A large inventory of low rise masonry buildings in Canada and elsewhere in the world were built using unreinforced or partially reinforced load bearing wall. The majority of existing masonry structures is deficient in resisting seismic force demands specified in current building codes. Therefore, they pose significant risk to life safety and economic wellbeing of any major metropolitan centre. Because it is not economically feasible to replace the existing substandard buildings with new and improved structures, seismic retrofitting remains to be an economically viable option. The effectiveness of surface bonded carbon fiber-reinforced polymer (CFRP) sheets in retrofitting low-rise load bearing masonry walls was investigated in the current research project. The retrofit technique included the enhancements in wall capacity in shear and flexure, as well as anchoring the walls to the supporting elements through appropriate anchorage systems. Both FRP fan type anchors and steel sheet anchors were investigated for elastic and inelastic wall response. One partially reinforced masonry (PRM) wall and one unreinforced masonry (URM) wall were built, instrumented and tested under simulated seismic loading to develop the retrofit technique. The walls were retrofitted with CFRP sheets applied only on one side to represent a frequently encountered constraint in practice. FRP fan anchors and stainless steel sheet anchors were used to connect the vertical FRP sheets to the wall foundation. The walls were tested under constant gravity load and incrementally increasing in-plane deformation reversals. The lateral load capacities of both walls were enhanced significantly. The steel sheet anchors also resulted in some ductility. In addition, some small-scale tests were performed to select appropriate anchor materials. It was concluded that ductile stainless steel sheet anchors would be the best option for brittle URM walls. Analytical research was conducted to assess the applicability of truss analogy to retrofitted walls. An analytical model was developed and load displacement relationships were generated for the two walls that were retrofitted. The analytical results were compared with those obtained experimentally, indicating good agreement in force resistance for use as a design tool.

A large inventory of low rise masonry buildings in Canada and elsewhere in the world were built using unreinforced or partially reinforced load bearing wall. The majority of existing masonry structures is deficient in resisting seismic force demands specified in current building codes. Therefore, they pose significant risk to life safety and economic wellbeing of any major metropolitan centre. Because it is not economically feasible to replace the existing substandard buildings with new and improved structures, seismic retrofitting remains to be an economically viable option. The effectiveness of surface bonded carbon fiber-reinforced polymer (CFRP) sheets in retrofitting low-rise load bearing masonry walls was investigated in the current research project. The retrofit technique included the enhancements in wall capacity in shear and flexure, as well as anchoring the walls to the supporting elements through appropriate anchorage systems. Both FRP fan type anchors and steel sheet anchors were investigated for elastic and inelastic wall response. One partially reinforced masonry (PRM) wall and one unreinforced masonry (URM) wall were built, instrumented and tested under simulated seismic loading to develop the retrofit technique. The walls were retrofitted with CFRP sheets applied only on one side to represent a frequently encountered constraint in practice. FRP fan anchors and stainless steel sheet anchors were used to connect the vertical FRP sheets to the wall foundation. The walls were tested under constant gravity load and incrementally increasing in-plane deformation reversals. The lateral load capacities of both walls were enhanced significantly. The steel sheet anchors also resulted in some ductility. In addition, some small-scale tests were performed to select appropriate anchor materials. It was concluded that ductile stainless steel sheet anchors would be the best option for brittle URM walls. Analytical research was conducted to assess the applicability of truss analogy to retrofitted walls. An analytical model was developed and load displacement relationships were generated for the two walls that were retrofitted. The analytical results were compared with those obtained experimentally, indicating good agreement in force resistance for use as a design tool.

Within the past few decades a new technology has emerged using Fiber Reinforced Polymers (FRP) to rehabilitate and retrofit reinforced concrete (RC) structures. In FRP shear strengthening applications it is largely recognized that debonding is the prevailing failure mode. FRP debonding typically occurs prematurely as a brittle failure mode that limits the efficiency of the strengthening technique. No systematic tests have been conducted to investigate the capacity gained by anchoring FRP laminates to RC elements in shear applications. The objective of this research program was to study the effects of anchoring FRP laminates to RC members with FRP anchors thereby delaying or potentially eliminating debonding of FRP sheets from the concrete surface. FRP anchors used in this research were made from fibers used as part of FRP sheets that get bundled into a roll with a fanned upper end of the anchor allowing the fibers to be splayed over the FRP sheet. A single shear pull test experiment was developed to study the effects of anchoring FRP laminates using FRP anchors with varying anchor diameters, lengths, and patterning. The results of the experimental portion of this research project were used in combination with finite element analyses to develop models for anchored FRP sheets that can be used in design of shear strengthening applications.

Over the past three decades the use of externally bonded fiber reinforced polymer (FRP) materials for structural strengthening applications has become an accepted and widely used method. A primary concern of FRP structural strengthening systems is that the FRP often debonds from the concrete well before the load capacity of the FRP material is reached. In addition, debonding failures are often brittle and occur with little warning. Past research concluded that fastening FRP sheets with FRP anchors is an effective method for delaying or preventing debonding failures. However, there is a clear lack of research pertaining to fastening FRP sheets with FRP anchors, and a corresponding lack of design guidance. The primary objective of this research program was to better understand the behavior of bonded FRP sheets that are secured with FRP anchors to aid in future development of design recommendations of this anchorage system. This thesis deals with carbon fiber unidirectional sheets applied using the wet layup system. Design parameters that were investigated include: manufacturer of the FRP materials, unanchored and anchored sheets, number of anchor rows and spacing between rows, number of sheet plies (single or double), and length of bonded sheet behind the anchors. A total of sixteen specimens were tested. Experimental results show that FRP anchorage systems are very effective in increasing load capacity by delaying debonding. Finite element models were also developed of anchored and unanchored bonded FRP sheets.