Le lin (Linum usitatissimum L.) est une plante aux intérêts multiples. Sa tige est source de fibres, depuis longtemps utilisées dans le domaine du textile. Ce potentiel économique justifie la sélection variétale du lin en vue de développer des variétés plus riches en fibres et offrant une meilleure résistance aux maladies et la verse. Plus récemment, les fibres de lin ont vu leur utilisation s’étendre au renfort de matériaux composites grâce à leurs étonnantes propriétés mécaniques et morphologiques. Ces propriétés singulières s’expliquent grâce à leur développement et à leurs fonctions dans la tige. Ainsi, ce travail de thèse propose une caractérisation multi-échelle du lin, de la tige jusqu’à la paroi cellulaire de la fibre, afin de comprendre le lien entre les paramètres de croissance de la plante, le développement des fibres et leurs propriétés. L’architecture générale d’une tige de lin est explorée, ainsi que les conséquences de la sélection variétale sur cette structure et sur les propriétés des fibres. De plus, l’évolution des propriétés mécaniques des parois de fibres au cours de la croissance de la plante et de la phase de rouissage est caractérisée. En complément, la contribution des fibres à la rigidité en flexion d’une tige est mise en évidence, de même que leur rôle dans la résistance des tiges au flambage. Enfin, l’influence des conditions de culture sur les architectures des tiges et propriétés des fibres est étudiée par le biais de cultures en serre ou encore en simulant un phénomène de verse. Cette approche originale met en valeur les caractéristiques remarquables du lin qui en font un modèle de bioinspiration pour les matériaux composites de demain / Flax (Linum usitatissimum L.) is a plant with multiple interests. Its stem provides fibers, which have long been used in the textile industry. The economic potential of flax explains its varietal selection, aiming at developing varieties exhibiting higher fiber yields as well as greater resistance toward diseases and lodging. More recently, flax fibers have been dedicated to the reinforcement of composite materials due to their outstanding mechanical and morphological properties. These singular characteristics are related to fiber development and functions within the stem. Thus, the present work offers a multi-scale characterization of flax, from the stem to the fiber cell wall, in order to understand the link between plant growth parameters, the development of its fibers and their properties. The general architecture of a flax stem is investigated, as well as the impact of the varietal selection on this structure and on fiber performances. Moreover, changes in mechanical properties of fiber cell walls over plant growth and retting process are characterized. In addition, the fiber contribution to the stem stiffness is highlighted, as well as the fiber role in the resistance of the stem to buckling. The influence of culture conditions on stem architecture and fiber features is also studied through cultivations in greenhouse and by simulating a lodging event. This original approach emphasizes the uncommon characteristics of flax, which make this plant an instructive model toward future bioinspired composite materials.

The material properties of fibre networks and fibre reinforced composites are strongly influenced by fibre-fibre interactions. Stress transfer between load bearing elements in such materials is often dictated by the nature of the fibre-fibre interface. Inter-fibre bonding is solely responsible for internal cohesion in paper, because all stresses transferred between fibres operate through fibre-fibre bonds. . The future development of cellulosic fibre materials will require an improved understanding of the fibre-fibre interface. Fluorescence resonance energy transfer (FRET) was proposed as a new tool for the study of fibre interfaces. A protocol for covalent linkage of fluorophores to natural and regenerated cellulosic fibres was developed and the absorptive and emissive properties of these dyes were characterized. The fluorescent response of these dyed fibres in paper sheets was studied using steady-state fluorescence spectroscopy. Fluorescence micrographs of fibre crossings on glass slides were analyzed using the FRETN correction algorithm. Energy transfer from coumarin dyed fibres to fluorescein dyed fibres at the interface was observed. The FRETN surfaces for spruce and viscose rayon fibre crossings were distinctly different. The FRET microscopy method was able to detect statistically significant differences in spruce fibre interface development when fibre fraction and wet pressing were varied. The coalescence of natural cellulosic fibre interfaces during drying was also observed with the technique. Polysaccharide films were employed as model systems for the natural and regenerated cellulose fibre interfaces. It was found that pressing cellulose films did not result in significantly increased FRETN either due to resistance to deformation or the inability to participate in interdiffusion. Conversely, xylan films demonstrated a drastic increase in the FRETN signal with increased wet pressing. These results support the previously observed differences between regenerated cellulose fibres and natural wood fibres. The results of the FRETN analysis of the polysaccharide film model systems suggest that lower molecular weight amorphous carbohydrates are likely to be significant contributors to fibre interface development.

In a fiber spinning process molten polymer is extruded into a fiber. The resulting fiber known as as-spun fiber is relatively weak and shows a large plastic central zone in its constitutive behavior. As a result the fiber deforms substantially without a significant change in load thus making it unsuitable for stress bearing applications. The range of plastic deformation is related to the natural draw ratio. In order to improve the mechanical properties of as spun fibers, fiber spinning is followed by a fiber draw process. With multi stage draw the as-spun fiber is drawn beyond the plastic region in various drawing zones which produces greater orientation of the polymer chains in the axial direction of the fiber thus enhancing mechanical strength characteristics of the fiber. The multistage draw process consists of several rollers each rotating at a speed greater than the one prior to it. The objective of this work is to develop a first approximation to model fiber draw in the multistage drawing process, with and without a draw pin. As the first step the slippage of fibers on rollers was analysed by including centrifugal acceleration and acceleration due to stretching. The draw in a free span is also modelled. Several representative draw processes were examined. It was found draw pin localizes the draw significantly although the resulting mechanical unloading complicates the analysis. Draw in the free span is impossible for isothermal draw processes, and anisothermal draw induces thermal unloading in the system. A comprehensive analysis of various draw processes will be examined.