No description available.

No description available.

No description available.

<div>Vacuum is needed in many applications and, there are many types of pumps that can provide the vacuum level needed. One widely used pump is the liquid-ring vacuum pump, which does not involve any solid-solid contacts at interfaces where moving and stationary parts meet. Though liquid-ring vacuum pumps are efficient and robust, manufacturers have aggressive goals on improving efficiency, performance, and range of operations.</div><div> </div><div> In this research, time-accurate computational fluid dynamic (CFD) analyses were performed to study the flow mechanisms in a liquid-ring vacuum pump to understand how it works and how the design can be improved. Based on the understanding gained, a physics based reduced order model was developed for preliminary design of the liquid ring vacuum pumps.</div><div> </div><div> In the CFD analyses, the liquid (water) was modeled as incompressible, the gas (air) as an ideal gas, and turbulence by the shear-stress transport model. The gas-liquid interface was resolved by using the volume-of-fluid method, and rotation of the impeller was enabled by using a sliding mesh. Parameters examined include the suction pressure (75, 300, and 600 Torr) and the impeller's rotational speed (1150, 1450 and 1750 rpm) with the temperature of the gas at the inlet of the suction chamber kept at 300 K and the pressure at the outlet of the exhaust chamber kept at one atmosphere. The CFD solutions generated were verified via a grid sensitivity study and validated by comparing with experimental data. When compared with experiments, results obtained for the flow rate of the gas ingested by the pump had relative errors less than 6\% and results obtained for the power consumed by the pump had relative errors less than 13\%.</div><div> </div><div> Results obtained show the shape of the liquid ring to play a dominant role in creating the expansion ratio or the vacuum needed to draw air into the pump through the suction port and the compression ratio needed to expel the air through the discharge ports. Results were generated to show how centrifugal force from rotation and how acceleration/deceleration from the difference in pressure at the pump's inlet and outlet along with the eccentricity of the impeller relative to the pump's housing affect the shape of the liquid ring. Results were also generated to show how the rotational speed of the impeller and the pressure at the suction port affect the nature of the gas and liquid flow in the pump and the pump’s effectiveness in creating a vacuum. </div><div> </div><div> With the knowledge gained from the CFD study, a physics-based reduced-order model was developed to predict air ingested and power consumed by the pump as well as the liquid ring shape and pressure of the gas and liquid in the pump as a function of design and operating parameters. This model was developed by recognising and demonstrating that the amount of air ingested and power consumed by the pump is strongly dependent on the shape and location of the liquid ring surface. The flow rates of the gas ingested by the pump and the power consumed by the pump predicted by the model were compared with experimental data and relative errors were less than 12\% and 17\% respectively.</div>

No description available.

Em inúmeras aplicações práticas da engenharia a camada interfacial entre dois fluidos é de extrema importância para a correta caracterização do escoamento. Especificamente na Engenharia Ambiental e Hidráulica na interface entre o ar e a água existem propriedades capazes de relacionar a aeração e oxigenação. Focado na dinâmica dos processos turbulentos, o estudo proposto se aplica a problemas de sub-pressão em vertedores e visa analisar a troca de gases da interface ar-água em situações de fases dispersas e avaliar a qualidade da água a jusante dos mesmos. O objetivo maior é descrever a relação entre o comportamento da superfície da água, o desenvolvimento da camada limite e os regimes de escoamento de acordo com a vazão volumétrica. Para representar a distribuição da fração de vazios da fase dispersa, foram usados os princípios da formulação dos escoamentos em vertedores escalonados e da formulação para enlaçamento de ar. As argumentações e justificativas das formulações propostas para os perfis de concentrações foram baseadas na distribuição da fração de vazios prevista numericamente. A abordagem numérica do problema fluidodinâmico diferencia da maioria dos estudos concentrados na literatura, por estar baseada na quebra da superfície livre. / In many pratical aplications of engineering the interfacial layer between two fluids has a strong relevance in the process of right measurements of the flow. Espeficically in the enviromental and hydraulics engineering the interface between air and water is the property related with oxigen and areation of the flow. With focus on the dynamics of the turbulent processes, the proposed study is applied to sub-pressure problems in spillways. It investigates the gases exchange in the air- water interface in the dispersed phase and evaluate the water quality downstream. The major goal is to describe a relation between the boundary layer development and the flow regimes with discharge. To represent the distribution of void fractions of the dispersed phase, the physical formulation concepts of stepped spillways and entrapped air were used. The arguments and reasons to justify the proposed concentration profile formulation are based on the numerical provided void fraction distribution. The results as well as the physical model are in good agrement with described literature data. The Numerical approach of the fluid dynamics problem differs from major of described literature studies because it is based on the surface breakup.

Em inúmeras aplicações práticas da engenharia a camada interfacial entre dois fluidos é de extrema importância para a correta caracterização do escoamento. Especificamente na Engenharia Ambiental e Hidráulica na interface entre o ar e a água existem propriedades capazes de relacionar a aeração e oxigenação. Focado na dinâmica dos processos turbulentos, o estudo proposto se aplica a problemas de sub-pressão em vertedores e visa analisar a troca de gases da interface ar-água em situações de fases dispersas e avaliar a qualidade da água a jusante dos mesmos. O objetivo maior é descrever a relação entre o comportamento da superfície da água, o desenvolvimento da camada limite e os regimes de escoamento de acordo com a vazão volumétrica. Para representar a distribuição da fração de vazios da fase dispersa, foram usados os princípios da formulação dos escoamentos em vertedores escalonados e da formulação para enlaçamento de ar. As argumentações e justificativas das formulações propostas para os perfis de concentrações foram baseadas na distribuição da fração de vazios prevista numericamente. A abordagem numérica do problema fluidodinâmico diferencia da maioria dos estudos concentrados na literatura, por estar baseada na quebra da superfície livre. / In many pratical aplications of engineering the interfacial layer between two fluids has a strong relevance in the process of right measurements of the flow. Espeficically in the enviromental and hydraulics engineering the interface between air and water is the property related with oxigen and areation of the flow. With focus on the dynamics of the turbulent processes, the proposed study is applied to sub-pressure problems in spillways. It investigates the gases exchange in the air- water interface in the dispersed phase and evaluate the water quality downstream. The major goal is to describe a relation between the boundary layer development and the flow regimes with discharge. To represent the distribution of void fractions of the dispersed phase, the physical formulation concepts of stepped spillways and entrapped air were used. The arguments and reasons to justify the proposed concentration profile formulation are based on the numerical provided void fraction distribution. The results as well as the physical model are in good agrement with described literature data. The Numerical approach of the fluid dynamics problem differs from major of described literature studies because it is based on the surface breakup.

Sécuriser un approvisionnement fiable de micro-algues est récemment devenu un enjeu industriel. Pour assurer la croissance de micro-algues dans des photobioréacteurs clos, un transfert de masse optimum de l'oxygène et du dioxyde de carbone doit être assuré. Dans cette thèse, une étude du transfert de masse gaz-liquide dans les conduites horizontales a été menée. Dans les trois premiers chapitres, un modèle unidimensionnel de transfert de masse dans le photobioréacteur a été développé. Tout d'abord, le transfert de masse entre une bulle de gaz allongée et un écoulement liquide turbulent a été 'étudié expérimentalement. En considérant l'interface comme étant plane, les coefficients de transfert de masse mesurés sont proches d'une corrélation de Lamourelle (1972). Le modèle de Taitel pour les écoulements stratifiés a été comparé à des modèles plus complets pour la prédiction de l'interface des bulles allongées. Une approche analytique basée sur un bilan de masse et utilisant les modèles testés a ensuite été développée et adaptée à un photobioréacteur afin de prédire l'efficacité de la conversion du CO2 en biomasse en fonction des paramètres d'exploitation. Les deux derniers chapitres visent à développer une simulation numérique du transfert de masse gaz-liquide. Une mesure de la concentration en CO2 dans le sillage d'une bulle de gaz ascendante a été effectuée à l'aide d'une méthode améliorée de traitement des données de Fluorescence Induite par Plan Laser (FIPL). Enfin, une simulation numérique a été réalisée sous COMSOL / Securing a reliable supply of microalgae has recently become an industrial stake. To ensure successful growing of microalgae in enclosed, tubular photobioreactor systems as in Microphyt, an optimum mass transfer of oxygen and carbon dioxide should be secured. In this thesis an investigation of the gas-liquid mass transfer in horizontal pipes has been conducted. In the first three chapters, a one dimensional mass transfer model in horizontal gas-liquid flows will be developed and applied to horizontal photobioreactors. Firstly, a study of mass transfer between an elongated gas bubble under a turbulent liquid flow immobilized in a duct has shown that under the hypothesis considering the interface as a flat plane estimated, the measured mass transfer coefficients appear to be well fitted by a correlation from Lamourelle (1972). The interface prediction for stratified flows have been compared to more complete unit-cell models for intermittent flow interface and found to be a good first estimate. The photobioreactor’s conversion efficiency of CO2 into biomass as a function of operating parameters is investigated using an analytical approach to complete the mass balance and classical two-phase flow approach from Taitel (1976). The last two chapters aim at developing a numerical simulation of gas-liquid mass transfer. A measurement of CO2 wake structures behind free rising bubbles have realized using an improved data treatment method for Planar laser-induced fluorescence (PLIF) and pH sensitivity of fluorescein sodium. Finally, an implementation of the experimental measurements under COMSOL has been realised

The aim of the current study is to model (non-wetting) liquid flow in a packed bed under the influence of gas flow. It has been observed experimentally that non-wetting liquid flows in a packed bed in form of small droplets and rivulets falling through the void regions. Continuum models have not been successful in predicting liquid flow paths when the liquid is injected through a point source in the packed bed. In the current study, we present a discrete deterministic model for modeling the liquid flow in a packed bed, under the influence of gas flow. When a high velocity gas blast in injected into a dry packed bed, a cavity or a void is formed in front of the nozzle. The cavity size increases with increasing gas velocity and exhibits hystersis in size upon increasing and decreasing gas flow rate. The cavity size is very important in determining the gas penetration into the packed bed. A proper gas flow profile prediction is necessary for determining it’s effect on the liquid flow behavior. Attempts at modeling cavity sizes have mostly been confined to experimental studies and development of correlations. Different correlations show different dependence on operating as well as bed parameters and a fundamental understanding of the cavity formation and hystersis phenomena is missing. We adopt a combined Eulerean-Lagrangian approach to study the above mentioned phenomena mathematically. Gas is modeled as a continua and solid as discrete (soft sphere D.E.M. approach). Hystersis and cavity formation studies are carried out in a 2D-slot rectangular packed bed. A discrete deterministic liquid flow model (developed and validated under structured packing conditions using x-ray radiography flow visualization technique), is used to study the effect of presence of liquid on the dry bed void size, when liquid is injected in a packed bed through a point source. It is found that the gas pushes the liquid away from the nozzle side wall. Also, the cavity sizes during gas velocity decreasing case are found to be larger in size than the void size obtained during velocity increasing case for the same inlet gas flow rate. This difference is void size leads to more gas penetration into the bed and thus more liquid shift away from the nozzle side wall. Presence of liquid is found to affect the void size (compared to dry bed size) negligibly.

Les réactions de catalyse hétérogène impliquant un gaz et un liquide sont mises en oeuvre dans des réacteurs à lit fixes. Ces réacteurs peuvent être assimilés à un milieu poreux. La nature complexe de ce milieu rend la compréhension des interactions entre phases difficile, et nécessite une étude exhaustive à l’échelle globale et locale afin d’identifier les paramètres clés de l’hydrodynamique, des transferts de chaleur et de matière. Nous avons donc développé une cellule miniaturisée bidimensionnelle transparente, qui permet l’observation directe des écoulements avec une très bonne résolution spatiale et temporelle. En faisant varier le débit total et le rapport des débits gaz/liquide, nous avons mis en évidence l’apparition des régimes ruisselant et pulsé, observés par ailleurs dans des systèmes tridimensionnels. Grâce à une méthode d’analyse d’image, nous sommes capables de quantifier et cartographier la saturation liquide locale apparente et la morphologie des phases. L’analyse des variances a permis d’étudier les transitions de régimes pour différentes propriétés de la phase liquide. Cette approche a permis de comparer avec la littérature, mais aussi de s’intéresser aux mécanismes de génération et propagation des instabilités lors des transitions. Il a été mis en évidence que l’apparition des instabilités responsables de la déstabilisation du régime ruisselant intervient pour un nombre deWeber liquide fixé, indiquant que le régime pulsé apparait suite à la déstabilisation des interfaces gaz /liquides par les forces inertielles. Enfin, une étude préliminaire des transferts thermiques dans la cellule a été réalisée. La cellule est utilisée pour réaliser la réaction exothermique d’hydrogénation de l’alpha-methylstyrène. Un modèle simple de transferts thermique a été utilisé pour caractériser l’augmentation de température dans la cellule. Bien que cette approche ne permette pas des mesures quantitatives, elle ouvre à la perspective de suivi de transferts thermiques par caméra infra-rouge. / Heterogeneously catalyzed reactions involving a gas and a liquid phase are frequently achieved in fixed bed reactors. These reactors can be described as a porous medium. The complex nature of this medium makes the understanding of the interplay between phases difficult, and requires a thorough study at the global andlocal scale to identify the key parameters of hydrodynamics, mass and heat transfers. Therefore, we have developed a miniaturized two-dimensional system that is transparent to allow the direct observation of the flow with very high spatial and temporal resolution. While varying the total flow rate and the gas/liquid flow rate ratio, we observe the appearance of the trickle and the pulse flow regime, which can be observed in threedimensional beds. Thanks to some image analysis techniques, we are able to quantify and to map the local apparent liquid saturation and the morphology of the phases. Variances analysis allowed the study of the transition for different liquid properties. This approach allowed the comparison with the existing state of art, but also the study of the onset and propagation mechanisms of the instabilities during the transition. We report that the onset of instabilities responsible for the destabilization of the trickle flow regime occurs at a fixed Weber number. This indicates that the pulsed regime is due to the destabilization of the gas/liquid interface by inertial forces. Finally, a preliminary study of thermal transfers in the device was realized. The device was used to perform the exothermic hydrogenation of alpha-methylstyrene. A simple model is used to characterize the temperature increase in the device. Although this approach does not allow quantitative measurements, it opens up the perspective of monitoring thermal transfers with an infra-red camera.