Global ETD Search

71	Stavebně technologický projekt obchodního centra v Aši / Construction technology project of shopping centre in Aš Petřík, Michael January 2019 (has links) This thesis deals technological project shopping centre in Aš. Technological phase solving realization floor finish in central structure. Thesis contains engineering report, studies report main structure, design of main machine and mechanisms, timelines, site equipment, controlling and testing plan, budget plan, plan of realization road infrastructure.
72	Návrh zařízení pro analýzu povrchových vlastností materiálů / Design of measurement unit for analysis of surface materials properties Kratochvíl, Robert January 2011 (has links) The thesis deals with the application of laser beams for examination of material properties. The properties being examined are quality of surface finish and transmissivity of materials in the optical portion of the electromagnetic spectrum. A measuring device containing laser diodes as a source of laser beam and photodiodes for evaluation of examined phenomena serves for examination of both properties. Conversion of the signal to digital quantity and its further processing take place in a microcontroller. The data is then sent via a serial bus and a converter to a computer, where it may be saved in a user program and where the user can work with them later. The thesis contains results of reflectivity measurement of a set of metal samples with different surface finish. Transmissivity measurement was applied on a set of optical filters.
73	An Analysis of Microstructure and Corrosion Resistance in Underwater Friction Stir Welded 304L Stainless Steel Clark, Tad Dee 30 June 2005 (has links) (PDF) An effective procedure and parameter window was developed for underwater friction stir welding (UWFSW) 304L stainless steel with a PCBN tool. UWFSW produced statistically significant: increases in yield strengths, decreases in percent elongation. The ultimate tensile strength was found to be significantly higher at certain parameters. Although sigma was identified in the UWFSWs, a significant reduction of sigma was found in UWFSWs compared to ambient FSWs. The degree of sensitization in UWFSWs was evaluated using double loop EPR testing and oxalic acid electro-etched metallography. Results were compared to base metal, ambient FSW, and arc welds. Upper and lower sensitization localization bands were identified in the UWFSWs. Although higher sensitization levels were present in UWFSWs compared to the arc weld, ambient FSW, and heat treated base metals, the UWFSWs were found less susceptible to corrosion than arc welds due to the subsurface location of the sensitization bands. A SCC analysis of UWFSWs relative to base metal and arc weldments was performed. U-bends were exposed to two 3.5% NaCl cyclic immersion experiments at 21 °C and 63 °C for 1000 hours each. A tertiary test was conducted in a 25% NaCl boiling solution. The UWFSW u-bends were no more susceptible to SCC than base metal in the cyclic immersion tests. In the boiling NaCl test, the SCC of the UWFSWs showed significant improvement over the SCC of arc welds. Arc u-bends cracked entirely within the weld bead and HAZ, while SCC in the UWFSWs showed no cracking localization. friction stir weld FSW underwater friction stir weld UWFSW stainless steel stir zone 304L austenite austenitic procedure process window welding parameters corrosion intergranular stress corrosion cracking SCC u-bend sensitization PCBN double loop EPR current ratio potentiostat electrochemical reactivation sampling area quantification tensile strength ductility elongation statistical significance microstructure optical microscopy oxidation surface finish base metal sigma Murakami oxalic acid electro-etch arc weld comparison cyclic immersion test boiling NaCl test subsurface location residual stress improvement superiority ASTM standard HAZ heat affected zone Mechanical Engineering

Page generated in 6.207 seconds