially at low speeds and low control bandwidths. The performance improvement was also noticeable when higher speeds and control bandwidths were used. By adding on the torque ripple compensation, the rotational tracking accuracy was improved to 0.95 um while executing feed motions with 1 m/sec velocity and 1 g acceleration.
As one of the main contributions in this thesis, the dynamics of the 1st axial mode (at 132 Hz) were actively compensated using ASMC, which resulted in a command tracking bandwidth of 208 Hz. The mode compensating ASMC (MC-ASMC) was also shown to improve the dynamic stiffness of the drive system, around the axial resonance, by injecting additional damping at this mode. After compensating for the lead errors as well, a translational tracking accuracy of 2.6 um was realized while executing 1 m/sec feed motions with 0.5 g acceleration transients. In terms of bandwidth, speed, and accuracy, these results surpass the performance of most ball screw driven machine tools by 4-5 times.
As the second main contribution in this thesis, the elastic deformations (ED) of the ball screw drive were modeled and compensated using a robust strategy. The robustness originates from using the real-time feedback control signal to monitor the effect of any potential perturbations on the load side, such as mass variations or cutting forces, which can lead to additional elastic deformations. In experimental results, it is shown that this compensation scheme can accurately estimate and correct for the elastic deformation, even when there is 130% variation in the translating table mass. The ED compensation strategy has resulted in 4.1 um of translational accuracy while executing at 1 m/sec feed motion with 0.5 g acceleration transients, without using a linear encoder. This result is especially significant for low-cost CNC (Computer Numerically Controlled) machine tools that have only rotary encoders on their motors. Such machines can benefit from the significant accuracy improvement provided by this compensation scheme, without the need for an additional linear encoder.
|
2 |
Precision Control of High Speed Ball Screw DrivesKamalzadeh, Amin January 2008 (has links)
Industrial demands for higher productivity rates and more stringent part tolerances require faster production machines that can produce, assemble, or manipulate parts at higher speeds and with better accuracy than ever before. In a majority of production machines, such as machine tools, ball screw drives are used as the primary motion delivery mechanism due to their reasonably high accuracy, high mechanical stiffness, and low cost. This brings the motivation for the research in this thesis, which has been to develop new control techniques that can achieve high bandwidths near the structural frequencies of ball screw drives, and also compensate for various imperfections in their motion delivery, so that better tool positioning accuracy can be achieved at high speeds.
A precision ball screw drive has been designed and built for this study. Detailed dynamic modeling and identification has been performed, considering rigid body dynamics, nonlinear friction, torque ripples, axial and torsional vibrations, lead errors, and elastic deformations. Adaptive Sliding Mode Controller (ASMC) is designed based on the rigid body dynamics and notch filters are used to attenuate the effect of structural resonances. Feedforward friction compensation is also added to improve the tracking accuracy at velocity reversals. A bandwidth of 223 Hz was achieved while controlling the rotational motion of the ball screw, leading to a servo error equivalent to 1.6 um of translational motion.
The motor and mechanical torque ripples were also modeled and compensated in the control law. This improved the motion smoothness and accuracy, especially at low speeds and low control bandwidths. The performance improvement was also noticeable when higher speeds and control bandwidths were used. By adding on the torque ripple compensation, the rotational tracking accuracy was improved to 0.95 um while executing feed motions with 1 m/sec velocity and 1 g acceleration.
As one of the main contributions in this thesis, the dynamics of the 1st axial mode (at 132 Hz) were actively compensated using ASMC, which resulted in a command tracking bandwidth of 208 Hz. The mode compensating ASMC (MC-ASMC) was also shown to improve the dynamic stiffness of the drive system, around the axial resonance, by injecting additional damping at this mode. After compensating for the lead errors as well, a translational tracking accuracy of 2.6 um was realized while executing 1 m/sec feed motions with 0.5 g acceleration transients. In terms of bandwidth, speed, and accuracy, these results surpass the performance of most ball screw driven machine tools by 4-5 times.
As the second main contribution in this thesis, the elastic deformations (ED) of the ball screw drive were modeled and compensated using a robust strategy. The robustness originates from using the real-time feedback control signal to monitor the effect of any potential perturbations on the load side, such as mass variations or cutting forces, which can lead to additional elastic deformations. In experimental results, it is shown that this compensation scheme can accurately estimate and correct for the elastic deformation, even when there is 130% variation in the translating table mass. The ED compensation strategy has resulted in 4.1 um of translational accuracy while executing at 1 m/sec feed motion with 0.5 g acceleration transients, without using a linear encoder. This result is especially significant for low-cost CNC (Computer Numerically Controlled) machine tools that have only rotary encoders on their motors. Such machines can benefit from the significant accuracy improvement provided by this compensation scheme, without the need for an additional linear encoder.
|
3 |
DIGITAL TWIN MACHINE TOOL FEED DRIVE TEST BENCH FOR RESEARCH ON CONDITION MONITORING AND MODELING / DIGITAL TWIN MACHINE TOOL FEED DRIVE TEST BENCHSicard, Brett January 2024 (has links)
Machine tools are essential components of modern manufacturing. They are com posed of various mechanical, hydraulic, and electrical systems such as the spindle,
tool changer, cooling system, and the linear and rotary feed drives. Due to their com plexity, high cost, and importance to the manufacturing process it is recommended to
implement some sort of condition monitoring and predictive maintenance to ensure
that they remain reliable and high performing. One way of potentially implement ing predictive maintenance and condition monitoring is digital twins. Digital twins
enable the real-time, accurate, and complex modeling and monitoring of mechanical
systems. They utilize data collected from the system to constantly update their mod els which can be used for monitoring of the systems state and future predictions. This
work presents a digital twin workbench of a machine tool feed drive. The workbench
enables the collection and analysis of large, varied, high-frequency data which can be
used to construct a digital twin of the feed drive. A digital twin can enable many
other useful functionalities. Some of these functionalities include condition moni toring, modeling, control, visualization, and simulation. These functionalities can
enable maximum asset performance and are key in implementing effective predictive
maintenance. The main contributions of this work are the following: The design and
iv
construction of a machine tool feed drive which implements a novel external distur bance force method. A new method of fault detection in ball screws using interacting
multiple models which was shown to provide accurate estimates of levels of preloads
in a ball screw driven feed drive. A digital twin based modeling strategy and analysis
of the data generated by the system including system modeling and observations on
modeling difficulties. / Thesis / Master of Applied Science (MASc) / Digital twins enable the real-time, accurate, and complex modeling and monitoring
of mechanical systems. Machine tools are essential components of modern manufac turing. They are composed of various mechanical, hydraulic, and electrical systems
such as the spindle, tool changer, cooling system, and linear and rotary feed drives.
This work presents the design of a workbench of a machine tool linear feed drive, a
fault detection strategy, and a digital twin modeling solution. The workbench enables
the collection and analysis of large, varied, high-frequency data which can be used to
construct a digital twin of the feed drive. A digital twin can enable many other useful
functionalities. Some of these functionalities include condition monitoring, modeling,
control, visualization, and simulation. These functionalities can enable maximum
asset performance and are key in implementing effective predictive maintenance.
|
4 |
Повышение точности и быстродействия приводов подач при высокоскоростной токарной обработке : магистерская диссертация / Improving of accuracy and operation speed of feed drive in high speed turningЧепусова, Е. Ю., Chepusova, E. Y. January 2016 (has links)
Цель работы – разработка новых технических средств повышения точности и быстродействия приводов подач металлорежущих станков при высокоскоростном точении.
Проведен анализ погрешностей собственно привода и системы отсчета перемещений, анализ существующих способов борьбы с погрешностями. На его основе разработаны следящий привод подачи металлорежущего станка, система отсчета перемещений рабочего органа машины, методика настройки системы отсчета перемещений рабочего органа станка и алгоритм настройки компенсирующей цепи системы отсчета перемещений с использованием ПК. Данные средства точнее существующих.
В ходе работы над магистерской диссертацией, было получено 2 патента (№160849 Следящий привод подачи металлорежущего станка и №154592 Система отсчета перемещений рабочего органа машины). Участие во Всероссийской молодежной научно-практической конференции «Региональные программы и проекты в области интеллектуальной собственности глазами молодежи». Тезис доклада опубликован в сборнике трудов конференции. / The purpose of the work is the development of new technical ways to improve the accuracy and operation speed of feed drive of machine tools in high-speed turning.
The analysis of accuracy of feed drive and reference frame of driven element displacement, existing ways of errors elimination was carried out. The analysis was used in order to design follower feed drive feed of machine tool, reference frame of driven element displacement of the machine tool, tuning method of reference frame of driven element displacement of the machine tool and tuning algorithm of bucking circuit of reference frame of driven element displacement with using a PC. Developed solutions give more accurate results.
During the work on the master's thesis author received 2 patents of RF (№160849 Follower drive feed of machine tool and Reference frame of driven element displacement of the machines). The work participated in the All-Russian youth scientific conference "Regional programs and projects in the field of intellectual property through the eyes of young people". Abstracts of the report are published in the conference digest.
|
5 |
Integrated Design of Servo Mechatronic Systems for Driving Performance ImprovementChen, Chin-yin 05 February 2009 (has links)
The servo mechatronic system design process usually covers two different engineering domains: structure design and system control. The relationship between these two domains is much closed. In order to reduce the disturbance caused by parameters in either one, the domain knowledge from those two different fields needs to be integrated. Thus, in order to reduce the disturbance caused by parameters in either one, the mechanical and controller design domains need to be integrated. Therefore, the integrated design method Design For Control (DFC), will be employed in this thesis. In this connect, it is not only applied to achieve minimal power consumption but also enhance structural performance and system response at same time. To investigate for the integrated design method, there are two common servo mechatronic systems: feed drive system and legged servo mechatronic system are used as the design platform.
1. Mechatronic Feed Drive System
To investigate the method for integrated optimization, a mechatronic feed drive system of the machine tools is used as a design platform. The 3D software, Pro/Engineer is first used to build the 3D model to analyze and design structure parameters such as elastic deformation, nature frequency and component size, based on their effects and sensitivities to the structure. Additionally, in order to achieve system robust, Quantitative Feedback Theory (QFT), will be applied to determine proper control parameters for the controller. Therefore, overall physical properties of the machine tool will be obtained in the initial stage. Following this Design Then Control process, the iterative design process is following to enhance some of system performance. Finally, the technology design for control will be carried out to modify the structural and control parameters to achieve overall system performance. Hence, the corresponding productivity is expected to be greatly improved.
2. Legged Servo Mechatronic System
The goal of this study is to develop a one-degree-of-freedom (DOF) legged servo mechatronic system with DFC. For this system, the kinematics and control dynamic analysis of legged servo mechatronic system have been solved by using four bar linkage with symmetrical coupler point, pantograph, and common position and velocity controller. In addition, in order to improvement system dynamic performance and reduce the control cost, the counterweight, that base on mass redistribution is employed to integrate structure and control into one design step for reduce shaking moment. Additionally, in order to improvement the system performance, the complete force balance is not only to take advantage of control cost, but also easy to control.
|
Page generated in 0.0244 seconds