No description available.

[pt] Uma sonda fotoluminescente do tipo turn-off foi avaliada para a detecção de Hg(2+) usando pontos quânticos de grafeno (GQDs). Diferentes nanopartículas de carbono fotoluminescentes foram preparadas usando a abordagem bottom-up, usando ácido cítrico ou ácido cítrico misturado com algum composto contendo enxofre (tioureia, tioacetamida ou glutationa). Dispersões desses GQDs foram comparadas em termos de comportamento fotofísico na presença de Hg(2+). Observou-se que as nanopartículas preparadas com ácido cítrico e tioureia (GQDs- TU) apresentaram melhor perfil de supressão fotoluminescente (resposta analítica) na presença de Hg(2+). As condições experimentais foram ajustadas para o melhor perfil de resposta e para obter os parâmetros analíticos de mérito. Um estudo para avaliar possíveis interferências na presença de outros íons de metais pesados além de íons alcalinos e alcalino-terrosos, comumente presentes em amostras de água natural. A curva analítica normalizada (concentração L0/L versus Hg(2+) foi linear (R(2) = 0,998) até 0,20 microgramas L(-1). O limite de quantificação (LOQ) foi de 10 microgramas L(-1) e o limite de detecção (LOD) foi de 3 microgramas L(-1) para o ensaio em batelada. Além disso, a estratégia proposta para a determinação indireta de Hg(2+) foi adaptada para um sistema de análise por injeção em fluxo (FIA). Após a otimização do ensaio, com a faixa linear cobrindo o intervalo até 900 microgramas L(-1) (R(2)= 0,999), os valores de LOD e LOQ foram 24 microgramas L(-1) e 80 microgramas L(-1), respectivamente. A recuperação na amostra simulada de água fortificada foi de 99,4 por cento mais ou menos 1,2. / [en] A photoluminescent turn-off probe was evaluated for the detection of Hg(2+) based on graphene quantum dots (GQDs). Different photoluminescent carbon nanoparticles were prepared using the bottom-up approach, with citric acid and with citric acid mixed with some sulfur compound (thiourea, thioacetamide or glutathione). Dispersions of these GQDs were compared in terms of photophysical behavoior in the presence of Hg(2+) . It was observed that the nanoparticles prepared with citric acid and thiourea (GQDs-TU) presented a better linear photoluminescent suppression (analytical response) in the presence of Hg(2+). Experimental conditions were adjusted to improve analytical response and to obtain analytical figures of merit. A study to evaluate potential interferences in the presence of other heavy metal ions and alkaline and alkaline-earth ions, commonly present in natural water samples. The normalized analytical curve (L0/L versus Hg(2+) concentration) was linear (R(2) = 0.998) up to 0.20 micrograms (L-1). The limit of quantification (LOQ) was 10 micrograms L(-1) and the limit of detection (LOD) was 3 micrograms L(-1) for the batch assay. In addition, the proposed strategy for indirect determination of Hg2+ was applied in a flow injection analysis system (FIA). After optimization of the assay, linear range covered a range up to 900 micrograms L(-1) (R(2) = 0.999) with LOD of 24 micrograms L(-1) and LOQ of 80 micrograms L(-1). The recovery in the fortified water sample was 99.4 percent.

<p>The goal of this research project is to synthesize, characterize, and examine the properties of a material that undergoes a decrease in refractive index upon exposure to light. It is anticipated that such photoresponses could elicit previously unknown nonlinear phenomena including self-trapped black beams. An appropriate material for these investigations would be a polymer cross-linked by photocleavable groups causing a Δ<em>n</em> < 0. Organo-ditellurides, molecules that contain a Te-Te bond, would be appropriate for the crosslinks as their σ*_Te-Te ← n_Te transition usually absorbs light between 400 and 500 nm, and can lead to photodissociation of the chalcogen-chalcogen bond.</p> <p>Initial attempts to directly functionalize a polymer (polystyrene) resulted in intractable solids. A more promising approach relies on the preparation of cross-linking agents followed by co-polymerization. Despite literature claims, to date, there is no structurally authenticated photoresponsive molecule that simultaneously contains vinyl (CH=CH) and telluride (-Te-) functional groups. The work in this thesis has yielded what would be the first example, in addition to a crystal structure obtained by X-ray diffraction, the compound has been characterized by multinuclear NMR (¹H, ¹³C, ¹²⁵Te) and vibrational spectroscopy with the support of DFT calculations.</p> / Master of Science (MSc)

The synthesis of dipyridyl functionalized polysulfones with improved hydrophilicity, enhanced membrane morphology and excellent ATRP polymeric ligand properties was conducted by the following method: (a) the formation of lithiated polysulfone from unmodified polysulfone and the subsequent reaction with 2,2'-vinylidenedipyridine in tetrahydrofuran at -78 oC under argon atmosphere to afford the corresponding dipyridyl functionalized polysulfone. The stoichiometry of the reaction affects the degree of functionalization of the product. When equimolar amounts of 2,2'-vinylidenedipyridine are added to the lithiated polysulfone, the degree of functionalization obtained was 45%. However, the addition of 10% and 20% molar excess of 2,2'-vinylidenedipyridine to the corresponding lithiated polysulfone produced dipyridyl functionalized polysulfones with degrees of functionalization of 80% and 95%, respectively; and (b) the membranes obtained from unmodified polysulfone as well as dipyridyl functionalized polysulfones were characterized by atomic force microscopy, scanning electron microscopy, pure water permeation measurements and contact angle measurements. Amine chain end functionalized polystyrene and poly(methyl methacrylate) were prepared by Atom Transfer Radical Polymerization (ATRP) methods as follows: (a) •-Aminophenyl functionalized polystyrene was prepared in quantitative yields by ATRP methods using a new primary amine functionalized initiator adduct, formed in situ by the reaction of 1-(4-aminophenyl)-1-phenylethylene and (1-bromoethyl)benzene in the presence of copper (I) bromide/2,2'-bipyridyl as catalyst in diethyl ether at 110 oC, for the polymerization of styrene.(b) New •-bis(aminophenyl) and •,ω-tetrakis(aminophenyl) functionalized polymers were prepared in quantitative yields by the ATRP method using the following synthetic strategy: (i) the initiation of styrene polymerization with a new primary diamine functionalized initiator adduct, generated in situ by the reaction of stoichiometric amounts of 1,1-bis(4-aminophenyl)ethylene with (1-bromoethyl)benzene in the presence of copper (I) bromide/2,2'-bipyridyl as catalyst, afforded •-bis(aminophenyl) functionalized polystyrene; and (ii) •-bis(aminophenyl) functionalized poly(methyl methacrylate) was prepared by the ATRP method using the primary diamine functionalized initiator adduct as initiator for methyl methacrylate polymerization; and (iii) well defined •,ω-tetrakis(aminophenyl) functionalized polystyrene was prepared by the post ATRP chain end modification reaction of •-bis(aminophenyl) functionalized polystyrene with 1,1-bis(4-aminophenyl)-ethylene at the completion of the polymerization reaction. (c) Similarly, •-bis(4-dimethylaminophenyl) functionalized polystyrene was prepared by using a new tertiary diamine functionalized initiator adduct, formed in situ by treatment of equimolar amounts of 1,1-bis[(4-dimethylamino)phenyl]-ethylene with (1-bromoethyl)benzene in the presence of copper (I) bromide/2,2'-bipyridyl as the catalyst in diphenyl ether at 110 oC for the initiation of styrene polymerization by the ATRP method. Furthermore, the ATRP of methyl methacrylate, initiated by the new tertiary diamine functionalized initiator adduct, produced •-bis(4-dimethylaminophenyl) functionalized poly(methyl methacrylate). In addition, •,ω-tetrakis(4-dimethylaminophenyl) functionalized polystyrene was synthesized via a post ATRP chain end modification reaction of •-bis(4-dimethylaminophenyl) functionalized polystyrene with equimolar amounts of 1,1-bis[(4-dimethylamino)phenyl]ethylene at the completion of the polymerization process. vi Quantitative yields of the different amine functionalized polymers with predictable number average molecular weights (Mn = 1.3 x 103 – 16.4 x103 g/mol), narrow molecular weight distributions (Mw/Mn = 1.03 – 1.29) and controlled chain end functionality were obtained. Polymerization kinetics data was employed to determine the controlled/living character of each ATRP reaction leading to the formation of the different amine chain end functionalized polymers. The polymerization processes were monitored by gas chromatographic analyses. Polymerization kinetics measurements for all reactions show that the polymerizations follow first order rate kinetics with respect to monomer consumption. The number average molecular weight of the amine functionalized polymers increases linearly with percentage monomer conversion and polymers with narrow molecular weight distribution were obtained. The ATRP of styrene, catalyzed by a novel dipyridyl functionalized polysulfone/CuBr supported catalyst system, afforded well defined polystyrene with predictable number average molecular weight and narrow molecular weight distribution in a controlled/living free radical polymerization process. The substituted 1,1-diphenylethylene initiator precursor derivatives and the functionalized polymers were characterized by nuclear magnetic resonance spectrometry, fourier transform infrared spectroscopy, thin layer chromatography, column chromatography, size exclusion chromatography, non-aqueous titrations, differential scanning calorimetry and thermogravimetrical analysis. / Chemistry / M. Sc. (Chemistry)

Na busca de um melhor entendimento das propriedades eletrônicas e magnéticas dos isolantes topológicos nos deparamos com uma das suas caraterísticas mais marcantes, a existência de estados de superfície metálicos com textura helicoidal de spin os quais são protegidos de impurezas não magnéticas. Na superfície estes canais de spin possuem um potencial enorme para aplicações em dispositivos spintrônicos. Muito há para se fazer e o tratamento via cálculos de primeiros princípios por simulações permite um caráter preditivo que corrobora na elucidação de fenômenos físicos via análises experimentais. Nesse trabalho analisamos as propriedades eletrônicas de isolantes topológicos tais como: (Bi,Sb)$_2$(Te,Se)$_3$, Germaneno e Germaneno funcionalizado. Cálculos baseados em DFT evidenciam a importância das separações entre as camadas de Van der Waals nos materiais Bi$_2$Se$_3$ e Bi$_2$Te$_3$. Mostramos que devido a falhas de empilhamento, pequenas oscilações no eixo de QLs (\\textit{Quintuple Layers}) podem gerar um desacoplamento dos cones de Dirac, além de criar estados metálicos na fase \\textit{bulk} de Bi$_2$Te$_3$. Em se tratando do Bi$_2$Se$_3$ um estudo sistemático dos efeitos de impurezas de metais de transição foi realizado. Observamos que há quebra de degenerescência do cone de Dirac se houver magnetização em quaisquer dos eixos. Além disso se a magnetização permanecer no plano, além de uma pequena quebra de degenerescência, há um deslocamento do mesmo para outro ponto da rede recíproca. No entanto, se a magnetização apontar para fora do plano a quebra ocorre no próprio ponto $\\Gamma$, porém de maneira mais intensa. Importante enfatizar que além de mapear os sítios com suas orientações magnéticas de menor energia observamos que a quebra da degenerescência está diretamente relacionada com a geometria local da impureza. Isso proporciona imagens de STM distintas para cada sítio possível, permitindo que um experimental localize cada situação no laboratório. Estudamos ainda a transição topológica na liga (Bi$_x$Sb$_{1-x}$)$_2$Se$_3$, onde identificamos um isolante trivial e topológico para $x=0$ e $x=1$. Apesar de óbvia a existência de tal transição, detalhes importantes ainda não estão esclarecidos. Concluímos que a dopagem com impurezas não magnéticas proporciona uma boa técnica para manipulação e engenharia de cone nesta família de materiais, de forma que dependendo da faixa de dopagem podemos eliminar a condutividade que advém do \\textit{bulk}. Finalmente estudamos superfícies de Germaneno e Germaneno funcionalizado com halogênios. Usando uma funcionalização assimétrica e com a avalição do invariante topológico $Z_2$ notamos que o material Ge-I-H é um isolante topológico podendo ser aplicado na elaboração de dispositivos baseados em spin. / In the search of a better understanding of the electronic and magnetic properties of topological insulators we are faced with one of its most striking features, the existence of metallic surface states with helical spin texture which are protected from non-magnetic impurities. On the surface these spin channels allows a huge potential for applications in spintronic devices. There is much to do and treating calculations via \\textit{Ab initio} simulations allows us a predictive character that corroborates the elucidation of physical phenomena through experimental analysis. In this work we analyze the electronic properties of topological insulators such as: (Bi, Sb)$_2$(Te, Se)$_3$, Germanene and functionalized Germanene. Calculations based on DFT show the importance of the separation from interlayers of Van der Waals in materials like Bi$_2$Se$_3$ and Bi$_2$Te$_3$. We show that due to stacking faults, small oscillations in the QLs axis (\\textit{Quintuple Layers}) can generate a decoupling of the Dirac cones and create metal states in the bulk phase Bi$_2$Te$_3$. Regarding the Bi$_2$Se$_3$ a systematic study of the effects of transition metal impurities was performed. We observed that there is a degeneracy lift of the Dirac cone if there is any magnetization on any axis. If the magnetization remains in plane, we observe a small shift to another reciprocal lattice point. However, if the magnetization is pointing out of the plane a lifting in energy occurs at the very $ \\Gamma $ point, but in a more intense way. It is important to emphasize that in addition to mapping the sites with their magnetic orientations of lower energy we saw that the lifting in energy is directly related to the local geometry of the impurity. This provides distinct STM images for each possible site, allowing an experimental to locate each situation in the laboratory. We also studied the topological transition in the alloy (Bi$_x$Sb$_{1-x}$)$_ 2$Se$_3$, where we identify a trivial and topological insulator for $x = 0$ and $x = 1$. Despite the obvious existence of such a transition, important details remain unclear. We conclude that doping with non-magnetic impurities provides a good technique for handling and cone engineering this family of materials so that depending on the range of doping we can eliminate conductivity channels coming from the bulk. Finally we studied a Germanene and functionalized Germanene with halogens. Using an asymmetrical functionalization and with the topological invariant $Z_2$ we noted that the Ge-I-H system is a topological insulator that could be applied in the development of spin-based devices.

L’objectif ici était de développer une méthode de détection des tumeurs cérébrales via des agents de contraste pour l’IRM du 19F à 7 teslas. Nous évaluons en particulier le potentiel de cette méthode à mettre en évidence l’angiogenèse tumorale à l’aide d’agents de contraste fonctionnalisés avec le peptide RGD et ciblant l’intégrine ανβ3, biomarqueur surexprimé à la surface des néo-vaisseaux irriguant la tumeur. Du fait des basses concentrations locales en agent de contraste, les efforts portent dans un premier temps sur l’optimisation d’une séquence multi échos de spin dédiée à l’imagerie du PFOB (perfluorooctyl bromure), perfluorocarbure biocompatible choisi pour constituer la base de nos agents de contraste. Nous montrons qu’un paramétrage minutieux de cette séquence permet la suppression de la J-modulation et un rehaussement du T2, conduisant à une excellente sensibilité in vitro. La séquence est ensuite testée pour des mesures d’oxygénation dans le foie et la rate chez la souris, après injection d’une émulsion de PFOB. Les résultats indiquent une très bonne précision des mesures après injection d’une seule dose d’émulsion. Notre séquence est également utilisée pour réaliser une étude de biodistribution dynamique, permettant de suivre l’accumulation des nanoparticules d’émulsion dans le foie et la rate juste après injection. Nous montrons par ailleurs qu’il est possible d’évaluer la furtivité d’émulsions contenant différentes quantités de PEG (Poly Ethylène Glycol) en ajustant les données expérimentales sur un modèle pharmacocinétique empirique. La séquence est enfin utilisée pour détecter des nanoparticules d’émulsions fonctionnalisées pour cibler l’intégrine ανβ3 dans un modèle souris U87 de glioblastome. Nous comparons les concentrations en agent de contraste obtenues dans la tumeur avec une émulsion contenant le peptide RGD, et une émulsion contrôle. Les résultats indiquent des concentrations significativement plus élevées avec l’émulsion RGD qu’avec l’émulsion contrôle, supposant un ciblage spécifique d’ανβ3 par les nanoparticules fonctionnalisées. Un dernier chapitre est dédié à une nouvelle méthode de spectroscopie de diffusion en 19F, dont le but est d’éliminer le signal vasculaire provenant des nanoparticules de PFOB circulantes afin d’évaluer le signal ne provenant que des particules liées. / This study aimed at developing a method for detection of brain tumors at 7 teslas thanks to 19F MRI contrast agents. We particularly assessed the potential of this method to highlight tumor angiogenesis with RGD-functionalized contrast agents targeting ανβ3 integrin, a biomarker over-expressed at the surface of new capillary blood vessels. Owing to low local concentrations in contrast agent, the first step consisted in optimizing a multi spin echo sequence dedicated to a well-known biocompatible perfluorocarbon, perfluorooctylbromide (PFOB). We show that careful adjustment of sequence parameters allows cancellation of J-modulation and T2 enhancement, and yields an excellent sensitivity in vitro. Our sequence was then tested for oxygenation measurements in the mouse liver and spleen after injection of a PFOB emulsion. The results demonstrate very good accuracy of the measurements after one single infusion of emulsion. We also perform a dynamic biodistribution study in order to monitor emulsion nanoparticle uptake in the liver and spleen. Moreover, we show that stealth of emulsions grafted with different quantities of polyethylene glycol (PEG) can be assessed by fitting experimental data with a pharmacokinetic empirical model. Our sequence was finally used to visualize ανβ3-targeted nanoparticles in a U87 glioblastoma mouse model. Concentrations found in tumors after injection of an RGD-functionalized emulsion and a control emulsion are compared. Concentrations are found to be significantly higher with the RGD emulsion than with the control emulsion, suggesting specific binding of functionalized nanoparticles with ανβ3 integrin. The last part is dedicated to a new diffusion-weighted 19F NMR spectroscopy sequence. This method aims at suppressing vascular signal coming from circulating PFOB nanoparticles in order to evaluate signal coming from bound nanoparticles only.

Le but de cette étude est de concevoir, fabriquer et caractériser une puce microfluidique afin de mettre en oeuve la capture de nanoparticules magnétiques fonctionnalisées en vue de la reconnaissance d’anticorps spécifiques (couplage d’une très grande spécificité et sensibilité). Après avoir modélisé et simulé les performances de la microbobine intégrée dans le canal de la puce microfluidique en prenant soin de limiter la température du fluide à 37°C, la capture devant être effective, le microsystème est fabriqué en salle blanche en utilisant des procédés de fabrication collective. La fabrication du microdispositif en PDMS a aussi donné lieu à l’optimisation de procédés de modification de surface afin d’assurer la ré-utilisation du microdispositif (packaging réversible) et la limitation de l’adsorption non spécifique. L’immobilisation des anticorps su les billes (300 nm) a été menée à l’intérieur du canal en utilisant un protocole de type ELISA éprouvé. Le procédé a montré qu’il était également efficient pour cet environnement puisque nous avons pu mettre ne évidence la capture de nanoparticules / In this study, a concept of microfluidic chip with embedded planar coils is designed and fabricated for the aim of trapping effectively functionalized magnetic nanobeads and immobilizing antibody (IgG type). The planar coils as a heart of microfluidic chip is designed with criterion parameters which are optimized from simulation parameters of the maximum magnetic field, low power consumption and high power efficiency by FE method. The characterization of microcoils such as effectively nanobeads (300 nm) at low temperature (<37oC) is performed and confirmed. The channel network in PDMS material is designed for matching with entire process (including mixing and trapping beads) in microfluidic chip. A process of PDMS’s surface modification is also carried out in the assemble step of chip in order to limit the non-specific adsorption of many bio substances on PDMS surface. The microfluidic chip assemble is performed by using some developed techniques of reversible packaging PDMS microfluidic chip (such as stamping technique, using non-adhesive layer, oxygen plasma combining with solvent treatment). These packaging methods are important to reused microchip (specially the bottom substrate) in many times. The immobilization of antibody IgG-type is performed inside microfluidic chip following the standard protocol of bead-based ELISA in micro test tube. The result showed that IgG antibodies are well grafted on the surface of carboxyl-beads (comparing to result of standard protocol); these grafted antibodies are confirmed by coupling them with labeled second antibody (Fab-FITC conjugation).

This thesis is based on six original research publications describing synthesis, structure and physicochemical and biochemical analysis of chemically modified oligonucleotides (ONs) in terms of their potential diagnostic and therapeutic applications. Synthesis of two types of bicyclic conformationally constrained nucleosides, North-East locked 1',2'-azetidine and North locked 2',4'-aza-ENA, is described. Study of the molecular structures and dynamics of bicyclic nucleosides showed that depending upon the type of fused system they fall into two distinct categories with their respective internal dynamics and type of sugar conformation. The physicochemical properties of the nucleobases in the conformationally constrained nucleosides found to be depended on the site and ring-size of the fused system. The incorporation of azetidine modified nucleotide units into 15mer ONs lowered the affinity toward the complementary RNA. However, they performed better than previously reported isosequential 1',2'-oxetane modified analogues. Whereas aza-ENA-T modification incorporated into ONs significantly enhanced affinity to the complementary RNA. To evaluate the antisense potential of azetidine-T and aza-ENA-T modified ONs, they were subjected to RNase H promoted cleavage as well as tested towards nucleolytic degradation. Kinetic experiments showed that modified ONs recruit RNase H, however with lower enzyme efficiency due to decreased enzyme-substrate binding affinity, but with enhanced turnover number. Both, azetidine-T and aza-ENA-T modified ONs demonstrated improved 3'-exonuclease stability in the presence of snake venom phosphodiesterase and human serum compared to the unmodified sequence. Oligodeoxynucleotides (ODNs) containing pyrene-functionalized azetidine-T (Aze-pyr X) and aza-ENA-T (Aza-ENA-pyr Y) modifications showed different fluorescence properties. The X modified ODNs hybridized to the complementary DNA and RNA showed variable increase in the fluorescence intensity depending upon the nearest-neighbor at the 3'-end to X modification (dA &gt; dG &gt; dT &gt; dC) with high fluorescence quantum yield. However, the Y modified ODNs showed a sensible enhancement of the fluorescence intensity only with complementary DNA. Also, the X modified ODN showed decrease (~37-fold) in the fluorescence intensity upon duplex formation with RNA containing a G nucleobase mismatch opposite to the modification site, whereas a ~3-fold increase was observed for the Y modified probe.

Title from second page of PDF document. Includes bibliographical references (p. 144-152).

Ferrocenylsubstituierte Thiophene: Synthese, Charakterisierung und Polymerisation Technische Universität Chemnitz, Fakultät für Naturwissenschaften Dissertation 2011, 140 Seiten Die Vorliegende Arbeit beschäftigt sich mit der Synthese und dem Reaktionsverhalten von metallocenylhaltigen Thiophenen. Dabei wurden die erhaltenen Metallocenylthiophene mittels Eisen(III)salzen oxidativ polymerisiert und copolymerisiert. Für eine gezielte Synthese von polymeren Verbindungen wurden oligomere Modellverbindungen dargestellt und die erhaltenen Ergebnisse auf eine vielfältig Funktionalisierung in 2- und/oder 5-Position der Thiophenmonomere angewendet. Die somit erhaltenen neuen Monomere lassen verschiedene Polymerisationen und Copolymerisationen, z. B. über eine Negishi-Kreuzkupplungsreaktion zu. Die somit erhaltenen Polymere und Copolymere liegen in der neutralen Form vor und weisen eine regioselektive Kopf-Schwanz-Verknüpfung auf. Es ist damit ein verarbeitbares Polymer zugänglich, welches sowohl im oxidierten Zustand als auch im neutralen Zustand als Polymer-CNT-Hybridmaterial Leitfähig ist.