Deformation of bridges that are induced by thermal loads can be accommodated by expansion joints and bearings. Integral Abutment Bridges have gained acceptance as a way to mitigate potential damage from thermal movements, eliminating the poor performance and maintenance costs associated with expansion joints and bearings. However, integral abutments significantly change the structural response of the bridges. Several researches including real time field monitoring and finite element analyses have been conducted on straight and skewed integral abutment bridges in order to improve an understanding on field performance of them. Some state transportation agencies have also developed guidelines for the design of straight and skewed integral abutment bridges in recent years. In contrast, very little information is available on the performance of curved integral abutment bridges. A detailed finite element model of Stockbridge Bridge, VT is used to evaluate the behavior of curved integral abutment bridges under self-weight and thermal loading. In addition, a parametric study is carried out to investigate the effects of bridge curvature and abutment backfill soil type. Finally, six additional finite element models are created to compare the responses of jointed (conventional) bridges and integral abutment bridges. Results reported include abutment displacements, rotations, moments in abutment piles, earth pressures and bridge superstructure moments. Suggestions for improvement of analytical modeling and recommendations for design of curved integral abutment bridges are made.

No description available.

Self-assembled lipid tubules are particularly attractive for inorganic synthesis and drug delivery because they have hollow cylindrical shapes and relatively rigid mechanical properties. In this thesis work, we have synthesized lipid tubules of 1,2-bis(tricosa-10,12-dinoyl)-sn-glycero-3-phosphocholine (DC8,9PC) by self-assembly and polymerization in solutions. We demonstrate for the first time that both uniform and modulated molecular tilt orderings exist in the tubule walls, which have been predicted by current theories, and therefore provide valuable supporting evidences for self-assembly mechanisms of chiral molecules. Two novel methods are developed for studying the axial and radial deformations of DC8,9PC lipid tubules. Mechanical properties of DC8,9PC tubules are systematically studied in terms of persistence length, bending rigidity, strain energy, axial and radial elastic moduli, and critical force for collapse. Mechanisms of recovery and surface stiffening are discussed. Due to the high aspect ratio of lipid tubules, the hierarchical assembly of lipid tubules into ordered arrays and desired architectures is critical in developing their applications. Two efficient methods for fabricating ordered arrays of lipid tubules on solid substrates have been developed. Ordered arrays of hybrid silica-lipid tubes are synthesized by tubule array-templated sol-gel reactions. Ordered arrays of optical anisotropic fibers with tunable shapes and refractive indexes are fabricated. This thesis work provides a paradigm for molecularly engineered structures.

High hydrodynamic pressure (HDP) treatment is a novel non-thermal technology that improves tenderness in foods by subjecting foods to underwater shock waves. In this study non-destructive and destructive testing methods, along with two mathematical models were explored to predict biomechanical behavior of beef loins subjected to HDP-treament. The first study involved utilizing ultrasound and imaging techniques to predict textural changes in beef loins subjected to HDP-treatment using Warner-Braztler shear force (WBS) scores and texture profile analysis (TPA) features for correlation. Ultrasound velocity correlated very poorly with the WBS scores and TPA features, whereas the imaging features correlated better with higher r-values. The effect of HDP-treatment variables on WBS and TPA features indicated that amount of charge had no significant effects when compared to location of sample and container size during treatment. Two mathematical models were used to simulate deformational behavior in beef loins. The first study used a rheological based modeling of protein gel as a preliminary study. Results from the first modeling study indicated no viscous interactions in the model and complete deformation failure at pressures exceeding 50 kPa, which was contrary to the real-life process conditions which use pressures in the order of MPa. The second modeling study used a finite element method approach to model elastic behavior. Shock wave was modeled as a non-linear and linear propagating wave. The non-linear model indicated no deformation response, whereas the linear model indicated realistic deformation response assuming transverse isotropy of the model beef loin. The last study correlated small- and large-strain measurements using stress relaxation and elastic coefficients of the stiffness matrix as small-strain measures and results of the study indicated very high correlation between elastic coefficients c11, c22, and c44 with TPA cohesiveness (r > 0.9), and springiness (r > 0.85). Overall results of this study indicated a need for further research in estimating mechanical properties of beef loins in order to understand the dynamics of HDP-treatment process better. / Ph. D.

Over recent decades, the public tendency toward using the structural composite lumber (SCL), a common composite of wood made of wood strands or veneers glued and compressed together, as structural members (especially the main load bearing members such as beams and columns) has risen considerably. In contrast to the fast-paced market growth of these products, development is slow. The experimental development is gradual and time-consuming and the computational development is even slower. The objective of this project is to introduce appropriate numerical models for limit state analysis of a certain type of SCL material called PSL. Parallel strand lumber (PSL), has mesostructures characterized by the presence of voids that renders the mesostructure highly heterogeneous. In addition to material phase aberrations such as grain angle variations and defects, void heterogeneities play an important role in determining the failure modes and strength of PSL. In this study, virtual void structures were defined to form part of the input to finite element analysis of PSL for the purpose of investigating the sensitivity of strength to the void structure. Assuming the wood phase to be homogeneous and orthotropic, the following 2D and 3D characteristics of voids were investigated: volume fraction, volume, alignment and moments of inertia of voids, as well as second moment properties, lineal path function and chord length functions of the two phase mesostructure. In addition, a method was developed to generate virtual voids in order to simulate PSL and investigate the possible effects of the void distribution on material strength. An experimental program along with a statistical survey was conducted to quantify the mentioned characteristics of the voids in two 133 mm * 133 mm * 610 mm 2.0 E Eastern Species PSL billets. As expected, most of the voids lie on the longitudinal direction of the specimen and have approximately an ellipsoidal shape. Based on this shape data, the characteristics of the ellipsoids which best t the voids were calculated. Using the statistical data of the fitted ellipsoids, a random field of virtual ellipsoid shaped voids to simulate the mesostructure of PSL was generated. In this study, the simulation of PSL material is based on two simplifying assumptions: 1) The wood phase is continuum, homogeneous and orthotropic. While in reality, the wood phase consists of glued wood strands that are heterogeneous due to their mechanical variability and only roughly orthotropic on a macro scale as a result of the varying fiber angle; 2) Voids are the mere source of uncertainty. The linear elastic analysis of carefully defined (in mesostructural aspect) PSL models can be the first step of mechanical study of the material. The effective modulus of elasticity of material in presence of voids and the distribution of conventional, principal and effective stresses considering the effect of volume fraction and shape of the voids are the target of this preliminary study. Linear elastic uniaxial analyses showed good mechanical consistency between the models including actual void shapes and the models including ellipsoidal void representations. Also, they showed that the stress mutliaxiality at the tip of the voids is negligible. The study of mechanics of PSL is incomplete unless the question of material anisotropy is taken into consideration. PSL is brittle in tension and ductile in compression. The material heterogeneity increases the complexity of the problem by affecting the stress distribution in the member. A detailed nonlinear approach has been proposed in order to investigate the mechanical behavior of PSL structural members under different uniaxial loading scenarios. This approach introduces proper constitutive models for the wood phase along with good void generation techniques. In other words, this approach suggests what models should be used for the continuum-assumed wood phase to simulate its brittle behavior in tension and ductile behavior in compression; and moreover, tests the applicability and accuracy of ellipsoidal void representation. The models are calibrated using the results of experiments on PSL material. Because of the brittle behavior, all wood products show significant mechanical dependency to the member's size under tensile loading. Once good constitutive model and mesostructural simulation is found for tensile loading, it is easy to make and analyze PSL models with different sizes and investigate the effect of size on mechanical behavior. The simulation results have been compared to the available results of a previously done experimental study.

This thesis aims to investigate the manufacturability of nickel-based superalloys, IN625 and IN718, using the laser powder bed fusion (LPBF) process. The study provides a better understanding of the process-structure-property of nickel-based superalloys, their fatigue life, and subsequent post-processing. First, the process-structure-property was investigated by selecting a wide range of process parameters to print coupons for IN625 and IN718. Next, a subset of process parameters was defined that would produce high relative density (>99%), low surface roughness (~2 μm), and a low tensile RS. Second, a multi-scale finite element model was constructed to predict the temperature gradients, cooling rates, and their effect on RS. At constant energy density, RS is affected by scan speed, laser power, and hatch spacing, respectively. Third, the optimum set of parameters was used to manufacture and test as-built and shot-peened samples to investigate the fatigue life without costly heat treatment processes. It was found that shot peening resulted in a fatigue life comparable to wrought heat-treated unnotched specimen. Additionally, IN625 had a better fatigue life compared to IN718 due to higher dislocations density as well as the absence of γ´ and γ´´ in IN718 due to the rapid cooling in LPBF. Finally, the effect of post-processing on dimensional accuracy and surface integrity was investigated. A new approach using low-frequency vibration-assisted drilling (VAD) proved feasible by enhancing the as-built hole accuracy while inducing compressive in-depth RS compared to laser peening, which only affects the RS. These favorable findings contributed to the scientific knowledge of LPBF of nickel-based superalloys by determining the process parameters optimum window and reducing the post-processes to obtain a high fatigue life, a better dimensional accuracy, and improved surface integrity. / Thesis / Doctor of Philosophy (PhD)

No description available.

No description available.

No description available.

No description available.