Yes / A milk pasteurization process, a nonlinear process and multivariable interacting system, is difficult to control by the conventional on-off controllers since the on-off controller can handled the temperature profiles for milk and water oscillating over the plant requirements. The multi-variable control approach with model predictive control (MPC) is proposed in this study. The proposed algorithm was tested for control of a milk pasteurization process in three cases of simulation such as set point tracking, model mismatch, difference control and prediction horizons, and time sample. The results for the proposed algorithm show the well performance in keeping both the milk and water temperatures at the desired set points without any oscillation and overshoot and giving less drastic control action compared to the cascade generic model control (GMC) strategy.

A multivariable control technique is proposed for a type of nonlinear system with parameter intervals. The control is based upon the feedback linearization scheme called Generic Model Control, and alters the control calculation by utilizing parameter intervals, employing an adaptive step, averaging control predictions, and applying an interval problem solution. The proposed approach is applied in controlling both a linear and a nonlinear arc welding system as well in other simulations of scalar and multivariable systems.

no / A milk pasteurization process is a nonlinear process and multivariable interacting system. This makes it difficultly to control by the conventional on-off controllers. Even if the on-off controller can managed the milk temperatures in the holding tube and the cooling stage of the plate pasteurizer according to the plant's requirements, the dynamic profiles of the milk temperature are oscillating around a desired value. Consequently, this work is aimed at improving the control performance by a multi-variables control approach with model predictive control (MPC). The proposed algorithm was tested in the case of set point tracking under nominal condition gathered by the real observation. To compare the performance of the MPC controller, a model-based control approach of generic model control (GMC) coupled with cascade control strategy is taken into account. The simulation results demonstrated that a proposed control algorithm performed well in keeping both the milk and water temperatures at the desired set points without any oscillation and overshoot. Because of the predictive control strategy, the control response for MPC was less drastic control action compared to the GMC.

Batch reactor is an essential unit operation in almost all batch-processing industries. Different types of reaction schemes (such as series, parallel and complex) and different order of model complexity (short-cut, detailed, etc. ) result in different sets of model equations and computer coding of all possible sets of model equations is cumbersome and time consuming. In this work, therefore, a general computer program (GBRM - General Batch Reactor Model) is developed to generate all possible sets of equations automatically and as required. GBRM is tested for different types of reaction schemes and for different order of model complexity and its flexibility is demonstrated. The above GBRM computer program is lodged with Dr. I. M. Mujtaba. One of the challenges in batch reactors is to ensure desired performance of individual batch reactor operations. Depending on the requirement and the objective of the process, optimisation in batch reactors leads to different types of optimisation problems such as maximum conversion, minimum time and maximum profit problem. The reactor temperature, jacket temperature and jacket flow rate are the main control variables governing the process and these are optimised to ensure maximum benefit. In this work, an extensive study on mainly conventional batch reactor optimisation is carried out using GBRM coupled with efficient DAEs (Differential and Algebraic Equations) solver, CVP (Control Vector Parameterisation) technique and SQP (Successive Quadratic Programming) based optimisation technique. The safety, environment and product quality issues are embedded in the optimisation problem formulations in terms of constraints. A new approach for solving optimisation problem with safety constraint is introduced. All types of optimisation problems mentioned above are solved off-line, which results to optimal operating policies. The off-line optimal operating policies obtained above are then implemented as set points to be tracked on-line and various types of advanced controllers are designed for this purpose. Both constant and dynamic set points tracking are considered in designing the controllers. Here, neural networks are used in designing Direct Inverse and Inverse-Model-Based Control (IMBC) strategies. In addition, the Generic Model Control (GMC) coupled with on-line neural network heat release estimator (GMC-NN) is also designed to track the optimal set points. For comparison purpose, conventional Dual Mode (DM) strategy with PI and PID controllers is also designed. Robustness tests for all types of controllers are carried out to find the best controller. The results demonstrate the robustness of GMC-NN controller and promise neural controllers as potential robust controllers for future. Finally, an integrated framework (BATCH REACT) for modelling, simulation, optimisation and control of batch reactors is proposed.

Batch reactor is an essential unit operation in almost all batch-processing industries. Different types of reaction schemes (such as series, parallel and complex) and different order of model complexity (short-cut, detailed, etc. ) result in different sets of model equations and computer coding of all possible sets of model equations is cumbersome and time consuming. In this work, therefore, a general computer program (GBRM - General Batch Reactor Model) is developed to generate all possible sets of equations automatically and as required. GBRM is tested for different types of reaction schemes and for different order of model complexity and its flexibility is demonstrated. The above GBRM computer program is lodged with Dr. I. M. Mujtaba. One of the challenges in batch reactors is to ensure desired performance of individual batch reactor operations. Depending on the requirement and the objective of the process, optimisation in batch reactors leads to different types of optimisation problems such as maximum conversion, minimum time and maximum profit problem. The reactor temperature, jacket temperature and jacket flow rate are the main control variables governing the process and these are optimised to ensure maximum benefit. In this work, an extensive study on mainly conventional batch reactor optimisation is carried out using GBRM coupled with efficient DAEs (Differential and Algebraic Equations) solver, CVP (Control Vector Parameterisation) technique and SQP (Successive Quadratic Programming) based optimisation technique. The safety, environment and product quality issues are embedded in the optimisation problem formulations in terms of constraints. A new approach for solving optimisation problem with safety constraint is introduced. All types of optimisation problems mentioned above are solved off-line, which results to optimal operating policies. The off-line optimal operating policies obtained above are then implemented as set points to be tracked on-line and various types of advanced controllers are designed for this purpose. Both constant and dynamic set points tracking are considered in designing the controllers. Here, neural networks are used in designing Direct Inverse and Inverse-Model-Based Control (IMBC) strategies. In addition, the Generic Model Control (GMC) coupled with on-line neural network heat release estimator (GMC-NN) is also designed to track the optimal set points. For comparison purpose, conventional Dual Mode (DM) strategy with PI and PID controllers is also designed. Robustness tests for all types of controllers are carried out to find the best controller. The results demonstrate the robustness of GMC-NN controller and promise neural controllers as potential robust controllers for future. Finally, an integrated framework (BATCH REACT) for modelling, simulation, optimisation and control of batch reactors is proposed. / University Sains Malaysia

The rapid increase in the demand on fresh water due the increase in the world population and scarcity of natural water puts more stress on the desalination industrial sector to install more desalination plants around the world. Among these desalination plants, multistage flash desalination process (MSF) is considered to be the most reliable technique of producing potable water from saline water. In recent years, however, the MSF process is confronting many problems to cut off the cost and increase its performance. Among these problems are the non-condensable gases (NCGs) and the accumulation of fouling which they work as heat insulation materials. As a result, the MSF pumps and the heat transfer equipment are overdesigned and consequently increase the capital cost and decrease the performance of the plants. Moreover, improved process control is a cost effective approach to energy conservation and increased process profitability. Thus, this study is motivated by the real absence of detailed kinetic fouling model and implementation of advance process control (APC). To accomplish the above tasks, commercial modelling tools can be utilized to model and simulate MSF process taking into account the NCGs and fouling effect, and optimum control strategy. In this research, gPROMS (general PROcess Modeling System) model builder has been used to develop the MSF process model. First, a dynamic mathematical model of MSF is developed based on the basic laws of mass balance, energy balance and heat transfer. Physical and thermodynamic properties of brine, distillate and water vapour are included to support the model. The model simulation results are validated against actual plant data published in the literature and good agreement with these data is obtained. Second, the design of venting system in MSF plant and the effect of NCGs on the overall heat transfer coefficient (OHTC) are studied. The release rate of NCGs is studied using Henry’s law and the locations of venting points are optimised. The results reveal that high concentration of NCGs heavily affects the OHTC. Furthermore, advance control strategy namely: generic model control (GMC) is designed and introduced to the MSF process to control and track the set points of the two most important variables in the MSF plant; namely the Top Brine Temperature (TBT) which is the output temperature of the brine heater and the Brine Level (BL) in the last stage. The results are compared to conventional Proportional Integral Derivative Controller (PID) and show that GMC controller provides better performance over conventional PID controller to handle a nonlinear system. In addition, a new control strategy called hybrid Fuzzy-GMC is developed and implemented to control the same aforementioned loops. Its results reveal that the new control outperforms the pure GMC in some areas. Finally, a dynamic fouling model is developed and incorporated into the MSF dynamic process model to predict fouling at high temperature and high velocity. The proposed dynamic model considers the attachment and removal mechanisms of calcium carbonate and magnesium hydroxide with more relaxation of the assumptions. Since the MSF plant stages work as a series of heat exchangers, there is a continuous change of temperature, heat flux and salinity of the seawater. The proposed model predicts the behaviour of fouling based on the physical and thermal conditions of every single stage of the plant.

The rapid increase in the demand on fresh water due the increase in the world population and scarcity of natural water puts more stress on the desalination industrial sector to install more desalination plants around the world. Among these desalination plants, multistage flash desalination process (MSF) is considered to be the most reliable technique of producing potable water from saline water. In recent years, however, the MSF process is confronting many problems to cut off the cost and increase its performance. Among these problems are the non-condensable gases (NCGs) and the accumulation of fouling which they work as heat insulation materials. As a result, the MSF pumps and the heat transfer equipment are overdesigned and consequently increase the capital cost and decrease the performance of the plants. Moreover, improved process control is a cost effective approach to energy conservation and increased process profitability. Thus, this study is motivated by the real absence of detailed kinetic fouling model and implementation of advance process control (APC). To accomplish the above tasks, commercial modelling tools can be utilized to model and simulate MSF process taking into account the NCGs and fouling effect, and optimum control strategy. In this research, gPROMS (general PROcess Modeling System) model builder has been used to develop the MSF process model. First, a dynamic mathematical model of MSF is developed based on the basic laws of mass balance, energy balance and heat transfer. Physical and thermodynamic properties of brine, distillate and water vapour are included to support the model. The model simulation results are validated against actual plant data published in the literature and good agreement with these data is obtained. Second, the design of venting system in MSF plant and the effect of NCGs on the overall heat transfer coefficient (OHTC) are studied. The release rate of NCGs is studied using Henry’s law and the locations of venting points are optimised. The results reveal that high concentration of NCGs heavily affects the OHTC. Furthermore, advance control strategy namely: generic model control (GMC) is designed and introduced to the MSF process to control and track the set points of the two most important variables in the MSF plant; namely the Top Brine Temperature (TBT) which is the output temperature of the brine heater and the Brine Level (BL) in the last stage. The results are compared to conventional Proportional Integral Derivative Controller (PID) and show that GMC controller provides better performance over conventional PID controller to handle a nonlinear system. In addition, a new control strategy called hybrid Fuzzy-GMC is developed and implemented to control the same aforementioned loops. Its results reveal that the new control outperforms the pure GMC in some areas. Finally, a dynamic fouling model is developed and incorporated into the MSF dynamic process model to predict fouling at high temperature and high velocity. The proposed dynamic model considers the attachment and removal mechanisms of calcium carbonate and magnesium hydroxide with more relaxation of the assumptions. Since the MSF plant stages work as a series of heat exchangers, there is a continuous change of temperature, heat flux and salinity of the seawater. The proposed model predicts the behaviour of fouling based on the physical and thermal conditions of every single stage of the plant.