Spelling suggestions: "subject:"formwork"" "subject:"formworks""
141 |
Polyfunkční objekt / Multifunctional buildingŠuba, Pavel January 2015 (has links)
This thesis solves the design of multifunctional building. The building is situated on the outskirts of Mikulov in the cadastral area Mikulov in Moravia. Plot number is the 5087th. Multifunctional house will be used for housing of 26 people and providing commercial services. There are considered groceries and hairdressing salon. The building is designed without a basement, four-storey, with a gabled roof. It is based on the footings of plain concrete. The structural system consists of wall formwork system from VELOX.
|
142 |
Bioplynová stanice-stavebně technologický projekt / The biogas station - Construction Technology ProjectFatura, Josef January 2015 (has links)
The subject of my thesis is the technological phase biogas plant. I focused in detail on the buildings SO01 - Hala income and treatment of raw materials and SO02 - Operating building a cogeneration unit. The concreting, formwork and reinforcement substructure object SO01 I developed technological prescription. Furthermore, my work includes a technical report on the structural and technological project, construction situation, time and financial planning, study, implementation of major technological stages, construction machinery, crane assessment, project site equipment, plan for securing material resources for SO01, inspection and test plan, plan OSH and itemized budget.
|
143 |
Kanalizace a ČOV ve Veverské Bítýšce - stavebně technologický projekt / Sewerage and wastewater treatment plants - construction technology projectProkop, Ondřej January 2016 (has links)
Master´s thesis deals with construction technology project of Sewerage and wastewater treatment plants. The old building objects will be demolished and there will be built new objects on the same place as before. The target of the reconstruction is reducing the amount of energy and increase technological and technology level of wastewater treatment. One of the part of the reconstruction is build new filling station and the sanitation of pipelines on the other side of the river.
|
144 |
Stavebně technologický projekt Domova důchodců Brno - Tuřany / Construction technology project of Retirement Home Brno - TuřanyRapant, Radek January 2016 (has links)
The thesis is elaborated on the basis of project of the retirement home Brno – Tuřany. The thesis is focused on building technology solutions of construction of the retirement home Brno – Tuřany. The main part of the thesis deals with realization of rough construction DCI, especially with detailed description and draft solution for making the ceilings and elliptical reinforced concrete staircase (tube). Apart from the impressive architectonic draft solution of main staircase of the building, it will be interesting to deal with progress of the whole construction that is divided into three dilatational parts.
|
145 |
Stavebně technologický projekt části lékařské fakulty / Architectural and technological project of the Faculty of MedicineMalečík, Patrik January 2017 (has links)
In my master's thesis I deal with constructive technological project of medical faculty of Charles Univerisity. The aim is to solve the structure in terms of financial, time and technology. Constructive technological project of my thesis contains site equipment, time and financial schedule, design of mechanization, technological prescription, inspection and test plan, health and safety, etc.
|
146 |
Návrh nosné železobetonové konstrukce rodinného domu / Design of a load-bearing reinforced concrete structure of a family houseBartoška, Ondřej January 2022 (has links)
Diploma thesis is focused on the construction of a two-storey, partly basement, family reinforced concrete house. The ARCHICAD 22 program was used to design this object, the SCIA 21.0 program was used for the model and the subsequent calculation of internal forces. In addition to the static calculation, the work includes reinforcement drawings and drawings of the shape of selected monolithic parts made in AutoCAD 2021. Reinforced concrete elements are assessed in accordance with ČSN EN 1992-1-1.
|
147 |
Dům s pečovatelskou službou ve Zlíně / Nursing home, ZlínKaulincová, Hana January 2022 (has links)
The subject of the thesis is the development of project documentation for the construction of a nursing home in Zlín for clients who are unable to take care of themselves and need full day care. The nursing home is designed to stand alone in sloping terrain. The slope is used and the entrance to the first above-ground level is at the level of the modified terrain from Broučkova street and the entrance to the basement is also from the modified terrain. The building is designed with one underground floor and five upper floors. The circumferential and internal supporting masonry is designed from ceramic cut cinder blocks on the upper floors. Lost shuttering is used on the perimeter and vertical support structures, in the basement. Elevator shafts, ceiling structures and staircases are designed from monolithic reinforced concrete structures. The roof is an extensive green roof. The object is based on reinforced concrete strips. The object is insulated with the ETICS.
|
148 |
Kontrola provádění železobetonových konstrukcí / Inspection of the implementation of reinforced concrete structuresJuráň, David January 2022 (has links)
This diploma thesis deals with the control of the implementation of reinforced concrete structures. The theoretical part deals with the issues of this theme. There are presented individual work processes of the implementation of reinforced concrete structures, accesses of valid standards, used diagnostic methods and also inspection and test plans for cast-in-place reinforced concrete structure. The practical part is divided into three chapters. The first chapter applies with the most frequent defects in new reinforced concrete structures and two remaining chapters with the inspection of newly built structures for which arose misgivings about the quality of execution.
|
149 |
Obvodní oddělení policie ČR v Brně - Bohunicích, příprava realizace stavby / District Police Department of the Czech Republic in Brno-Bohunice, Preparation for ConstructionDubecký, Tomáš January 2022 (has links)
The aim of the diploma thesis is to prepare the construction called the District Police Department of the Czech Republic in Brno, Bohunice. The diploma thesis contains a technical report on the construction technology project, which deals with architectural and construction design solutions, coordination situation and transport routes, where critical points are assessed time and financial plan of construction, where all construction objects are described with their time and financial schedule, a study of the implementation of the main construction stages, which addresses the various stages of construction. The diploma thesis contains a technical report, item budget, plan for the establishment and liquidation of buildings and drawings of construction site equipment for each stage, design of the main construction machinery for the construction. A detailed time plan of the main building, a plan of its supply of materials for the rough construction was prepared for the given construction. Furthermore, the work contains a technological regulation for a reinforced concrete monolithic staircase, which is related to the control and test plan for a reinforced concrete monolithic staircase. The next assignment deals with the item budget of the main building for the rough construction, the drawing of the formwork for the reinforced concrete monolithic staircase and the economic assessment and evaluation of construction cranes.
|
150 |
Príprava realizácie polyfunkčných domov v Bratislave / Preparation for the implementation of the multifunctional buildings in BratislavaJaníček, Peter January 2022 (has links)
This diploma thesis deals with the preparation of the implementation of multifunctional buildings in Bratislava. These are three detached multi-storey apartment buildings connected by a joint basement. The diploma thesis includes a technical report to the construction technological project, a study of the implementation of main technological phases, solving of broader relations of transport routes with the design of supply routes, a time schedule and a financial plan of the object, a detailed time plan for the rough substructure and rough superstructure, a building site equipment project, a machine assembly design and its assessment, a technological regulation for monolithic structures, a control plan and test plan for monolithic structures, a specification of the time period of the removal of the formwork of monolithic structures, an occupational safety and health plan and selected points of the LEED certification. The thesis also includes a plan for securing resources for the rough structure with added schedules of workers, machines and building materials, a cost estimation budget of selected technological processes, a noise study, and a financial analysis of the expected investment profit.
|
Page generated in 0.0546 seconds