The time to detection of a visual stimulus by the primate eye is recorded at 100 – 150ms. This near instantaneous recognition is in spite of the considerable processing required by the several stages of the visual pathway to recognise and react to a visual scene. How this is achieved is still a matter of speculation. Rank-order codes have been proposed as a means of encoding by the primate eye in the rapid transmission of the initial burst of information from the sensory neurons to the brain. We study the efficiency of rank-order codes in encoding perceptually-important information in an image. VanRullen and Thorpe built a model of the ganglion cell layers of the retina to simulate and study the viability of rank-order as a means of encoding by retinal neurons. We validate their model and quantify the information retrieved from rank-order encoded images in terms of the visually-important information recovered. Towards this goal, we apply the ‘perceptual information preservation algorithm’, proposed by Petrovic and Xydeas after slight modification. We observe a low information recovery due to losses suffered during the rank-order encoding and decoding processes. We propose to minimise these losses to recover maximum information in minimum time from rank-order encoded images. We first maximise information recovery by using the pseudo-inverse of the filter-bank matrix to minimise losses during rankorder decoding. We then apply the biological principle of lateral inhibition to minimise losses during rank-order encoding. In doing so, we propose the Filteroverlap Correction algorithm. To test the perfomance of rank-order codes in a biologically realistic model, we design and simulate a model of the foveal-pit ganglion cells of the retina keeping close to biological parameters. We use this as a rank-order encoder and analyse its performance relative to VanRullen and Thorpe’s retinal model.

The work described in this thesis is based on the results of a clinical trial conducted by the research team at the Medical Informatics Unit of the University of Cambridge, which show that the Ballistocardiogram (BCG) has prognostic value in detecting impaired left ventricular function before it becomes clinically overt as myocardial infarction leading to sudden death. The objective of this study is to develop and demonstrate a framework for realising an on-line BCG signal classification model in a portable device that would have the potential to find pathological signs as early as possible for home health care. Two new on-line automatic BeG classification models for time domain BeG classification are proposed. Both systems are based on a two stage process: input feature extraction followed by a neural classifier. One system uses a principal component analysis neural network, and the other a discrete wavelet transform, to reduce the input dimensionality. Results of the classification, dimensionality reduction, and comparison are presented. It is indicated that the combined wavelet transform and MLP system has a more reliable performance than the combined neural networks system, in situations where the data available to determine the network parameters is limited. Moreover, the wavelet transfonn requires no prior knowledge of the statistical distribution of data samples and the computation complexity and training time are reduced. Overall, a methodology for realising an automatic BeG classification system for a portable instrument is presented. A fully paralJel neural network design for a low cost platform using field programmable gate arrays (Xilinx's XC4000 series) is explored. This addresses the potential speed requirements in the biomedical signal processing field. It also demonstrates a flexible hardware design approach so that an instrument's parameters can be updated as data expands with time. To reduce the hardware design complexity and to increase the system performance, a hybrid learning algorithm using random optimisation and the backpropagation rule is developed to achieve an efficient weight update mechanism in low weight precision learning. The simulation results show that the hybrid learning algorithm is effective in solving the network paralysis problem and the convergence is much faster than by the standard backpropagation rule. The hidden and output layer nodes have been mapped on Xilinx FPGAs with automatic placement and routing tools. The static time analysis results suggests that the proposed network implementation could generate 2.7 billion connections per second performance.

Many animals, especially flying insects are experts on reacting to approaching predators. For robots, the ability to avoiding collisions is also crucial. In locusts, a visual neuron called the Lobula Giant Movement Detector (LGMD) has been identified to be responsible for evoking collision avoidance behaviours. It has been modelled for collision avoidance on large robots or vehicles whose computational power are abundant. For micro robots, however, the limited computational capabilities on-board prevent the LGMD model to be accomplished on the robot by its own. Therefore in earlier researches, those micro robots serve only as image grabbers and motion actuators, leaving majority of the model processed on a host device connected. The unavoidable communication and consequent latency have become the bottlenecks that restrains the employment of this promising collision avoidance model in multi-agent research fields such as swarm robotics. This research focuses on the embedded modelling and realization of this bio-inspired collision sensitive model ELGMD. By carefully considering the required on-board resource, a novel micro robot Colias IV is designed to meet the requirements. Featured with the sufficient computing power, various of sensing modalities including a tiny camera, the modularized design and other specialities, this robot has become an advantageous platform to perform embedded vision tasks. The bio-inspired neural model Embedded-LGMD (ELGMD) is realized on the micro robot that can run autonomously without any off-board guidance. Optimization on the structure and timing has guaranteed its computational efficiency. The performance of the ELGMD and the effectiveness on triggering the robot's collision avoidance behaviour are tested via systematic experiments. To achieve more precise interactive behaviours with other kinds of moving obstacles, a compound motion detection system is realized within the robot to detect various of motion patterns by integrating several neural models at a higher level, in which those LGMD-like neural models are accomplished by an unified ELGMD model with minimum reconfiguration. Experiments have been conducted to validate the improved ELGMD model and the compound motion detection system. Results of this research have demonstrated the design goals of all the proposed modules, including the hardware platform, the bio-inspired model and the compound motion detection system, indicating the practicability of implementing these bio-inspired visual motion sensing systems for further robotic studies.

Visual inspection of defects is an important part of quality assurance in many fields of production. It plays a very useful role in industrial applications in order to relieve human inspectors and improve the inspection accuracy and hence increasing productivity. Research has previously been done in defect classification of wood veneers using techniques such as neural networks, and a certain degree of success has been achieved. However, to improve results in tenus of both classification accuracy and running time are necessary if the techniques are to be widely adopted in industry, which has motivated this research. This research presents a method using rough sets based neural network with fuzzy input (RNNFI). Variable precision rough set (VPRS) method is proposed to remove redundant features utilising the characteristics of VPRS for data analysis and processing. The reduced data is fuzzified to represent the feature data in a more suitable foml for input to an improved BP neural network classifier. The improved BP neural network classifier is improved in three aspects: additional momentum, self-adaptive learning rates and dynamic error segmenting. Finally, to further consummate the classifier, a uniform design CUD) approach is introduced to optimise the key parameters because UD can generate a minimal set of uniform and representative design points scattered within the experiment domain. Optimal factor settings are achieved using a response surface (RSM) model and the nonlinear quadratic programming algorithm (NLPQL). Experiments have shown that the hybrid method is capable of classifying the defects of wood veneers with a fast convergence speed and high classification accuracy, comparing with other methods such as a neural network with fuzzy input and a rough sets based neural network. The research has demonstrated a methodology for visual inspection of defects, especially for situations where there is a large amount of data and a fast running speed is required. It is expected that this method can be applied to automatic visual inspection for production lines of other products such as ceramic tiles and strip steel.