O presente trabalho investiga o comportamento da chapa de latão C268, com 0,50 mm de espessura, quando exposto ao processo de Estampagem Incremental de Chapas de Metal (Incremental Sheet Metal Forming -ISMF). Especificamente para a pesquisa, foram utilizadas as modalidades de Estampagem Incremental com Ponto Simples (Single Point Incremental Forming- SPIF) e Estampagem Incremental de Múltiplos Passes (Multi Pass Single Point Incremental Forming- MSPIF). Os experimentos foram baseados em uma geometria de tronco de pirâmide de base quadrada com 100 mm de lado e 45 mm de profundidade. Para as estratégias de estampagem foi atribuído, a estampagem helicoidal. Como resultado principal, foi verificado o ângulo de parede máximo atingido por cada processo de estampagem incremental. Adicionalmente, ensaios de tração, análise de deformações e de rugosidade da chapa de latão foram realizados. Todos os seus resultados estão detalhados na investigação. Para os parâmetros adotados nestes experimentos, o ângulo de parede obtido por SPIF foi maior do que pelo estudo proposto por MSPIF. / The present study investigates the performance of the brass plate C-268 with 0.50 mm thickness, when exposed to Incremental Sheet Metal Forming (ISMF). Specifically for research, it was used the modalities Single Point Incremental Forming (SPIF) and Multi Pass Single Point Incremental Forming (MSPIF). The experiments were based on a truncated pyramid geometry with square base 100 mm side and 45 mm depth. For forming strategies has been assigned, the helical forming. As the main outcome, it was found the maximum wall angle achieved by each process of incremental printing. In addition, tensile tests, analysis of deformation and roughness of the brass sheet were performed. All results are detailed in the investigation. For the parameters used in these experiments, the wall angle obtained by SPIF is greater than the study proposed by MSPIF.

O presente trabalho investiga o comportamento da chapa de latão C268, com 0,50 mm de espessura, quando exposto ao processo de Estampagem Incremental de Chapas de Metal (Incremental Sheet Metal Forming -ISMF). Especificamente para a pesquisa, foram utilizadas as modalidades de Estampagem Incremental com Ponto Simples (Single Point Incremental Forming- SPIF) e Estampagem Incremental de Múltiplos Passes (Multi Pass Single Point Incremental Forming- MSPIF). Os experimentos foram baseados em uma geometria de tronco de pirâmide de base quadrada com 100 mm de lado e 45 mm de profundidade. Para as estratégias de estampagem foi atribuído, a estampagem helicoidal. Como resultado principal, foi verificado o ângulo de parede máximo atingido por cada processo de estampagem incremental. Adicionalmente, ensaios de tração, análise de deformações e de rugosidade da chapa de latão foram realizados. Todos os seus resultados estão detalhados na investigação. Para os parâmetros adotados nestes experimentos, o ângulo de parede obtido por SPIF foi maior do que pelo estudo proposto por MSPIF. / The present study investigates the performance of the brass plate C-268 with 0.50 mm thickness, when exposed to Incremental Sheet Metal Forming (ISMF). Specifically for research, it was used the modalities Single Point Incremental Forming (SPIF) and Multi Pass Single Point Incremental Forming (MSPIF). The experiments were based on a truncated pyramid geometry with square base 100 mm side and 45 mm depth. For forming strategies has been assigned, the helical forming. As the main outcome, it was found the maximum wall angle achieved by each process of incremental printing. In addition, tensile tests, analysis of deformation and roughness of the brass sheet were performed. All results are detailed in the investigation. For the parameters used in these experiments, the wall angle obtained by SPIF is greater than the study proposed by MSPIF.

The main aim of this master's thesis is to propose a technological preparation of the wiping plate production. Elaboration is divided into four chapters. The first chapter describes forming tool (function and construction). In the second chapter is technologies overview, which are used for the wiping plate production. The most important is the third chapter, because it deals with the main output, and the actual proposal of technological preparation of the production. In the fourth chapter, production is reviewed economically.

The thesis is focused on the proposal design of the technology of the production of the cover plate of the lock, which together with other parts forms part of the fifth door of the passenger car. The cover is made of 2 mm metal sheet and includes a number of bends, embosses, cuts and trimmed holes. Based on production requirements and a series size of 1,200,000 pieces over 3 years, the production using a progressive composite tool was chosen. The part will be made in eleven steps composing of cutting, stamping, bending and edging. Micro-alloyed structural steel S355MC was chosen as the most suitable material. The part will be produced on the press KSTU 5000-30-7G RKM from the company ANDRITZ Metals and the price of the product is 14,33 CZK.

This master’s thesis is focused on the design of the technology to produce a part of the TV bracket. The part is made of steel sheet with a thickness of 2.5 mm. The structural steel S235JR was chosen as the most suitable material with following powder coating. From the possible variants, the production by progressive forming tool was chosen with respect to production requirements and a series size of 30 000 pieces by year. The part will be made in seven steps in designed tool and the total required force is 1013 kN. The production will take place on a mechanical press PCK12 from Bliss-Bret with a maximum force of 1250 kN. The final price of the part is 39.4 Kč.

The Diploma Thesis deals with the technology of manufacturing the titan exhaust for a two-stroke engine. It includes a description of the manufacturing procedure. It analyzes in detail the forming issue of sheet-metal parts in order to eliminate the spring-back effect, and it finds possible solutions to this problem.

In this master's thesis the proposal of the production technology of component – solar collector anchor element from steel 1.0038 (11 375) quality, 5 mm thickness is solved. For the manufacturing of the assigned part the shearing and bending technology and a progressive forming tool including a suitable forming machine of 8,000 kN rated power is selected. The proposed method of production is laid down by a technical-economic evaluation with respect to the production series of 150,000 units per year. The solar collector anchor element serves to hold the frame for the solar vacuum tube collector. In the scope of this master's thesis, an assessment of the current production method, including the selection of a suitable semi-finished product for production, was also carried out and their optimization was proposed.

The diploma thesis is focused on the description and the verification of a relatively young creep age forming method. This method is based on a relaxation of stress and a creep of material, which occur by forming a part in the clamping tool during the artificial precipitation heat treatment at elevated temperature. After removing from the tool, the spring back and the residual stresses in the part are smaller compared to the conventional forming methods. This is mainly reflected in the increased fatigue resistance of the structure. The creep aging is only applicable to the precipitation heat treatable alloys. This thesis is focused on aluminium alloys, which are typical for the aerospace industry. The first part of the thesis describes principles of technology, its use in the aviation and material processes in the aluminium precipitation heat treatable alloys during the creep age forming. In the second part, there is a methodology of the verification of technology on samples made of the aluminium alloys ČSN EN AL-P 7075 and ČSN 424203 (approximate equivalent of ČSN EN AL-P 2024). Furthermore, a forming tool is designed, and experiments are performed according to the proposed methodology. At the end of the thesis, the experiments are evaluated and changes in the spring back of the samples are compared for three different methods of forming: the conventional cold clamping forming, the creep age forming and the creep age forming with an overaging.

The project elaborated design of production technology of light holder for agricultural tractors. Light holder is made of deep-drawn steel DC 01. For a production series of 30000 pieces, the production using a progressive die. The part will be manufactured in five steps. For production of the component was chosen hydraulic forming press CTH 250 of nominal force 2500kN from the company ŽĎAS. Total production costs of the component were calculated at 79 CZK.

The Master’s thesis written in the frame of studies branch Manufacturing Technology (2303T002) is submitting design of technology production of sheet metal cover. The part is made of sheet metal 1,5 mm thick. The material for the part is HC260LA (ZStE260). There are no special mechanical or dimensional accuracy demands for the part. According to production run (5 000 pcs. per year for 5 years), design complexity and machine accessories of submitter was proposed manufacturing the part by drawing technology with finish laser cutting. Forming tool is designed according with press Erfurt PKZZ 315. Thesis includes economical evaluation of elaborated technology with other variants of production.