Submitted by LUTH SILVA RAMOS null (lutherair@yahoo.com.br) on 2017-03-29T19:49:44Z No. of bitstreams: 1 Dissertação Luth Ramos 2017 Final.pdf: 2110056 bytes, checksum: 5f14af4841d2cf0a501f307108e2e0b2 (MD5) / Approved for entry into archive by Luiz Galeffi (luizgaleffi@gmail.com) on 2017-03-30T18:14:10Z (GMT) No. of bitstreams: 1 ramos_ls_me_guara.pdf: 2110056 bytes, checksum: 5f14af4841d2cf0a501f307108e2e0b2 (MD5) / Made available in DSpace on 2017-03-30T18:14:10Z (GMT). No. of bitstreams: 1 ramos_ls_me_guara.pdf: 2110056 bytes, checksum: 5f14af4841d2cf0a501f307108e2e0b2 (MD5) Previous issue date: 2017-01-26 / A escassez de combustíveis de origem fóssil tem preocupado setores energéticos e industriais. Outra preocupação eminente são as taxas de emissões de poluentes na atmosfera, causado pelo processo de combustão. Estes processos são responsáveis por grande parte de toda energia primária produzida no mundo. Sendo assim, os bicombustíveis tem sido uma alternativa que atende ambas as preocupações. Neste cenário, a atomização também assume uma importante função dentro da combustão de líquidos. O atomizador tem por objetivo desintegrar o combustível líquido em pequenas gotículas, misturando-se com o oxidante na proporção correta e nas condições adequadas, para produzir um processo de combustão eficiente e estável, reduzindo significativamente as formações de fuligens. O objetivo deste trabalho é realizar um estudo teórico de um atomizador do tipo jato-Y, para atomizar misturas de combustíveis com diferentes proporções de QAV-1 + farnesano, QAV-1 + etanol e farnesano + etanol, analisando experimentalmente as propriedades físico-químicas das misturas de combustíveis e teoricamente as características e a qualidade do spray gerado, fazendo uso da equação de Wigg para calcular o MMD (diâmetro médio de gotas). Através das propriedades físico-químicas das misturas de combustíveis é possível analisar possíveis alternativas de combustíveis que podem apresentar características “drop-in” e substitua parcialmente ou definitivamente o QAV-1 (querosene de aviação) atualmente consumido. Qualitativamente o spray gerado possui o MMD entre 30 e 40 µm, podendo variar de acordo com a temperatura de trabalho. Sendo assim o atomizador torna-se favorável para um processo de combustão eficiente. / The scarcity of fossil fuels has worried the energetic and industrials sectors. Concern also exists about emissions and their impact on the environment, which are a byproduct of the petroleum combustion processes. These processes account for much of the primary energy produced in the world. However, biofuels have been an alternative that meets both concerns. In this scenario, the atomization also assumes an important function in the combustion of liquids. The atomizer has goal to disintegrate the liquid fuel in small droplets to have the mixture of fuel/oxidant in the suitable ratio, to produce an efficient and stable combustion process, significantly reducing the formation of soot. The objective of this work is perform a theoretical study of one nozzle of the type Y-jet, to atomize binary mix of fuels with different ratio of jet-A1 + farnesane, jet-A1 + ethanol and farnesane + ethanol, experimentally analyzing the physicochemical properties of the mixtures of fuels and theoretically the characteristics and quality of the formed spray, using the Wigg’s equation to calculate the MMD (Mass Median Diameter). Through of the physicochemical properties of the mixtures of fuels, it’s possible to analyze possible alternatives of fuel that may have “drop-in” characteristics and partially or definitively to replace the currently consumed jet-A1 fuel. Qualitatively the formed spray has the MMD between 30 e 40 µm, however can be varied according with the temperature of work. Furthermore, the nozzle is favorable to an efficient combustion process.

Atomization of fuel is an important pre-requisite for efficient combustion in devices such as gas turbines, liquid propellant rocket engines, internal combustion engines and incinerators. The overall objective of the present work is to explore air-assisted atomization strategies for high viscosity fuels and liquids. Air-assisted atomization is a twin-fluid atomization method in which energy of the gas is used to assist the atomization of liquids. Broadly, three categories of air-assisted injection, i.e., effervescent, impinging jet and pre-filming air-blast are studied. Laser-based diagnostics are used to characterize the spray structure in terms of cone angle, penetration and drop size distribution. A backlit direct imaging method is used to study the macroscopic spray characteristics such as spray structure and spray cone angle while the microscopic characteristics are measured using the Particle/droplet imaging analysis (PDIA) technique. Effervescent atomization is a technique in which a small amount of gas is injected into the liquid at high pressure in the form of bubbles. Upon injection, the two-phase mixture expands rapidly and shatters the liquid into droplets and ligaments. Effervescent spray characteristics of viscous fuels such as Jatropha and Pongamia pure plant oils and diesel are studied. Measurements are made at various gas-to-liquid ratios (GLRs) and injection pressures. A Sauter Mean Diameter (SMD) of the order of 20 µm is achieved at an injection pressure of 10 bar and GLR of 0.2 with viscous fuels. An image-based method is proposed and applied to evaluate the unsteadiness in the spray. A map indicating steady/unsteady regime of operation has been generated. An optically accessible injector tip is developed which has enabled visualization of the two-phase flow structure inside the exit orifice of the atomizer. An important contribution of the present work is the correlation of the two-phase flow regime in the orifice with the external spray structure. For viscous fuels, the spray is observed to be steady only in the annular two-phase flow regime. Unexpanded gas bubbles observed in the liquid core even at an injection pressure of 10 bar indicate that the bubbly flow regime may not be beneficial for high viscosity oils. A novel method of external mixing twin-fluid atomization is developed. In this method, two identical liquid jets impinging at an angle are atomized using a gas jet. The effect of liquid viscosity (1 cP to 39 cP) and surface tension (22 mN/m to 72 mN/m) on this mode of atomization is studied by using water-glycerol and water-ethanol mixtures, respectively. An SMD of the order of 40 µm is achieved for a viscosity of 39 cP at a GLR of 0.13 at a liquid pressure of 8 bar and gas pressure of 5 bar. It is observed that the effect of liquid properties is minimal at high GLRs where the liquid jets are broken before the impingement as in the prompt atomization mode. Finally, a pre-filming air-blast technique is explored for transient spray applications. An SMD of 22 µm is obtained with diesel at liquid and gas pressures as low as 10 bar and 8.5 bar, respectively. With this technique, an SMD of 44 µm is achieved for Jatropha oil having a viscosity 10 times higher than that of diesel.