Frequency selective surfaces (FSS) were originally developed for electromagnetic filtering applications at microwave frequencies. Electron-beam lithography has enabled the extension of FSS to infrared frequencies; however, these techniques create sample sizes that are seldom appropriate for real world applications due to the size and rigidity of the substrate. A new method of fabricating large area conformal infrared FSS is introduced, which involves releasing miniature FSS arrays from a substrate for implementation in a coating. A selective etching process is proposed and executed to create FSS particles from crossed-dipole and square-loop FSS arrays. When the fill-factor of the particles in the measurement area is accounted for, the spectral properties of the FSS flakes are similar to the full array from which they were created. As a step toward scalability of the process, a square-patch design is presented and formed into FSS flakes with geometry within the capability of ultraviolet optical lithography. Square-loop infrared FSS designs are investigated both in quasi-infinite arrays and in truncated sub-arrays. First, scattering-scanning near-field optical microscopy (s-SNOM) is introduced as a characterization method for square-loop arrays, and the near-field amplitude and phase results are discussed in terms of the resonant behavior observed in far-field measurements. Since the creation of FSS particles toward a large area coating inherently truncates the arrays, array truncation effects are investigated for square-loop arrays both in the near- and far-field. As an extension of the truncation study, small geometric changes in the design of square-loop arrays are introduced as a method to tune the resonant far-field wavelength back to that of the quasi-infinite arrays.

Meanderline structures are widely used as engineered birefringent materials for waveplates and retarders at radiofrequencies, and have been previously demonstrated at frequencies up to 90 GHz in the millimeter-wave band. In this dissertation, we present results related to the modeling, fabrication, and experimental characterization of meanderlines across the range from 30 to 100 THz, in the long-wave and mid-wave infrared bands. Specific issues addressed in these new designs include spectral dispersion and angular dependence of the retardance, as well as axial ratio and throughput. The impact resulting from the infrared properties of the metals and dielectrics is explicitly included throughout. Several novel applications are identified, including integrated circular polarizers, reflective waveplates, and large-area polarization tags.

No description available.

The focus of this thesis is peak-to-average power ratio (PAPR) reduction in cooperative wireless networks which exploit orthogonal frequency division multiplexing in transmission. To reduce the PAPR clipping is employed at the source node. The first contribution focuses upon an amplify-and-forward (AF) type network with four relay nodes which exploits distributed closed loop extended orthogonal space frequency block coding to improve end-to-end performance. Oversampling and filtering are used at the source node to reduce out-of-band interference and the iterative amplitude reconstruction decoding technique is used at the destination node to mitigate in-band distortion which is introduced by the clipping process. In addition, by exploiting quantized group feedback and phase rotation at two of the relay nodes, the system achieves full cooperative diversity in addition to array gain. The second contribution area is outage probability analysis in the context of multi-relay selection in a cooperative AF network with frequency selective fading channels. The gains of time domain multi-path fading channels with L paths are modeled with an Erlang distribution. General closed form expressions for the lower and upper bounds of outage probability are derived for arbitrary channel length L as a function of end-to-end signal to noise ratio. This analysis is then extended for the case when single relay selection from an arbitrary number of relay nodes M is performed. The spatial and temporal cooperative diversity gain is then analysed. In addition, exact form of outage probability for multi-path channel length L = 2 and selecting the best single relay from an arbitrary number of relay nodes M is obtained. Moreover, selecting a pair of relays when L = 2 or 3 is additionally analysed. Finally, the third contribution context is outage probability analysis of a cooperative AF network with single and two relay pair selection from M available relay nodes together with clipping at the source node, which is explicitly modelled. MATLAB and Maple software based simulations are employed throughout the thesis to support the analytical results and assess the performance of algorithms and methods.

International Telemetering Conference Proceedings / October 22-25, 2001 / Riviera Hotel and Convention Center, Las Vegas, Nevada / Design, performance Test and Evaluation (T&E) of a novel smart diversity receiver, based on Feher Diversity (FD) patents over multipath, fast dynamic frequency selective fading channels is presented. A hardware simulator for construction of a frequency selective fading channel has been implemented in laboratory to resemble a telemetry aeronautical channel model, namely the two-path channel model. As an illustrative example, the block error rate (BLER) of a 1 Mb/s rate IRIG 106-00 and CCSDS standardized Feher’s patented quadrature phase shift keying (FQPSK) [1][2] with and without diversity in multipath frequency selective fading channels has been tested and evaluated. The experimental results clearly indicate significant performance improvement with the proposed diversity technique even in cases of severely distorted channels.

International Telemetering Conference Proceedings / October 23-26, 2000 / Town & Country Hotel and Conference Center, San Diego, California / In this paper, we propose applying the spatio-temporal signal processing and OFDM techniques to a multiple-antenna system in order to achieve high data rate and high performance transmission capability. In order to perform real time processing for this system, we also propose a complexity reduced QR beamforming algorithm. The performance of the proposed system has been investigated for a two-ray frequency-selective fading model by extensive computer simulations. These results show that significant benefits can be realized in terms of lower bit error rate and higher data transmission rate.

International Telemetering Conference Proceedings / October 23-26, 2000 / Town & Country Hotel and Conference Center, San Diego, California / Three Quadrature Phase Shift Keying (QPSK) mapped COFDM systems demonstrating a continuum of complexity levels are simulated over an evolving three ray model of the multipath fading channel with parameters interpolated from actual channel sounding experiments. The first COFDM system uses coherent QPSK and convolutional coding with interleaving in frequency, channel equalization and soft decision decoding; the second uses convolutional coding with interleaving in frequency, Differential Phase Shift Keying (DPSK) and soft decision decoding; the third system uses a quaternary BCH code with DPSK mapping and Error and Erasure Decoding (EED). All three systems are shown to be able to provide reliable data communication during frequency selective fade events. Simulations demonstrate QPSK mapped COFDM with reasonable complexity performs well in a multipath frequency selective fading environment under parameters typically encountered in aeronautical telemetry.

A fixed terrestrial wireless system such as the Microwave Multi-channel Distribution Service (MMDS) can be used as the ``last mile' to provide a high speed Internet connection from a base station to a home in a rural or suburban residential area. Such a broadband wireless system works very well under line-of-sight transmission. It works quite well even if the line-of-sight is obstructed with a large number of trees. However, when trees obstruct the line-of-sight, under conditions of wind, the user may experience loss of the RF signal from time to time. This is especially true under gusty conditions. As part of this research a high precision DSP-based measuring system is devised to accurately measure and characterize the distortions caused by tree foliage on the RF line-of-sight signal. The approach is to digitally generate a signal composed of several tones, up-convert the signal to 2.5 GHz and send it through tree foliage to a receiver where the signal is down-converted and sampled for a duration of five seconds. The samples collected are processed using Matlab to compute the temporal amplitude and phase variations of the tones. The measurement system provides estimates of the amplitude and phase of the receive tones with a time resolution of 3.2 ms. The standard deviation of the amplitude estimates is 0.3\% of the actual amplitude of the tones and the standard deviation of the phase estimates is 0.23 degree. This accuracy is obtained when the signal-to-noise ratio of the receive signal is greater than 20 dB. Measurement in the field with tree foliage in the line-of-sight shows that the swaying of the branches in the wind can cause rapid signal fading. This research determines the type of fade, the depth and duration of the fade, as well as the fading rate.

Recently, the transmission of vector quantization (VQ) over a code-division multiple access (CDMA) channel has received a considerable attention in research community. The complexity of the optimal decoding for VQ in CDMA communications is prohibitive for implementation, especially for systems with a medium or large number of users. A suboptimal approach to VQ decoding over a CDMA channel, disturbed by additive white Gaussian noise (AWGN), was recently developed. Such a suboptimal decoder is built from a soft-output multiuser detector (MUD), a soft bit estimator and the optimal soft VQ decoders of individual users. <p>Due to its lower complexity and good performance, such a decoding scheme is an attractive alternative to the complicated optimal decoder. It is necessary to extend this decoding scheme for a frequency-selective Rayleigh fading CDMA channel, a channel model typically seen in mobile wireless communications. This is precisely the objective of this thesis. <p>Furthermore, the suboptimal decoders are obtained not only for binary phase shift keying (BPSK), but also for M-ary pulse amplitude modulation (M-PAM). This extension offers a flexible trade-off between spectrum efficiency and performance of the systems. In addition, two algorithms based on distance measure and reliability processing are introduced as other alternatives to the suboptimal decoder. <p>Simulation results indicate that the suboptimal decoders studied in this thesis also performs very well over a frequency-selective Rayleigh fading CDMA channel.

A fixed terrestrial wireless system such as the Microwave Multi-channel Distribution Service (MMDS) can be used as the ``last mile' to provide a high speed Internet connection from a base station to a home in a rural or suburban residential area. Such a broadband wireless system works very well under line-of-sight transmission. It works quite well even if the line-of-sight is obstructed with a large number of trees. However, when trees obstruct the line-of-sight, under conditions of wind, the user may experience loss of the RF signal from time to time. This is especially true under gusty conditions. As part of this research a high precision DSP-based measuring system is devised to accurately measure and characterize the distortions caused by tree foliage on the RF line-of-sight signal. The approach is to digitally generate a signal composed of several tones, up-convert the signal to 2.5 GHz and send it through tree foliage to a receiver where the signal is down-converted and sampled for a duration of five seconds. The samples collected are processed using Matlab to compute the temporal amplitude and phase variations of the tones. The measurement system provides estimates of the amplitude and phase of the receive tones with a time resolution of 3.2 ms. The standard deviation of the amplitude estimates is 0.3\% of the actual amplitude of the tones and the standard deviation of the phase estimates is 0.23 degree. This accuracy is obtained when the signal-to-noise ratio of the receive signal is greater than 20 dB. Measurement in the field with tree foliage in the line-of-sight shows that the swaying of the branches in the wind can cause rapid signal fading. This research determines the type of fade, the depth and duration of the fade, as well as the fading rate.