The Swedish electrical grid has historically been robust and reliable, but with increased electrification in numerous sectors, out-phasing of nuclear power and a high market diffusion of wind power, the system is now facing challenges. The rotational energy in the system is expected to decrease as a result of higher shares of intermittent energy sources, which can affect the stability of the grid frequency negatively. To manage increased frequency drops, the new Fast Frequency Reserve (FFR) market will be implemented by June 2020 in the Nordic power system. Simultaneously, it is expected that the demand of electricity will increase significantly in the transport and industry sectors in the coming years. Several DSOs already today indicate challenges with capacity and power security and have or will implement power tariffs as an economic incentive to prevent these problems. For energy intensive customers, such as industries, it will become important to reduce power peaks to avoid high grid fees. Several peak load shaving strategies can be utilized by industries to reduce their power peaks and thus the power tariff. The aim of this study is to economically analyze peak load shaving for Swedish industries. This is done using Li-Ion BESS and DSM, and to maximize the utilization of the BESS by including energy arbitrage and FFR market participation into the analysis. Firstly, a literature review is conducted within the topics of peak load shaving strategies, energy arbitrage and ancillary services. Secondly, data is gathered in collaboration with WSP Systems – Energy, the initiators of the project, to conduct case studies on two different industries. These cases are simulated in the modeling software SAM, for technical analysis, and then economically evaluated with NPV. Also, nine scenarios are created for the emerging FFR market concerning the number of activations per year and the compensation price per activation. The results from the case studies indicate that peak load shaving of 1 – 3 % with BESS provides a positive NPV for both case industries. However, higher percentages result in negative NPVs when no additional revenue streams are included. When considering energy arbitrage, it is concluded that the additional revenues are neglectable for both industries. Participating in the FFR market provides similar trends in the results as before. The exception is valid for scenarios with high numbers of FFR activations and compensation prices, where positive NPVs for all levels of peak load shaving can be concluded. The peak load shaving strategy DSM is implemented for one of the industries, where efficiency measures are concluded to have the most impact on the economic evaluation. If all efficiency measures would be implemented, the electricity consumption would be reduced by 17 %. Additionally, the power peaks would be reduced with 18 % and result in a significantly more positive NPV than peak load shaving using BESS. A sensitivity analysis concerning BESS capital cost and power tariff price concludes that the BESS price has a strong relation to the NPV, where a BESS price reduction of 60 % results in an NPV increase of at least 100 %. BESS prices have decreased the past years and are expected to keep decreasing in the future. Hence, investments in BESS can become more profitable and attractive in the coming years. Finally, for future research, it is recommended to combine the methodology from this study together with a load forecasting method. This combined methodology could then be practically applied to case specific industries with high peak loads. / Det svenska elnätet har historiskt sett varit robust och pålitligt, men i takt med ökad elektrifiering i flera sektorer, utfasning av kärnkraft samt ökad mängd installerad vindkraft ställs nu systemet inför nya utmaningar. Bland annat förväntas rotationsenergin i systemet minska som ett resultat av högre andelar intermittenta energikällor i systemet. För att hantera detta kommer den nya Fast Frequency Reserve (FFR) marknaden finnas tillgänglig från och med juni 2020. Samtidigt förväntas även efterfrågan på el inom transport- och industrisektorn öka markant de kommande åren. Redan idag är effektbrist ett problem i vissa regioner, vilket kan komma att förvärras. Många nätägare ska eller har redan infört effekttariffer för utnyttjande av deras elnät, vilket är ett ekonomiskt incitament för att hantera effektproblematiken där kunder med en mer flexibel elkonsumtion kommer gynnas. För större elförbrukare, som exempelvis industrier, kan det bli ekonomiskt betydelsefullt att sänka sina effekttoppar och därmed undvika höga nätavgifter. För att minska effekttoppar finns ett flertal så kallade peak load shaving-strategier, som kan utnyttjas av industrier för att minska kostnaderna för effekttariffen. Syftet med denna studie är att analysera peak load shaving för svenska industrier, med hjälp av ett Li-Ion batterilagringssystem och efterfrågeflexibilitet, samt maximera utnyttjandet av batteriet genom att inkludera energiarbitrage och deltagande i FFR-marknaden i analysen. Ett första steg i arbetet är att utföra en litteraturstudie för de berörda områdena. I ett andra steg insamlas data tillsammans med WSP, initiativtagaren av projektet, för att kunna göra en fallstudie på två industrier. För dessa fallstudier undersöks de tekniska förutsättningarna för att implementera peak load shaving-strategier genom modellering i simuleringsprogrammet SAM. Sedan utreds de ekonomiska förutsättningarna för fallstudierna, där NPV används som ekonomiskt nyckeltal. Dessutom skapas nio scenarion för den kommande FFR-marknaden för att uppskatta kostnader och inkomster. Resultatet av fallstudien visar att 1 – 3 % kapade effekttoppar med batterilagring ger ett positivt NPV för båda industrierna. Över 3 % blir resultatet negativt utan ytterligare inkomstströmmar inkluderade. Energiarbitrage konstateras att bidra med marginella positiva fördelar. Vid inkludering av FFR-marknaden i analysen erhålls liknande trender i resultaten, bortsett från scenarion med relativt högt antal avrop och pris. I dessa fall blir även 4 – 10 % kapade effekttoppar ekonomiskt attraktiva. För en av industrierna utvärderas efterfrågeflexibilitet, där effektivisering av elkrävande processer har störst inflytande på resultatet. Vid implementering av samtliga effektiviseringsåtgärder skulle elkonsumtionen minska med 17 %. Dessutom minskar effekttopparna med 18 %, vilket resulterar i ett signifikant mer positivt NPV, jämfört med användningen av batterilager. En känslighetsanalys gällande batteripris och effekttariffer, konstaterade att batteripriset har en stark påverkan på NPV. Vid en batteriprisminskning på 60 % ökar NPV med minst 100 %. Därmed kan batteriinvesteringar bli mer gynnsamma och attraktiva om batteripriser fortsätter att falla, vilket flera prognoser indikerar. Slutligen rekommenderas framtida studier att kombinera metodiken från detta arbete med en prognostiseringsmetod för elanvändning i industrier. Denna kombinerade metod kan sedan praktiskt tillämpas på fallspecifika industrier med höga effekttoppar.

How long would modern society cope with a power outage, what would happen to vital systems that we today take for granted in modern society. The Nordic electricity grid is facing a major shift where electricity production from non-renewable sources are to be replaced increasingly by renewable sources. By increasing the penetration of wind and solar power the electric power system might be exposed to disturbances due to decreasing inertia as a result of the electricity transition. Currently the electric power system has different reserves to use to maintain frequency stability but there are other reserves that could help further in the fight for the balance between electricity production and consumption. This project examines whether the new reserve service, fast frequency reserve (FFR), can help the existing frequency containment reserve for disturbed (FCR-D) operation. Therefore, two experiments were conducted using the simulation tool ARISTO, addressing relevant issues involving frequency stability. Motivation for the hypothesis was to investigate if FFR could reduce the frequency transients and improve frequency variations by developing various setups and cases when inertia was retained and when the system inertia was reduced at different stages. The results of the experiments showed that the global minimum frequency, nadir, had increased for all test cases compared to the reference case when using FFR, this proved that the FFR in fact help reducing frequency transients. The results showed furthermore that when the FFR had a duration time of 30 seconds compared to only 5 seconds, the frequency variations could be improved for certain setups for experiment 2.

Electricity providers has a growing interest in moving towards Renewable Energy Sources (RES) for power generation due to their attractive features. This has caused phasing out of coal, oil and nuclear power plants which use large synchronous generators for power production. These large rotational masses provide inertia to the electricity grid which compensate the sudden frequency instabilities of the grid. Therefore, lowering the system inertia opens up to frequency instabilities in the electricity grid.  As a solution for the lower system inertia, the concept of Fast Frequency Reserve (FFR) has been introduced. The timeframe of primary generation reserves can be too slow in case of a sudden frequency instability. Amongst the energy sources that can be used for FFR, this thesis work explores the possibility of a Battery Energy Storage System (BESS) to be used in FFR. To accomplish this objective, a total BESS system including power electronic converters for integration to the grid is designed in this work. The software of choice for simulation is Matlab/Simulink.  This work uses a hybrid battery model proposed by previous research which is a combination of runtime model and Thevenin model. A bidirectional Buck-Boost converter integrated with a current controller has been used as the DC-DC converter. An outer voltage control loop integrated with the inverter dq current controller has been used to connect the BESS to the gird. The function of each subsystem is observed to verify their functionality. The hybrid battery model is tested by comparing results with the battery model available in Simulink. Finally, power delivery to grid under FFR activation requirements is observed.  Results show that the hybrid battery model is a good approximation to represent a real battery cell in electrical grid applications. The simulation time can be reduced by replacing the series battery cell configuration used in this work with the Simulink battery model. The power delivery to the grid shows BESS is a reliable energy resource that can be used for FFR.