Controlling the quantum states of charge (excitons) or spin-polarized carriers in semiconductor quantum dots (QDs) has been the focus of a considerable research effort in recent years due to the strong promise of using this approach to develop solid state quantum computing hardware. The long-term scalability of this type of quantum computing architecture is enhanced by the use of QDs emitting in the telecom band, which would exploit the established photonic infrastructure. This thesis reports the use of all optical infrared experimental techniques to control exciton dynamics in two different QD samples consisting of InAs/GaAs QDs and InAs/InP QDs within a planar microcavity. An infrared quantum control apparatus was developed and used to apply optimized shaping masks to ultrafast pulses from an optical parametric oscillator. Pulse shaping protocols designed to execute a two-qubit controlled-rotation operation on an individual semiconductor QD were demonstrated and characterized. The quantum control apparatus was then implemented in simultaneous single qubit rotations using two uncoupled, distant InAs/GaAs QDs. These optimal control experiments demonstrated high fidelity optical manipulation of exciton states in the two QDs using a single broadband laser pulse, representing a step forward on the path to a scalable QD architecture and showcasing the power of pulse shaping techniques for quantum control on solid state qubits. As an alternative to single QDs, which have very low optical signals, subsets of QDs within an ensemble can be used in quantum computing applications. To investigate the mediation of inhomogeneities in a QD ensemble, pump-probe experiments were performed on InAs/InP QDs within a dielectric Bragg stack microcavity. Two different excitation geometries showed that the angle dependence of the microcavity transmission allowed for the spectral selection of QD subsets with transition energies resonant with the cavity mode. The microcavity mitigated inhomogeneities in the ensemble while providing a basis for addressing QD subsets which could be used as distinguishable quantum bits. This thesis work shows significant advances towards an optical computing architecture using quantum states in semiconductor QDs.

Neste trabalho investigamos a dinâmica de formação de nanopartículas de Au por pulsos de femtossegundos formatados (800 nm, 30 fs, 1 kHz e 2 mJ), induzida pela ionização da molécula de quitosana. Inicialmente desenvolvemos um sistema de formatação de pulsos ultracurtos que faz uso de um modulador espacial de luz, constituído por um arranjo linear de cristais líquidos, com o qual somos capazes de impor distintas modulações de fase ao pulso laser. Para monitorar o processo de produção de nanopartículas, montamos um sistema de excitação (pulsos de femtossegundos) e prova (luz branca), o qual permite a observação em tempo real do aparecimento da banda de plásmon e, consequentemente, da dinâmica de formação das nanopartículas. Resultados obtidos para pulsos não formatados (limitados por Transformada de Fourier) demonstraram que a formação de nanopartículas deve-se à ionização não linear da quitosana, a qual está relacionada à oxidação do grupo hidroxila para o grupo carbonila. Medidas de microscopia eletrônica de transmissão forneceram os tamanhos (entre 20 e 100 nm) e formatos (esferas, pirâmides, hexágonos, bastões, etc) das nanopartículas geradas. Ainda, nossos resultados revelaram que esta ionização é iniciada por absorção multifotônica, mais especificamente por absorção de 4 fótons. Utilizando pulsos formatados com fase espectrais constante, degrau e cossenoidal com diferentes frequências, investigamos a influência destes na formação de nanopartículas. Concluímos que os pulsos mais longos são mais favoráveis ao processo de ionização, e consequente redução dos íons de Au para a formação de nanopartículas metálicas. Este comportamento se deve, provavelmente, à redistribuição da energia absorvida para os modos vibracionais, o que é mais provável para pulsos mais longos. Assim, o método apresentado pode abrir novas maneiras para a formação de nanopartículas de metálicas, as quais podem ser mais exploradas dos pontos de vista aplicado e fundamental. / In this work we have studied the synthesis of Au nanoparticles using shaped ultrashort pulses (800 nm, 30 fs, 1 kHz and 2 mJ), induced by the ionization of the chitosan. Initially we developed a pulse shaping setup that uses a spatial light modulator (liquid crystals array), with which we are able to impose distinct phase mask to the laser pulse. In order to monitor the nanoparticles production process, we used a pump-probe system, consisting of femtosecond pulses (pump) and white light (probe), which allows the observation of the plasmon band enhancement and hence the nanoparticles formation dynamics. The results obtained by Fourier Transform limited pulses have shown that the nanoparticles formation is due to the nonlinear ionization of chitosan, which is related to hydroxyl group oxidation to the carbonyl group. Transmission electron microscopy measurements provided the sizes (20-100 nm) and shapes (spheres, pyramids, hexagons, rods, etc.) of the produced nanoparticles. Moreover, our results revealed that ionization is initiated by multiphoton absorption, more specifically by four photons absorption. Using pulses shaped with constant, step and cossenoidal (with different frequencies) spectral phase masks, we investigated their influence in the nanoparticles formation. We conclude that longer pulses are more favorable to the ionization process and, consequently, to the gold ions reduction for the synthesis of the metallic nanoparticles. This behavior is probably due to the redistribution of the absorbed energy to the vibrational modes, which is more likely for longer pulses. Therefore, the approach presented here can open new ways to produce metallic nanoparticles, which can be further explored from applied and fundamental points of view.

Neste trabalho investigamos a dinâmica de formação de nanopartículas de Au por pulsos de femtossegundos formatados (800 nm, 30 fs, 1 kHz e 2 mJ), induzida pela ionização da molécula de quitosana. Inicialmente desenvolvemos um sistema de formatação de pulsos ultracurtos que faz uso de um modulador espacial de luz, constituído por um arranjo linear de cristais líquidos, com o qual somos capazes de impor distintas modulações de fase ao pulso laser. Para monitorar o processo de produção de nanopartículas, montamos um sistema de excitação (pulsos de femtossegundos) e prova (luz branca), o qual permite a observação em tempo real do aparecimento da banda de plásmon e, consequentemente, da dinâmica de formação das nanopartículas. Resultados obtidos para pulsos não formatados (limitados por Transformada de Fourier) demonstraram que a formação de nanopartículas deve-se à ionização não linear da quitosana, a qual está relacionada à oxidação do grupo hidroxila para o grupo carbonila. Medidas de microscopia eletrônica de transmissão forneceram os tamanhos (entre 20 e 100 nm) e formatos (esferas, pirâmides, hexágonos, bastões, etc) das nanopartículas geradas. Ainda, nossos resultados revelaram que esta ionização é iniciada por absorção multifotônica, mais especificamente por absorção de 4 fótons. Utilizando pulsos formatados com fase espectrais constante, degrau e cossenoidal com diferentes frequências, investigamos a influência destes na formação de nanopartículas. Concluímos que os pulsos mais longos são mais favoráveis ao processo de ionização, e consequente redução dos íons de Au para a formação de nanopartículas metálicas. Este comportamento se deve, provavelmente, à redistribuição da energia absorvida para os modos vibracionais, o que é mais provável para pulsos mais longos. Assim, o método apresentado pode abrir novas maneiras para a formação de nanopartículas de metálicas, as quais podem ser mais exploradas dos pontos de vista aplicado e fundamental. / In this work we have studied the synthesis of Au nanoparticles using shaped ultrashort pulses (800 nm, 30 fs, 1 kHz and 2 mJ), induced by the ionization of the chitosan. Initially we developed a pulse shaping setup that uses a spatial light modulator (liquid crystals array), with which we are able to impose distinct phase mask to the laser pulse. In order to monitor the nanoparticles production process, we used a pump-probe system, consisting of femtosecond pulses (pump) and white light (probe), which allows the observation of the plasmon band enhancement and hence the nanoparticles formation dynamics. The results obtained by Fourier Transform limited pulses have shown that the nanoparticles formation is due to the nonlinear ionization of chitosan, which is related to hydroxyl group oxidation to the carbonyl group. Transmission electron microscopy measurements provided the sizes (20-100 nm) and shapes (spheres, pyramids, hexagons, rods, etc.) of the produced nanoparticles. Moreover, our results revealed that ionization is initiated by multiphoton absorption, more specifically by four photons absorption. Using pulses shaped with constant, step and cossenoidal (with different frequencies) spectral phase masks, we investigated their influence in the nanoparticles formation. We conclude that longer pulses are more favorable to the ionization process and, consequently, to the gold ions reduction for the synthesis of the metallic nanoparticles. This behavior is probably due to the redistribution of the absorbed energy to the vibrational modes, which is more likely for longer pulses. Therefore, the approach presented here can open new ways to produce metallic nanoparticles, which can be further explored from applied and fundamental points of view.

La microscopie multiphotonique est une modalité d’imagerie de pointe offrant des opportunités d’avancées remarquables en biologie mais aussi dans le domaine médical. Afin d’en exploiter pleinement le formidable potentiel au cœur même de la pratique clinique, le développement de nombreuses sondes miniaturisées à fibre optique pour l’endomicroscopie multiphotonique (EMMP) a eu lieu depuis de nombreuses années et dans de nombreux laboratoires français et étrangers. Il s’est pour l'instant confronté à des limitations majeures comme l’impossibilité de recueillir les signaux d’auto-fluorescence des tissus qui sont intrinsèquement faibles comme ceux venant des co-enzymes métaboliques NADH et FAD. Cette limitation compromet l'utilité de l’EMMP en la restreignant à une imagerie morphologique requérant un marquage exogène des tissus. Ce manuscrit présente une architecture d’EMMP permettant de dépasser cette limitation, capable de proposer une imagerie fonctionnelle du métabolisme cellulaire en temps réel, in vivo, in situ, sans marquage. Le prototype d’EMMP proposé est une amélioration du précédent, où les Grisms en réflexions sont remplacés par des Grisms en transmission, permettant d’élargir la bande spectrale d’utilisation et la transmission du système. Ce prototype voit aussi l’adjonction d’un second laser excitateur afin d’accéder aux fluorescences du NADH et du FAD. Les résultats démontrent capable que nous sommes à même d’imager les fluorescences cellulaires intrinsèques au travers de 5 mètres de fibre optique avec une résolution subcellulaire. Parmi celles-ci nous sommes capables d’exciter et de collecter spécifiquement les fluorescences du NADH et du FAD. Enfin nous détectons assez de photons pour disposer d‘informations quantitatives et donc de proposer une image du rapport d’oxydo-réduction optique en endomicroscopie. / Nonlinear microscopy is a cutting edge imaging modality leading to remarkable step forward in biology but also in the clinical field. To use it at its full potential and at the very heart of clinical practice, there has been several development of fiber-based micro-endoscope. The application for those probes is now limited by few major restrictions, such as the impossibility to collect auto-fluorescence signal from tissues theses being inherently weak such as the fluorescence from NADH or FAD. This limitation reduces the usefulness of the micro-endoscope effectively restraining it to morphological imaging modality requiring staining of the tissue. Our aim is to go beyond this limitation, showing cellular metabolism monitoring, in real time, without any staining. The experimental setup is an upgrade of our precedent one where the reflection- based Grism stretcher is replace with a new generation transmission-based Grism stretcher. Another Laser was also added in order to tune the first laser at 860nm to allow FAD imaging and the second one to 760nm for NADH. The results prove that we assess and image the level of NADH and FAD at subcellular resolution through a five-meter-long fiber. Thus we demonstrate that we are capable of measuring the optical redox ratio in a micro-endoscopic configuration.