Despite the fact that frequency modulation (FM) was firstly applied to radio signaling 80 years ago (1936, by Edwin Howard Armstrong), it has never been deployed in fiber-optic communication systems. In this thesis, a novel frequency modulated fiber-optic communication system with optical discriminator is proposed. The noise configuration and anti-dispersion property of the FM system are investigated through an analytical model that has been derived and validated with numerical simulations. The performance of the proposed FM system is compared with an amplitude modulated (AM) fiber-optic communication system, owing to the fact that the widely used modulation formats, intensity modulation and quadrature amplitude modulation (QAM), can be extracted as a model of the basic AM format. Depending on the property of the filter, two types of frequency discriminators are discussed: the leading edge filter (LEF) and the tail edge filter (TEF). Since the amplified spontaneous emission (ASE) noise is averagely distributed without any frequency dependence, the noise characteristics are not affected by the choice of the frequency discriminator. However, when it comes to the dispersion impairment, the difference between two frequency discriminators is dramatic because the distortion induced by dispersion strongly hinges on the operated frequency. The results show that, with the presence of noise, the proposed FM scheme can lead to one or two orders of magnitude enhancement in the system’s output signal-to-noise ratio (SNR) as compared to that of the conventional AM scheme. Also, with the presence of dispersion, it is proved that the span of the FM system can reliably reach 110km with bit rate up to 10Gbit/s, surpassing the AM system with a maximum signal reach of 70km. A real application, with the presence of both noise and dispersion, demonstrates the overall superiority of the FM system’s performance over that of the AM system. The obtained results suggest a promising future for the FM technique in fiber-optic communication. / Thesis / Master of Applied Science (MASc)

Polarization Mode Dispersion induces polarization dependent propagation. Consequently it generates a multiple imaging of the light pulse carrying the information. Its first order appears as a dual path fading channel of Maxwellian statistics. It results in harmful impairments that prevent the upgrade and installation of high bit-rate systems. The random process PMD exhibits a strong frequency dependence, so that its amelioration requires channel by channel, non-linear, adaptive mitigation. Electronic mitigation appears as a very attractive solution to overcome the limit set by the PMD. Consequently, we considered the implementation of these solutions at the receiver in the electrical domain. We verified that these linear and non-linear equalization techniques can greatly reduce the power penalty due to PMD. Equalization's performance depends highly on the type of systems considered. For the two main types of systems: thermal noise limited systems and systems exhibiting ASE (systems using optical amplifiers), we demonstrated and quantified the induced improvement (measured as power penalty reduction). The most sophisticated technique that we considered (NLC+FDE) handles any kind of first order PMD within a 4 dB margin in the thermal noise limit. This extended to a 11 dB margin in the presence of ASE. This comes from the limitation set by the signal dependence of the noise. In fact, these DSP techniques do a better job at reducing very high penalty. Consequently, for a power and ISI limited link, it may be required to associate to electronic solutions optical compensation in order to reach acceptable performance. On the other hand, for links having large power margin or exhibiting reasonable PMD, electronic techniques appear as an easy, inexpensive and convenient solution. We derived in this work the bounds to NLC performance in the presence of ASE. Therefore, we extended the usual results of the thermal noise limit to the particular case of signal dependent noise. We also made clear that optical systems, because of their noise specificities can not be studied or designed as others links. Notions such as eye opening, SNR and ISI need to be carefully defined and adapted to this case. We have provided in this work PMD dependent power penalty map for known systems. Given the link's statistics and characteristics, one can determine, following our structure, which mitigation techniques allow upgrade. / Master of Science

The purpose of this thesis is to investigate the effect of dispersion on a spectrum-sliced WDM (SS-WDM) system, specifically a system employing a single-mode optical fiber. The system performance is expressed in term of the receiver sensitivity defined as the average number of photon per bit <i>N_p</i>required for a given probability of bit error <i>P_e</i>. The receiver sensitivity is expressed in terms of two normalized parameters: the ratio of the optical bandwidth per channel and the bit rate <i>m</i>=<i>B</i>₀<i>/R_b</i>=<i>B</i>₀<i>T</i>, and the transmission distance normalized by the dispersion distance <i>z/L_D</i>. The former represents the effect of the excess beat noise caused by the signal fluctuation. The latter represents the effect of dispersion. The excess beat noise can be reduced by increasing the value of <i>m</i> (increasing the optical bandwidth<i> B</i>₀ for a given bit rate<i> R_b</i>). However, a large <i>m</i> implies that the degradation due to the dispersion is severe in a system employing a single-mode fiber. Therefore, there should be an optimum <i>m</i> resulting from the two effects. The theoretical results obtained from our analysis have confirmed this prediction. It is also shown that the optimum <i>m</i> (<i>m_opt</i>) decreases with an increase in the normalized distance. This suggests that the dispersion strongly affects the system performance. The increase in the excess beat noise is traded for the decrease in the dispersion effect. Additionally, the maximum transmission distance is relatively short, compared to that in a laser-based system. This suggests that the SS-WDM systems with single-mode fibers are suitable for short-haul systems, such as high-speed local-access network where the operating bit rate is high but the transmission distance is relatively short. / Master of Science

Parallel and distributed computing systems become more and more powerful and hence place increasingly higher demands on the networks that interconnect their processors or processing nodes. Many of the applications running on such systems, especially embedded systems applications, have real-time requirements and, with increasing application demands, high-performance networks are the hearts of these systems. Fiber-optic networks are good candidates for use in such systems in the future. This thesis contributes to the relatively unexplored area of fiber-optic networks for parallel and distributed real-time computer systems and  suggests and evaluates several fiber-optic networks and protocols. Two different technologies are used in the networks, WDM (Wavelength Division Multiplexing) and fiber-ribbon point-to-point links. WDM offers multiple channels, each with a capacity of several Gbit/s. A WDM star network in which protocols and services are efficiently integrated to support different kinds of real-time demands, especially hard ones, has been developed. The star-of-stars topology can be chosen to offer better network scalability. The WDM star architecture is attractive but its future success depends on components becoming more commercially mature. Fiber-ribbon links, offering instead an aggregated bandwidth of several Gbit/s, have already reached the market with a promising price/performance ratio. This has motivated the development and investigation of two new ring networks based on fiber-ribbon links. The networks take advantage of spatial bandwidth reuse, which can greatly enhance performance in applications with a significant amount of nearest downstream neighbor communication. One of the ring networks is control channel based and not only has support for real-time services like the WDM star network but also low level support for, e.g., group communication. The approach has been to develop network protocols with support for dynamic real-time services, out of time-deterministic static TDMA systems. The focus has been on functionality more than pure performance figures, mostly on real-time features but also on other types of functionality for parallel and distributed systems. Worst-case analyses, some simulations, and case studies are reported for the networks. The focus has been on embedded supercomputer applications, where each node itself can be a parallel computer, and it is shown that the networks are well suited for use in the radar signal processing systems studied. Other application examples in which these kinds of networks are valuable are distributed multimedia systems, satellite imaging and other image processing applications. / Technical report / School of Electrical and Computer Engineering, Chalmers University of Technology, Göteborg, Sweden, 0282-5406 ; 379

<p>Future parallel computer systems for embedded real-time applications,where each node in itself can be a parallel computer, are predicted to havevery high bandwidth demands on the interconnection network. Otherimportant properties are time-deterministic latency and guarantees to meetdeadlines. In this thesis, a fiber-optic passive optical star network with amedium access protocol for packet switched communication in distributedreal-time systems is proposed. By using WDM (Wavelength DivisionMultiplexing), multiple channels, each with a capacity of several Gb/s, areobtained.</p><p>A number of protocols for WDM star networks have recently been proposed.However, the area of real-time protocols for these networks is quiteunexplored. The protocol proposed in this thesis is based on TDMA (TimeDivision Multiple Access) and uses a new distributed slot-allocationalgorithm with real-time properties. Services for both guarantee-seekingmessages and best-effort messages are supported for single destination,multicast, and broadcast transmission. Slot reserving can be used toincrease the time-deterministic bandwidth, while still having an efficientbandwidth utilization due to a simple slot release method.</p><p>By connecting several clusters of the proposed WDM star network by abackbone star, thus forming a star-of-stars network, we get a modular andscalable high-bandwidth network. The deterministic properties of thenetwork are theoretically analyzed for both intra-cluster and inter-clustercommunication, and computer simulations of intra-cluster communicationare reported. Also, an overview of high-performance fiber-opticcommunication systems is presented.</p>

<p>High-performance embedded systems communicating heterogeneous traffic with high bandwidth and strict timing requirements are in need of more efficient communication solutions. This thesis proposes two multi-wavelength passive optical networks able to meet these demands. The networks are based upon a single-hop star topology with an Arrayed Waveguide Grating (AWG) placed in the centre. The intended application areas for the two networks are short range embedded communication systems like System Area Networks (SANs) and router architectures with electronic queuing. The AWG’s attractive property of spatial wavelength reuse, as well as the combination of fixed-tuned and tuneable transceivers in the end nodes, enables simultaneous control and data traffic transmission. This, in turn, makes it possible to support heterogeneous traffic with both hard and soft real-time constraints.</p><p>Additionally, two Medium Access Control (MAC) protocols, one for each network solution, are developed. Traffic scheduling is centrally controlled by a node, the protocol processor, residing together with the AWG in a hub. All nodes use Earliest Deadline First (EDF) scheduling and communicate with the protocol processor through physical control channels. A case study, including simulations, in the field of Radar Signal Processing (RSP) and simulations using periodic real-time traffic are conducted for the two application areas respectively, showing very good results. Further, a deterministic real-time analysis is conducted to provide throughput and delay guarantees for hard real-time traffic and an increase in guaranteed traffic is achieved through an analysis of existing traffic dependencies in a multichannel network. Simulation results incorporating the traffic dependency analysis indicate a considerable increase in the possible guaranteed throughput of hard real-time traffic.</p>

High-performance embedded systems communicating heterogeneous traffic with high bandwidth and strict timing requirements are in need of more efficient communication solutions. This thesis proposes two multi-wavelength passive optical networks able to meet these demands. The networks are based upon a single-hop star topology with an Arrayed Waveguide Grating (AWG) placed in the centre. The intended application areas for the two networks are short range embedded communication systems like System Area Networks (SANs) and router architectures with electronic queuing. The AWG’s attractive property of spatial wavelength reuse, as well as the combination of fixed-tuned and tuneable transceivers in the end nodes, enables simultaneous control and data traffic transmission. This, in turn, makes it possible to support heterogeneous traffic with both hard and soft real-time constraints. Additionally, two Medium Access Control (MAC) protocols, one for each network solution, are developed. Traffic scheduling is centrally controlled by a node, the protocol processor, residing together with the AWG in a hub. All nodes use Earliest Deadline First (EDF) scheduling and communicate with the protocol processor through physical control channels. A case study, including simulations, in the field of Radar Signal Processing (RSP) and simulations using periodic real-time traffic are conducted for the two application areas respectively, showing very good results. Further, a deterministic real-time analysis is conducted to provide throughput and delay guarantees for hard real-time traffic and an increase in guaranteed traffic is achieved through an analysis of existing traffic dependencies in a multichannel network. Simulation results incorporating the traffic dependency analysis indicate a considerable increase in the possible guaranteed throughput of hard real-time traffic.

Future parallel computer systems for embedded real-time applications,where each node in itself can be a parallel computer, are predicted to havevery high bandwidth demands on the interconnection network. Otherimportant properties are time-deterministic latency and guarantees to meetdeadlines. In this thesis, a fiber-optic passive optical star network with amedium access protocol for packet switched communication in distributedreal-time systems is proposed. By using WDM (Wavelength DivisionMultiplexing), multiple channels, each with a capacity of several Gb/s, areobtained. A number of protocols for WDM star networks have recently been proposed.However, the area of real-time protocols for these networks is quiteunexplored. The protocol proposed in this thesis is based on TDMA (TimeDivision Multiple Access) and uses a new distributed slot-allocationalgorithm with real-time properties. Services for both guarantee-seekingmessages and best-effort messages are supported for single destination,multicast, and broadcast transmission. Slot reserving can be used toincrease the time-deterministic bandwidth, while still having an efficientbandwidth utilization due to a simple slot release method. By connecting several clusters of the proposed WDM star network by abackbone star, thus forming a star-of-stars network, we get a modular andscalable high-bandwidth network. The deterministic properties of thenetwork are theoretically analyzed for both intra-cluster and inter-clustercommunication, and computer simulations of intra-cluster communicationare reported. Also, an overview of high-performance fiber-opticcommunication systems is presented.

This dissertation investigates the design and performance issues of a recently demonstrated technique, termed as spectrum-slicing, for implementing wavelength-division-multiplexing (WDM) in optical fiber systems. Conventional WDM systems employ laser diodes operating at discrete wavelengths as carriers for the different data channels that are to be multiplexed. Spectrum-slicing provides an attractive low-cost alternative to the use of multiple coherent lasers for such WDM applications by utilizing spectral slices of a broadband noise source for the different data channels. The principal broadband noise source considered is the amplified spontaneous emission (ASE) noise from an optical amplifier. Each slice of the spectrum is actually a burst of noise that is modulated individually for a high capacity WDM system. The stochastic nature of the broadband source gives rise to excess intensity noise which results in a power penalty at the receiver. One way to minimize this penalty, as proposed and analyzed for the first time in this work, is to use an optical preamplifier receiver. It is shown that when an optical preamplifier receiver is used, there exists an optimum filter bandwidth which optimizes the detection sensitivity (minimizes the average number of photons/bit) for a given error probability. Moreover the evaluated detection sensitivity represents an order of magnitude ( > 10 dB) improvement over conventional PIN receiver-based detection techniques for such spectrum-sliced communication systems. The optimum is a consequence of signal energy fluctuations dominating at low values of the signal time bandwidth product (m), and the preamplifier ASE noise dominating at high values of m. Operation at the optimum bandwidth renders the channel error probability to be a strong function of the optical bandwidth, thus providing motivation for the use of forward error correction coding (FEC). System capacity (for BER = ) is shown to be 23 Gb/s without coding, and 75 Gb/s with a (255,239) Reed Solomon code. The effect of non-rectangular spectra on receiver sensitivity is investigated for both OOK and FSK transmission, assuming the system (de)multiplexer filters to be N'th order Butterworth bandpass. Although narrower filters are recommended for improving power budget, it is shown that system penalty due to filter shape may be kept < 1 dB by employing filters with N > 2. Moreover spectrum-sliced FSK systems using optical preamplifier receivers are shown, for the first time, to perform better in a peak optical power limited environment. Performance-optimized spectrum-sliced WDM systems have potential use in both local loop and long-distance fiber communication systems which require low-cost WDM equipment for high data rate applications. / Ph. D.

In this thesis, the optical communication systems for millimeter-scale sensing and communication devises known as "Smart Dust" are described and analyzed. A smart dust element is a self-contained sensing and communication system that can be combined into roughly a cubic-millimeter mote to perform integrated, massively distributed sensor networks. The suitable passive optical and fiber-optic communication systems will be selected for the further performance design and analysis based on the requirements for implementing these systems. Based on the communication link designs of the free-space passive optical and fiber-optic communication systems, the simulations for link performance will be performed. / Master of Science