L'énergie nucléaire est l’un des moteurs de notre société moderne et, malgré des controverses, est considérée comme la forme d'énergie la plus efficace et la plus écologique. Néanmoins, elle est également à l'origine de nombreuses craintes : de part les déchets fortement radiotoxiques produits par les réacteurs et aussi les risques éventuels d’accidents nucléaires qui posent, sur la santé publique et l'environnement, de graves problèmes. Dans ce contexte, l'objectif de ce projet était de proposer de nouveaux matériaux innovants, capables de piéger efficacement les radionucléides dans les milieux aqueux contaminés. Un nouveau polymère est décrit et a été synthétisé à la fois en solution en utilisant la polymérisation radicalaire contrôlée de type Cu0-CRP mais également à partir de différents substrats comme le PET et le PVC, ce dernier s’étant révélé le plus efficace. Ces nouveaux matériaux ont ensuite été testés et se sont avérés très performants dans le piégeage de l'uranium et de nombreux lanthanides dans l'eau. Ces résultats ont de nombreuses applications potentielles dans l'industrie nucléaire. Ils peuvent être utilisés pour récupérer l'uranium de l'eau de mer comme une future source d'énergie renouvelable. Ils peuvent également contribuer à l'industrie de la gestion des déchets nucléaires, en permettant d’extraire les actinides et/ou lanthanides des effluents radioactifs. En plus, ces matériaux sont prometteurs dans le domaine du traitement des eaux radio-contaminées et la radiodétoxification des organismes vivants, y compris les humains. / Nuclear energy is the true engine of our modern day society and seen as the most efficient and clean form of energy. At the same time, it is the source of many concerns, with its highly radiotoxic waste produced by nuclear reactors and the public health and environmental risks that follow nuclear accidents. In this context, the aim of this project was to come up with new innovative materials, capable of efficiently trap radionuclides in contaminated aqueous media. A new polymer is reported and synthesized in solution as a free polymer, using the easy, cheap and fast metallic copper-mediated controlled radical polymerization (Cu0-CRP). The new polymer was also built from different substrates like PET and PVC, the latter being the most efficient. These new materials were later put to test and proved to be highly performing in trapping uranium and many lanthanides in water. These results have many implications in the nuclear industry. They can be used to harvest uranium from seawater as a future renewable energy source. They can also help the nuclear waste management industry. They are also a potential candidate for treating radio-contaminated environments and for radiodetoxification of living species, including humans.

In this study, surface modification of both organic and inorganic substrates (in terms of cellulose and silica nanoparticles, respectively) has been explored using surface-initiated atom transfer radical polymerisation (ATRP). The desire to modify bio-based materials to fit into new application areas and the need for bio-based materials with improved material properties is steadily increasing due to environmental concern. Superhydrophobic and self-cleaning cellulose surfaces were fabricated by combining ATRP with post-functionalisation. Glycidyl methacrylate was grafted from filter paper, and the epoxide groups were used as reactive handles to create a branched “graft-on-graft” architecture. Post-functionalisation of this architecture with perfluorinated chains or alkyl chains resulted in the formation of superhydrophobic surfaces. Grafting of N-isopropylacrylamide (NIPAAm) from filter paper yielded cellulose surfaces capable of switching the wettability, from hydrophilic to hydrophobic, in response to changes in temperature. The wettability of cellulose surfaces grafted with poly(4-vinylpyridine) (P4VP) could be adjusted from hydrophilic to hydrophobic by changing pH. Furthermore, cellulose surfaces responding to changes in both pH and temperature were obtained via grafting of block copolymers of PNIPAAm and P4VP. The use of inorganic nano-particles in composites has attracted considerable academic and industrial interest due to their excellent mechanical and thermal properties. Styrene was grafted from the surface of silica nanoparticles using ATRP. The resulting organic-inorganic hybrid materials did not aggregate to the same extent as the un-modified silica particles. The polystyrene-modified silica particles were used for the fabrication of honeycomb membranes. It was evident that the pore sizes and the number of porous layers could be tuned by varying the conditions used for film casting. To broaden the range of polymers available for film casting into honeycomb membranes, a block copolymer of polystyrene and poly(methyl methacrylate) was grafted from silica nanoparticles. Polymer-blends of polystyrene-modified particles and poly(9,9´-dihexylfluorene) (PDHF) were also used as an alternative to incorporate functionality into honeycomb membranes. / QC 20100901

The potential use of renewable, bio-based polymers in high-technological applications has attracted great interest due to increased environmental concern. Cellulose is the most abundant biopolymer resource in the world, and it has great potential to be modified to suit new application areas. The development of controlled polymerization techniques, such as atom transfer radical polymerization (ATRP), has made it possible to graft well-defined polymers from cellulose surfaces. In this study, graft-modification of cellulose substrates by ATRP was explored as a tool for tailoring surface properties and for the fabrication of functional cellulose surfaces. Various native and regenerated cellulose substrates were successfully graft-modified to investigate the effect of surface morphology on the grafting reactions. It was found that significantly denser polymer brushes were grafted from the native than from the regenerated cellulose substrates, most likely due to differences in surface area. A method for detaching the grafted polymer from the substrate was developed, based on the selective cleavage of silyl ether bonds with tetrabutylammonium fluoride. The results from the performed kinetic study suggest that the surface-initiated polymerization of methyl methacrylate from cellulose proceeds faster than the concurrent solution polymerization at low monomer conversions, but slows down to match the kinetics of the solution polymerization at higher conversions. Superhydrophobic and self-cleaning bio-fiber surfaces were obtained by grafting of glycidyl methacrylate using a branched graft-on-graft architecture, followed by post-functionalization to obtain fluorinated polymer brushes. AFM analysis showed that the surface had a micro-nano-binary structure. It was also found that superhydrophobic surfaces could be achieved by post-functionalization with an alkyl chain, with no use of fluorine. Thermo-responsive cellulose surfaces have been prepared by graft-modification with the stimuli responsive polymer poly(N-isopropylacrylamide) (PNIPAAm). Brushes of poly(4-vinylpyridine) (P4VP) rendered a pH-responsive cellulose surface. Dual-responsive cellulose surfaces were achieved by grafting block-copolymers of PNIPAAm and P4VP. / QC 20100804

Des couches fonctionnelles hybrides organiques/inorganiques ont été générées à une interface solide/liquide à l’aide d’une nouvelle technique de fabrication ascendante (bottomup) dénommée Croissance de Couche à partir d’une Surface (Surface Grown Layers - SgL)grâce à une modulation très fine de l’interaction électrostatique entre nano-objets decharges opposés en fonction de la force ionique de la dispersion aqueuse. Différents nanoparticules/tubes à la fois cationiques et anioniques et très stables vis-à-vis d’un environnement fortement salin ont été développés. La complexation électrostatique entre ces nanomatériaux a été étudiée en solution et près d’une interface au travers du concept de “transition de dessalage”. Dans un deuxième temps la croissance de couches hybrides à partird’un substrat a été étudiée en comparant l’approche SgL et la méthode classique d’adsorption séquentielle couche par couche (Layer by layer - LbL). Des expériences préliminaires ont montré le potentiel de cette approche dans le développement de substrats fonctionnels. / In this manuscript, one-step bottom-up fabrication of “smart organic-inorganic hybridfunctional layers” at a liquid/solid interface were fabricated via a novel surfacefunctionalization pathway termed as “Surface Grown Hybrid Functional Layers” or SgLthrough fine tuning of electrostatic interaction between “highly stable” and oppositelycharged nanomaterials as a function of ionic strength of the dispersion. Cationic and anionicnanomaterials based on different hybrid nanoparticles/nanotubes that are very stable towardshigh saline environment have been formulated. The electrostatic complexation between theseoppositely charged nanomaterials has been studied in bulk and at an interface through theconcept of “desalting transition” pathway. In a second step, the growth of functional hybridlayers directly from a substrate via the novel SgL approach was then compared with theconventional Layer-by-Layer approach (LbL). Finally the preliminary experiments haveshown the potential applications of generated functional surfaces.

Biological hydrogels such as collagen and gelatin are highly attractive materials for tissue engineering and biomedicine. Due to their excellent biocompatibility and biodegradability, they represent promising candidates in regenerative medicine, cell culture, tissue replacement and wound dressing applications. Thereby, precisely tuned material properties are indispensable for customization. High-energy electron-treatment is a highly favourable crosslinking technique to tailor the material properties. In five sub-projects, this thesis investigates the potential of high-energy electron-treatment to precisely modify collagen hydrogels, to develop thermo- as well as hydration-sensitive systems and functional surfaces from gelatin for biomedical applications. The first sub-project focusses on the modification of collagen hydrogels by electron-induced crosslinking with potential application as biomimetic extracellular matrix material. Thereby, it is shown that the material properties can be precisely tailored by adapting electron-induced crosslinking while high cytocompatibility is maintained. Within the second sub-project, an electron-crosslinking-induced shape-memory effect in gelatin is described in order to develop a thermo-responsive system. The effect is described experimentally as well as theoretically to demonstrate the fundamental physical processes. The third sub-project develops an electroncrosslinked hydration-sensitive gelatin system. The work discusses how swelling of electroncrosslinked gelatin is influenced by the pH-value and salt concentration of the swelling liquid. Thereby, response of the hydration-sensitive gelatin system can be further modified towards biological actuatoric systems. The fourth sub-project develops a two-step process to mechanically pattern gelatin surfaces. Within the first step, thin gelatin surfaces are mechanically patterned by a highly focussed electron beam. In a second step, they are stabilized by homogeneous electron-crosslinking for applications at physiological conditions. Another method to develop functional gelatin surfaces is described in the last sub-project. Here, gelatin is topographically patterned via a moulding technique. The resulting micro-structures are then stabilized via electron-crosslinking. In addition, the presented work investigates pattern transfer, long time stability at physiological conditions as well as cytocompatibility.:1 Introduction and Objective 1.1 Biomimetic ECM Models 1.2 Stimuli-Responsive Hydrogels 1.3 Functional Hydrogel Surfaces 2 General Background 2.1 Hydrogels 2.1.1 Collagen 2.1.2 Gelatin 2.2 Polymer Crosslinking 2.2.1 High-Energy Electron-Treatment of Polymers 2.2.2 Electron-Irradiation-Induced Crosslinking of Gelatin 2.3 High-Energy Electron Accelerator 3 Cumulative Part 3.1 High-Energy Electron-Induced Modification of Collagen 3.2 Thermo-Responsive Gelatin System 3.3 Hydration-Responsive Gelatin System 3.4 Mechanically Patterned Gelatin Surfaces 3.5 Topographically Patterned Gelatin Surfaces 4 Summary and Conclusion 5 Outlook Bibliography Author Contributions List of Abbreviations List of Figures Acknowledgements Scientific Curriculum Vitae Publication List Selbstständigkeitserklärung / Biologische Hydrogele wie Kollagen und Gelatine sind wichtige Materialien vor allem in biomedizinischen Anwendungsbereichen. Durch deren exzellente Biokompatibilität und biologische Abbaubarkeit werden sie vor allem bei der Züchtung von biomimetischem Gewebe, in der Zellkultur, als Gewebeersatz in der regenerativen Medizin oder auch als Wundverband eingesetzt. In der Verwendung solcher Materialien besteht eine wesentliche Herausforderung darin, deren Eigenschaften so präzise wie möglich einzustellen, um speziell angepasste Substrate und Gewebe entwickeln zu können. Eine äußerst vorteilhafte Methode zu Adaptierung der Materialeigenschaften ist die elektronenstrahlbasierte Vernetzung, die auf die Verwendung zusätzlicher chemischer Vernetzer verzichtet. Die vorgelegte Arbeit untersucht in fünf Teilprojekten das Potential von Elektronenstrahlvernetzung zur Modifizierung von Kollagen- sowie Gelatinehydrogelen für biomedizinische Anwendungen. Das erste Teilprojekt fokussiert sich auf die Auswirkungen hochenergetischer Elektronen auf Kollagenhydrogele und deren Eigenschaften für potentielle Anwendungen als biomimetisches Modell der extrazellulären Matrix. Dabei wird gezeigt, dass sich die Materialeigenschaften in Abhängigkeit der Elektronenbestrahlung präzise einstellen lassen und dass diese Gele eine hohe Zellkompatibilität aufweisen. Das zweite Teilprojekt beschreibt den Effekt des thermischen Formgedächtnisses in Gelatine nach Elektronenstrahlvernetzung und dessen Potential für die Entwicklung biologischer Aktuatoren. Die Effizienz des Formgedächtniseffekts wird in diesem Teilprojekt ausführlich theoretisch beschrieben und mit experimentellen Untersuchungen an Gelatine verglichen. Im dritten Teilprojekt wird ein elektronenstrahlvernetztes, hydrations-responsives Gelatinesystem beschrieben. Zusätzlich wird der Einfluss von pH-Wert und Salzkonzentration der Quelllösung auf das Quellen von elektronenstrahlvernetzter Gelatine untersucht um das Reaktionsverhalten noch präziser einstellen zu können. Das vierte Teilprojekt beschreibt einen Zwei-Schritt-Prozess, bei dem dünne Gelatineschichten mittels hochenergetischer Elektronen mechanisch funktionalisiert werden können. Dabei wird in einem ersten Schritt die Oberfläche durch hoch fokussierte Elektronen mechanisch strukturiert, um im zweiten Schritt mittels homogener Elektronenstrahlvernetzung für die Anwendung unter physiologischen Bedingungen stabilisiert zu werden. Eine weitere Methode zur Funktionalisierung der Oberfläche von Gelatinehydrogelen wird im letzten Teilprojekt dieser Arbeit dokumentiert. Dabei werden topographische Mikrostrukturen auf Gelatineoberflächen aufgebracht und mittels Elektronenstrahlvernetzung stabilisiert. Dieses Teilprojekt untersucht zusätzlich den Strukturtransfer, die Langzeitstabilität unter physiologischen Bedingungen sowie die Zellkompatibilität.:1 Introduction and Objective 1.1 Biomimetic ECM Models 1.2 Stimuli-Responsive Hydrogels 1.3 Functional Hydrogel Surfaces 2 General Background 2.1 Hydrogels 2.1.1 Collagen 2.1.2 Gelatin 2.2 Polymer Crosslinking 2.2.1 High-Energy Electron-Treatment of Polymers 2.2.2 Electron-Irradiation-Induced Crosslinking of Gelatin 2.3 High-Energy Electron Accelerator 3 Cumulative Part 3.1 High-Energy Electron-Induced Modification of Collagen 3.2 Thermo-Responsive Gelatin System 3.3 Hydration-Responsive Gelatin System 3.4 Mechanically Patterned Gelatin Surfaces 3.5 Topographically Patterned Gelatin Surfaces 4 Summary and Conclusion 5 Outlook Bibliography Author Contributions List of Abbreviations List of Figures Acknowledgements Scientific Curriculum Vitae Publication List Selbstständigkeitserklärung