Le fromage fondu est issu de la seconde transformation du lait. Sa fabrication implique le mélange, le chauffage et la texturation de produits laitiers (fromage, beurre et poudres de lait) et non laitiers (agents émulsifiants, acide citrique et chlorure de sodium). Le résultat est un produit homogène, généralement tartinable et à la durée de conservation longue, souvent supérieure à 6 mois. Au cours de la fabrication et du stockage, les réactions d’oxydation des lipides, de caramélisation et de Maillard forment des composés odorants dont certains sont potentiellement indésirables pour la flaveur du produit. Dans le cadre du projet ANR-06-PNRA-023 Réactial, une démarche méthodologique a été mise en place afin : (i) d’identifier les marqueurs réactionnels précurseurs ou responsables des défauts de flaveur observés, (ii) de suivre l’évolution de ces marqueurs au cours des traitements thermiques appliqués, (iii) d’établir un schéma réactionnel observable en vue (iv) de la modélisation et de la prédiction de l’évolution des marqueurs réactionnels et indirectement de l’apparition de défauts de flaveur. Ceci a nécessité la mise au point d’une formulation de matrice de fromage fondu modèle ainsi que l’élaboration d’une cellule de traitement thermique. Différents couplages de chromatographie en phase gazeuse à l’olfactométrie ont été utilisés afin d’identifier les composés odorants. La chromatographie bidimensionnelle systématique couplée à la spectrométrie de masse à temps de vol a permis une semi-quantification des composés traces et ultra-traces tandis que les précurseurs ont été quantifiés par chromatographie liquide haute performance. Les données ainsi obtenues ont permis l’écriture d’un schéma réactionnel observable qui a donné lieu à une modélisation stoechio-cinétique multi-réponses. Un ajustement des données expérimentales par le modèle a pu être réalisé malgré une quantification partielle des différents constituants. / Processed cheese derives from a secondary milk processing step that involves mixing and heating dairy (cheese, butter and milk powders) and non-dairy products (emulsifiers). This processing yields a homogeneous product, usually spreadable, with a shelf-life often longer than 6 months. During processing and storage, lipid oxidation, caramelization and Maillard reactions occur and produce odour-active compounds. Some of them are potentialy involved in the development of odour defects. As part of the ANR-06-PNRA-023 Réactial project, a methodological approach was used in order to (i) identify key compounds responsible for the flavor defects observed, (ii) monitor the evolution of these markers during the heat treatment applied to the cheese matrix, (iii) establish an observable reaction scheme, (iv) model and predict the evolution of these compounds during thermal operations. To do this, a model cheese and its cooking cell were elaborated. Various couplings of gas chromatography with olfactometry were used to identify odorous compounds. Two-dimensional comprehensive chromatography allowed a semi-quantitation of trace and ultra-trace compounds, while precursors were quantitated by high performance liquid chromatography. An observable reaction scheme was extracted from these data and make the multi-response modelling step possible despite a partial quantitation of the volatile compounds.

Os hidrocarbonetos policíclicos aromáticos nitrados (nitro-HPAs) são potencialmente genotóxicos, por isso existe um grande interesse na determinação analítica desses compostos no material particulado no ar. Os nitro-PAHs são emitidos diretamente para a atmosfera pela combustão incompleta ou podem ser formados in situ a partir dos HPAs precursores. Neste trabalho, são apresentados os resultados obtidos no desenvolvimento de um método de análise de nitro-HPAs (1-nitronaftaleno, 2-nitronaftaleno, 1-nitropireno, 2-nitropireno, 2-nitrofluoranteno, 3-nitrofluoranteno, 1,3-dinitropireno, 1,6- dinitropireno, 2-nitrofluoreno, 6-nitrocriseno, 7-nitrobenzo(a)antraceno, 9- nitroantraceno e 9-nitrofenantreno) por GCxGC. A separação destes compostos por GCxGC pode simplificar a etapa de pré-tratamento do extrato orgânico oriundo do material particulado no ar. A GCxGC promove a separação em duas colunas com mecanismos de separação diferentes, conectadas em série, o que resulta em uma capacidade de separação maior. O sistema GCxGC empregado neste trabalho possui um injetor com programação de temperatura (PTV), um modulador criogênico de dois jatos de CO2 líquido (Dual Jet) e um detector por ionização em chama (FID). A separação foi feita empregando a fase estacionária apolar 5% fenil polisilfenilene siloxano na primeira coluna (30 m / 0,25 mm / 0,25 µm) e a semipolar 14% cianopropilfenil polisiloxano na segunda coluna (1 m / 0,10 mm / 0,10 µm). Diferentes condições cromatográficas foram testadas, como: programação de temperatura no PTV, de 40-90ºC até 350ºC, com taxa de aquecimento de 2,2 e 14,5ºC/s; programação de temperatura no forno, de 40-90ºC até 300ºC, com taxa de aquecimento de 2, 2,5 e 3ºC/min; períodos de modulação de 3, 4 e 5s. O volume injetado foi 2µL, no modo splitless; a vazão do gás de arraste (He) foi constante e igual a 1 mL/min e o detector FID foi operado em 120 Hz. As larguras de pico medidas em 10% da altura variaram de 167 a 350ms para 1- nitronaftaleno e 6-nitrocriseno, respectivamente, e a capacidade de pico para o conjunto de colunas de separação usado foi estimada em cerca de 9800. Parâmetros de validação, tais como os limites de detecção (200 a 500 ng/mL) e de quantificação (650 a 1600 ng/mL) para alguns nitro-HPAs foram determinados. Para a quantificação, foram testados os métodos por padronização interna e externa, sendo que, através dos resultados deste trabalho, pode-se mostrar que a determinação de nitro-HPAs por GCxGC com o modulador empregado é possível se for feita através do método de padronização interna. O sistema GCxGC empregado causou dificuldades operacionais, principalmente na conexão das colunas e na modulação. Perdas de massa de analito foram detectadas nas análises por GCxGC, muito provavelmente causadas por uma conexão parcial das colunas. Isso poderia ser evitado se a conexão fosse feita pela fusão das colunas a um conector de vidro adequado a essa finalidade. Picos modulados divididos foram observados com frequência, o que comprometeu a precisão e exatidão dos resultados. A divisão dos picos ocorreu de modo aleatório dificultando a identificação da causa mais provável para a sua ocorrência. Cromatogramas GCxGC de extratos orgânicos não fracionados de particulados no ar, oriundos de queima direta de palha de cana-de-açúcar, de região afetada pela queima de cana-de-açúcar e de área urbana da cidade de São Paulo, mostraram a potencialidade do método / Nitro-polycyclic aromatic hydrocarbons (nitro-PAHs) are potentially genotoxic, so there is a great interest in the analytical determination of these compounds in airborne particulate matter. The nitro-PAHs are emitted directly into the atmosphere by incomplete combustion or may be formed in situ from PAHs. In this work, results obtained from the development of an analytical method for nitro-PAHs by GCxGC are presented. The nitro-PAHs studied were: 1- nitronaphthalene, 2-nitronaphthalene, 1-nitropyrene, 2-nitropyrene, 2- nitrofluoranthene, 3-nitrofluoranthene, 1,3-dinitropyrene, 1,6-dinitropyrene, 2- nitrofluorene, 6-nitrochrysene, 7-nitrobenzo(a)anthracene, 9-nitroanthracene and 9- nitrophenanthrene. The separation of these compounds by GCxGC should simplify the pretreatment step of the airborne particulate organic extract. In GCxGC two capillary columns of different mechanisms of separation are coupled by an interface called modulator, which increase significantly the chromatographic resolution. The GCxGC system used in this work is equipped with a PTV injector, a dual-stage double jets CO2 cryogenic modulator and a flame ionization detector (FID). The separation was carried out using a nonpolar stationary phase 5% methyl phenyl polysiloxane in the first column (30 m / 0.25 mm / 0.25 µm) and a semipolar 14% cyanopropyl phenyl dimethyl polysiloxane in the second column. Different chromatographic conditions were tested: the PTV was programmed from 40-90ºC to 350ºC at 2.2 and 14.5ºC/s; the oven was programmed from 40-90ºC to 350ºC at 2.0, 2.5 and 3.0ºC/min; the modulation periods tested were 3, 4 and 5s. The injected volume was 2µL in splitless mode, the carrier gas (He) flow rate of 1 mL/min was constant and the FID detector was operated at 120 Hz. Validation parameters, such as the limit of detection (200 - 500 ng/mL) and quantitation (650 - 1600 ng/mL) were determined. For quantification, the internal and external standardization methods were tested, and through the results of this study, it can be shown that the determination of nitro-PAHs by GCxGC with the modulator used is possible if made by internal standardization method. The GCxGC system presented operational difficulties, particularly in the column connection and in the modulation zone. A partial connection of the columns resulted in mass loss of the analytes. The connection of the columns could be more effective if it was made by fusing the columns to a glass connector suitable for this purpose. Divided modulated peaks were frequently observed, which compromised the precision and accuracy of the results. The division of the peaks occurred randomly hindering the identification of the most likely cause for its occurrence. GCxGC chromatograms corresponding to unfractionated organic extracts of airborne particulate material from the sugarcane straw burning, from an area impacted by sugar cane burning emissions and from an urban area of São Paulo City showed the capability of the method.

Os hidrocarbonetos policíclicos aromáticos nitrados (nitro-HPAs) são potencialmente genotóxicos, por isso existe um grande interesse na determinação analítica desses compostos no material particulado no ar. Os nitro-PAHs são emitidos diretamente para a atmosfera pela combustão incompleta ou podem ser formados in situ a partir dos HPAs precursores. Neste trabalho, são apresentados os resultados obtidos no desenvolvimento de um método de análise de nitro-HPAs (1-nitronaftaleno, 2-nitronaftaleno, 1-nitropireno, 2-nitropireno, 2-nitrofluoranteno, 3-nitrofluoranteno, 1,3-dinitropireno, 1,6- dinitropireno, 2-nitrofluoreno, 6-nitrocriseno, 7-nitrobenzo(a)antraceno, 9- nitroantraceno e 9-nitrofenantreno) por GCxGC. A separação destes compostos por GCxGC pode simplificar a etapa de pré-tratamento do extrato orgânico oriundo do material particulado no ar. A GCxGC promove a separação em duas colunas com mecanismos de separação diferentes, conectadas em série, o que resulta em uma capacidade de separação maior. O sistema GCxGC empregado neste trabalho possui um injetor com programação de temperatura (PTV), um modulador criogênico de dois jatos de CO2 líquido (Dual Jet) e um detector por ionização em chama (FID). A separação foi feita empregando a fase estacionária apolar 5% fenil polisilfenilene siloxano na primeira coluna (30 m / 0,25 mm / 0,25 µm) e a semipolar 14% cianopropilfenil polisiloxano na segunda coluna (1 m / 0,10 mm / 0,10 µm). Diferentes condições cromatográficas foram testadas, como: programação de temperatura no PTV, de 40-90ºC até 350ºC, com taxa de aquecimento de 2,2 e 14,5ºC/s; programação de temperatura no forno, de 40-90ºC até 300ºC, com taxa de aquecimento de 2, 2,5 e 3ºC/min; períodos de modulação de 3, 4 e 5s. O volume injetado foi 2µL, no modo splitless; a vazão do gás de arraste (He) foi constante e igual a 1 mL/min e o detector FID foi operado em 120 Hz. As larguras de pico medidas em 10% da altura variaram de 167 a 350ms para 1- nitronaftaleno e 6-nitrocriseno, respectivamente, e a capacidade de pico para o conjunto de colunas de separação usado foi estimada em cerca de 9800. Parâmetros de validação, tais como os limites de detecção (200 a 500 ng/mL) e de quantificação (650 a 1600 ng/mL) para alguns nitro-HPAs foram determinados. Para a quantificação, foram testados os métodos por padronização interna e externa, sendo que, através dos resultados deste trabalho, pode-se mostrar que a determinação de nitro-HPAs por GCxGC com o modulador empregado é possível se for feita através do método de padronização interna. O sistema GCxGC empregado causou dificuldades operacionais, principalmente na conexão das colunas e na modulação. Perdas de massa de analito foram detectadas nas análises por GCxGC, muito provavelmente causadas por uma conexão parcial das colunas. Isso poderia ser evitado se a conexão fosse feita pela fusão das colunas a um conector de vidro adequado a essa finalidade. Picos modulados divididos foram observados com frequência, o que comprometeu a precisão e exatidão dos resultados. A divisão dos picos ocorreu de modo aleatório dificultando a identificação da causa mais provável para a sua ocorrência. Cromatogramas GCxGC de extratos orgânicos não fracionados de particulados no ar, oriundos de queima direta de palha de cana-de-açúcar, de região afetada pela queima de cana-de-açúcar e de área urbana da cidade de São Paulo, mostraram a potencialidade do método / Nitro-polycyclic aromatic hydrocarbons (nitro-PAHs) are potentially genotoxic, so there is a great interest in the analytical determination of these compounds in airborne particulate matter. The nitro-PAHs are emitted directly into the atmosphere by incomplete combustion or may be formed in situ from PAHs. In this work, results obtained from the development of an analytical method for nitro-PAHs by GCxGC are presented. The nitro-PAHs studied were: 1- nitronaphthalene, 2-nitronaphthalene, 1-nitropyrene, 2-nitropyrene, 2- nitrofluoranthene, 3-nitrofluoranthene, 1,3-dinitropyrene, 1,6-dinitropyrene, 2- nitrofluorene, 6-nitrochrysene, 7-nitrobenzo(a)anthracene, 9-nitroanthracene and 9- nitrophenanthrene. The separation of these compounds by GCxGC should simplify the pretreatment step of the airborne particulate organic extract. In GCxGC two capillary columns of different mechanisms of separation are coupled by an interface called modulator, which increase significantly the chromatographic resolution. The GCxGC system used in this work is equipped with a PTV injector, a dual-stage double jets CO2 cryogenic modulator and a flame ionization detector (FID). The separation was carried out using a nonpolar stationary phase 5% methyl phenyl polysiloxane in the first column (30 m / 0.25 mm / 0.25 µm) and a semipolar 14% cyanopropyl phenyl dimethyl polysiloxane in the second column. Different chromatographic conditions were tested: the PTV was programmed from 40-90ºC to 350ºC at 2.2 and 14.5ºC/s; the oven was programmed from 40-90ºC to 350ºC at 2.0, 2.5 and 3.0ºC/min; the modulation periods tested were 3, 4 and 5s. The injected volume was 2µL in splitless mode, the carrier gas (He) flow rate of 1 mL/min was constant and the FID detector was operated at 120 Hz. Validation parameters, such as the limit of detection (200 - 500 ng/mL) and quantitation (650 - 1600 ng/mL) were determined. For quantification, the internal and external standardization methods were tested, and through the results of this study, it can be shown that the determination of nitro-PAHs by GCxGC with the modulator used is possible if made by internal standardization method. The GCxGC system presented operational difficulties, particularly in the column connection and in the modulation zone. A partial connection of the columns resulted in mass loss of the analytes. The connection of the columns could be more effective if it was made by fusing the columns to a glass connector suitable for this purpose. Divided modulated peaks were frequently observed, which compromised the precision and accuracy of the results. The division of the peaks occurred randomly hindering the identification of the most likely cause for its occurrence. GCxGC chromatograms corresponding to unfractionated organic extracts of airborne particulate material from the sugarcane straw burning, from an area impacted by sugar cane burning emissions and from an urban area of São Paulo City showed the capability of the method.

Large and ever-increasing numbers of chemicals, including large quantities of a broad spectrum of organic compounds are used in modern society. More than 30 000 of the more than 100 000 chemical substances registered in the EU are estimated to be daily used, of which many will be discharged into the waste-streams handled by municipal sewage treatment plants (STPs). The main objective of the work underlying this thesis was to improve understanding of the relationships between the characteristics of sewage contaminants and their sewage treatment efficiency. Further objectives were to examine the relationships between socio-economic uses of chemicals and sludge quality, and the effects of regulatory actions on sludge quality. The quality of the sewage sludge and the levels and distribution patterns of the sludge contaminants, both within and between the STPs, seem to remain quite constant over time. The overall findings indicate that the levels of contaminants in sewage sludge seem to be largely independent of the location, size and treatment techniques applied at the STPs, and generally, of the types of human activity connected to them. The total and relative concentrations of the sludge contaminants were found to be fairly constant on a dry weight basis, with some exceptions, indicating that the pollutants originate from broad usage and diffuse dispersion rather than (industrial) point sources. The proportion of cyclic methylsiloxanes recovered in sludge seems to strongly depend on their vapour pressure, which decreases with the number of siloxane units. The higher water solubility and biodegradability of organophosphorus flame retardants and plasticizers than polybrominated diphenyl ethers (PBDEs) were also reflected in lower percentages (relative to their national use) found in sludge. Significant time-trends in levels of a-third of the sludge contaminants included in the annual national measurement program were detected over a period of seven years. The levels of compounds displaying significant time-trends generally decreased following declines in the quantities used nationally. However, a quarter of these compounds showed increasing trends, of which the linear methylsiloxanes followed the same trend as used quantities. The decaBDE was also found to be increasing in sludge, probably as a result of the phase-out of pentaBDE and octaBDE. The results indicate that the STP removal efficiency of anthropogenic substances, in Sweden, is generally good and that STPs, at least those in cold climates, do not efficiently remove certain polar contaminants. A non-targeted screening (by use of environmetrics and GCxGC-TOFMS) was performed and found to fulfil the objective to assess the STP removal efficiency, with emphasis to systematically analyse which compound classes that are not efficiently removed using the current STP technology. Many polar aromatic compounds were identified to be poorly removed. The acquired data on levels, profiles and variations in sludge contaminants (sludge quality) extend both the available information and understanding of the degree and nature of sludge contamination, which should help attempts to track changes in its contaminants and revisions, if necessary, of guideline values. This thesis also contributes to improve the knowledge base for the development of future STP technologies, and that archived sewage sludge can be used in retrospective analysis of new and emerging pollutants.

This diploma thesis deals with Bisphenol A, especially with its impact on the aquatic ecosystem. Information about its properties, production and current use are summarized here. Its harmful impact on the environment, especially on the aquatic ecosystem and the human body is characterized. Also the methods of its degradation within the aquatic environment have been described. A summary of the options of a determination of Bisphenol A in water samples is incorporated and the method of gas chromatography with mass spectrometry (GC/TOF MS) and comprehensive two-dimensional gas chromatography with mass spectrometry (GCxGC/TOF-MS) is compared in the experimental part. Analytical determination precedes the isolation of the analyte from the water samples by solid phase extraction (SPE) using SupelcleanTM ENVITM - 18 and derivatization using the silylation reagent, N,O-bis(trimethylsilyl)trifluoroacetamide (BSTFA). The result of this work is the analysis of a series of real samples from wastewater treatment plants Brno Modřice and Luhačovice by a two-dimensional gas chromatography with mass spectrometry (GCxGC/TOF-MS).

The identification of the hydrolysis and photodegradation products of flexible polyurethane foams (PUFs) with addition of biooriginated and biodegradable additive was the first topic of this dissertation work. Separation of polyurethane foam hydrolysis degradation products, designed for ecotoxicological tests, was managed by high-performance liquid chromatography coupled with mass spectrometry (HPLC/MS). The degradations product structure was elucidated by tandem mass spectrometry (MSn). PUF photodegradation products were obtained by exposure of materials by irradiation at 254 nm. Semi-volatile degradation products were isolated from the exposed polyurethane by n-hexane extraction; volatile compounds were collected by solid phase microextraction (SPME). Gas chromatography with mass spectrometry (GC/MS) and complete orthogonal tandem gas chromatography with mass spectrometry (GCxGC/TOF MS) was used for separation and identification of photodegradation products. The influence of the bio-filler on the character of degradation products and the possible effect of PUF degradation products on the environment was discussed at the end of this section. The determination of isoprostanes – markers of oxidative stress in tissues of beadlet anemone (Actinia equina) was the subject of the second topic. F2-isoprostanes were synthesized from the arachidonic acid. With thereby prepared isoprostanes the method of determination by liquid chromatography with tandem mass spectrometry (HPLC/MS/MS) was developed and optimized. The isoprostane isolation process from the Actinia equina tissues was optimized with solid phase extraction (SPE). The resulting methodology was used to quantify isoprostanes in tissues of anemones, which were exposed to both moderate and high temperature changes. The temperature changes were used to initiate the oxidative stress in organisms. In addition, concentration levels of unknown compounds were also monitored. These unknown compounds were extracted from tissues together with F2-isoprostanes and their identity is discussed in this dissertation work too. The possibility of using isoprostane levels in the Anthozoa tissues for the oxidative stress monitoring is discussed in the conclusion of this work.

<p>Crude oil is a mixture of hydrocarbons so complex that it is predicted to comprise as many compounds as there are genes in the human genome. Developing methods to not only recover crude oil from the ground but also to convert crude oil into desirable products is challenging due to its complex nature. Thus, the petroleum industry relies heavily on analytical techniques to characterize the oil in reservoirs prior to enhanced oil recovery efforts and to evaluate the chemical compositions of their crude oil based products. Mass spectrometry (MS) is the only analytical technique that has the potential to provide elemental composition as well as structural information for the individual compounds that comprise petroleum samples. The continuous development of ionization techniques and mass analyzers, and other instrumentation advances, have primed mass spectrometry as the go-to analytical technique for providing solutions to problems faced by the petroleum industry. The research discussed in this dissertation can be divided into three parts: developing novel mass spectrometry-based methods to characterize mixtures of saturated hydrocarbons in petroleum products (Chapters 3 and 5), exploring the cause of fragmentation of saturated hydrocarbons upon atmospheric pressure chemical ionization to improve the analysis of samples containing these compounds (Chapter 4), and developing a better understanding of the chemical composition of crude oil that tightly binds to reservoir surfaces to improve chemically enhanced oil recovery (Chapter 6). </p>