Note:

The use of a modal domain fiber optic sensor for vibration control of a flexible cantilevered beam is experimentally demonstrated. The sensor utilizes mode-mode interference in a two mode elliptical core fiber. The sensor covers a major portion of the beam, and produces a measurement based on the strain distribution in the beam. A distributed-effect model is developed for the fiber optic sensor, and verified through both static and dynamic tests. This model is incorporated into a active control system employing dynamic output feedback. The control system is shown to add damping to the low order modes of the beam. Numerical simulations are presented which concur with the experimental responses, in both open and closed loop tests. / Master of Science

Fiber optic temperature sensors are excellent candidates for monitoring the temperature along the stator windings of a large electric power generator. Unlike thermocouple thermometers, they are immune to the effects of strong magnetic fields which are present in all power generators. Several different point and line sensors have been evaluated in their ability to resolve temperature and temperature distribution (respectively), as well as their compatibility with the generator environment. The sensor must function inside the generator for long periods of time (up to 25 years) without benefit of recalibration. This constraint has required us to devise methods by which the sensor may remain permanently calibrated. In almost all cases, it is necessary to measure a natural characteristic of a device which is temperature sensitive in order to achieve permanent calibration. This will enable the device to function despite the varying characteristics of the source and detector equipment.

No description available.

A major limitation in tissue engineering is the lack of nondestructive methods to assess the development of tissue scaffolds undergoing preconditioning in bioreactors. Due to significant optical scattering in most scaffolding materials, current microscope-based imaging methods cannot "see" through thick and optically opaque tissue constructs. To address this deficiency, we developed a scanning fiber imaging method capable of nondestructive imaging of fluorescently labeled cells through a thick and optically opaque vascular scaffold, contained in a bioreactor. This imaging modality is based on local excitation of fluorescent cells, acquisition of fluorescence through the scaffold, and fluorescence mapping based on the position of the excitation light. To evaluate the capability and accuracy of the imaging system, human endothelial cells, stably expressing green fluorescent protein (GFP), were imaged through a fibrous scaffold. Without sacrificing the scaffolds, we nondestructively visualized the distribution of GFP-labeled endothelial cells on the luminal surface through a ~500 µm thick tubular scaffold at cell-level resolutions and distinct localization. These results were similar to control images obtained using an optical microscope with direct line-of-sight access. Through a detailed quantitative analysis, we demonstrated that this method achieved a resolution of the order of 20-30 µm, with 10% or less deviation from standard optical microscopy. Furthermore, we demonstrated that the penetration depth of the imaging method exceeded that of confocal laser scanning microscopy by more than a factor of 2. Our imaging method also possesses a working distance (up to 8 cm) much longer than that of a standard confocal microscopy system, which can significantly facilitate bioreactor integration. This method will enable nondestructive monitoring of endothelial cells seeded on the lumen of a tissue-engineered vascular graft during preconditioning in vitro, as well as for other tissue-engineered constructs in the future. / Ph. D.

In this dissertation, various analytical models to characterize fiber nonlinearities have been applied, and the ranges of validity of the models are determined by comparing with numerical results. First, the perturbation approach is used to solve the nonlinear Schrödinger equation, and its range of validity is determined by comparing to the split-step Fourier method. In addition, it is shown mathematically that the perturbation approach is equivalent to the Volterra series approach. Secondly, root-mean-square (RMS) widths both in the time domain and in the frequency domain are modeled. It is shown that there exists an optimal input pulse width to minimize output pulse width based on the derived RMS models, and the functional form of the minimum output pulse width is derived. The response of a fiber to a sinusoidally modulated input which models an alternating bit sequence is studied to see its utility in measuring system performance in the presence of the fiber nonlinearities. In a single channel system, the sinusoidal response shows a strong correlation with eye-opening penalty in the normal dispersion region over a wide range of parameters, but over a more limited range in the anomalous dispersion region. The cross-phase modulation (CPM) penalty in a multi-channel system is also studied using the sinusoidally modulated input signal. The derived expression shows good agreement with numerical results in conventional fiber systems over a wide range of channel spacing, ∆<i>f</i>, and in dispersion-shifted fiber systems when ∆<i>f</i> > 100GHz. It is also shown that the effect of fiber nonlinearities may be characterized with stochastic input signals using noise-loading analysis. In a dense wavelength division multiplexed (DWDM) system where channels are spaced very closely, the broadened spectrum due to various nonlinear effects like SPM (self-phase modulation), CPM, and FWM (four-wave mixing) is in practice indistinguishable. In such a system, the noise-loading analysis could be useful in assessing the effects of broadened spectrum due to fiber nonlinearities on system performance. Finally, it is shown numerically how fiber nonlinearities can be utilized to improve system performance of a spectrum-sliced WDM system. The major limiting factors of utilizing fiber nonlinearities are also discussed. / Ph. D.

Wavelength division multiplexing two channels on one fiber is one approach that enables us to make use of the extremely large bandwidth of optical fibers. We start with an analysis of optical fibers, sources, detectors, filters and wavelength division ,multiplexers. Then, using the knowledge from the experimental data, we design a 20 km bidirectional WDM datalink. The design is backed up with theory and measurements. Fiber to the home is one of many applications that makes use of such a design. / Master of Science

A method of modifying a uÌ ber optic fused biconical tapered coupler to produce a relatively temperature insensitive Michelson interferometer is presented. The modification was accomplished by cleaving the coupler after the minimum taper region and polishing, perpendicular to the endface, to a point just short of the interaction region. This allows one of the two fiber cores, which are within micrometers of each other with their claddings fused together, to be coated at its endface with a reflecting material. This reflecting core serves as the reference arm, while the other core serves as the sensing arm. Variations in the method of fabrication of the sensor are described. Because of the close proximity and short length of the reference and sensing arms, the interferometer is temperature insensitive. The miniaturized Michelson interferometer is characterized and its limitations are discussed. A surface acoustic wave detection scheme is successfully demonstrated. Results of a magnetic field sensor using the miniaturized Michelson interferometer and a magnetostrictive material are presented. / Master of Science

This paper investigates the application of single, low-moded, fiber optic sensors to the detection of structural vibration. Several laboratory vibration systems which demonstrate a range of component frequencies and dynamic range are analyzed in an effort to characterize the sensor's behavior. We compare frequency spectra of the sensor output with calculated frequency components of the structures to determine if the sensor is responding to the various structural harmonics. Specifically, we wish to demonstrate the dynamic range and frequency response of the sensing technique. Experimental results and observations are preceded by a brief review of sensor mechanisms in optical fibers and presentation of a theory describing the operation of the modal domain sensor. / M.S.

KOPIO is an experiment designed to search for the CP-symmetry-violating reaction K_L⁰ → π⁰νν̅. Measurement of the branching ratio of this reaction, depending on the accuracy of the measurement, could be the most precise measurement of the CP-violation parameters of the Standard Model to date. The K_L⁰ → π⁰νν̅ reaction is exceedingly rare, with an expected branching ratio of (2.6 ± 1.2) ·10⁻¹¹ . The rareness of this reaction means two things: 1) that we need prodigious numbers of kaons, and 2) that a multitude of "improper" decays will have to be screened out by means of a veto detector system, part of which is being designed here at Virginia Tech. This detector must be able to detect the passage of daughters of the undesired decay reactions (charged particles and gammas). It must be operational inside a magnetic field, and must have signal timing fast enough to accommodate the rate at which these decays occur. A detector consisting of alternating layers of scintillator and lead, with wavelength-shifting fibers embedded in the scintillator, provides the characteristics sought after. This paper presents methodology used in design and construction of this detector, as well as results of signal property tests, using both cosmic rays and gammas as event triggers. Also included is a discussion on transporting the detector signal outside of the magnetic field so it can be read by photomultiplier tubes resting outside of the sweeping magnet. / Master of Science