No description available.

As some companies in the paper industry struggle to shift from commodity grades to value added products, technical challenges and opportunities have grown tremendously. These new products require more stringent manufacturing specifications and improved performance relative to those of lignocellulosic fibers currently being produced. Hence, topochemical and mechanical modifications of pulp fibers have moved to the forefront of many corporate strategies. Researchers are beginning to develop new tools to help better understand the fundamental mechanisms of fiber modifications and how to most efficiently apply them. Two novel approaches are presented. First, a new method to observe single fiber crossings is developed. It was found that refining reduces the stepheight in the fiber crossing for both hardwood and softwood kraft pulps by increasing the tendency of the fibers to collapse, deform, and assume a lens like shape. The effect of pulp type, bleaching, drying, wet pressing, and fiber charge were also investigated. Graphs of stepheight versus freespan were linear through the origin suggesting that the freespan (flexibility) of the crossing fiber is largely unimportant to the formation of fiber crossings. Quite surprisingly, the ratio of stepheight to freespan remained relatively constant no matter the treatment. Only bleaching and the addition of surface charge via CMC had any independent impact on freespan. The data do not fit bending or shear mechanisms that have been developed in the literature suggesting that another mechanism may be responsible for the deformation behavior of single fiber crossings. Also, a method employing fluorescence microscopy and fluorescence resonance energy transfer is used to image the areas of a fiber-fiber interface while they were bonded. Analysis of the FRET signal from fiber crossings indicate that wet pressing increased the FRET occurring between the two dyed fiber surfaces. The results are consistent with the increased amount of interdiffusion expected with higher levels of wet pressing. Two novel techniques are used to investigate fundamental aspects of fiber deformation behavior and fiber-fiber bond formation. As these methods are further refined and utilized they will provide new avenues for researchers to explore and expand the property space of fibers and paper sheets.

NR 20140805

This thesis describes strategies for and examples ofcellulose fiber modification.The ability of an engineered biocatalyst, acellulose-binding module fused to theCandida antarcticalipase B, to catalyze ring-openingpolymerization of e-caprolactone in close proximity tocellulose fiber surfaces was explored. The water content in thesystem was found to regulate the polymer molecular weight,whereas the temperature primarily influenced the reaction rate.The hydrophobicity of the cellulose sample increased as aresult of the presence of surface-deposited polyester. A two-step enzymatic method was also investigated. Here,Candida antarctica lipase B catalyzed the acylation ofxyloglucan oligosaccharides.The modified carbohydrates werethen incorporated into longer xyloglucan molecules through theaction of a xyloglucan endotransglycosylase. The modifiedxyloglucan chains were finally deposited on a cellulosesubstrate. The action ofCandida antarcticalipase B was further investigated inthe copolymerization of e-caprolactone and D,L-lactide.Copolymerizations with different e-caprolactone-to-D,L-lactideratios were carried out. Initially, the polymerization wasslowed by the presence of D,L-lactide. During this stage,D,L-lactide was consumed more rapidly than ε-caprolactoneand the incorporation occurred dimer-wise with regard to thelactic acid units. Morphological studies on wood fibers were conducted using asol-gel mineralization method. The replicas produced werestudied, without additional sample preparation, by electronmicroscopy and nitrogen adsorption. Information concerning thestructure and accessibility of the porous fiber wall wasobtained. Studies of never-dried kraft pulp casts revealedmicro-cavities and cellulose fibrils with mean widths of 4.7(±2) and 3.6 (±1) nm, respectively. Finally, cationic catalysis by simple carboxylic acids wasstudied. L-Lactic acid was shown to catalyze the ring-openingpolymerization of ε-caprolactone in bulk at 120 °C.The reaction was initiated with methylß-D-glucopyranoside, sucrose or raffinose, which resultedin carbohydrate-functionalized polyesters. The regioselectivityof the acylation was well in agreement with the correspondinglipase-catalyzed reaction. The polymerization was alsoinitiated with a hexahydroxy-functional compound, whichresulted in a dendrimer-like star polymer. The L-lactic acidwas readily recycled, which made consecutive reactions usingthe same catalyst possible. Keywords:Candida antarcticalipase B, cationic catalysis,cellulose-binding module, dendrimer, enzymatic polymerization,fiber modification, silica-cast replica, sol-gelmineralization, organocatalysis, xyloglucanendotransglycosylase

<p>This thesis describes strategies for and examples ofcellulose fiber modification.The ability of an engineered biocatalyst, acellulose-binding module fused to the<i>Candida antarctica</i>lipase B, to catalyze ring-openingpolymerization of e-caprolactone in close proximity tocellulose fiber surfaces was explored. The water content in thesystem was found to regulate the polymer molecular weight,whereas the temperature primarily influenced the reaction rate.The hydrophobicity of the cellulose sample increased as aresult of the presence of surface-deposited polyester.</p><p>A two-step enzymatic method was also investigated. Here,Candida antarctica lipase B catalyzed the acylation ofxyloglucan oligosaccharides.The modified carbohydrates werethen incorporated into longer xyloglucan molecules through theaction of a xyloglucan endotransglycosylase. The modifiedxyloglucan chains were finally deposited on a cellulosesubstrate.</p><p>The action of<i>Candida antarctica</i>lipase B was further investigated inthe copolymerization of e-caprolactone and D,L-lactide.Copolymerizations with different e-caprolactone-to-D,L-lactideratios were carried out. Initially, the polymerization wasslowed by the presence of D,L-lactide. During this stage,D,L-lactide was consumed more rapidly than ε-caprolactoneand the incorporation occurred dimer-wise with regard to thelactic acid units.</p><p>Morphological studies on wood fibers were conducted using asol-gel mineralization method. The replicas produced werestudied, without additional sample preparation, by electronmicroscopy and nitrogen adsorption. Information concerning thestructure and accessibility of the porous fiber wall wasobtained. Studies of never-dried kraft pulp casts revealedmicro-cavities and cellulose fibrils with mean widths of 4.7(±2) and 3.6 (±1) nm, respectively.</p><p>Finally, cationic catalysis by simple carboxylic acids wasstudied. L-Lactic acid was shown to catalyze the ring-openingpolymerization of ε-caprolactone in bulk at 120 °C.The reaction was initiated with methylß-D-glucopyranoside, sucrose or raffinose, which resultedin carbohydrate-functionalized polyesters. The regioselectivityof the acylation was well in agreement with the correspondinglipase-catalyzed reaction. The polymerization was alsoinitiated with a hexahydroxy-functional compound, whichresulted in a dendrimer-like star polymer. The L-lactic acidwas readily recycled, which made consecutive reactions usingthe same catalyst possible.</p><p><b>Keywords:</b><i>Candida antarctica</i>lipase B, cationic catalysis,cellulose-binding module, dendrimer, enzymatic polymerization,fiber modification, silica-cast replica, sol-gelmineralization, organocatalysis, xyloglucanendotransglycosylase</p>

Laccase (benzenediol:oxygen oxidoreductase, EC 1.10.3.2), a multi-copper-containing oxidoreductase enzyme, is able to catalyze the oxidation of various low-molecular weight compounds, specifically, phenols and anilines. Due to their high stability, selectivity for phenolic substructures, and mild reaction conditions, laccases are attractive for fine chemical synthesis. In this study, new green domino syntheses were developed by conducting the reaction in an aqueous medium, an environmentally-friendly solvent, and using laccase as a biocatalyst. The first study presents a work on the synthesis of naphthoquinones in the aqueous medium. Herein, laccase was used to oxidize o- and p-benzenediols to generate o- and p-benzoquinones in situ. These quinones then underwent Diels-Alder and oxidation reactions to finally generate napthoquinone products. This reaction system can yield naphthoquinones in up to 80% yield. The next part of this thesis reports the cascade synthesis of benzofuran derivatives from the reaction of catechols and 1,3-dicarbonyl compounds via oxidation-Michael addition in the presence of laccase and Sc(OTf)3/SDS in an aqueous medium. Depending on the substrates, one-pot yields of benzofurans averaged 50-79%. From an environmental concern, this system still produced a hazardous waste from the transition metal catalyst. Therefore, the development of alternative methodologies to replace the lanthanide metal catalyst in this synthesis is a high priority to enhance the overall green chemistry aspect. As a consequence, lipase was used as a catalyst to replace Sc(OTf)3 for the synthesis of benzofuran derivatives. In addition, this catalytic system was also used to catalyze the reaction of anilines and catechol. In the last part of this thesis, laccase was applied to the modification of high-lignin softwood kraft pulp. This modification demonstrates the potential of laccase-facilitated grafting of amino acids to high lignin content pulps to improve their physical properties in paper products which resulted from the increase of carboxylic acid group of the fibers. In this study, a variety of amino acids were examined. Laccase-histidine treatment provided the best yield of acid groups on pulp fiber and was used in the preparation of handsheets for physical strength testing. Laccase-histidine-treated pulp showed an increase in the strength properties of the resulting paper.