No description available.

No description available.

Deep knowledge of combustion phenomena is of great scientific and technological interest. In fact, better design of combustion equipments (furnaces, boilers, engines, etc) can contribute both in the energy efficiency and in the reduction of pollutant formation. One of the limitations to design combustion equipments, or even predict simple flames, is the resolution of the mathematical formulation. Analytical solutions are not feasible, and recently numerical techniques have received enormous interest. Even though the ever-increasing computational capacity, the numerical resolution requires large computational resources due to the inherent complexity of the phenomenon (viz. multidimensional flames, finite rate kinetics, radiation in participating media, turbulence, etc). Thus, development of capable mathematical models reducing the complexity and the stiffness as well as efficient numerical techniques are of great interest.The main contribution of the thesis is the analysis and application of the laminar flamelet concept to the numerical simulation of both laminar and turbulent non-premixed flames. Assuming a one-dimensional behavior of combustion phenomena in the normal direction to the flame front, and considering an appropriate coordinates transformation, flamelet approaches reduce the complexity of the problem.The numerical methodology employed is based on the finite volume technique and a parallel multiblock algorithm is used obtaining an excellent parallel efficiency. A post-processing verification tool is applied to assess the quality of the numerical solutions.Before dealing with flamelet approaches, a co-flow partially premixed methane/air laminar flame is studied for different levels of partial premixing. A comprehensive study is performed considering different mathematical formulations based on the full resolution of the governing equations and their validation against experimental data from the literature. Special attention is paid to the prediction of pollutant formation.After the full resolution of the governing equations, the mathematical formulation of the flamelet equations and a deep study of the hypothesis assumed are presented. The non-premixed methane/air laminar flame is considered to apply the flamelet modelling approach, comparing the results with the simulations obtained with the full resolution of the governing equations. Steady flamelets show a proper performance to predict the main flame features when differential diffusion and radiation are neglected, while unsteady flamelets are more suitable to account for these effects as well as pollutant formation. Assumptions of the flamelet equations, the scalar dissipation rate modelling, and the evaluation of the Lagrangian flamelet time for unsteady flamelets are specially analysed. For the numerical simulation of turbulent flames, the mathematical formulation based on mass-weighted time-averaging techniques, using RANS EVM two-equation models is considered. The laminar flamelet concept with a presumed PDF is taken into account. An extended Eddy Dissipation Concept model is also applied for comparison purposes. A piloted non-premixed methane/air turbulent flame is studied comparing the numerical results with experimental data from the literature. A clear improvement in the prediction of slow processes is shown when the transient term in the flamelet equations is retained. Radiation is a key aspect to properly define the thermal field and, consequently, species such as nitrogen oxides. Finally, the consideration of the round-jet anomaly is of significant importance to estimate the flame front position.In conclusion, flamelet modelling simulations are revealed to be an accurate approach for the numerical simulation of laminar and turbulent non-premixed flames. Detailed chemistry can be taken into account and the stiffness of the chemistry term is solved in a pre-processing task. Pollutant formation can be predicted considering unsteady flamelets.

L'optimisation des systèmes d'allumage est un paramètre critique pour la définition des foyers de combustion industriels. Des simulations aux grandes échelles (ou LES pour Large-Eddy Simulation) d'un brûleur de type bluff-body non pré-mélangé ont été menées afin de comprendre l'influence de la position de la bougie sur la probabilité d'allumage. La prise en compte de la combustion est basée sur une méthode de tabulation de la chimie détaillée (PCM-FPI pour Presumed Conditional Moments - Flame Prolongation of ILDM). Les résultats de ces simulations ont été confrontés des résultats expérimentaux disponibles dans la littérature. Dans un premier temps, les mesures de vitesse et du champ de richesse à froid sont comparées aux résultats de la simulation pour évaluer les capacités de prédiction en terme de structure de l'écoulement et de mélange turbulent. Un suivi temporel des vitesses et de la fraction de mélange est réalisé à différents points pour déterminer les fonctions de densité de probabilité (ou PDF)des variables caractéristiques de l'écoulement, à partir des champs résolus en LES. Les PDFs ainsi obtenues servent l'analyse des phénomènes d'allumages réussis ou déficients rencontrés expérimentalement. Des simulations d'allumage forcé ont été effectuées pour analyser les différents scénarios de développement de la flamme. Les corrélations entre les valeurs locales (fraction de mélange, vitesse) autour de la position d'allumage et les chances de succès de développement du noyau de gaz brûlés sont alors discutées. Enfin, une extension de la méthode PCM-FPI avec prise en compte des effets d'étirement est développée à l'aide d'une analyse asymptotique, puis confrontée aux résultats de mesures expérimentales. / The optimization of the ignition process is a crucial issue in the design of many combustion systems. Large eddy simulation (LES) of a conical shaped bluff-body turbulent non-premixed burner has been performed to study the impact of spark location on ignition success. The chemistry part of the simulation is done using tabulated detailed chemistry approach. This burner was experimentally investigated by Ahmed et al at Cambridge (UK). The present work focuses on the case without swirl for which detailed measurements are available. First, cold fkow measurements of velocities and mixture fraction are compared with their LES counterparts, to assess the prediction capabilities of simulations in terms of flow and turbulent mixing. Time history of velocities and mixture fraction are recorded at selected spots, to probe the resolved probability density function (pdf) of flow variables, in an attempt to reproduce, from the knowledge of LES resolved instantaneous flow conditions, the experimentally observed reasons of success or failure of spark ignition. A flammability map is also constructed from the resolved mixture fraction pdf and compared with its experimental counterpart. LES of forced ignition is then performed using flamelet fully detailed tabulated chemistry combined with presumed pdfs (PCM-FPI). Various scenarios of flame kernel development are analyzed and correlated with typical flow conditions observed in this burner. The correlations between velocities and mixture fraction values at the sparking time and the success or failure of ignition are then further discussed and analysed. The rate of flame development during successful or unsuccessful ignition events are analysed and compared against experimental observations. Finally, from asymptotic flame analysis, a novel approach has been proposed to include flame straining effects in the PCM-FPI method developped at CORIA-CNRS. The new model overcomes the problem associated with classical PCM-FPI closure to model kernel quenching due to intense local turbulence. Computations are done including the flame straining effects and the effect brought by the new model on kernel development is analysed in detail.

[ES] El alto impacto del sector transporte respecto a las emisiones globales de CO2 y su efecto en el cambio climático ha llevado a que éste transite hacia tecnologías más eficientes y medioambientalmente sostenibles. Sin embargo, el ritmo de transformación es lento en relación a lo que se necesita para frenar el calentamiento global existente. En este sentido, en los últimos tiempos los caminos hacia la transformación se han diversificado; el concepto de "defossilization" ha surgido como alternativa a la descarbonización, ya que destaca la posibilidad de incluir una mayor cantidad de combustibles sintéticos y renovables, con los cuales se pueden obtener resultados igualmente efectivos. Dentro de estos, destacan los combustibles Polioximetileno dimetil éter (OMEn), su carácter oxigenado y no poseer enlaces carbono-carbono, los hace prometedores respecto a la formación de hollín. Además, presentan grandes similitudes y compatibilidades con el diésel convencional, lo cual posibilita el uso de la flota de vehículos con motores de combustión interna existente a nivel mundial, acelerando así la transición y siendo una alternativa con alcance global. La presente tesis tiene como objetivo llevar a cabo un estudio fundamental sobre el proceso de combustión y la estructura de la llama de chorros tipo Diésel cuando se utilizan combustibles tipo OMEn. Para la consecución de dicho objetivo, la metodología planteada es eminentemente computacional, encontrando aquí las mayores brechas en la literatura. Se lleva a cabo un estudio de la cinética química y el efecto de la difusión en los combustibles estudiados mediante configuraciones canónicas, como reactores homogéneos y flamelets de contraflujo. Posteriormente, se estudia detalladamente el proceso de combustión y la estructura de la llama mediante el uso extensivo de Dinámica de fluidos computacional (CFD, en inglés), con modelos de turbulencia RANS y LES, en conjunto con un modelo de combustión avanzado basado en el concepto de flamelets, denominado UFPV. Todos los casos estudiados están definidos siguiendo las directrices de la Engine Combustion Network (ECN), los cuales representan chorros inyectados en ambientes quiescentes con toberas monoorificio. Particularmente, se evalúan los Sprays A y D, y el impacto de variar la temperatura ambiente. Como conclusión general, se puede afirmar que estos modelos CFD predicen correctamente el desarrollo de la combustión bajo las condiciones analizadas, y que estos combustibles son capaces de desarrollar diferentes estructuras de llama altamente dependientes de las condiciones de contorno impuestas. / [CA] L'alt impacte del sector del transport respecte a les emissions globals de CO2 i el seu efecte en el canvi climàtic ha portat a que aquest transite cap a tecnologies més eficients i mediambientalment sostenibles. No obstant això, el ritme de transformació és lent en relació amb el que es necessita per frenar l'escalfament global existent. En aquest sentit, en els últims temps els camins cap a la transformació s'han diversificat; el concepte de "defossilització" ha sorgit com a alternativa a la descarbonització, ja que destaca la possibilitat d'incloure una major quantitat de combustibles sintètics i renovables, amb els quals es poden obtenir resultats igualment efectius. Dins d'aquests, destaquen els combustibles tipus polioximetilen dimetil èters (OMEn), el seu caràcter oxigenat i al no posseir enllaços carbó-carbó, els fa prometedors respecte a la formació de sutge. A més, presenten grans semblances i compatibilitats amb el dièsel convencional, la qual cosa possibilita l'ús de la flota de vehicles amb motors de combustió interna existent a nivell mundial, accelerant així la transició i essent una alternativa amb abast global. La present tesi té com a objectiu dur a terme un estudi basic sobre el procés de combustió i l'estructura de la flama de dolls tipus Dièsel quan s'utilitzen combustibles tipus OMEn. Per a la consecució d'aquest objectiu, la metodologia plantejada és eminentment computacional, trobant ací les majors mancances en la literatura. Es realitza un estudi de la cinètica química i l'efecte de la difusió en els combustibles estudiats mitjançant configuracions canòniques, com ara reactors homogenis i flamelets de contraflux. Posteriorment, s'estudia detalladament el procés de combustió i l'estructura de la flama mitjançant l'ús extensiu de dinàmica de fluids computacional (CFD, en anglés), amb models de turbulència RANS i LES, conjuntament amb un model de combustió avançat basat en el concepte de flamelets, anomenat UFPV. Tots els casos estudiats estan definits seguint les directrius de l'Engine Combustion Network (ECN, en anglés), els quals representen dolls injectats en ambients quiescents amb toveres mono-orifici. Particularment, s'avaluen els Sprays A i D, i l'impacte de variar la temperatura ambient. Com a conclusió general, es pot afirmar que aquests models CFD prediuen correctament el desenvolupament de la combustió sota les condicions analitzades, i que aquests combustibles són capaços de desenvolupar diferents estructures de flama altament dependents de les condicions de contorn imposades. / [EN] The significant impact of the transportation sector on global CO2 emissions and its effect on climate change has led to a shift towards more efficient and environmentally sustainable technologies. However, the pace of this transformation is slow relative to what is needed to mitigate existing global warming. In this regard, pathways toward transformation have diversified recently, with the concept of defossilization emerging as an alternative to decarbonization. Defossilization emphasizes the possibility of incorporating a greater variety of synthetic and renewable fuels, which can yield equally effective results. Among these alternatives, Polyoxymethylene dimethyl ether ($OMEn$) fuels stand out due to their oxygenated character and absence of carbon-carbon bonds, making them promising in reducing soot formation. Furthermore, their similarities and compatibilities with conventional diesel enable the utilization of the existing global fleet of internal combustion engine vehicles, thus potentially accelerating the transition on a global scale. This thesis aims to conduct a fundamental study on the combustion process and flame structure of Diesel-like sprays when OMEn-type fuels are utilized. To achieve this objective, the proposed methodology is eminently computational, addressing significant gaps in the existing literature. A study of chemical kinetics and diffusion effects in the fuels under investigation uses canonical configurations such as homogeneous reactors and counterflow flamelets. Subsequently, the combustion process and flame structure are examined in detail through extensive Computational fluid dynamics (CFD) simulations, employing RANS and LES turbulence models in conjunction with an advanced combustion model based on the flamelet concept, UFPV. All studied cases are defined according to the Engine Combustion Network (ECN) guidelines, representing sprays injected into quiescent environments with single-hole nozzles. Specifically, Spray A and D are evaluated, along with the impact of varying ambient temperatures. In conclusion, it can be affirmed that the CFD models accurately predict combustion development under the analysed conditions, and these fuels can develop different flame structures highly dependent on the imposed boundary conditions. / The respondent wishes to acknowledge the financial support received through a grant from Vicerrectorado de Investigación of Universitat Politècnica de València with reference FPI UPV SUBP2 (PAID-01-20) / De León Ceriani, D. (2024). Evaluation by Detailed CFD Modelling of the Effect of Renewable Fuels on the Flame Structure under Compression Ignition Engine Conditions [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/207008