No description available.

Abstract The thesis clearly demonstrates that photon migration measurements allow characterization of pulp and paper properties, especially the fines and filler content of pulp, and the basis weight, thickness and porosity of paper. Pulp and paper are materials with a worldwide significance. Their properties strongly depend on the manufacturing process used. For efficient process control, the employed monitoring and measuring has to be fast. Therefore it is worthwhile to try to develop new approaches and techniques for such measurements. Recent advancements in optics offer new possibilities for such development. If two samples have different optical properties their photon migration distributions are different. The measurement of a photon migration distribution allows some features between two optically slightly dissimilar samples to be distinguished. Some simple measurements, which only yielded the photons' average time of flight, were made with an oscilloscope and a time-of-flight lidar. More precise measurements yielding photon pathway distribution or some selected characteristics like light pulse rise time, broadening, or fall time were measured with a streak camera. Two methods to assess photon path length distribution were introduced: particle determination with simulation, and streak camera with deconvolution. The basic properties for pulp are consistency and fines content and for paper the basic properties are thickness, basis weight and porosity. The influence on photon migration caused by changes in these basic properties was determined. As pulp and paper are rarely very basic, an additional property was demonstrated for both materials. For pulp it was the content of filler talc, and for paper it was the use of beaten pulp as a raw material. These additional properties were also distinguishable.

L’odontologie conservatrice a connu une véritable révolution avec l’avènement de la dentisterie adhésive et le développement des résines composites associé au collage aux tissus dentaires. L’apparition il y a 20 ans des résines composites fluides a élargi encore les possibilités thérapeutiques des praticiens. La mise sur le marché d’un grand nombre de résines composites qui diffèrent par leur nature matricielle et par le type, la taille et la proportion des charges incorporées associée au manque d’informations des fabricants sur les compositions exactes de leurs produits empêchent les praticiens de réellement connaitre les caractéristiques des matériaux qu’ils utilisent. L’hyper-caractérisation in vitro desdits matériaux est une voie importante pour avancer dans la compréhension de leur comportement. Afin de juger de l’impact de la variation du taux de charges dans le comportement mécanique et physico-chimique des résines composites fluides, nous avons étudié deux groupes de matériaux : un premier groupe constitué de résines composites fluides expérimentales à matrice commune et à taux de charges variable et un deuxième groupe composé de résines composites fluides disponibles dans le commerce. Pour chacun de ces matériaux après la détermination du taux de charges par la méthode de la calcination, l’évaluation des caractéristiques rhéologiques (viscosité complexe et module de conservation), la mesure de la micro-dureté (micro-dureté Vickers), la contraction volumétrique de prise selon la méthode de la déflexion d’une lame de verre, l’analyse thermo-mécanique dynamique en flexion (module de conservation, module de perte, facteur d’amortissement) ainsi que les capacités d’absorption d’eau et de solubilisation (détermination par différentiel de gravimétrie après immersion dans différents milieux) sont autant de facteurs potentiellement influencés par ledit taux de charges qui ont été étudiés. Si le taux de charges devrait clairement faire partie des critères de choix du praticien tant il apparait influant sur les plans mécaniques et physico-chimiques, il apparait qu’un taux de charges élevé ne représente pas une garantie suffisante pour répondre de façon optimale au cahier des charges du matériau d’obturation idéal. L’emploi de résines composites fluides déformulées à taux de charges variable permet d’évaluer le rôle de la phase dispersée, pour autant, l’étude en parallèle de matériaux commerciaux met en lumière l’influence de la nature matricielle et des différentes entités monomériques entrant dans la structure polymère. / Conservative dentistry has undergone a genuine revolution, with the advent of adhesive dentistry and the development of resin composites combined with dental bonding. The emergence of flowable resin composites 20 years ago further expanded the treatment options open to dental practitioners. The appearance on the market of a large number of resin composites that differ in terms of their matrix type, along with the size and the proportion of the fillers incorporated, combined with a lack of information from manufacturers concerning the exact compositions of their products, means that practitioners do not really know all the characteristics of the materials they are using. In vitro hypercharacterization of these materials is an important approach to help us gain a better understanding of their properties. In order to assess the impact of variation of filler contents on the mechanical and physicochemical properties of flowable resin composites, we studied two groups of materials: a first group, composed of experimental flowable resin composites with the same matrix and a variable filler content, and a second group, composed of commercially available flowable resin composites. For each of these materials, after determination of the filler content using the calcination method, assessment of their rheological properties (complex viscosity and storage modulus), measurement of microhardness (Vickers microhardness), volumetric setting shrinkage using the glass slide deflection technique, dynamic thermo-mechanical analysis in flexure (storage modulus, loss modulus, damping factor), along with the water absorption and dissolution capacities (determination by thermal gravimetry differential following immersion in different media) are all factors potentially influenced by the said filler contents studied. While the filler content should clearly be one of the decision-making criteria used by practitioners given the influence it seems to have on both mechanical and physicochemical properties, it nonetheless appears that a high filler content is not, in itself, a sufficient guarantee that the material meets the optimum specifications for an ideal filling material. The use of deformulated flowable composite resins with a variable filler content makes it possible to assess the role of the dispersed phase. However, a parallel study of commercially available materials highlights the influence of the matrix type and the various monomeric entities included in the polymer structure.

Aim of this diploma thesis is to choose new pattern wax for Fimes a.s. foundry. New wax should substitute old not fully satisfactory pattern wax which caused problems in technological process resulting in increased number of rejects. New pattern wax should eliminate current problems and help foundry with producing large, thin-walled, high-quality castings. Numbers of pattern waxes supplied by world’s leading wax manufacturers were subjected to laboratory tests and pilot study. This diploma thesis is part of project Alfa TA01010766: „Research and development of production technology large, thin and high quality castings of aluminium alloys “